Office outlook won't load following latest upgrade
hi, just turned on my mac air, and find i cannot get my office outlook to load up
Oddly enough. I have the same error. pacman updated alsa-driver yesterday and, since I have a custom kernel 2.4.26, I recompiled using makepkg and installe alsa-driver. I get the folowing when I try to load the modules:
deadface root # modprobe snd-maestro3 snd-pcm-oss
/lib/modules/2.4.26/kernel/sound/acore/snd.o: couldn't find the kernel version the module was compiled for
/lib/modules/2.4.26/kernel/sound/acore/snd.o: insmod /lib/modules/2.4.26/kernel/sound/acore/snd.o failed
/lib/modules/2.4.26/kernel/sound/acore/snd.o: couldn't find the kernel version the module was compiled for
/lib/modules/2.4.26/kernel/sound/acore/snd.o: insmod /lib/modules/2.4.26/kernel/sound/acore/snd.o failed
/lib/modules/2.4.26/kernel/sound/acore/snd.o: insmod snd-pcm-oss failed
I'll try to figure this out this weekend.
Kev
Similar Messages
-
IBook G4 won't load after latest security update, repair doesn't work?
Hi I had the same problem as someone else in this forum:
"Last night I saw that my ibook G4 wanted to do a security update. I told it to do it, and the ibook has not started since. It reset itself after downloaded, but it just stays on the booting up screen, never actually booting up so I can use it. After about two hours of trying to boot up, I turned it off, and on again, and it still wont boot.
I really need suggestions as how I can fix it. Thanks
ibook g4 Windows 2000
Carolyn Samit
Posts: 8,431
From: Alameda CA Bay Farm Island
Registered: Aug 5, 2005
Re: G4 wont boot after latest security upgrade
Posted: May 22, 2009 2:51 PM in response to: voiletmay
Click to reply to this topic Reply email Email
HI,
Ok... you need to boot from your install disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If you cannot boot from your install disk, try booting in Safe Mode
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
If you have the original hard drive in this iBook, it was probably a 60GB drive? When you can do this, check to see how much available disk space there is.
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Not enough available drive space can cause issues like you are experiencing.
Carolyn "
I tried restarting it after the repair (there were some things to repair and I tried to repair twice just to make sure it didn't miss anything) but it still won't load. It says its starting the OX system, but when the blue bar reaches the end, it doesn't do anything from there. I also left it on for hours and it did nothing. My mousepad still lets me move around the mouse, the caps lock key still lights up, as the num lock key. I tried safe mode but that won't load either...any other suggestions?*" I also left it on for hours and it did nothing. "*
Your iBook needs to go in for repairs.
Carolyn -
Safari pages won't load since Mavericks upgrade
Installed Mavericks a few days ago on my iMac and some really annoying bugs have been introduced to Mail (7.3) and Safari (7.0.6). I can't automatically add multiple addresses to emails anymore using the space bar; I have to manually type out certain addresses, add commas, etc. Certain webpages, including youtube and google, won't load on Safari. Chat support had me repair permissions with disk utility, clear cookies and reset safari, but none worked. It was also suggested that I do an SMC reset, a PRAM reset, and a safe reboot. I haven't done any of these, basically because I'm nervous about introducing any more wonkiness that I can't undo. I've been reading about similar problems with Mavericks for months now (I only upgraded because I needed it for Final Cut) , but I never see any solutions. Can anyone help me??? Thanks.
Go step by step and test.
1. Power cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode
http://support.apple.com/kb/PH11212
2 Empty Caches
1. Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
2. Quit Safari if open.
Option click the "Go" menu in the Finder menu bar.
Select "Library" and then "Caches".
Look for the folder 'com.apple.Safari"
Right click "com.apple.Safari" and select "Move to Trash"
Relaunch Safari.
3. Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions
4. Remove all third party addons, plugins and anti-virus software
Run EtreCheck .
https://discussions.apple.com/docs/DOC-6173
5. Deselect Proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
Best. -
Safari won't load after latest software update
After the latest software update from Apple, Safari won't load. I've deleted the p.list and run OnyX to clean the system. It still won't load. This is a pain as Safari is my default browser and I have to get into Safari to change that. Has anyone else had this problem and fixed it?
Thanks!
Quicksilver G4 Mac OS X (10.4.5) 1.5Gb RAMWelcome Pauline;
Actually you can change your default browser from within Mail, just go to Mail preferences and set the default browser to whatever you want. Unless you have cloned your system (before the update)which I heartily recommend,
you may have to use Pacifist to extract Safari from
the 10.4 installation package.
Hope this helps,
Miriam -
My Ipad app doesn't start after the latest upgrade. When will this be fixed? Do I get a credit on my subcription?
Hi,
This is Ian from the revel team. We are working actively with Apple to fix this issue. We are definitely aware of it and trying to fix as soon as possible. I am so sorry for the inconvenience.
Best,
Ian -
My screen on iPhone won't rotate since latest upgrade
My screen on iPhone won't rotate since latest upgrade
Look in the status bar to see if you have accidently turned on the orientation lock. It would be an icon near the battery icon that looks like a small lock with a circular arrow around it. It will also be in the Control Center, when you swipe upwards from the bottom of the phone screen. Top row of icons, the last one on the right. White is on, black is off.
I've also asked the hosts to move your post to an iPhone forum, so you can get more assistance. -
App Store won't load it says loading then just goes to a blank screen someone help please?????
Hello moirafromvirginia water,
The article linked below details a number of troubleshooting steps that can help restore your Mac's connection to the iTunes and App Stores.
Can't connect to the iTunes Store
https://support.apple.com/en-us/HT201400
Regards,
Allen -
ITunes won't load after recent upgrade
I see I'm not the only one with this problem. I've been through the FAQ and removed and downloaded iTunes and Quicktime separately multiple times, but iTunes won't load. It will be difficult to buy more songs like this.
I've a Sigma Tel Audio driver installed by Dell. I'm running McAfee anti virus. Let me know what other info will help somebody to help me solve this.
Thanks.a few questions before proceeding.
are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
or are you getting no error messages whatsoever when you try to launch itunes?
if no error message, a few more preliminary questions aimed at narrowing in on possible culprits.
(1) do you have Norton Internet Security 2005 installed on the PC?
(2) try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)
(3) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds? -
Xml pages won't load using latest Firefox 7, worked fine in earlier versions
A web app that loads and displays xml files using javascript and xsl stylesheets is breaking since upgrading to Firefox 7.
These pages load successfully using Firefox 3 and 4, and all versions of IE.
I can't figure out why, bit it breaks when returning to pages that have already been successfully loaded.
Error console shows:
"Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIDOMXMLDocument.load] ... data: no"
but this is occurring for a file that had been successfully loaded previously.
Additional info:
I am getting the following warning for pages that do load successfully:
Warning: Use of Document.load() is deprecated. To upgrade your code, use the DOM XMLHttpRequest object.
I know I will need to deal with this issue sometime in the near future, but the structure of the data means that I need to load stylesheets from a directory above the directory containing the xml data being loaded, and the security features of XMLHttpRequest won't allow this. So a move to using XMLHttpRequest means restructuring the data, which is a major overhaul.A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25 -
App world won't load after latest update
Sometime today after updating to the latest build(1.0.3.1868) as well as latest bridge build and app world will no longer load. It just goes to the colorful page and never starts up completely. Is it down? Are others experiencing this? I've shut down and started again and have also done a restart with no difference.
Hey rbeste,
Are you still having an issue with App World on the PlayBook?
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
java applets will not load,
i have run the java test page & i have the latest version installed.
have removed all old versions of java from my hard drive & restarted the computer.
i have checked that java is enabled in the plug-ins and it is with version se 6 u22, also something called java development toolkit 6.0.220.4 np runtime script plug-in library for java (tm) deploy.
if i click on java console in tolls nothing happensHi,
You might want to look in your control panel for 'Java' icon. It should give you an option to enable java plugin into your browser. Let me know if you still face the issue.
Thanks! -
My computer crashed and I had to reinitialize it.
Win 8.1
In setting it back up, I have logged into my 365 bus premium account and tried to set up the outlook on my desktop. I posted this question in the business 365 page and THEY told me to post it here as they all seem to be clueless, even the techs that called
me on the phone...
Although I have deleted my profile 3x and uninstalled and reinstalled Outlook and then deleted the profile AGAIN, these error messages persist (see attachment). I have also gone into the control panel and tried to alter the settings there, to no avail.
After the second message is cancelled, outlook closes.Hey,
Have you done a repair to the Office install. I would try an online quick repair, and try this again. You can do this by going to programs and features, selecting Office 365 ProPlus, and selecting Repair. Once you do this, open
Outlook and setup a new profile. -
Ipod Touch Won't Start after Latest Upgrade
I was just prompted to upgrade my Ipod Touch 4g to the latest version of software. It went through the download process and started to install the software. At the end of the installation I got an error message that said something to the effect that the software could not finish installing. Now my screen is stuck with the usb cable and the itunes logo and I can't reset my Ipod. I have pressed the ON/OFF button with the HOME key button for ten seconds and I can't get rid of the usb cable and Itunes logo.
Do I have any options here? My Ipod is less than 3 months old.You can use RecBoot to get it out of recovery mode or try doing a manual install, as outlined in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
ITunes Won't Load Following System Update
I did a System (might have been a Security) Update on my Mac recently and immediately following, I couldn't access iTunes anymore. It just continuously "loading". Finally it will say there is a store error and to try again later. Is anyone having the same problem? Anyone know a solution?
I think iTunes has lost itself!
So many different issues,
Hopefully it will be fixed soon -
IPhoto won't load library after upgrade (10/31/2011)
I upgraded my iPhoto yesterday through the AppStore. When I opned iPhoto, it told me it needed to upgrade my library. During upgrade a status bar showed the ongoing progress until it reached the end. At that point the left column listing my "Events," Photos," "Faces," albums, etc. showed up, but the main space where the thumbnails/photos should appear remained grey with the round ticker (or whatever it's called) indefinately spinning (for at least 6 hours). If I quit iPhoto, it would again ask me to upgrade my database everytime I launch it. I can create a new library, but cannot opn the one I have. I have seen other posts, but don't know if they apply to my situation. Any help would be greatly appreciated (I have about 18k pics, which I would hate to lose!!!)
Thanks!You have a back up, of course?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
Maybe you are looking for
-
How do I find the font for a specific character in a textItem?
I'm writing a script that builds a font list for an open document. While I could have lookup the fonts for the file as a whole, my goal is to iterate over specific layerSets to build a font list from. The issue I'm facing, is that referencing: app.fo
-
How to copy long text from production order to automatically created P.R
Hello experts, I want to add some text to the long text , in the production order and save it. There is an external process in our routing, in which when the order is saved and released, there is a P.R created automatically. My requirement :- The te
-
Automated Bullets Not Working in Word 2011 for Mac
Automated bullets are not working, whether I type * followed by a space or by a tab. I have verified Automatic Bullet Lists is selected under Tools / Autocorrect / Autoformat as You Type. Any ideas?
-
SAP B 1 8.8.1 PL5 Hardware key issue
Hi All, As I recently installed SAP B1 8.8.1 PL5 successfully, We open 'service manager' -> License Manager -> Settings -> Entered Server name Issues are : 1.No Harware key was displayed below. 2.While clicking on 'Set' button, some message was throw
-
PR05 - Infotype '0017' does not exist for YYYY/MM/DD
Hi Experts, Is there a way to make this message as "warning" only? Thanks.