Office Web Apps 2013 installation issue in HTTPS
Hi,
I'm trying to install Office Web Apps Server in HTTPS mode but keep getting an error. When I run the command New-SPWOPIBinding -ServerName owaserver, it says "WARNING: The server did not repspond. Trying again (attempt 1of 5)." When I go into Event
Viewer, I see this error for each attempt:
An operation failed because the following certificate has validation errors:
Subject Name: CN=<url>, OU=Domain Control Validated - RapidSSL(R), OU=See
www.rapidssl.com/resources/cps (c)12, OU=<OU>, SERIALNUMBER=<serial number>
Issuer Name: CN=RapidSSL CA, O="GeoTrust, Inc.", C=US
Thumbprint: <thumbprint>
Errors:
SSL policy errors have been encountered. Error code '0x2'..
I've installed the Root CA from the provider, registered the .cer files in CA -> Security -> Manage Trusts, and via PowerShell. I've reset IIS multiple times and rebooted the OWA server and the WFE. I'm not sure if it's an issue with the cert or a
SharePoint issue.
Thanks
Did you register your certificate with the New-OfficeWebAppsFarm command (-CertificateName) when you set up your Office Web Apps farm?
http://technet.microsoft.com/en-us/library/jj219436.aspx
- Xenox G.
Similar Messages
-
Hi,
Uploaded a word doucment in sharepoint 2013 and When we open it in WebApp2013 then following compatibilty warning is reflecting.
"Compatibility Mode Functionality is currently limited"
how to supress this warning message ?
Thanks.
rajHi,
As I understand, you would like to insert document preview in Iframe, here is an article which describe about Document preview function for your reference:
http://community.obilogic.co.uk/blogs/teamblog/archive/2014/01/23/sharepoint-2013-custom-callout-with-file-preview.aspx
Regards,
Rebecca Tu
TechNet Community Support -
SharePoint 2013 SP1 and Office Web Apps SP1 not working using HTTP
Hi I had problems installing and configuring Office Web Apps 2013 SP1 integrated with SP 2013 SP1.
Do you know if there is any issue?
This is the error in the owa side:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 4/24/2014 10:04:54 PM
Event time (UTC): 4/24/2014 9:04:54 PM
Event ID: 86c0893b9e89427babde2c4e931e0a28
Event sequence: 17
Event occurrence: 2
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/2/ROOT/wv-1-130428459380785645
Trust level: Full
Application Virtual Path: /wv
Application Path: C:\Program Files\Microsoft Office Web Apps\WebWordViewer\
Machine name: SPS-OWAS01
Process information:
Process ID: 13696
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: HttpUnhandledException
Exception message: Exception of type 'System.Web.HttpUnhandledException' was thrown.
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.HttpContext.InvokeCancellableCallback(WaitCallback callback, Object state)
at System.Web.UI.Page.LegacyPageAsyncInfo.CallHandlersPossiblyUnderLock(Boolean onPageThread)
at System.Web.UI.Page.LegacyPageAsyncInfo.CallHandlers(Boolean onPageThread)
Unable to determine zone from request
at Microsoft.Office.OpenWebApplication.WopiOM.DecomposeWopiUrl(List`1 actionList, HttpRequest request, WopiAction currentAction, String extension, Boolean forceSsl)
at Microsoft.Office.Web.Apps.Environment.WacServer.WSUrlAdapter.ChangeActionInWacUrl(HttpRequest request, WacUrlApplication application, WacUrlAction currentAction, WacUrlAction targetAction)
at Microsoft.Office.Web.WordViewer.Controls.Application.RegisterApplicationInit()
at Microsoft.Office.Web.Common.AApplication.OnPreRender(EventArgs e)
at Microsoft.Office.Web.WordViewer.Controls.Application.OnPreRender(EventArgs e)
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.AddedControl(Control control, Int32 index)
at System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.Page.Render(HtmlTextWriter writer)
at System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
Request URL:
http://sps-owas01/wv/wordviewerframe.aspx?ui=en-US&rs=en-US&WOPISrc=http://sharepoint.internal/_vti_bin/wopi.ashx/files/8b568ecdf89c44d8afd4132bc0b82b32&sc=http://sharepoint.internal/SitePages/Home.aspx&wdEnableRoaming=1
Request path: /wv/wordviewerframe.aspx
User host address: 10.10.199.27
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 7
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.HttpContext.InvokeCancellableCallback(WaitCallback callback, Object state)
at System.Web.UI.Page.LegacyPageAsyncInfo.CallHandlersPossiblyUnderLock(Boolean onPageThread)
at System.Web.UI.Page.LegacyPageAsyncInfo.CallHandlers(Boolean onPageThread)
Custom event details:
José Quinto Zamora SharePoint and Search Specialist MCITP and MCPD in SharePoint 2010
http://joSharePoint.comIt show me also this message:
<meta content="width=device-width" name="viewport" /><style></style>
Server Error in '/wv' Application.
Unable to determine zone from request
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Office.OpenWebApplication.DiscoveryEntryNotFoundException: Unable to determine zone from request
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[DiscoveryEntryNotFoundException: Unable to determine zone from request]
Microsoft.Office.OpenWebApplication.WopiOM.DecomposeWopiUrl(List`1 actionList, HttpRequest request, WopiAction currentAction, String extension, Boolean forceSsl) +598
Microsoft.Office.Web.Apps.Environment.WacServer.WSUrlAdapter.ChangeActionInWacUrl(HttpRequest request, WacUrlApplication application, WacUrlAction currentAction, WacUrlAction targetAction) +161
Microsoft.Office.Web.WordViewer.Controls.Application.RegisterApplicationInit() +1766
Microsoft.Office.Web.Common.AApplication.OnPreRender(EventArgs e) +1531
Microsoft.Office.Web.WordViewer.Controls.Application.OnPreRender(EventArgs e) +17
System.Web.UI.Control.PreRenderRecursiveInternal() +113
System.Web.UI.Control.AddedControl(Control control, Int32 index) +12375740
System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +150
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +246
System.Web.UI.Page.Render(HtmlTextWriter writer) +40
System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +150
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5363
José Quinto Zamora SharePoint and Search Specialist MCITP and MCPD in SharePoint 2010
http://joSharePoint.com -
Office Web Apps 2013 not loading Power Point
I installed Office Web Apps (2013) patched on a 2012 R2 server and I am having issues loading a power point onto the stage in a conference. It says "Loading..." for a few minutes and then eventually says "Either you've lost network connectivity
or our server is too busy to handle your request. Please check your network connection and try again later." Se the error below
Gerald CsakanyFor this issue, verify the
Office web Apps configuration and check below link {it's same issue}
http://blogs.technet.com/b/dodeitte/archive/2013/11/10/issue-with-office-web-apps-server-2013-published-externally-using-tmg-2010.aspx
Also refer below link to help you in troubleshooting
http://digitalbamboo.wordpress.com/2013/09/07/how-to-resolve-the-lync-2013-power-point-conference-sharing-error-with-office-web-app-server-wac-some-presenting-features-are-unavailable-due-to-server-connectivity-issues/comment-page-1/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Office Web Apps 2013 - Word app not working on Sharepoint 2013 but Excel does
Hi there!
We had some problems with Office Web Apps 2013 not working with Lync, and the status of OWA was unhealty so we decided to install some updates for OWA.
We have downloaded November 2013 update for OWA.
We found out a guide for putting updates on OWA and done this steps:
* Remove-OfficeWebAppsMachine
* Installed the november update
* Restarted OWA server
* ran: New-OfficeWebAppsFarm -InternalUrl https://owasrv.domain.local -ExternalURL
https://owasrv.domain.local -CertificateName "certname" -AllowHttp -EditingEnabled
* Restart-Service WACSM
- checked in IIS in the bindings if the site useses the correct certificate
Then we went on Sharepoint 2013 and ran some commands:
* Remove-SPWOPIBinding –All:$true
* New-SPWOPIBinding -ServerName owasrv.domain.local
* Set-SPWOPIZone –zone “external-https”
Now here are the funny things:
* Excel word app on Sharepoint 2013 works
* Word APP not working (screenshot)
* Lync 2013 powerpoint still not working (screenshot)
* status of OWA is healthy
bostjancHi,
The Friendly name field must be unique within the Trusted Root Certificate Authorities store. In -CertificateName, enter the friendly name you gave your
certificate earlier.
Validate the configuration by navigating to the discovery URL of the Office Web Apps server. Like
https://xxx/hosting/discovery
Meanwhile, the issue is related to Lync, I recommend to you to post the question on Lync Server for further discussion via the link below.
http://social.technet.microsoft.com/Forums/en-US/home?forum=ocsclients
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction
with us. Thank you for your understanding.
Tracy Cai
TechNet Community Support -
Office Web Apps 2013 Error 500
Below I configured Office Web Apps 2013, on 2 servers,
SharePoint 2013 SP1 Enterprise Edition August 2014 CU on Microsoft Windows Server 2013 R1
SP2013ServerWFE-AppServer
Office Web Apps 2013 August 2014 CU on Microsoft Windows Server 2013 R1
OFFICEWEBAPP2013SERVER
After my install, I can see that the preview displayes for the site I am on I am NOT logged on as the System Account or Site Collection Admin, just a user.
I then try to display the file below it and this is where I get the error 500
This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.
The website cannot display the page
These are the steps that I have just taken to try to enable this process.
I went to SP2013ServerWFE-AppServer – SharePoint 2013 Server
SharePoint 2013 Management Shell as Admin
Remove-SPWOPIBinding –All:$true
Went to OFFICEWEBAPP2013SERVER – Office Web Apps 2013 server.
PowerShell, as Admin.
New-OfficeWebAppsFarm –Verbose –InternalUrl "http://SP2013ServerWFE-AppServer" -ExternalUrl "http://SP2013ServerWFE-AppServer" -AllowHTTP –EditingEnabled
–ClipartEnabled -AllowCEIP
On the OFFICEWEBAPP2013SERVER server, open up IE
NETBIOS
http://OFFICEWEBAPP2013SERVER/hosting/discovery
FQDN
http://OFFICEWEBAPP2013SERVER.COMPANY.DOMAIN.local/hosting/discovery
Both worked!
Go to SP2013ServerWFE-AppServer – SharePoint 2013 Server
New-SPWOPIBinding -ServerName OFFICEWEBAPP2013SERVER –AllowHTTP
Worked, ran:
Get-SPWOPIZone
Set already but if needed to, could have changed, kept it as was below.
Set-SPWOPIZone -zone "Internal-http"
Now I get the error. Am I missing something?Get-OfficeWebAppsMachine
MasterMachineName MachineName Roles
HealthStatus
2013OWAOFFWA01 2013OWAOFFWA01 {All}
Unhealthy
It shows unhealthy, thanks to your having me check.
I just went and did Remove-OfficeWebAppsMachine and
Remove-SPWOPIBinding –All:$true and then tried what I have in my original post. Not sure why it is saying unhealthy!
Excel Calculation Services is running, I know that that will cause an issue with Excel Services and Excel Web Apps. Testing with Word Documents, and or putting in SharePoint to get to the main page, to see an image rendition in search.
I went to open a word document as search gave me an error message, so I thought I'd try, but I didn't see it in office web apps ULS but on SharePoint 2013
10/20/2014 14:59:37.41 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://sharepoint2013:80/site/subsite/_layouts/15/WopiFrame2.aspx?sourcedoc=/site/subsite/Shared%20Documents/ADP%20Portal%20Registration%20Instructions%20Contractor%20Rev%20061212.docx&action=default) aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.42 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|DOMAIN\mcarter, ClaimsCount=70 aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.42 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.44 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Authentication Authorization aib35 Medium SPShareByLinkHandler.Initialize : Not a ShareByLink request - missing access token aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.46 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Claims Authentication amcbl Medium Trusted provider is missing. Provider: '00000003-0000-0ff1-ce00-000000000000' aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.46 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'net.pipe://localhost/SecurityTokenServiceApplication/appsts.svc' Channel: 'Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract'
Action: 'http://schemas.microsoft.com/sharepoint/2011/05/securitytokenservice/IApplicationSecurityTokenServiceContract/Issue' MessageId: 'urn:uuid:5244ce59-b4fd-4d2b-83fd-c07c58a79061' aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.50 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Application Authentication aiv3c Exception System.ServiceModel.ServiceActivationException: The requested service, 'net.pipe://localhost/SecurityTokenServiceApplication/appsts.svc'
could not be activated. See the server's diagnostic trace logs for more information. Server stack trace: at System.ServiceModel.Channels.ConnectionUpgradeHelper.DecodeFramingFault(ClientFramingDecoder decoder,
IConnection connection, Uri via, String contentType, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper&
timeoutHelper) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection connection, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan
timeout) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan
timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan
timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract.Issue(RequestApplicationSecurityToken request) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.<>c__DisplayClass2.<RequestSelfIssuedToken>b__0()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.RequestSelfIssuedToken(RequestApplicationSecurityToken rst)
StackTrace: at onetnative.dll: (sig=8299e000-0f80-4b71-8567-479075c2110d|2|onetnative.pdb, offset=28B42) at onetnative.dll: (offset=152A9) aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.50 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Unified Logging Service c91s Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSException14, 269cd32d "sharepoint foundation",
0f0011db "15.0.4571.0", c180aef3 "mscorlib", 0400766f "4.0.30319.0", 528fdae1 "fri nov 22 17:29:53 2013", 00005387 "00005387", 00000051 "00000051", b742a024 "serviceactivationexception",
00215742 "aiv3c" aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.50 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Unified Logging Service b6ig Medium Data collection is not enabled for tag 'aiv3c' in the configuration or configuration file not available. Not reporting
to Watson aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.52 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Application Authentication agmxo Exception System.ServiceModel.ServiceActivationException: The requested service, 'net.pipe://localhost/SecurityTokenServiceApplication/appsts.svc'
could not be activated. See the server's diagnostic trace logs for more information. Server stack trace: at System.ServiceModel.Channels.ConnectionUpgradeHelper.DecodeFramingFault(ClientFramingDecoder decoder,
IConnection connection, Uri via, String contentType, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper&
timeoutHelper) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection connection, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan
timeout) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan
timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan
timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract.Issue(RequestApplicationSecurityToken request) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.<>c__DisplayClass2.<RequestSelfIssuedToken>b__0()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.RequestSelfIssuedToken(RequestApplicationSecurityToken rst)
at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.RequestRawLoopbackToken(OAuth2EndpointIdentity endpointIdentity, JsonWebSecurityToken onBehalfOf, String applicationContext) at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.IssueLoopbackTokenString(Uri
endpointAddress, SPIdentityContext identityContext, String applicationContext, DateTime& validTo) StackTrace: at onetnative.dll: (sig=8299e000-0f80-4b71-8567-479075c2110d|2|onetnative.pdb, offset=28B42) at onetnative.dll: (offset=152A9) aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.52 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Unified Logging Service c91s Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSException14, 269cd32d "sharepoint foundation",
0f0011db "15.0.4571.0", c180aef3 "mscorlib", 0400766f "4.0.30319.0", 528fdae1 "fri nov 22 17:29:53 2013", 00005387 "00005387", 00000051 "00000051", b742a024 "serviceactivationexception",
0018c5ce "agmxo" aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.52 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Unified Logging Service b6ig Medium Data collection is not enabled for tag 'agmxo' in the configuration or configuration file not available. Not reporting
to Watson aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.52 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation WOPI ajc39 Unexpected WOPIFrame - Unhandled exception: System.ServiceModel.ServiceActivationException: The requested service, 'net.pipe://localhost/SecurityTokenServiceApplication/appsts.svc'
could not be activated. See the server's diagnostic trace logs for more information. Server stack trace: at System.ServiceModel.Channels.ConnectionUpgradeHelper.DecodeFramingFault(ClientFramingDecoder decoder,
IConnection connection, Uri via, String contentType, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper&
timeoutHelper) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection connection, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan
timeout) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan
timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan
timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract.Issue(RequestApplicationSecurityToken request) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.<>c__DisplayClass2.<RequestSelfIssuedToken>b__0()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.RequestSelfIssuedToken(RequestApplicationSecurityToken rst)
at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.RequestRawLoopbackToken(OAuth2EndpointIdentity endpointIdentity, JsonWebSecurityToken onBehalfOf, String applicationContext) at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.IssueLoopbackTokenString(Uri
endpointAddress, SPIdentityContext identityContext, String applicationContext, DateTime& validTo) at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.IssueLoopbackTokenString(Uri endpointAddress, SPUser user,
String applicationContext, DateTime& validTo) at Microsoft.SharePoint.Utilities.SPWOPIHost.GetAccessToken(SPWeb web, Guid uniqueId, String proofKeyId, SPUrlZone zone, SPBasePermissions perms, Boolean hasEditLicense, Int64& ttl)
at Microsoft.SharePoint.Utilities.SPWOPIHost.GetAccessToken(SPFile file, String proofKeyId, SPUrlZone zone, Int64& ttl) at Microsoft.SharePoint.Utilities.SPWOPIHost.GetWOPITargetInternal(HttpContext httpContext, SPWeb web, Object&
spPrimeObject, SPWOPIAction& requestedAction, SPRegionalSettings spSettings, String& wopiAppUrl, String& wopiFavIconUrl, String& wopiAccessToken, Int64& wopiAccessTokenTtl, String& errorMessageToDisplay, String& redirectUrl)
at Microsoft.SharePoint.ApplicationPages.WOPIFrameHelper.OnLoadHelper(WOPIFrame frame) at Microsoft.SharePoint.ApplicationPages.WOPIFrameHelper.OnLoad(WOPIFrame frame) aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.52 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation General aat87 Monitorable An error has occurred on the server. aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.52 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,8 agb9s,16 aib35,11 amcbl,0 e5mc,62 ajc39,1 aat87 aa11c49c-5974-a070-b2c8-1829a3b17e45
10/20/2014 14:59:37.52 w3wp.exe (0x0CF0) 0x15D0 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://sharepoint2013:80/site/subsite/_layouts/15/WopiFrame2.aspx?sourcedoc=/site/subsite/Shared%20Documents/ADP%20Portal%20Registration%20Instructions%20Contractor%20Rev%20061212.docx&action=default)).
Execution Time=108.9893 aa11c49c-5974-a070-b2c8-1829a3b17e45 -
Office Web Apps 2013: SSLOffLoad, Cannot connect Sharepoint.
Hi,
Background.
We have a 2 machine SharePoint 2013 farm and a 2 machine Office Web Apps Farm, both of which are behind a load balancer. Our public DNS holds the records for the two farms: webapps.company.com and sharepoint.company.com. However these domains are not in
the internal DNS and cannot be resolved internally. I've put these in the hosts file on the respective machines, so they can talk to each other.
I'm now at the point where I need to connect SharePoint to the OWA farm. I've followed the guide here: http://technet.microsoft.com/en-us/library/jj219455%28v=office.15%29.aspx
and setup the OWA farm by the specification under the heading "Deploy a multi-server, load balanced, office web apps server farm that uses HTTPS".
My creation string
New-OfficeWebAppsFarm -InternalUrl https://machinename.domain.com -ExternalUrl https://webapps.comapny.com -SSLOffloaded -EditingEnabled
That went ok and the farm is created. I then added the second machine
New-OfficeWebAppsMachine -MachineToJoin "machinename.domain.com"
Now that the farm is created i went ahead and ran
New-SPWOPIBinding -ServerName machinename.company.com
But that just gave me "WARNING: The Server did not respond. Trying again"
Adding the -AllowHttp flag let me continue, but that ended up giving me error when i created or opened a document in Sharepoint.
So my guess is that i need to figure out why i cannot use New-SPWOPIBinding -ServerName machinename.company.com without -AllowHTTP.
It was my understanding that we don't have to setup SSL on the individual farm server as the load balanser woudl take care of that.
Any ideas as to why New-SPWOPIBinding -ServerName machinename.company.com won't work?
Thank you for taking the time to read my post
Regards.http://social.technet.microsoft.com/wiki/contents/articles/19039.sharepoint-2013-how-to-enable-office-web-apps-to-work-in-both-internal-and-external-environments.aspx
Because I’ve not configured my OWA machine to be published to the Internet so I have to use its Internet-public IP. It’s not a recommended best practice. In your case, the external URL would be http://owa.abc.com
. Above I’m not using SSL certificate
to encrypt data over the Internet. Just add CertificateName parameter if you want to use whether CA-issued certificate
or self-signed certificate. Finally, check both internal URL (http://app03/hosting/discovery
) and external URL (http://198.xxx.xxx.xxx/hosting/discovery
) to confirm everything is working
well. Your screen should display XML structure.
Now you need to re-bind all SharePoint machines to WAC farm using New-SPWOPIBinding (http://technet.microsoft.com/en-us/library/jj219441.aspx
). Next, you just need to set the WOPI
zone for external use even there is an internal use in your SharePoint environment.
1
Set-SPWOPIZone –zone “external-http”
Finally, configure Excel service and then upload an Excel workbook into a document library and check it. Below are the screenshots of OWA working on both internal and external environment.
http://blogs.technet.com/b/ken_prices_sharepoint_blog/archive/2014/01/15/explaining-the-use-of-internal-and-external-wopi-zones-for-office-web-apps.aspx
If this helped you resolve your issue, please mark it Answered -
Office Web Apps 2013 with SharePoint 2013 Server
Hi All,
I have installed a separate server for Office Web Apps 2013 on Windows Server 2012 VM. I have followed TechNet's article on
Deploying Office Web Apps Server & exactly followed steps.
On SharePoint Server 2013 (Windows Server 2012), I followed TechNet’s article on
Configure Office Web Apps for SharePoint. The Office Web Apps on SharePoint 2013 environment works for
Excel document that shows “View in Browser” but
no Preview.
However, PowerPoint and Word documents doesn’t show “View in Browser”. I thought Internet Explorer 10 has some issue with Office Web Apps and checked on Chrome and results were same.
On SharePoint Server 2013 environment, I have configured 3 services applications, MMS, UPS and Excel Service.
1.) Do I need any other service applications to be enabled for OWA 2013?
I read number of blogs,
Installing Office Web Apps Server for SharePoint 2013 (Steve Mann),
Install Office Web Apps 2013 with SharePoint 2013 (Max Melcher) and Spence Harbar
(Enabling Office Web Apps Preview editing with SharePoint 2013). and all these blogs give more or less same steps that I have followed.
Strange thing is that Excel documents on my SharePoint 2013 sites are working but neither word or PowerPoint documents are not showing option for “View in Browser”.
I am using HTTP and not HTTPS.
2. Can someone please advice how could I solve the Office Web Apps 2010 on Word and PPT?
3. How to can enable preview for Excel, Word and PPT documents.
Thanks you.
Regards,
Aroh
Aroh ShuklaHi Inderjeet and Olafur,
Thanks for your reply.
@Inderjeet: That site collection feature on SP2010 works on our production environment but on SP2013 site collection there is no OWA feature. Microsoft recommends to have a separate OWA2013 server and what I create
a separate VM for OWA2013 server.
@Olafur: Your suggestion looks spot on. The OWA server does show the discovery:
Our SP2013 development server has limited RAM (4GB) and it think is causing the issue.
Let me check if increasing RAM solves the issue.
Thanks again for your suggestions. (Interjeet and Olafur).
--Aroh
Aroh Shukla -
Team
As we have On-Premises SharePoint 2013 and Office Web Apps 2013 server. SharePoint site is running over https and office web apps running over http. Everything seems to be correct and able to view documents in browser.
Once we tried to edit the document in browser (Chrome/IE and Firefox) we getting the pop up "Load unsafe script " in Chrome Firefox and in IE with "This page includes script from unauthenticated sources"
Please help me on this i tried to disable pop-up in chrome/IE/Firefox but did not get success in Chrome/Firefox and we can't do this on each and every machine.
Thanks Ranveer KatiyarUse fiddler to analyse what is causing this issue. You can share traces with me as well.
It might some compatibility issue with browser
It may also be issue because you are trying to execute a HTTPS content in a HTTP online editing tool.
If this helped you resolve your issue, please mark it Answered -
Office Web Apps 2013 + could not establish trust relationship
We currently have a three tier SharePoint 2013 Farm:
1. Web Front End Server (Server 2008 R2 Enterprise) - Servername: TEST2SP013.domain.dom
2. Central Admin Server (Server 2008 R2 Enterprise) - Servername: TEST2SPCA013.domain.dom
3. SQL Server (Server 2012 Datacenter) - Servername: TESTSQL012.domain.dom
All Machines are in the same IP/Subnet.
We are trying to setup a new server (Server 2012 R2 Datacenter) (Servername: TEST022.domain.dom) to run Office Web Apps 2013 in our TEST environment to test the system before rolling in production and have had issues throughout the entire process.
The technet articles we have used are:
http://technet.microsoft.com/en-us/library/jj219435.aspx
http://technet.microsoft.com/en-us/library/ff431687.aspx
http://technet.microsoft.com/en-us/library/jj219627.aspx
We finally have what I thought was a correct setup but anytime we try to edit or view a word, excel, powerpoint document within SharePoint 2013, we receive "Sorry, there was a problem and we can't open this document. If this happens again, try opening
the document in Microsoft Word."
We found a few How-To Setup Office Web Apps sites where other people provided step-by step instructions:
blogs.msdn.com/b/sowmyancs/archive/2012/10/29/install-configure-amp-monitor-office-web-apps-2013-for-sp-2013.aspx
http://www.wictorwilen.se/office-web-apps-2013-securing-your-wac-farm
http://blogs.technet.com/b/justin_gao/archive/2013/06/30/configuring-office-web-apps-server-communication-using-https.aspx
We reviewed the ULS logs and found the following error:
02/14/2014 13:38:40.24 w3wp.exe (0x1C04) 0x1BB4 Office Web Apps
WAC Hosting Interaction adhsk Unexpected WOPI CheckFile: Catch-All Failure [exception:Microsoft.Office.Web.Common.EnvironmentAdapters.UnexpectedErrorException: HttpRequest failed ---> Microsoft.Office.Web.Apps.Common.HttpRequestAsyncException:
No Response in WebException ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate
is invalid according to the validation procedure. at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult) at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar) --- End of
inner exception stack trace --- at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult) at Microsoft.Office.Web.Apps.Common.Ht... 7bed0d51-511d-4541-a059-e2f72942e617
None of the article provide specific step-by-step instructions with using HTTPS in a test environment specifically when it comes to Self-Signed Certs through Active Directory Certificate Services.
We tried creating a Self-Signed Cert through IIS on the Office Web Apps Box which did not work.
We tried creating a Cert through Active Directory Certificate Services which did not work.
We tried adding the Cert through Central Admin > Security > Manage Trust which did not help.
We verified "get-spwopizone" is set to internal-https
We can access the Web Apps https://test022/hosting/discovery site and view the XML with no issue on any machine on our network.
We added our domain to the list of approved domains that can use Office Web Apps as well as add "Domain Users" as the security group that can "EDIT" Office Documents through Office Web Apps.
After each step, we tried performing either a system reboot or IIS Reset on the Office Web Appcs and WFE box.
My Question is how do we generate a certificate (either self-signed through IIS on the Office Web Apps Box or through AD) that will allow this application to work? I read that the Fully Qualified Domain Name needs to be in the SAN field of the Cert but when
we request it, I have no way of entering this information. I tried following http://technet.microsoft.com/en-us/library/ff625722 to manually request a certificate with a Custom SAN but that did not work either.
I am assuming the certificate issue is with the New Office Web Apps box. Is this correct?
-ChrisIf internal cert then you will have to add certificate from OWA to tursted certificates in each sharepoint server plus add the certificate from central admin in Sharepoint through manage trust. Also you will need to install p7b file (file that contains
path to root certificate to verify each intermediate certificate) for internal cert to each sharepoint server to not get certificate error.
sachin -
I've got a brand new Exchange 2013 CU2 farm set up, 2 CAS servers and 2 mailbox servers in a DAG and I'm trying to add an Office Web Apps 2013 server into the mix. First, can someone give me a reason why we would want or need an Office Web Apps server, if
all that's integrating with it is Exchange? From what I've read, it only offers Office document previews, but it appears to already have that functionality. Does it offer editing capability?
Second, I've followed all the guides I can find on integrating OWA (there has to be a better acronym for this) and Exchange, but I'm still getting errors when I try to preview an attachment.
For Word, it says "Sorry, there was a problem and we can't open this document." For Excel, it gives an ASP-style error that says "Server Error in '/x' Application" behind the words "Excel Web App" and a continuous progress bar.
For Powerpoint, it says "Sorry, we couldn't open this presentation because we ran into a problem."
I've tried building a new OWA server, running 2012 R2 and all the updates, and the only commands I've run on the OWA server are "New-OfficeWebAppsFarm", giving the internal URL, the external URL, enabling editing, and giving the friendly name of
the certificate (which is a valid cert). On the Exchange side, I've run "Set-OrganizationConfig -WACDiscoveryEndpoint 'https://fqdn-of-owa-server'" and "Set-OwaVirtualDirectory -WacViewingOnPublicComputersEnabled $true -WacViewingOnPrivateComputersEnabled
$true -ForceWacViewingFirstOnPublicComputers $true -ForceWacViewingFirstOnPrivateComputers $true" for both CAS servers.
I've also tried it from different browsers, and added the OWA URL to the Trusted Sites in IE10 and IE11, but no dice.
Am I missing something? Even if I get the integration to work, what benefit does it give me?Hi,
Office Web Apps Server Integration
http://technet.microsoft.com/en-us/library/jj150495(v=exchg.150).aspx
Recreated Office Web Apps farm and WOPI Bindings on SharePoint as follows:
===================
Remove-OfficeWebAppsMachine
New-OfficeWebAppsFarm -InternalUrl "xxxx" –AllowHttp
Set-OfficeWebAppsFarm -EditingEnabled:$true
Get-OfficeWebAppsFarm
Get-OfficeWebAppsHost -> „allowList“ war empty
New-OfficeWebAppsHost –domain „xxxx“ to add the domain in the allowList
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Office web apps 2013 March update 2013....pdf preview
the web application is configured as permissive.
I did the following
Remove-OfficeWebAppsMachine
updated with the march 2013.
restarted the office web apps 2013 server.
New-OfficeWebAppsFarm -InternalUrl "https://owa.domain.com" -ExternalUrl "https://owa.domain.com" –CertificateName "*.domain.is" -EditingEnabled
New-SPWOPIBinding –ServerName "OWA.domain.is" -Application WordPDF
word / excel preview works
(Invoke-WebRequest
https://wac.contoso.com/m/met/participant.svc/jsonAnonymous/BroadcastPing).Headers["X-OfficeVersion"]
gives an error
PDF does not open in browser.
The updates in January were installed automatically.
Is that maybe the problem?
I have seen this:
http://www.wictorwilen.se/sharepoint-2013-enabling-pdf-previews-with-office-web-apps-2013-march-2013-updateIs it not working only for PDF files? I only used the zone external-https as an example so please confirm that you set the right binding. After all applications have the correct binding you need to create a result type for PDFs:
Site Settings > (Search) Result Types and then finding the PDF Result Type. Choose to Copy the Result Type.
Give the new Result Type an appropriate name, “PDF with Preview” for instance. Then scroll down to Actions and in the “What
should these results look like?” drop-down, choose to use the Word Display Template.
Regards,
Andrew J Billings
Portal Systems Engineer//MCSA,MCSE
Blog:
http://www.andrewjbillings.com
Twitter: LinkedIn:
-
Office Web Apps Farm Connection Issue SharePoint 2013
I have servers owa1 and owa2. Owa1 is acting as host and owa2 I joined to office web apps farm that’s is to owa1.
Both these are in office web apps farm and load balanced. Now my question is: From SharePoint Server when I connect , how should i connect while execute PowerShell command in SP server, in the syntax
–servername parameter what should I specify do I need to specify the FQDN of the server name or host name (officewebapps.jdax.corp.local, this is host record created in DNS by mapping to VIP Of the load balancer (owa1 and owa2).
Please help me.
Thanks, Ram ChYou need to use URL officewebapps for parameter InternalURL
ew-OfficeWebAppsFarm [-AllowCEIP <SwitchParameter>] [-AllowHttp <SwitchParameter>] [-AllowHttpSecureStoreConnections <SwitchParameter>] [-CacheLocation <String>] [-CacheSizeInGB <Nullable>] [-CertificateName <String>] [-ClipartEnabled <SwitchParameter>] [-Confirm [<SwitchParameter>]] [-DocumentInfoCacheSize <Nullable>] [-EditingEnabled <SwitchParameter>] [-ExcelAllowExternalData <SwitchParameter>] [-ExcelConnectionLifetime <Nullable>] [-ExcelExternalDataCacheLifetime <Nullable>] [-ExcelPrivateBytesMax <Nullable>] [-ExcelRequestDurationMax <Nullable>] [-ExcelSessionTimeout <Nullable>] [-ExcelWarnOnDataRefresh <SwitchParameter>] [-ExcelWorkbookSizeMax <Nullable>] [-ExternalURL <String>] [-FarmOU <String>] [-Force <SwitchParameter>] [-InternalURL <String>] [-LogLocation <String>] [-LogRetentionInDays <Nullable>] [-LogVerbosity <String>] [-MaxMemoryCacheSizeInMB <Nullable>] [-MaxTranslationCharacterCount <Nullable>] [-OpenFromUncEnabled <SwitchParameter>] [-OpenFromUrlEnabled <SwitchParameter>] [-OpenFromUrlThrottlingEnabled <SwitchParameter>] [-PicturePasteDisabled <SwitchParameter>] [-Proxy <String>] [-RecycleActiveProcessCount <Nullable>] [-RemovePersonalInformationFromLogs <SwitchParameter>] [-RenderingLocalCacheLocation <String>] [-SSLOffloaded <SwitchParameter>] [-TranslationEnabled <SwitchParameter>] [-TranslationServiceAddress <String>] [-TranslationServiceAppId <String>] [-WhatIf [<SwitchParameter>]]
Hope below article should help you in detail:
http://blogs.technet.com/b/jenstr/archive/2013/03/18/creating-an-office-web-apps-server-2013-farm-with-2-machines.aspx -
Office web app 2013 file not found
Hi,
Trying to access a document preview from sharepoint 2013 i get "file not found" from the office web app server.
In the OWA server uls logs I can see a messege "disk cache file not found" so i looked at the cachelocation and the renderinglocalcachlocation
directories and i can only find the doc preview files in the renderinglocalcachlocation dir.
I also made sure the identity of openfromurlhost and openfromurlweb application pools have access to this documend and i
run the openfromurlenable command.
any ideas ?
thanks.Hi,
Try the following:
1- https://support.office.com/en-nz/article/Configure-disk-based-cache-settings-75429eaf-893a-4a27-bca7-bf75497091de
2-adding OWA
url to the "Trusted Sites".
3-Make sure you have followed the instructions for OWA installation configurations
http://blogs.msdn.com/b/uksharepoint/archive/2013/08/06/scripted-installation-of-sharepoint-2013-and-office-web-apps-server-from-the-field-part-4.aspx
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem -
Hello
I had configured Office Web Apps for SharePoint 2013 which was working fine for about 2 months until this morning.
The error message I get for WORD, PDF and Excel files is:
The ULS logs on the WFE give me this:
WOPI (CheckFile) Proof Data: AccessToken Hash '1572676699' [1054 bytes], URL
01/08/2014 11:01:58.01* w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI afk59 Monitorable
WOPI agxqc Medium WOPI Signature verification
attempt failed with public key 01/08/2014
11:01:58.01 w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI agxqc Medium WOPI
Signature verification attempt failed with public key
01/08/2014 11:01:58.01 w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI agxqb Medium WOPI
Signature verification attempt failed - no public key e75ead18-af27-4d44-ba50-b38b408011e8
01/08/2014 11:01:58.01 w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI ahdzz Monitorable WOPI
Proof: All WOPI Signature verification attempts failed e75ead18-af27-4d44-ba50-b38b408011e8
01/08/2014 11:01:58.01 w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI ag7pj Unexpected WOPI
(CheckFile) - Invalid Proof Signature for file Letterhead Template.docx url: http://site.contoso.com/_vti_bin/wopi.ashx/files/9c5d0d7077aa43e9a9538c02deb57580?access_token=eyJ0eXAiOiJKV1QiLCJhbGciOi
The ULS Logs on my Office Web Apps server gives me this:
Error message from host: Verifying signature failed, host correlation: d197d187-ef9d-42f6-ae4f-c4b8199c1078
WOPICheckFile,WACSERVER FileNotFound
WOPI CheckFile: Catch-All Failure [exception:Microsoft.Office.Web.Common.EnvironmentAdapters.FileUnknownException: WOPI 404
Any idea what may have caused this issue all of a sudden?
Thank you.
YoshiHi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi
Maybe you are looking for
-
Is it possible to upload few column in table through Apex Data Loading
Hi All, I have to do upload into the table through a csv file . The table's primary key i have to load the rest through user's uploaded file. Is it possible to do the data loading to the table only to required columns and fill the other columns from
-
Encountering error while working with Dynamic Regions.
Hi All, I am a beginner in ADF and on a quest to learn ADF. Sometimes I am struggling in the process. Now, when I am working with Dynamic Regions, encountered problem below Step 1 : Created a simple department TaskFlow with Department Form Step 2: Cr
-
Field WSTAT does not allow changes to the document FI
I try leave the field BSEG-WSTAT changeable in document FI. for this, I added field In the table TBAER for account type S, D, K, A. But in the test the field in document is not ready for input. Please help me
-
NO Adapter Engine found in SXMB_MONI
Hello Experts, We have a scenario where we are sending contracts from ECC system to XI and XI send this information to the Seeburger System. We have all these systems in palce. But on trying to process a message i.e generate contarcts from ECC the me
-
Dns server issues with business catalyst, website not loading
Hi there, Trying to upload a new website and it has disappeared saying that the DNS lookup failed. Have checked settings under site management and all looks correct but its still not working any help would be great.