Office Store not working in Office 2013 ProPlus

I have few policies set up for managing our network deployment of Office 2013 ProPlus. Pretty standard things like disabling the first time run movie, disabling the office start screen, and disabling OneDrive. I actually made most of these changes through
the registry as well.
Now, it seems as though the Office Store is disabled but I have no recollection of specifically disabling such a feature nor could I find a registry or GPO which does disable it. I even undid many of the registries I use on a test bench but still could not
get the Office Store functionality back. We've had Office 2013 rolled out on our network for almost a year, and it's taken this long for 1 person of 150 members of staff to notice that the Dictionaries feature is not working due to Office Store not working.
I feel a bit daft posting something seemingly so trivial on TechNet, but half an hour on Google didn't turn up anything relevant that I wasn't already aware of.
Many thanks in advance.

Hi,
Please check if you have disabled the option of "Don't allow any apps to start" and "Don't allow apps from the Office Store to start" in Office Trust Center.
Location: FILE->Options->Trust Center->Trusted App Catalogs
GPO settings for these options:
Block Apps for Office
Block the Office Store
Location: User Configuration->Administrative Templates->Microsoft Office 2013->Security Settings->Trust Center->Trusted Catalogs
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support

Similar Messages

  • Pivot created in office 2010, Not working in office XP.

    Hi,
    I have a issue, created a excel file in office version 2010 with pivot, but when i am trying to open it in office xp, File is opening but pivots are not working.I have also set it on compatible mode.
    Please suggest if anyone have idea.

    There might be no way to solve the pivots compatiblity issue in old Office version. We highly recommand upgrade Office XP to Office 2007 or higher version to avoid this kind of issue.
    Tony Chen
    TechNet Community Support

  • Office Web Apps 2013 - Word app not working on Sharepoint 2013 but Excel does

    Hi there!
    We had some problems with Office Web Apps 2013 not working with Lync, and the status of OWA was unhealty so we decided to install some updates for OWA.
    We have downloaded November 2013 update for OWA.
    We found out a guide for putting updates on OWA and done this steps:
    * Remove-OfficeWebAppsMachine
    * Installed the november update
    * Restarted OWA server
    * ran: New-OfficeWebAppsFarm -InternalUrl https://owasrv.domain.local -ExternalURL
    https://owasrv.domain.local -CertificateName "certname" -AllowHttp  -EditingEnabled
    * Restart-Service WACSM
    - checked in IIS in the bindings if the site useses the correct certificate
    Then we went on Sharepoint 2013 and ran some commands:
    * Remove-SPWOPIBinding –All:$true
    * New-SPWOPIBinding -ServerName owasrv.domain.local
    * Set-SPWOPIZone –zone “external-https”
    Now here are the funny things:
    * Excel word app on Sharepoint 2013 works
    * Word APP not working (screenshot)
    * Lync 2013 powerpoint still not working (screenshot)
    * status of OWA is healthy
    bostjanc

    Hi,
    The Friendly name field must be unique within the Trusted Root Certificate Authorities store.  In -CertificateName, enter the friendly name you gave your
    certificate earlier.
    Validate the configuration by navigating to the discovery URL of the Office Web Apps server.  Like
    https://xxx/hosting/discovery
    Meanwhile, the issue is related to Lync, I recommend to you to post the question on Lync Server for further discussion via the link below.
    http://social.technet.microsoft.com/Forums/en-US/home?forum=ocsclients
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction
    with us. Thank you for your understanding.
    Tracy Cai
    TechNet Community Support

  • Crystal report 8.5 export to csv and rtf format not working with office 2013

    Hi Experts,
    Crystal report version 8.5 hangs and eventually crash when i export my report to csv or rtf format on windows 7 with office 2013 installed, code is written in VB 6 although the same scenario is working with office 2010 installed.
    i debugged the code and found the application hangs at function Report.Export(False).
    below is the code snippet
           .PDFExportAllPages = True 'ePDFExportAllPages
           .PDFFirstPageNumber = ePDFFirstPageNumber
           .PDFLastPageNumber = ePDFLastPageNumber
           .RTFExportAllPages = True 'eRTFExportAllPages
           .RTFFirstPageNumber = eRTFFirstPageNumber
           .RTFLastPageNumber = eRTFLastPageNumber
           .UseReportDateFormat = eUseReportDateFormat
           .UseReportNumberFormat = eUseReportNumberFormat
           .UseReportNumberFormat = eUseReportNumberFormat
           .XMLAllowMultipleFiles = eXMLAllowMultipleFiles
           .XMLFileName = eXMLFileName
           Report.Export (False) ----Application hangs here and eventually crash
    Looking forward for your help, as it is very urgent
    Regards
    Mohit

    Hi Mohit
    CR 8.5, being about 15 years old, does not support Windows 7. I am surprised this works for you with MS Office 2010 and to be honest, I'd consider my self lucky there. The fact that is does not work with office 2013... well, like I said, lucky with Office 2010 and your luck ran out with Office 2013.
    Your option; rewrite the app in VS 2010 / 2012 / 2013 and use the CR Assemblies for VS .NET from SAP Crystal Reports, Developer Version for Visual Studio .NET. The CR Java SDK would be another option.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Exchange 2010 Out of Office Assistant not working?

    New server with a new Exchange 2010 install into an existing domain...
    When users on both the internal network and external network try to access the Out of Office Assistant they get an error message of: " Your Out of Office settings cannot be displayed, because the server is currently unavailable".
    I have done tons of research on WebServicesVirtualDirectory and AutodiscoverVirtualDirectory and set both internal and external URL's that work if you go to them in IE )internally and externally offsite).
    Here are the settings of Autodiscover and Webservices:
    [PS] C:\Windows\system32>Get-WebServicesVirtualDirectory | Format-List
    RunspaceId : 86aaf7fc-ca19-45b2-87d1-45ec432a670d
    CertificateAuthentication :
    InternalNLBBypassUrl : https://MAILSERVER.domain_name.local/ews/exchange.asmx
    GzipLevel : High
    Name : EWS (Default Web Site)
    InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
    ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
    LiveIdSpNegoAuthentication : False
    WSSecurityAuthentication : True
    LiveIdBasicAuthentication : False
    BasicAuthentication : True
    DigestAuthentication : False
    WindowsAuthentication : True
    MetabasePath : IIS://MAILSERVER.domain_name.local/W3SVC/1/ROOT/EWS
    Path : C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\exchweb\EWS
    Server : MAILSERVER
    InternalUrl : https://MAILSERVER.domain_name.local/EWS/Exchange.asmx
    ExternalUrl : https://mail.domain_name.com/owa
    AdminDisplayName :
    ExchangeVersion : 0.10 (14.0.100.0)
    DistinguishedName : CN=EWS (Default Web Site),CN=HTTP,CN=Protocols,CN=MAILSERVER,CN=Servers,CN=Exchange Adm
    inistrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=M
    icrosoft Exchange,CN=Services,CN=Configuration,DC=domain_name,DC=local
    Identity : MAILSERVER\EWS (Default Web Site)
    Guid : 4639e4b9-9cf3-4f92-8940-f7c31e07cd47
    ObjectCategory : domain_name.local/Configuration/Schema/ms-Exch-Web-Services-Virtual-Directory
    ObjectClass : {top, msExchVirtualDirectory, msExchWebServicesVirtualDirectory}
    WhenChanged : 4/1/2010 2:47:37 PM
    WhenCreated : 3/11/2010 11:02:22 AM
    WhenChangedUTC : 4/1/2010 8:47:37 PM
    WhenCreatedUTC : 3/11/2010 6:02:22 PM
    OrganizationId :
    OriginatingServer : DOMAINCONTROLLER.domain_name.local
    IsValid : True
    [PS] C:\Windows\system32>AutodiscoverVirtualDirectory | Format-List
    RunspaceId : 86aaf7fc-ca19-45b2-87d1-45ec432a670d
    Name : Autodiscover (Default Web Site)
    InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
    ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
    LiveIdSpNegoAuthentication : False
    WSSecurityAuthentication : True
    LiveIdBasicAuthentication : False
    BasicAuthentication : True
    DigestAuthentication : False
    WindowsAuthentication : True
    MetabasePath : IIS://MAILSERVER.domain_name.local/W3SVC/1/ROOT/Autodiscover
    Path : C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Autodiscover
    Server : MAILSERVER
    InternalUrl : https://MAILSERVER.domain_name.local/autodiscover/autodiscover.xml
    ExternalUrl : https://mail.domain_name.com/autodiscover/autodiscover.xml
    AdminDisplayName :
    ExchangeVersion : 0.10 (14.0.100.0)
    DistinguishedName : CN=Autodiscover (Default Web Site),CN=HTTP,CN=Protocols,CN=MAILSERVER,CN=Servers,CN=Exc
    hange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organiza
    tion,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain_name,DC=loca
    l
    Identity : MAILSERVER\Autodiscover (Default Web Site)
    Guid : 7a234ea2-20fc-412b-bbf0-3ea5f965d8da
    ObjectCategory : domain_name.local/Configuration/Schema/ms-Exch-Auto-Discover-Virtual-Directory
    ObjectClass : {top, msExchVirtualDirectory, msExchAutoDiscoverVirtualDirectory}
    WhenChanged : 4/1/2010 3:00:49 PM
    WhenCreated : 3/11/2010 11:02:07 AM
    WhenChangedUTC : 4/1/2010 9:00:49 PM
    WhenCreatedUTC : 3/11/2010 6:02:07 PM
    OrganizationId :
    OriginatingServer : DOMAINCONTROLLER.domain_name.local
    IsValid : True
    Test-OutlookWebServices comes up with errors. The Test E-mail AutoConfiguration within Outlook still appears to be looking for Autodiscover at different URLs...
    OOF within Outlook Web App functions.
    Any suggestions would be helpful!

    From your previous post, I understand that OOF doesn't work for both internal and external clients. Error message "Your Out of Office settings cannot be displayed, because the server is currently unavailable" was received from Outlook client side. Please correct me if I have any misunderstanding.
    Before we go any further, I would appreciate your help in clarifying the following questions:
    1. When did this issue begin to occur, since the installation of Exchange 2010?
    2. Can we access and configure OOF from OWA?
    As internal & external clients are using different methods/URL to access Autodiscover and EWS, which provided OOF service, I recommend we focus on the internal users first.
    To troubleshoot this issue, please install the hotfix mentioned in the following KB on the Exchange Client Access Server first:
    Outlook 2007 crashes or you cannot access OOF settings after you install a package that contains the .NET Framework 3.5 with SP1 and the .NET Framework 2.0 with SP2 on an Exchange 2007 Client Access server or on an Exchange 2010 Client Access server
    http://support.microsoft.com/kb/958934 
    After that, check if the issue remains. If there is still problem, please help me collect:
    1. Test E-mail AutoConfiguration from Outlook client
    1. Launch Outlook 2007 using a correct configured profile.
    2. Hold down the CTRL key on your keyboard and click the Outlook icon in the notification area of the Windows taskbar, also known as the notification area.
    3. In the menu that appears, click Test E-mail AutoConfiguration.
    4. Enter your E-mail Address and Password (if not logged into the domain) in the respective edit boxes.
    5. Choose the desired auto configuration methods with Use Autodiscover, clear other selection.
    6. Click Test.
    7. Please send me the screenshot of the result tab and log tab.
    2. Result files after running the following command on the Exchange 2007 server
    Get-ExchangeCertificate | FL >C:\cert.txt
    Get-WebServicesVirtualDirectory –Server ServerName | FL >C:\EWS.txt
    Get-AutodiscoverVirtualDirectory –Server ServerName | FL >C:\Audis.txt
    Get-ClientAccessServer  | FL >C:\cas.txt
    Email them to me at [email protected]
    With the title as
    "Exchange 2010 Out of Office Assistant not working?"
    Regards
    Fazal M khan

  • I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    Back to Snow Leopard from Lion install method
    Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
    Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
    If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
    Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
    Here we go!
    Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
    Look at the Utilities Menu for Disk Utility.
    On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
    This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
    When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
    When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
    Update OS X to 10.6.8 using the Combo Update for best results.
    http://support.apple.com/kb/DL1399
    (Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
    Final step optional but highly receommended.
    A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version..  (in addition to TimeMachine drive for more immediate backups.)
    It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

  • I need a reliable office suite.   Open Office is not working well for me.  Any suggestions?

    I need a good reliable office suite.  Open Office is not working well for me.  Any suggestions?

    If you mean Open Office is not always able to correctly open documents received from clients created with MS Office, then the only real solution is to purchase Office 2011 for Mac. As good as some of the free alternatives are, they can't duplicate every feature of MS Office.

  • Installed Yosemite and Microsoft Office does not work. How do Apple do it? Help!!

    Installed Yosemite and now Microsoft Office does not work. Help!!

    What version of Office is it, and what version of OS X were you running prior to your upgrade? You need to be on Office 2008 or later, and Office 2011 is preferable.

  • 64 bit Windows 7 Itunes 10.5 store not working

    64 bit Windows 7 Itunes 10.5 store not working:  Reset netsh winsock, turned off fierwalls, etc.  Still Itunes store comes up as blank white.  I need help.  I also suggest Apple made it possible to download from a website instead constantly glitchy software.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Dell Inc. Inspiron 620
    iTunes 10.5.3.3
    QuickTime 7.7.1
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 002EAD84036361B8
    Current user is not an administrator.
    The current local date and time is xxx
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.5.3.3 (x64) is currently running.
    iTunesHelper 10.5.3.3 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {81DAE0D9-A8E7-418D-A08C-386B4561B2B7}
    Description:    Realtek PCIe GBE Family Controller
    IP Address:    xxx
    Subnet Mask:    xxx
    Default Gateway:    xxx
    DHCP Enabled:    Yes
    DHCP Server:    xxxx
    Lease Obtained:    Sun Feb 26 22:49:54 2012
    Lease Expires:    Wed Feb 29 17:19:08 2012
    DNS Servers:    75.75.76.76
            75.75.75.75
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    SSL 3.0 Support:    Enabled
    TLS 1.0 Support:    Disabled
    Firewall Information
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.

    I've removed PCTools from the reg.
    Okay ... PC Tools has released an update for some LSP-related iTunes conflicts, so it might also be worth investigating that:
    iTunes is not working correctly with PC Tools protection software installed

  • I have done everything I can in all discussions. Itunes store not working.  I have Windows 7 , 64 bit.

    I have read all the replies to the "Itunes store not working".  I have done everything I can to use any of the solutions.  This is my 5th day.  I give up.  Need some help.  As I can see there seems to be a lot of those problems.

    I spent some time on the phone this morning with Apple. Here's a link they sent me: http://support.apple.com/kb/HT1923
    It's more than just uninstalling Itunes; there are 5 other apps that have to be uninstalled and in specific order. This particular Knowledge Base article applies to Windows Vista or Windows 7. For other Windows versions you'd have to look up the article for Windows XP.
    Hope this helps.

  • App Store not working what to do?

    App Store not working what to do?

    Reboot ur ipad....press both home and power buttons same time until apple logo com up and then release it,data is not effected .

  • I can't entered in iTunes Store.not working and i dont know why

    I can't entered in iTunes Store.not working and i dont know why

    "Error 11222"
    Apple is investigating reports of this issue. Proxies, certificate issues, or your Internet service provider may be the cause of this issue.
    From:
    http://support.apple.com/kb/TS3297

  • Mac App Store not working? (Glitching and flashing!)

    Mac App Store not working? (Glitching and flashing!)
    I was at my friends house, everything was working fine. I went to my girlfriends house, everything was still working fine. Then once I got home, I got back out my 2010 MacBook Pro 15" to use and some pages on the internet looked a little odd. They were all in HTML format and wouldn't go back (Pages such as Skype and Apple's main page). I thought they were just down or being fixed up, but then I went to update my Mac under the App Store. I clicked the App store and a message popped up saying "App Store cannot verify a secure connection with the App Store." The options were "Cancel" or "Continue". I clicked "Continue" so I could update my Mac, but weird enough, the App Store started flickering (strobing; blinking) as seen in this video by someone with the same problem: http://www.youtube.com/watch?v=De8aQZccRvA
    I do not know what to do or why this is happening, so help would be VERY nice.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Office Web Apps not working externally SharePoint 2013

    In the production farm we have connected office web apps server which is FQDN server name ( xxx.xxx.corp.local) , we can open the sites internally without any issues, but when we open from externally office web apps asking for authentication and not working
    properly.
    Please help me how to make it work  in external. 
    Thanks, Ram Ch

    You will need a public facing URL or IP address. Check below
    You need to configure your OWA for internet
    New-OfficeWebAppsFarm –InternalUrl "md1xxx95.jdaxx.corp.local" -ExternalUrl "http://198.xxx.xxx.xxx" -EditingEnabled
    Set-SPWOPIZone –zone
    “external-http”
    Detailed steps in
    http://social.technet.microsoft.com/wiki/contents/articles/19039.sharepoint-2013-how-to-enable-office-web-apps-to-work-in-both-internal-and-external-environments.aspx
    Set-SPWOPIZone –zone “external-http”
    Set-SPWOPIZone –zone “external-http”
    If this helped you resolve your issue, please mark it Answered

  • Acrobat XI combine to PDF feature is not working with Office 2013 is there a compatibility issue?

    Tested with Office 2010 and it works fine
    Seems to only be the combine to PDF feature that doesn't work, done updates, tried combining a variety of documents still no joy

    There isn't any compatibility issue with Office 2013 and Combine should work with office 2013 same as it with 2010.
    Can you please tell us some more details so that we can investigate the problem which you are facing:
    1) Please update the exact Acrobat version you are using. This you can find out via "Help -> About Adobe Acrobat XI Pro.." Version should be something like 11.0.x. If it is not 11.0.7, then please update it to 11.0.7 and try again.
    2) Is this problem you faced recently (after some update - Acrobat or OS update) or it never used to work earlier for you?
    3) You mentioned that when combining, it convert first document only. Can you please let us know how many documents you are combining and what are those formats?
    4) Also please update about you environment as well. Is you Operating System and MS Office 32bit or 64bit?
    Thanks,
    Vishal

Maybe you are looking for

  • Running a single program on several clients

    Hi, I'm making a program which is going to be put on a server. The users will have this server mapped as a network drive (say, P:). For the user to run the program, she/he will run a bat-file (which sets 'PATH' to include JRE (which is also on the se

  • HT201406 my ipad touch screen is not working please give solution for it.

    my ipad touch screen is not working please give solution for it. i have connected ipad to itunes and done it restore seetings then also my touch is not working but when i connected ipad to i tunes inside functions are working properly but touch scree

  • MS Office Document Cache keeps failing repeatedly...

    The thread under title "The Microsoft Office cache encountered a problem (with Office 2013 ProPlus Preview/Beta)" described exactly my problem, but discussion on that thread has been locked without any solution to the problem. I'd like to add one sym

  • IC Webclient:CRM2007

    Hi All, I have a requirement to enhance / change the Sales Order View in ICWC CRM 2007, Can Some one brief me about the steps. Please start with the view / compo identification onwards Note: I am very much familiar with CRM 5.0 WebClient, if you can

  • JDeveloper and myfaces

    hi Im trying to use MyFaces components in my JSF apllication.Im using JDeveloper. i got a tutorial how to use MyFace components in JDev.i followed it and did it.but i could not properly understand wht i have to do. i didnt make any changes in any xml