Office Jet Pro 8600 N911a - drivers not displaying on hp support website

Hi there, I am trying to use the hp support pages to find the latest firmware and drivers for the HP Officejet Pro 8600 e-All-in-One Printer - N911a. The  hp driver website is not listing any. There is a whirly wheel that spins but never gives an answer which is a little frustrating. In the past it was a case of clicking on a hyperlink and choosing the download option required. Now the only software to download  interrogates the pc and printer to give suggestions but doesn't give any answers. Can someone please give me a link to the latest win 7 32 bit drivers for the HP Officejet Pro 8600 e-All-in-One Printer - N911a and firmware if there has been an update sinch the original pritner launched. I'll even throw in a pretty please and a smiley  thanks in advance john

The driver download pages for many HP products are currently down, but you can download the full featured Windows 7 x86 drivers for the Officejet Pro 8600 n911 from HP here: http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-3/OJ8600_1315.exe This may not be the latest version and for the firmware update you will need to wait for the HP site to get back up or you can do a firmware update from the front panel of the printer assuming the printer is connected by wired or wireless LAN (not USB). 

Similar Messages

  • My office jet pro 8600 premium will not turn on. help

    My officejet pro 8600 premium will not turn on. I get a message "there is a problem with the printer or ink system. Turn off and back on and if that doesn't work turn off and unplug the power". Turn back on. I have done all instructed to do but it will not bring back the opening menu. Please help.

    Hi @wheelersburg,
    Welcome to the HP Forums!
    I noticed that you are getting the message "there is a problem with the printer or ink system. Turn off and back on and if that doesn't work turn off and unplug the power". With your HP Officejet 8600 premium. I am sorry to hear this but I am happy to help!
    Please take some time and go through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
    Hope this guide is helpful!   
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP Office Jet Pro 8600 N911a

    All of a sudden printer will not work with my computer.  Keep getting error message that states, "cannot communicate with printer" but ran wireless configuration test and it states all is fine.  Have unpluged and shut down all components and restarted with no success.

    Hi @sconsy6155 
    What operating system, and version do you have? Mac or Windows?  If you have a Windows operating system, please run the HP Print and Scan Doctor.
    The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity:
    USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check: Checks for missing or corrupt driver files.
    Device Manager: Checks for problems in Device Manager that would prevent printing.
    Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match: Checks the port settings for the HP product.
    Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings: Checks and adjusts the print quality settings.
    Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests: Checks the scan mechanism, drivers, and registry entries.
    Source:Try the HP Print and Scan Doctor for Windows
    Click here to download and run the Print and Scan Doctor >>>>>> www.hp.com/go/tools
    If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
    If you see only green check marks (), the tool did not find any problems.
    If you see green wrenches (), the utility identified an issue and corrected it automatically.
    If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
    If you see a red X (), follow the on-screen instructions to resolve the issue.
    I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Office Jet Pro 8600 print jobs not printing

    My printer was working wirelessly fine the other day, now it won't work. The laptop I am using is a HP and it will give the message that it is validating the printer, so I press Print and then it says "job successful sent" but nothing prints. When I check the print que there are no jobs waiting to be printed. What must I do to get it working again? I need my printer! Help..

    Welcome to the forums kg6192
    I saw your post about your Officejet 8600 no longer printing wireless. I will help you the best I can with this! Please let me know which operating system you are running on your computer.
    In the meantime, try Resetting the Printer and restarting your computer and trying the print again.
    Also try printing from another program to see if prints will work from elsewhere.
    Tip: Plug the printer in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help.
    Help to find which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Have a great Tuesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • OFFICE JET PRO 8600 PRINTER WILL NOT PRINT - MESSAGE COMES UP SAYS "MISSING OR FAILED PRINTHEAD"

    I have turned it  off / on and removed the printhead and put it back in as instructed but it still will not work and gives me the same message. Does HP have a support line phone #?

    In the US call 1-800-HPINVENt for HP Support.  Elsewhere you can see the information here to Contact HP.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Office Jet Pro 8600 Plus 910 n printer driver does not install on a windows server 2008R2 OS

    I recently had a new server installed, a Proliant with a Windows Server 2008R2 operating system. I now just discovered that my All in One Office Jet Pro 8600 Plus A 910 will not install on the Windows Server 2008 R2, ïncompatible operating system. Does anybody have a workaround or solution?

    Hello dawnp,
    Welcome to the HP Forums.
    I see that you are having an issue with installing the printer on to your Windows 7 computer.
    I suggest that we start off by running the HP Print and Scan Doctor.  If the Doctor fails, please let me know where it failed as well as any error codes you may see.
    Write me back when you have time and I will be happy to help.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Office Jet Pro 8600 all in one

    I fax documents from word with my printer. Every once in a while, but more frequently as of late, the document will fax, shows send in the log, I hear the the fax completely send and hang up, but then it will fax it over and over, even though I only set it to fax one time. Only way then to stop it from sending is to turn off printer and then I either have to reboot my computer or log off to get it to clear. When computer comes back up, I turn printer back on and it is ready for use. It has done this since I bought it, but like I said seems more frequent.
    It is an HP office jet pro 8600 all in one, running on Windows 8.1. It is hard wired, not running wirelesslym with desktop. Anybody have any clues as to what is causing this and how to fix it.  It is so frustrating.  Thanks.

    Hi LFoskey,
    Does the printer send multiple faxes when you fax directly from the printer, or only when you fax from Word?
    You can check for a firmware update in cause the issue is being caused by the printer itself;
    HP Officejet Pro 8600 N911a Firmware
    HP Officejet Pro 8600 N911g_n Firmware (Plus and Premium models)
    Please also try the HP Print and Scan Doctor, it can quickly resolve any issues including but not limited to;
    Driver Check : Checks for missing or corrupt driver files.
    Device Manager : Checks for problems in Device Manager that would prevent printing.
    Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match : Checks the port settings for the HP product.
    Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
    Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
    Please post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle. 
    If you see only green check marks ( ), the tool did not find any problems.
    If you see green wrenches ( ), the utility identified an issue and corrected it automatically.
    If you see yellow exclamation points ( ), the test failed and required user action, but the step was skipped.
    If you see a red X ( ), follow the on-screen instructions to resolve the issue.
    I look forward to hearing from you. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Can't scan from Office Jet Pro 8600

    I can't scan from my Office Jet Pro 8600.  I'm connected to my home Verizon Fios wireless network.  I'm running Windows XP.  The printer works fine, but I can't scan.  When I use the display on the printer I get a "No Computer Found" message.  When I go to find the scanner on the Control Panel/Scanners & Cameras - I can see the printer listed, but when I click on the printer, I get a message that reads: "The scanning software could not be found, or your scanner is not connected.  Please make sure your scanner & your scanner software are properly installed."    So then I use the HP Print & Scan Doctor to download to "Get Installer" presumably to download the software.  After the software downloads, there is no difference.  I still can scan, & the network is not seeing the scanner.  What gives?

    Hello,
    I see that an issue has popped up that pertains to NOT being able to scan.
    Please click on the following link that troubleshoots A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
    Please feel free to write back with any additional questions or concerns.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How do i connect a surface 2 to an office jet pro 8600

    I am trying to connect a surface 2 windows RT 8.1 tablet to an HP office jet pro 8600.  I have down loaded the driver from the HP web site but I get an error message that states it can not be run on this computer, and I should go to the app store. I can't find any special appnfor this.

    Hi 1643, welcome to the HP Forums. Windows RT does not need drivers installed like other versions of Window. It should be just a matter of connecting it with a USB cable, or following the wireless/wired instructions contained in this document:
    Install the Printer Software in Windows RT or Windows 8 on a Tablet.
    Let me know how it goes
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Printers HP Office Jet Pro 8600

    So I've had an Office Jet Pro 8600 for about a year now. It has been great. just recently, the printing started going to black only and when I tried changing the color cartridges and the black cartridge, I could not get it to work right. It eiter printed black ink only, or it stopped and told me to contact HP.
    Bummer.  any idea what I can do for this? 

    Hi Arley2u,
    Welcome to the HP Forums!
    I understand that you can either print in black ink only, or the HP Officejet pro 8600 printer stops, and tells you to contact HP. I am happy to help you with this printing issue!
    For further assistance, I will need to know the following:
    If you are using a Windows or Mac Operating System. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, Ethernet, or USB.
    If the printer is able to make copies by itself.
    If the power cable plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    If the printer can print a test page. Printing a Test Page.
    If the printer's display is showing any error messages/codes.
    Hope to hear from you, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Looking for Solution Center software for my Office Jet Pro 8600 All-in-One

    I have installed the Drivers and Full Feature Software in order to get Solution Center, so that I could scan multiple photos into individual files. It still does not appear as installed. I have an HP DV6-73680L laptop running Windows 8.1.
    FYI, I loaded the software from the link below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&dlc=en&lc=en...

    Maria,
    Just checked again...
    I do not know whether this will make a difference - I did find this:
    HP Officejet Pro 8600 N911a Firmware
    Note the description at the bottom of the page regarding the scanning feature.  It is unlikely that the exact feature you seek is included.  There are times that the description is somewhat lacking in detail.
    Click the Kudos Thumbs-Up to show appreciation and say Thanks.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Wireless printing issue. Lonovo Think Pad v. Office jet pro 8600

    I went through all 7 of the trouble shooting steps but still can't get my wireless printing to work with my Lonovo laptop T430 and my HP office jet Pro 8600 ..last resort was to join the forum so here I am. all connections appear to be on line and as they should be until I try to print a document.  The print window tells me printer is offline but the printer network test tells me it passed all tests and is connected and ready.  Using windows 7 operating system.

    llbbsis, if everything passes my initial concern is that you might not be connected to the same network on your printer as your computer is connected to. So the first thing i would check is being sure that the SSID on both is the same and not something like "NetworkName" and "NetworkName -Guest." 
    Next, have you used the Print and Scan Doctor from HP? It is a good tool to diagnose and treat some of the smaller issues with printing: 
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
    Check those two things first and get back with me, if you need further help I am more than willing to do whatever I can to get the issue at hand taken care of.
    Have a great day! 

  • I only want my HP Office Jet Pro 8600 Plus to print in black and white

    I have an HP Office Jet Pro 8600 plus and I only need it to print out word documents and do not need color. For some reason the printer requires me to refill my yellow ink in order for me to print a document in greyscale. How can I change the settings so this doesn't occur?

    Dear neurogeek,
    Please follow the steps of this document:
    http://support.hp.com/us-en/product/HP-Officejet-Pro-8600-e-All-in-One-Printer-series---N9/4322915/m...
    I hope you find it helpful.
    Greetings.
    * I am not an employee of HP, my work is voluntary.
    If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
    I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
    and click on the icon if you want acknowledge the assistance.

  • How to Scan using your HP Office Jet Pro 8600

    Well, I figured out my own answer because I couldn't find a "solved" topic in this regard. So then I decided to post my findings in order to help the next querier (is that a word = one who queries). FYI -  I am not a 'techie' and while I can find my way around a computer it sometimes takes a while.  Also, I have Windows 7 on this laptop if that makes a difference.
    1. Go to Control Panel and choose:
    2. Hardware and Sound, then
    3. Devices & Printers, then
    4. Fax-HP Office Jet Pro 8600 (Network) or whatever printer choice pertains to your situation, then
    5. HP Printer Assistant, then
    6. Scanner Actions, then
    7. Scan a document or photo, then
    8. Save as PDF
    9. Scan
    10. Save to folder you choose
    I know this may seem simplistic to most of you but maybe someone like me is out there trying to find this out and this might help.
    Roxi
    This question was solved.
    View Solution.

    Hi Acupuncture,
    Thank you very much for posting your solution that you found yourself, on using the scan function on your HP OfficeJet Pro 8600. I also apologize we were not fast enough to answer one of your inquiries on the HP Support Forums. I was able to check your user page but was unable to find your initial post on asking us How to Scan, did you delete the question? Either way I am glad you are now up and scanning from your OJ 8600.
    For future reference I would like you to take a look here: How to Scan: Windows 7, here you will be given all options and shortcuts on scanning with or without the HP software as well as some cool features, like scanning from the front panel of your 8600 and adding multiple pages to a single file.
    Again I appreciate you taking the time to help the other Community members, so Thank you again!!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Hp Office Jet Pro 8600 A910, suddenly can't send fax. Reveiving faxes are ok.

    We can't send any fax, but we can still receive a fax. This happened suddenly without any changes (on device or our telephone line) When sending a fax it dials and gives a busy tone. After that we get a error sheet pointing out Error 388, communication error. Following things we did:- Tried sending fax on our other phone line to rule out broken phone cable/connections.- Called to phone and from phone to fax which worked.- Printed out T90 testsheet. All tests passed.- Tried faxing with ECM off or in other words turned off the error connection mode.- Tried faxing with lower connection speed setting.- Checked other settings to see if there was anything wrong, but all okay.- Powered off, disconnected power cable for at least 15 seconds. Is the fax broken or anything else we can try?

    Hi , I see you have been troubleshooting an issue with your Officejet Pro 8600 no longer able to send faxes, and I think I may have found some more information for you. Can you specify your your exact printer model for me? In your post title you say it is an 'Office Jet Pro 8600 A910' but and A910 is an Officejet 8500A. How Do I Find My Model Number or Product Number? Seems like an odd question, but the printer make a copy? It could be an issue with the scanner mechanism.
     Is the printer connected directly to a wall outlet or is it in a surge protector or a power bar? We want to connect it to a wall outlet just so we can eliminate the power source as the root cause. See this document for more information about Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector (Note: This document is not limited to Laserjet printers.)
     HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to;Get Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 Premium (H711) e-All-in-One Printer SeriesGet Printer Updates for HP Officejet 6500A, and Officejet Pro 8500A e-All-in-One Printer Series Have you tried to run the Fax Test Report? It's usually located in the setup menu, under tools. The fax test report will let you know if it finds any problems and how to correct them. Once everything passes on the fax test report, you can Test Your HP Fax Machine with the HP Fax Test Service.  I reviewed the error code you provided from the Interpreting Error Codes in Fax Communication Error or Fax History Reports document.  Error 388: There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time. Retry the fax reception when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve. Have you touched base with the phone company to make sure they have not changed anything on their end? Does this same error occur with every number you try to dial?  You could see if anything in Fax Sending Fails Intermittently or Fails for Only One Recipient is helpful as well.  Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!   Thanks, 

Maybe you are looking for