Office Updates get's allways downloaded for all available languages
Hello,
i have different ADR für download an deploy Upates in SCCM 2012 R2. For all ADR i have the language english and german sellected. The ADR for Windows is working fine. The ADR for Office 2013 is allways downloading all available languages for the selected
Updates. I have tried a single download for an Office Update with the same result.
In the "Software Update Point Component" settings i also have seleceted only english and german.
Any Idea?
Thanks in advance
Guido
Hi,
The updates above are for multiple languages.
These are Language Packs when you choose "Windows 8.1 Language Packs" in the Products tab. They can be installed on all the computers with Windows 8.1.
This behavior is nomal.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
when downloading microsoft office update get message to close microsoft database daemon and sync services agent. Shouldn't these be closed automatically? I try to close them, but the message still says they need to be closed. Help!
Are you using Outlook 2011 or Outlook 2015? I don't seem to have any relevant sync settings under Preferences -> Other in Outlook 2015.
-
Hi,
A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc.
- AvinashThe purchases are probably hidden:
http://support.apple.com/kb/ht4919 -
I have Photoshop Elements 11 (full version with Serial Number) for windows; now I don't have a windows PC anymore. Can change my windows serial number into a MAC/OS serial number? What do I have to do to get Elements 11(download) for OS an a serial number for Elements 11 ?
You can download PSE 11 via the following linked web page:
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html -
Hi Other Users, can someone please advise me where i can get a Leopard download for my Power Pc G5?
eBay is another source for Mac OS X Leopard 10.5; however be sure to ONLY purchase the retail disk shown below and not a grey computer specific disc:
-
Powershell script to get Audit log settings for all site collections.
Hi all,
I am facing issue to get audit log details for all site collection across the farm with the below script. Could someone help me change the script.
Function AuditValue($url)
$site=Get-SPSite $url
auditMask = $site.audit.auditflag
return auditMask
Get-SPSite -Limit All | Get-SPWeb -Limit All |
Select Title,Url,AuditValue(Url)| export-csv "D:\scripts\Test\AuditDetails.csv" -notypeinformagettion
Thanks BasvaWhat errors are you getting? That is if any.
Scrap that I see a few.
Not had time to fix it fully. As I am now done at work, but this will help you on your way. It gets back only the audit flag value at the moment.
Function AuditValue
$site = Get-SPWeb "http://server" -limit ALL
foreach($i in $site)
$auditMask = $site.audit
$list = $auditMask
$list | Select-object auditflags
AuditValue | out-file "C:\temp\AuditDetails.csv"
EDIT::
Function AuditValue
$site = Get-SPWeb "http://SERVER" -limit ALL
foreach($i in $site)
$auditMask = $site.audit
$list = $auditMask
$list | Select-object @{Name="URL"; Expression ={$site.url}}, auditflags
AuditValue | out-file "C:\temp\AuditDetails.csv"
The above will also put URL
If this is helpful please mark it so. Also if this solved your problem mark as answer. -
episodes do not auto-download even though I receive email confirmation they are ready. 'Check For Available Downloads' says all available are already downloaded. Signed in properly on an authorized machine. Can anyone explain this? Give directions to fix?
Thank you for the reply. These are not, however, past purchases; these are fresh episodes of purchased seasons. For instance, I receive an email that a new episode of Elementary is ready for me to download. When I check for available downloads, though, I am told there are none. So these are not previous purchases that I am trying to re-view or download again. These are fresh items for which I have paid but which I appear unable to access unless, perhaps, I were to re-purchase them. Grrrrrr.
-
RoboHelp HTML Version 10,
Why has my CHM search stopped working? I get "no results found" for all searches...........robLikely you need to re-register some DLLs and recompile.
Click the link below and follow the information you find there.
Click here
Cheers... Rick -
REST url to get titles and description for all the lists in HOST WEB.
What should be the REST url to get specific prperties for all the list in host web for SharePoint Hosted Apps.
Hi,
We can use the REST URI below:
http://myAppweburl/_api/web/lists?$select=Title,Description
More information:
How to: Complete basic operations using SharePoint 2013 REST endpoints
http://msdn.microsoft.com/en-us/library/office/jj164022(v=office.15).aspx
Best Regards
Dennis Guo
TechNet Community Support -
Get MS Exchange mail for all group members
Is it impossible to get all email from all mailboxes in MS Exchange? I have full rights in Azure console for Office365 exchange online.
http: //i.stack.imgur.com/DF5n5.png
But when I'm trying make an request to
https://outlook.office365.com/EWS/OData/Users('[email protected]')/Inbox/Messages
getting an error "The specified object was not found in the store."
But for logged in admin
https://outlook.office365.com/EWS/OData/Me/Inbox/Messagesor
https://outlook.office365.com/EWS/OData/Users('[email protected]')/Inbox/Messages
works well.
What should I do, to get access for read mail for all my users in office 365?Hi,
Best way is to use a service \admin user to read all emails of all (or a set of) mailboxes, but first you would have to setup permission to all mailboxes using :
1. Exchange Application Impersonation
OR
2. Delegate Access (where u grant Full Access permission for a single service account to all mailboxes)
Please have a look into:
http://kb.infobridge.com/KnowledgebaseArticle10370.aspx
http://www.codetwo.com/kb/how-to-set-impersonation-rights-manually/
https://support.software.dell.com/kb/SOL81894
This way you would have to keep only one credential to access all mailboxes using EWS.
There is a little difference in setting up ExchangeService (EWS) object for both methods. Using delegate permission you can setup more granular permission (ie. to one or many or all mailbox folders), while using impersonation, there is no choice, the impersonated
user has all folders access to target mailbox.
Also, impersonation is setup only once, while, in the case of Delegated permission, for any new mailbox user, you would have to run
Add-MailboxPermission “[email protected]” –User “AdminUSer” –AccessRights FullAccess
to grant the permission.
Hope this helps.
Regards,
Laeeq Qazi|Team Lead(Exchange + Sharepoint + BES + DynamicsCRM)
www.HostingController.com -
Unable to Get the Data Using For All Entries
Hi everybody, i am using for all entries in a program. but when i am writing a code using for all entries i am getting an error as
Where condition does not refers to the FOR ALL ENTRIES tables...
SELECT KUNNR
NAME1
ORT01
LAND1
FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
ERDAT
KUNNR
FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = IT_KNA1-KUNNR.
ENDIF.
can anybody help out in this
regards
hyder aliThe correct one may be like this:
SELECT KUNNR
NAME1
ORT01
LAND1
FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
ERDAT
KUNNR
FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = ITAB1-KUNNR. "modified here
ENDIF.
Edited by: XuJian84 on Mar 9, 2010 4:25 AM -
How to get One Selection Screen for all queries?
Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
ShreeemHi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri -
Getting UWL task count for all users in a role.
Hi.
I recently posted a question regarding a very similar issue, but I haven't got any response yet. I think my question might have been somewhat poorly phrased, so I will try to do better at explaining what we need.
We have a number of processes, most of which need to be dynamically assigned to a user when created. The way we want to assign those tasks is by executing a WebService which would receive a role name and get all the users for that role. Then, using the UWL API, it would check how many tasks each of the users have in their UWL, and return the UserID for whoever has the least tasks. I haven't been able to get this to work. I keep getting Logged in users context or session doesn't exist Exception.
Please, any help on this will be greatly appreciated.
Currently working with SAP NWDS 7.1 SP05 PAT0005Hi,
Thank you for your response, however, that's not what I need.
For you and anyone esle who might find this extra info useful...
I know how to get a user's role(s), and how to get the users in a role.
I also know how to assign a task to a specific user dynamically.
Using the UWL API, I know how to get the tasks (or items) in a user's UWL from a WD application, I need to do that from a WebService and using pretty much the same code, with the necessary adjustments, I can't get it to work.
Furthermore, I'm able to get the UWL tasks for ONE user, that user being the one I log into the application with. For example, if I write code to get the tasks for user testUser1, I need to log in with testUser1 to get it to work, if I log in with any different user or make it a non-authenticated application, it won't work.
Again, help on this is much needed and will be appreciated. -
I have app updates and the purchase of a new app downloading for at least 3 days. I uploaded IOS 6 the day prior to trying to update these apps. Help, please.
Thank you very much for taking the time to reply -- I now can stop worrying about trying to learn how to delete the previously downloaded updates from the update screen.
-
What is the best practice for localization?One .rpt for all/each language?
Hi All,
I have a question :
What is the best practice for localization?One .rpt for all language or one for each language? I
Thanks for your response,
jzWell, speaking of best practices, see the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]
Step 2 Asking Your Question; Provide Enough Information
Next, make sure you search these forums before posting. Your question may just be already answered, thus giving you quicker resolution. For example, these threads come up just searching for "localization":
Multiple language support
Crystal Reports localization issue
English resource files
Next, (assuming you are working with CR 2008), see the developer help files:
http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm
http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_apiRef_12_en.chm
https://www.sdn.sap.com/irj/boc/sdklibrary
In the Crystal Reports 2008 .NET SDK developer Help file, search for "Localization".
Ludek
Maybe you are looking for
-
Re: How can I tell if my phone line is connected t...
Hi, I am also struggling to pin down whether we are on an EOL. The village is being upgraded via Connecting Cheshire, either end is going live imminently as are the surrounding villages in the area on our exchange, yet a strip right through the middl
-
Change a string into a different format
How do I convert this CN=zeeeComputerName,OU=cars,OU=sales,OU=employees,OU=Desktop,DC=carplace,DC=com to this carplace.com/desktop/employees/sales/cars/zeeeComputerName
-
JQuery replace text is making all text from webapp the same
Hello, I'm hoping someone could give me a hand! On this home page: www.largemouthfrog.net I am running a WebApp called 'Testimonials' which produces a string of words/phrases based on checkbox selected items. They come into the page as: <li>...<div
-
Code to split biztalk xml inner node message in to many
Hi, I want to split inner node message into many. Actually my xml message look like bellow <MSg> <Header> <InterfaceName></InterfaceName> </Header> <Detail> <detail1>1</detail1> <detail2>2</detail2> <detail3>3</detail3> <detail4>4</detail4> </Detail>
-
Problems with Advanced Queueing...
Hi, Has anyone used AQ through OCI? We are having problems with OCISubscriptionRegister() the error reported back is 'two task conversions - overflow integer'. The code we are running is straight out of the published demos... Please HELP!! Thanks, Da