Office Web Apps Farm Across Multiple Data Centers?

I have not been able to find any definitive information about this but the article below seems to suggest what I have in mind is not recommended.  I am not sure about supported.
"Stick to one data center.  Servers in an Office Web Apps Server farm must be in the same data center. Don’t distribute them geographically. Generally you need only one farm, unless you have security needs
that require an isolated network that has its own Office Web Apps Server farm."
http://technet.microsoft.com/en-us/library/jj219435.aspx#topology
What I have is two very well connected data centers located in the same metro area.  We will be deploying a Lync EE pool at each site and use pool pairing for DR.  What I am wondering is should I:
Create a single Office Web Apps farm with the server from each data center as members?
Create a farm in each site with a single member, but both farms sharing the same URL?
Create a farm in each site with a single member, but both farms have different names.  This seems unnecessarily ugly, but throwing it out there.
Since Lync is using Office Web Apps in read only mode the question is different than if SharePoint were involved.  However, I can't rule out this farm also being used for SharePoint down the road.
The LB/RP device of choice is Citrix NetScaler.  Another thought I had is can that be configured so incoming requests for Office Web Apps at each data center can prioritize traffic to the server or farm within that data center?  If that is unavailable
then switch to the server at the other data center?
Thanks.

Hi,
An Office Web Apps farm can be deployed to provide functionality for multiple sites.
Also you can deploy one Web Apps farm on each site.
So I think you can choose to deploy with the option one and three as you said.
Here is a case about deploying Lync deploy Office Web Apps server may help you:
http://social.technet.microsoft.com/Forums/lync/en-US/7e67bacf-4895-4bdb-95b8-0aff8a0c575f/geographical-placement-of-office-web-app-servers?forum=lyncdeploy
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

  • Office Web Apps farm - how to make it high available

    Hi there,
    I have deployed OWAs for Lync 2013 with two servers in one farm. When I was testing, e.g. the case when other server is down I found out the following error:
    Log Name:      Microsoft Office Web Apps
    Source:        Office Web Apps
    Date:          17/03/2014 22:59:54
    Event ID:      8111
    Level:         Error
    Computer:      OWASrv02.domain.com
    Description:
    A Word or PowerPoint front end failed to communicate with backend machine
    http://OWASrv01:809/pptc/Viewing.svc
    Does that means, that OWAs cannot setup as high avaiable when using standalone OWAs only? Above error appeared when the server OWASrv01 was rebooting.
    Petri

    Hi Petri,
    For your scenario, you have achieve a  high performance for your Office Web Apps farm but not high availability. 
    For performing a high availability Office Web Apps farm, you can refer to the blog:
    http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx 
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers
    if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Eric Tao
    TechNet Community Support

  • Office Web Apps Farm Connection Issue SharePoint 2013

    I have servers owa1 and owa2. Owa1 is acting as host and owa2 I joined to office web apps farm that’s is to owa1. 
    Both these are in office web apps farm and load balanced. Now my question is: From SharePoint Server when I connect , how should i connect while execute PowerShell command in SP server, in the syntax
     –servername parameter what should I specify do I need to specify the FQDN of the server name or host name (officewebapps.jdax.corp.local, this is host record created in DNS by mapping to VIP Of the load balancer (owa1 and owa2).
    Please help me.
    Thanks, Ram Ch

    You need to use URL officewebapps for parameter InternalURL
    ew-OfficeWebAppsFarm [-AllowCEIP <SwitchParameter>] [-AllowHttp <SwitchParameter>] [-AllowHttpSecureStoreConnections <SwitchParameter>] [-CacheLocation <String>] [-CacheSizeInGB <Nullable>] [-CertificateName <String>] [-ClipartEnabled <SwitchParameter>] [-Confirm [<SwitchParameter>]] [-DocumentInfoCacheSize <Nullable>] [-EditingEnabled <SwitchParameter>] [-ExcelAllowExternalData <SwitchParameter>] [-ExcelConnectionLifetime <Nullable>] [-ExcelExternalDataCacheLifetime <Nullable>] [-ExcelPrivateBytesMax <Nullable>] [-ExcelRequestDurationMax <Nullable>] [-ExcelSessionTimeout <Nullable>] [-ExcelWarnOnDataRefresh <SwitchParameter>] [-ExcelWorkbookSizeMax <Nullable>] [-ExternalURL <String>] [-FarmOU <String>] [-Force <SwitchParameter>] [-InternalURL <String>] [-LogLocation <String>] [-LogRetentionInDays <Nullable>] [-LogVerbosity <String>] [-MaxMemoryCacheSizeInMB <Nullable>] [-MaxTranslationCharacterCount <Nullable>] [-OpenFromUncEnabled <SwitchParameter>] [-OpenFromUrlEnabled <SwitchParameter>] [-OpenFromUrlThrottlingEnabled <SwitchParameter>] [-PicturePasteDisabled <SwitchParameter>] [-Proxy <String>] [-RecycleActiveProcessCount <Nullable>] [-RemovePersonalInformationFromLogs <SwitchParameter>] [-RenderingLocalCacheLocation <String>] [-SSLOffloaded <SwitchParameter>] [-TranslationEnabled <SwitchParameter>] [-TranslationServiceAddress <String>] [-TranslationServiceAppId <String>] [-WhatIf [<SwitchParameter>]]
    Hope below article should help you in detail:
    http://blogs.technet.com/b/jenstr/archive/2013/03/18/creating-an-office-web-apps-server-2013-farm-with-2-machines.aspx

  • Lync Office Web App Farm External Access using IIS ARR

    When i try to present a powerpoint app when logged in externally i get an error saying that it could not connect to the office web app server.  I need some help with (maybe screenshots) of what the reverse proxy settings should be. Here is some info
    so maybe someone can fill in the blanks.  
    My Office web app server has a private address and sits on the inside. The DNS name is owasrv.mydomain.com 
    The internal url is https://owasrv.mydomain.com
    The external url is https://wacsrv.mydomain.com
    i have a public A record pointing to wacsrv.mydomain.com and my ssl cert has a SAN entry for wacsrv.mydomain.com
    ***NOTE our public and private domain names are the same...that is not a mistake.
    I mostly need help with the what to put in for the url rewrite rules and what to put in when creating the server farm.  Also is it OK that the name of my server is different than the external url address.
    Gerald Csakany

    Hi Gerald,
    Did you follow this guide here http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
    and mainly the section down the bottom which refers to publishing the WAC by matching this pattern ((?:^en-us/|^hosting/|^m/|^o/|^oh/|^op/|^p/|^we/|^wv/|^x/).*)
    and moving the rule to the top?
    What happens when you try to browse to https://wacsrv.mydomain.com/hosting/discovery from external?
    They can be different, I usually make them the same for simplicity, but as long as they're set on the Webfarm it shouldn't be an issue.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)

  • Office Web Apps Farm - undo the AllowHTTP switch

    I allowed HTTP while troubleshooting a cert issue, only to discover that the argument doesn't take a $false option.
    It seems to be enable-only.   Now I want to disable it.  Can I do this via PS or must I do a registry hack?

    Try:
    set-OfficeWebAppsFarm -AllowHttp:0
    or
    set-OfficeWebAppsFarm -AllowHttp:$false
    Notice the ":" instead of a space.
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

  • Office Web Apps 2013 installation issue in HTTPS

    Hi,
    I'm trying to install Office Web Apps Server in HTTPS mode but keep getting an error. When I run the command  New-SPWOPIBinding -ServerName owaserver, it says "WARNING: The server did not repspond. Trying again (attempt 1of 5)." When I go into Event
    Viewer, I see this error for each attempt:
    An operation failed because the following certificate has validation errors:
    Subject Name: CN=<url>, OU=Domain Control Validated - RapidSSL(R), OU=See
    www.rapidssl.com/resources/cps (c)12, OU=<OU>, SERIALNUMBER=<serial number>
    Issuer Name: CN=RapidSSL CA, O="GeoTrust, Inc.", C=US
    Thumbprint: <thumbprint>
    Errors:
     SSL policy errors have been encountered.  Error code '0x2'..
    I've installed the Root CA from the provider, registered the .cer files in CA -> Security -> Manage Trusts, and via PowerShell. I've reset IIS multiple times and rebooted the OWA server and the WFE. I'm not sure if it's an issue with the cert or a
    SharePoint issue.
    Thanks

    Did you register your certificate with the New-OfficeWebAppsFarm command (-CertificateName) when you set up your Office Web Apps farm?
    http://technet.microsoft.com/en-us/library/jj219436.aspx
    - Xenox G.

  • Office Web Apps for Hosted Environments

    Hi there,
    I have a some servers that host two different SharePoint Farms and currently one is connected to an OWA server -
    http://blogs.technet.com/b/justin_gao/archive/2013/06/30/configuring-office-web-apps-server-communication-using-https.aspx
    I want my second farm to use OWA too and was wondering if it is possible to use the same OWA server for this?  So, can I create two Office Web App Farms on the same server?

    Yes you can use OWA for multiple environments. You can refer to below links:
    http://social.technet.microsoft.com/Forums/en-US/78f678cb-69fc-48e6-9f4d-6985154f2d0c/office-web-apps-with-multiple-sp-farms?forum=sharepointadmin
    http://blogs.technet.com/b/office_resource_kit/archive/2012/09/11/introducing-office-web-apps-server.aspx
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • Office Web Apps 2013: SSLOffLoad, Cannot connect Sharepoint.

    Hi,
    Background.
    We have a 2 machine SharePoint 2013 farm and a 2 machine Office Web Apps Farm, both of which are behind a load balancer. Our public DNS holds the records for the two farms: webapps.company.com and sharepoint.company.com. However these domains are not in
    the internal DNS and cannot be resolved internally. I've put these in the hosts file on the respective machines, so they can talk to each other.
    I'm now at the point where I need to connect SharePoint to the OWA farm. I've followed the guide here: http://technet.microsoft.com/en-us/library/jj219455%28v=office.15%29.aspx
    and setup the OWA farm by the specification under the heading "Deploy a multi-server, load balanced, office web apps server farm that uses HTTPS".
    My creation string
    New-OfficeWebAppsFarm -InternalUrl https://machinename.domain.com -ExternalUrl https://webapps.comapny.com -SSLOffloaded -EditingEnabled
    That went ok and the farm is created. I then added the second machine
    New-OfficeWebAppsMachine -MachineToJoin "machinename.domain.com"
    Now that the farm is created i went ahead and ran
    New-SPWOPIBinding -ServerName machinename.company.com
    But that just gave me "WARNING: The Server did not respond. Trying again"
    Adding the -AllowHttp flag let me continue, but that ended up giving me error when i created or opened a document in Sharepoint.
    So my guess is that i need to figure out why i cannot use New-SPWOPIBinding -ServerName machinename.company.com without -AllowHTTP.
    It was my understanding that we don't have to setup SSL on the individual farm server as the load balanser woudl take care of that.
    Any ideas as to why New-SPWOPIBinding -ServerName machinename.company.com won't work?
    Thank you for taking the time to read my post
    Regards.

    http://social.technet.microsoft.com/wiki/contents/articles/19039.sharepoint-2013-how-to-enable-office-web-apps-to-work-in-both-internal-and-external-environments.aspx
     Because I’ve not configured my OWA machine to be published to the Internet so I have to use its Internet-public IP. It’s not a recommended best practice. In your case, the external URL would be http://owa.abc.com
    . Above I’m not using SSL certificate
    to encrypt data over the Internet. Just add CertificateName parameter if you want to use whether CA-issued certificate
    or self-signed certificate. Finally, check both internal URL (http://app03/hosting/discovery
    ) and external URL (http://198.xxx.xxx.xxx/hosting/discovery
    ) to confirm everything is working
    well. Your screen should display XML structure.
    Now you need to re-bind all SharePoint machines to WAC farm using New-SPWOPIBinding (http://technet.microsoft.com/en-us/library/jj219441.aspx
    ). Next, you just need to set the WOPI
    zone for external use even there is an internal use in your SharePoint environment.
    1
    Set-SPWOPIZone –zone “external-http”
    Finally, configure Excel service and then upload an Excel workbook into a document library and check it. Below are the screenshots of OWA working on both internal and external environment.
    http://blogs.technet.com/b/ken_prices_sharepoint_blog/archive/2014/01/15/explaining-the-use-of-internal-and-external-wopi-zones-for-office-web-apps.aspx
    If this helped you resolve your issue, please mark it Answered

  • SharePoint 2013 and MS Office Web Apps - error in sharepoint's url calls OWAps

    I have new SharePoint 2013 Server farm and one dedicated Office Web Apps (OWAps) server.
    This farm is placed in one domain (Acompany.local). There is other domain BCompany.local whitch has both trusted to first domain (two diffirent forests, two company's branches).
    Users from second domain BCompany.local well see intranet portal, build in sharepoint in the first domain (url like http://intranet.Acompany.local).
    But, when they try to use OWAps, f.e. whatching preview or try to open docs for edit in browser - they see error in frame.
    I'm looked it in google chrome's developer tools and find' that sharepoint use wrong url to call OWAps - like http://owaps/... instead of http://owaps.Acompany.local/...
    When I created new office web app farm by:
    New-OfficeWebAppsFarm -InternalURL "http://owaps.Acompany.local" - ExternalURL "http://owaps.Acompany.local" -AllowHttp -EditingEnabled
    And in sharepoint farm new SWOPI binding by:
    New-SPWOPIBinding -ServerName "http://owaps.Acompany.local" -AllowHTTP
    Get-SPWOPIBinding tell that all SWOPI bindings are http://owaps.Acompany.local, but in devtools I continue to see wrong http://owaps/... url
    Any idea to fix this behavior?

    The reason WAC is recommended to be installed on a dedicated server is that it recreates the IIS sites/settings. This is why you're seeing the setting reset itself after restart.
    What I'd probably recommend is creating a script that queries the WAC URL on a regular basis.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Office Web Apps server / Lync server 2013

    Hi I have installed a Lync 2013 Server and Office Web Apps Server. Configured Lync topology, Office Web Apps farm and certificates.
    However when i start the services i get this error message in the log saying Office Web Apps discovery failed.
    Event ID:      41033
    Description:
    Office Web Apps Server (WAC) discovery failed, PowerPoint content is disabled.
    Attempted Office Web Apps Server discovery Url:
    Received error message: Invalid Uri syntax for WAC configuration
    The number of retries: 1,
    Cause: Office Web Apps Server may be unavailable or network connectivity may have been compromised.
    Resolution:
    Check HTTPS connectivity from this box to the Office Web Apps Server deployment using the discovery Url.
    I can access the OWAS server Url from Lync Server
    Connecting to the HTTPS discovery URL is working fine, and brings up the XML-page (after i click "show all content").
    The two servers are located on the same internal network, DNS resolves fine both ways, and no firewall rules blocks any connections between the two. Can anyone please help me figure this out?
    Only identical problem found online is here (Invalid Uri syntax for WAC configuration):
    http://blogs.technet.com/b/dodeitte/archive/2012/09/10/office-web-apps-server-amp-lync-server-2013.aspx
    He resolved the problem by assigning a new OAuthTokenIssuer certificate. This however did not fix the problem in my case.
    Regards
    Sverre A. Veel

    Hi,
    In addition, please make sure you have restarted front end and office web apps server after reissuing the certificate.
    Kent Huang
    TechNet Community Support

  • Office web apps server 2013 install issue

    Dear All,
    when i install office web apps server in  a new server(OS:Windows Server 2008 SP1) with PowerShell Scripts it keep the installing status for more than four hours .  
    what should i do now ,i think it should not take such long time  as i do the same installing in the other server before which takes less than 1 hours.
    beg your suggestions!

    Hey
    please take these points into your considerations:
    - OWA server can be installed on Windows server 2008 R2 or Windows server 2012
    - Log in as administrator and preferred to use domain administrator account specially to create new office web apps farm
    - run the script  
    Add-WindowsFeature Web-Server,Web-Mgmt-Tools,Web-Mgmt-Console,Web-WebServer,Web-Common-Http,Web-Default-Doc,Web-Static-Content,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Security,Web-Filtering,Web-Windows-Auth,Web-App-Dev,Web-Net-Ext45,Web-Asp-Net45,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Includes,InkandHandwritingServices,NET-Framework-Features,NET-Framework-Core
    It takes approximately 20 minutes :)
    Also check this link for Required Server Roles, and Features for Office Web Apps
    http://technet.microsoft.com/en-us/library/jj219435.aspx
    Ahmed Said Moussa SharePoint Consultant

  • Should the Edit in Browser link appear when Office Web Apps is read only?

    Hi,
    We have deployed an Office Web Apps farm in read only mode for licensing reasons.
    There is a binding between SharePoint 2013 and the Office Web Apps farm, everything is working well, except the option to Edit Office documents using Office Web Apps is quite prominent on the ECB menus and document previews.
    Is anyone able to advise whether this is expected behaviour? When the link is clicked a friendly error message states that licensing doesn't support editing, which is correct. I'm just trying to see if the user experience can be improved by a setting that
    we've missed somewhere along the line.
    Thanks in advance.

    Hi,
    Per my knowledge, if you have configured Office Web Apps for SharePoint, the Edit in Browser option will appear in the ECB menu regardless of the licensing of the Office Web Apps.
    So I recommend to use CSS code to hide the Edit in Browser option if you do not want the user to use it.
    Edit the page of the document library view page, and then add a Content Editor web part to the page.
    After that add the code below to the Content Editor web part:
    <style>
    a[Title="Edit in Browser"]{
    display:none !important;
    </style>
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Office Web Apps 2013 Error

    Hi all,
    Currently we are facing a problem in our Sharepoint 2013 environment with Office Web Apps Server.
    Initially we connected the Office Web Apps farm to the Sharepoint farm and it worked well, but suddenly, we are not able to see the previews of the documents in the hover pannel or openning the documents in a new window or same window (doesn´t matter). We
    receive the following error message:
    Sorry, something went wrong
    An error has occurred on the server.
    This with a correlation error code, if we search this error code in Sharepoint we find the following information:
    WOPIFrame - Unhandled exception: System.ServiceModel.CommunicationObjectFaultedException: The communication object, System.ServiceModel.Configuration.ConfigurationChannelFactory`1[Microsoft.SharePoint.IdentityServices.IApplicationSecurityTokenServiceContract], cannot be used for communication because it is in the Faulted state. at System.ServiceModel.Channels.CommunicationObject.ThrowIfDisposed() at System.ServiceModel.ChannelFactory.EnsureOpened() at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address, Uri via) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.GetInternalAppStsChannel() at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.<>c__DisplayClass2.<RequestSelfIssuedToken>b__0()
    at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.IdentityServices.SPApplicationSecurityTokenServiceClient.RequestSelfIssuedToken(RequestApplicationSecurityToken rst) at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.RequestRawLoopbackToken(OAuth2EndpointIdentity endpointIdentity, JsonWebSecurityToken onBehalfOf, String applicationContext) at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.IssueLoopbackTokenString(Uri endpointAddress, SPIdentityContext identityContext, String applicationContext, DateTime& validTo) at Microsoft.SharePoint.IdentityModel.OAuth2.SPOAuth2SecurityTokenManager.IssueLoopbackTokenString(Uri endpointAddress, SPUser user, String applic...
    ationContext, DateTime& validTo) at Microsoft.SharePoint.Utilities.SPWOPIHost.GetAccessToken(SPWeb web, Guid uniqueId, String proofKeyId, SPUrlZone zone, SPBasePermissions perms, Boolean hasEditLicense, Int64& ttl) at Microsoft.SharePoint.Utilities.SPWOPIHost.GetAccessToken(SPFile file, String proofKeyId, SPUrlZone zone, Int64& ttl) at Microsoft.SharePoint.Utilities.SPWOPIHost.GetWOPITargetInternal(HttpContext httpContext, SPWeb web, Object& spPrimeObject, SPWOPIAction& requestedAction, SPRegionalSettings spSettings, String& wopiAppUrl, String& wopiFavIconUrl, String& wopiAccessToken, Int64& wopiAccessTokenTtl, String& errorMessageToDisplay, String& redirectUrl) at Microsoft.SharePoint.ApplicationPages.WOPIFrameHelper.OnLoadHelper(WOPIFrame frame) at Microsoft.SharePoin...
    t.ApplicationPages.WOPIFrameHelper.OnLoad(WOPIFrame frame)
    anyone has faced a problem like that?
    Thanks in advance

    Stephan,
    1.  with the Get-OfficeWebAppsMachine command I can see that Health Status report as Unhealthy, but the reason for that is the certificate, it does not include the fqdn of the office web apps machine (Yes, I know that this is not the optimal configuration)
    2. If we try to navigate trought the URL
    https://..../hosting/discovery it shows the xml file of the owa server, no problem here
    3. Get-spwopibinding shows all the bindings configured as default, we haven't done changes here
    4. get-spwopizone = external-https the sharepoint platform is published as extranet trought a TMG, office documents can be accessed externally by WOPI server
    5. I have tried both methods, with true and false with the same result, I have tried to reboot several times the WOPI server.
    And for the final question, yes I have checked the event logs, but shows nothing, I think that is more a problem of Sharepoint previews than other problems

  • Office Web Apps 2013

    I've got a brand new Exchange 2013 CU2 farm set up, 2 CAS servers and 2 mailbox servers in a DAG and I'm trying to add an Office Web Apps 2013 server into the mix. First, can someone give me a reason why we would want or need an Office Web Apps server, if
    all that's integrating with it is Exchange? From what I've read, it only offers Office document previews, but it appears to already have that functionality. Does it offer editing capability?
    Second, I've followed all the guides I can find on integrating OWA (there has to be a better acronym for this) and Exchange, but I'm still getting errors when I try to preview an attachment.
    For Word, it says "Sorry, there was a problem and we can't open this document." For Excel, it gives an ASP-style error that says "Server Error in '/x' Application" behind the words "Excel Web App" and a continuous progress bar.
    For Powerpoint, it says "Sorry, we couldn't open this presentation because we ran into a problem."
    I've tried building a new OWA server, running 2012 R2 and all the updates, and the only commands I've run on the OWA server are "New-OfficeWebAppsFarm", giving the internal URL, the external URL, enabling editing, and giving the friendly name of
    the certificate (which is a valid cert). On the Exchange side, I've run "Set-OrganizationConfig -WACDiscoveryEndpoint 'https://fqdn-of-owa-server'" and "Set-OwaVirtualDirectory -WacViewingOnPublicComputersEnabled $true -WacViewingOnPrivateComputersEnabled
    $true -ForceWacViewingFirstOnPublicComputers $true -ForceWacViewingFirstOnPrivateComputers $true" for both CAS servers.
    I've also tried it from different browsers, and added the OWA URL to the Trusted Sites in IE10 and IE11, but no dice.
    Am I missing something? Even if I get the integration to work, what benefit does it give me?

    Hi,
    Office Web Apps Server Integration
    http://technet.microsoft.com/en-us/library/jj150495(v=exchg.150).aspx
    Recreated Office Web Apps farm and WOPI Bindings on SharePoint as follows:
    ===================
    Remove-OfficeWebAppsMachine 
    New-OfficeWebAppsFarm -InternalUrl "xxxx" –AllowHttp
    Set-OfficeWebAppsFarm -EditingEnabled:$true
    Get-OfficeWebAppsFarm
    Get-OfficeWebAppsHost -> „allowList“ war empty
    New-OfficeWebAppsHost –domain „xxxx“ to add the domain in the allowList
    Thanks,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Issue with office web apps sorry, there was a problem and we can't open this document.

    Hi All,
    i am having issue when trying to open the word file using office web apps farm. i have multi-tier farm (2 wfe, 2 apps and 2 owa). is that something wrong with certificate or the way AAM configured. Can anyone give me some direction please?

    Hi,
    According to your description, my understanding is that you failed to open the word file using office web app.
    Please open the word file using office web app in other SharePoint sites and test whether this issue occurs. Also, please test whether all words have this issue.
    Please reset IIS on the OWA server.
    Please disconnect the SharePoint Farm from Office Web Apps and reconnect it. Then check the WOPIZone and TMG server.
    Please created certificate for your PC and update mappings of IP addresses.
    Some useful posts for your reference:
    https://social.technet.microsoft.com/Forums/office/en-US/fdbf2198-5a62-422a-9015-a65599eabeb5/office-web-apps-2013-sorry-there-was-a-problem-and-we-cant-open-this-document-if-this-happens?forum=sharepointadmin
    https://social.technet.microsoft.com/Forums/office/en-US/154e9673-8227-4913-9f2a-97677e4c5314/sorry-there-was-a-problem-and-we-cant-open-that-document?forum=sharepointadminprevious
    http://sharepoint.stackexchange.com/questions/66013/a-problem-with-a-websites-security-certificate-for-apps
    Best Regards,
    Dean Wang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for

  • Swc problem with flex from my custom fla

    I have an fla which has several library items with a class linkage to a GenericButton.as file. I am exporting this fla as an swc file, and linking that swc into flex. My problem is that when flex builds the code for GenericButton it gets undefined pr

  • Can I manage multiple iPads with the same Apple ID?

    I have a client that will have 4 iPads at a trade show to use as displays for a small animation about their product. We will need to install a kiosk app from the app store on all iPads. I'm confused about how Apple IDs fit into all of this. Will I be

  • Deactivate the "Control Point # X,Y" labels in Motion 3?

    Is there away to turn off the overlay labels that pop up when you're animating mask and shape control points? They're obstructing my view obscenely. I can't figure out how to turn them off. There's not an option to deselect them in the View -> Overla

  • Download problems with GarageBand

    I am new to this, so excuse my ignorance please. As far as I can tell, I do not have GarageBand on my eMac. I tried to download GarageBand 1.1 but I get the error message that says GarageBand is not found in /Applications. I found some advice that sa

  • Blinking folder even after replacing hard drive

    I Was skyping with a friend went to do something came back i was sighnd out of skype and my computer froze i restarted then it gave me a blinking file witch means failing hard drive so i put in my old hard drive that i knew works and still gives me a