Office Jet pro 8610 for windows server 2008 R2

I have the new Office Jet pro 8610 prither but dosn't have the driver for "Windows Server 2008 R2 Enterprise" 64 Bit.
What to do now. Can you please provide ?
Thanks in advance.
This question was solved.
View Solution.

Hi,
The same driver as provided for any Windows OS as Windows 7 or 8 should be used, the installation however should be launch via the command line and not as a standard installation.
Follow these steps to install the printer software on a server:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8610-e-All-in-One-Printer/5367603/model/5367606...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Installing Officejet Pro 8610 on Windows Server 2008 R2

    I am trying to install an HP officejet Pro 8610 in a Windows Server 2008 R2 machine.
    As an FYI the server aleady has an Officejet Pro 8600 installed on it
    I ran the setup.exe from the install CD, as an administrator
    The first window appears and I clikc continue
    The next window appears and I select connect a new printer
    At the Connection options window, I selected Wired network and it displays the correct printer
     I slect the printer and click next and the installation starts and runs for about a minute that displays the following message
    The printer works fine from another PC which is running windows 7 (64-bit)  So I know the problem is not in the printer or the network.
    Any suggestions would be appreciated
    Thanks in advance

    Server 2008 (x86) is supported, and I had an x64 machine set up last month that had FP12 installed and running in IE and Firefox. 64 bit IE wouldn't run it for some reason, but the 32 bit did. It installed in C/Windows/System32/Macromed/Flash and C/Windows/SysWOW64/Macromed/Flash, but I was unable to get the ActiveX plug-in to enable outside of 32 bit IE.
    I also set up a Server 2012 machine that DID support the x64 ActiveX, but that's probably not an option for you.
    Like you, I'd be leery of "hacks" to get it to run as an x64 pkug-in, as it may have unintended and undesired consequences in other areas.

  • Why can't I download drivers for hp office jet pro 8610?

    I just bought the HP office jet pro 8610 and my mac book will not recognize the printer.  When I'm prompted to download drivers, I am told they are unavailable from Apple.  Can anyone help?

    Click HERE and choose your OS X version from the pull down
    ÇÇÇ

  • Setup Microsoft Office 2013 KMS Host on Windows Server 2008 R2

    Hi all,
    hope someone can help, banging my head against a brick wall here.
    Followed this excellent article here -
    http://blogs.technet.com/b/odsupport/archive/2013/01/03/how-to-setup-microsoft-office-2013-kms-host-on-windows-server-2008-r2.aspx#pi47623=1
    Dont need to install 275817 as its already applied to the server that has the KMS install on it.
    When i get to step 3 and double click the exe from the MSDL site i get the cscript window but nothing happens, the window stays blank and then closes, i never get the prompt to enter the licence key for Office 2013 KMS key.
    Its a Windows server 2008 R2 install, fully patched and rebooted.
    Checked the logs and can find nothing, has anyone seen this or know a fix?
    Thanks in advance.

    Hi,
    Thanks for your post.
    Please refer to this MS article and try again.
    Prepare and set up the Office 2013 KMS host
    https://technet.microsoft.com/en-us/library/dn385356.aspx#BMK_PreparetheKMSHost
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • My new HP office jet pro 8610 is LOCKED.

    somehow while setting up my new HP office jet pro 8610  it locked It .
    I am trying to set up internet wireless and i am so frustrated! message states:
    you cannot use the device's built in networking capabilities because these capabilities have been disabled when the device was set up. for more imformation, contact your network administrator who set up the device.
    A simular message comes up for every feture I wish to try on this printer. 
    I am this person. .....
    Does this printer have a master reset? i can not find it. please help so I dont have to put it back into box and return it to the store. thanks Jodanalynn

    Hi @jodanalynn ,
    I see by your post that you need to reset the printer. I will be happy to help you.
    I can send you that information in a private message.
    In the forum beside your handle name just click on the envelope to view it.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610.

    I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610 using Adobe Acrobat Pro 11. I recently purchased the printer. I believe I ame using all of the defaults. How can I correct the problem?

    Hi,
    Both printer and computer seem to be on same network.
    Please download and run the following utility to troubleshoot on the issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
    Also download and install the firmware update from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Does HP Office Jet Pro 8610 Support Adobe .PDF Files?

    Greetings,
    I'm thinking of upgrading from an HP Photosmart Premium C309g-m All-In-One to an HP Office Jet Pro 8610 All-in-One. 
    I was able to create and use .pdf files on the C309g-m.  I have Adobe Reader on my computer.  Will I be able to do the same on the 8610?
    Thanks.
    shamrock838
    This question was solved.
    View Solution.

    shamrock838 wrote:
    ... I was able to create and use .pdf files on the C309g-m.  I have Adobe Reader on my computer.  Will I be able to do the same on the 8610?  
    Hi,
    Looks like you are talking about scanning to PDF.  Yes the 8610 can scan documents as PDF files. My suggestion: spend a bit more for a 8620 or 8630. Please check the following brochure, you will see why my recommendation is a 8620 or 8630.
          http://www.hp.com/hpinfo/newsroom/press_kits/2014/OJPro/OfficejetPro8610_8620_8630.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • New HP Office jet Pro 8610 defaults to FAX when asked to print from my Lenovo.

    New HP Office Jet Pro 8610 worked for 1 day after installation. Printed & Scanned OK both sided. Did not connect for Fax as don't use it. After printing a couple of documents & scanning some from the Lenovo think Pad Laptop the 8610 has suddenly always  defaulted to the fax send page when asked to print any document. Still scans perfectly. I can print the same documents by emailing them to my IPhone then requesting print. Why won't it print docs from the laptop??? What can I do to overcome the problem as its slow to have to go thru the phone. (I'm 89 years old) Please help.     2Wood. 

    Hi @jodanalynn ,
    I see by your post that you need to reset the printer. I will be happy to help you.
    I can send you that information in a private message.
    In the forum beside your handle name just click on the envelope to view it.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Error on clone database, oracle 10g release 2 for windows server 2008

    Hi,
    OS: Windows Server 2008 X64
    Oracle: oracle 10g release r2 for windows server 2008
    An error occurred when creating a database, stop at last step, Screenshot:
    [http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
    the trace log content:
    [main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
    [main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
    [main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
    [main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
    [main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
    [main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
    [main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
    [main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
    [main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
    [main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
    [main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
    [main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
    [main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
    [main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
    [main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
    [main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
    [main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
    [main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
    [main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
    [main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
    [main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
    [main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
    [main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
    [main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
    [main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
    [main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
    [main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
    [main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
    [main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
    [main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
    [Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
    [Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
    [Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
    [Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
    [Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
    [Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
    [Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
    [Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.ora

    Check your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
    ORA-28547 : Connection to server failed, probable Net8 admin error
    thanks
    http://swervedba.wordpress.com/

  • Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

    Hi!
    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
    Thanks...

    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

  • Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008

    Hi,
    I am a little confused because I have Windows Server 2008 64 bit operating system and had installed Oracle 11g 11.1.0.6.0 (x64) prior to the Oracle 11g 11.1.0.7.0 for Windows Server 2008 install package becoming available.
    My database needs no backup of data as it is a fresh installation so its removal is not a problem.
    To now upgrade to Oracle 11g 11.1.0.7.0 for Windows Server 2008 do I need to
    a) Uninstall Oracle 11.1.0.6.0 (x64) and then install Oracle 11.1.0.7.0 on Windows Server 2008
    or
    b) Apply patch 6890831 (will this upgrade from 11.1.0.6.0 x64 to 11.1.0.7.0 for Windows Server 2008?)
    Any help much appreciated as having looked at documentation I am still confused what I need to do.
    Thanks.

    Duplicate post
    Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008
    Please continue with other thread.

  • How to download oracle patch set 10.2.0.5  for Windows server 2008 R2

    I need  download and install oracle patch set 10.2.0.5 and install  for Windows server 2008 R2 (notes 1486772).
    But I  get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
    Help me, please!

    Hi,
    Have you looked at this location https://service.sap.com/oracle-download ?
    Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
    Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
    Regards,
    Bhavik G. Shroff

  • Performance Tuning Guidelines for Windows Server 2008 R2 mistake?

    Hi all,
    I'm reading the "Performance Tuning Guidelines for Windows Server 2008 R2" and I think there is same kind of error. At page 53 there is a sub chapter "I/O Priorities" that explain how to handle I/O priorities.
    In the guide it is said that in the registry I have to have a key:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\{Device GUID}\DeviceParameters\Classpnp\
    Where {Device GUID} I think it is the value I get in device manager under one of my disks -> properties -> details -> "Device Class GUID"
    the trouble is that under the key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\ I've no subkey matching my disk's device class guid! Maybe I'm drunk but I've checked every sub key under HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\
    but neither of them as a subkey named "DeviceParameter"!!
    So am I wrong? 

    Hi Andrea,
    To find the "DeviceParameter", please try to follow the steps below:
    1.Find this registry key and note the DeviceInstance value:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceClasses\
    2.Find the device instance registry key under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum" which contains information about the devices on the system and get the device interface GUID:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\<hardware id>\<instance id>\Device Parameters
    I hope this helps.

  • Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

    We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
    We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
    Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same? 

    Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
    for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
    For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
    CAL licensing method).
    (whether you use per-Device, or per-User, is up to you, it comes down to cost).
    CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
    If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
    If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
    CALs can be tricky to correctly license.
    Here's some introductory reading:
    http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
    And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
    Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
    don't physically do anything with them to own/drive a car.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • What are the netsh cmd line for windows server 2008,2012 ?

    Hi
        I am try to config ip,subnet,gateway,preferred and secondary dns using netsh for windows server 2008,2012,
    Before Netsh cmd support for all os including Win 8,win 8.1.
    I need to config form client machine to server machine using netsh cmd lines,i will try in remote login also like i will give server name,username and password with netsh cmd.Below is sample cmd line,using process i will change ip config.
    netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1
    when i run in windows server using cmd prompt it show error like "some commands line not found in specified file"
    This is my code in asp.net using vb
     Dim pip As New Process()
            Dim pipa As New ProcessStartInfo("netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1")
            pip.StartInfo = pipa
            pip.StartInfo.UseShellExecute = False
            pip.StartInfo.RedirectStandardOutput = True
            pip.Start()
            pip.WaitForExit()
    And if change  ip,subnet and default gateway,internet not work,if i change preferred and secondary dns then only internet work and can browse.
    I can change ip,subnet,gateway,both dns is some other way,below is the link
    http://www.codeproject.com/Questions/795642/How-to-change-IP-Subnet-Gateway-DNS-Prefers-and-al?arn=0
    but what problem is if server is logoff,changes not reflect in server machine,may be it logoff.
    So i need is if server is logoff,need to change ip,subnet,gateway and both dns using netsh or some other vb codings in asp,net.I am try to change ip address form client machine also.
    Pls reply asap
     Regards
         Aravind 

    For the shell scripting I'd try them here.
    Scripting forum on MSDN
    Scripting Guys forum on TechNet
    For the asp.net I'd ask over here.
    Microsoft ASP.Net forums
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Maybe you are looking for