Officejet 4630: Error code 0XB00A7A4E and it's all it does.

Hello, my Officejet 4630 had some problems, yesterday it asked me if I wish to install ne w firmware and I thought this would solve the problems, so I clicked ok.Now it does not do anything anymore.It displays error code 0XB00A7A4E, and beeps all the time. I took out the USB, the power, waited... same thing.The Online forum says that one should open it and take out the cartridges, but when I open it, the cartridges do not come to the middle, to the "removable" area. So it is completely stuck.Any help? Thank you!

Hello , Welcome to the HP Community!I hope you have a pleasant experience here. I'd like to help you with the 0XB00A7A4E error that you are getting on your HP Officejet 4630 e-All-in-One printer. Errors such as the one you are experiencing can either be caused by a firmware issue, or a jammed carriage. It can be difficult to tell which. One of the most common fixes for a firmware error is to plug the printer directly into a wall outlet. The printer has a power moderator built in, so if it is plugged into a surge protector or battery backup, it often causes a power fluctuation. This can result in firmware errors similar to what you are experiencing. I'd recommend trying this first. If that doesn't immediately resolve the issue, I'll get you to check the cartridge carriage inside the printer. Is it locked in position? Are you able to move it at all? If you can move it, I recommend uninstalling and re-installing the cartridges. If not, I'd recommend contacting our HP Phone Support for further assistance:Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your
contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone
number I hope this helps!

Similar Messages

2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

Read this.

Windows Update Error Code 80070663 and 64C

I am running x64 Vista on an HP Pavillion dv9000 laptop.
I was cleaning up my desktop when I saw a Word doc I didn't recognize. I tried to open it and got a Windows Installer window saying "Preparing to Install". I have an activated, legal version of Microsoft Office 2007. This is the first time
I've seen that window pop up. I let it try to install whatever it's trying to install and it comes up with an error: "This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application
vendor to verify that this is a valid Windows Installer update package." I am the administrator on this computer. I have full access to all files.
This prompts me to start Windows Update to see if that will fix it. That's where the error codes come in. The windows updates: "Microsoft .NET Framework 3.5 Family Update (KB959209) x64" and "Security Update for Microsoft Visual C++ 2008 Service
Pack 1 Redistributable Package (KB2538243) yielded the error codes 80070663 and 64C.
I noticed when I press Start, the power button occasionally says "Installs Updates then Shuts Down". I didn't click it because I had work open I needed to work on later. Then when I left the computer and came back, the power button didn't have
the shield on it that said "Installs Updates then Shuts Down". I shut down my computer anyway and it didn't install any updates, and this is where I'm at. I've retried installing the updates via Windows Update and it still shows the original error
codes.
I've researched this error and came across Microsoft Fix It, downloaded as: "MicrosoftFixit.wu.LB.137269729445221149.2.1". I've run it and it did not solve the problem.
Please help,
Jake

Jake, did you ever find a solution to your problem? I'm afraid I can't help if you didn't, but I'm experiencing the same problem.
I also run Vista and had no problems until recently when I had an installation failure on 12th April 2014 for the same two updates:
Microsoft .NET Framework 3.5 Family Update (KB959209) x86 - (Installation status: Failed. Error details: Code 80070663)
Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) - (Installation status: Failed. Error details: Code 64C)
I don't know whether it's these updates that caused the problem or an earlier update that has stopped these updates been installed. The PC is generally working but Word & Excel don't load any more. I get a 'Preparing to install' popup follwed by
the message: 'This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.'
If you did find a solution or any one else knows of one then I'd be very grateful.
Dave.

Error Codes 1630 and 1722 when installing FSX in Windows 8.1

Multiple efforts to install Flight Simulator X Gold on my new 8.1 system always results in error codes 1630 and 1722 at the end of the installation process. Lots of searching the net suggests that this not an uncommon problem. After trying a
number of possible fixes suggested by a Microsoft Support Engineer in a thread on the Microsoft Community Forum without success, he referred me to this forum.
In summary: After initially transfering a working version of FSX from my XP machine to the new 8.1 machine with LapLink it worked flawlessly. A subsequent misdiagnosed printer issue by Dell tech support resulted in a refresh of 8.1 wiping out FSX (and
many other apps). Efforts to reinstall FSX from the either the original disks or a newly purchased set of disks both resulted in the error codes at the end of the installation process. Failed resolution efforts include so far include:
- All recommendations in kb/258496 (including Xcopy which appears not to work on 8.1 at all)
- Clean startup procedure from kb/331796 (8.1 froze up hard in trying it)
- System File Checker per kb/929833 showed "did not find any integrity violations".
- Licensing Reset Tool program per kb/928080 resulted in: "Cleaning up Token Store at: C;\Program Data\Microsoft\SLDL\Software Licensing Failed to delete the token store ERROR --HRESULT 800405"
Bottom line seems to be that this is recurring issue with 8.1 and FSX but neither I or the Community Forum have been unable to find an effective solution. Any advice/help/recommendations would be appreciated. Will be glad to provide needed additional
info as needed.
Mark Davis

- Licensing Reset Tool program per kb/928080 resulted in: "Cleaning up Token Store at: C;\Program Data\Microsoft\SLDL\Software Licensing Failed to delete the token store ERROR --HRESULT 800405"
try this solution replied by Colin Vincent
http://www.justanswer.com/computer/7b2g4-using-fsx-years-when-loading-receive.html
you should post in this support forum
http://www.microsoft.com/Products/Games/FSInsider/community/Pages/

I need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009". and after they said "we could not complete your request. There was an error in the App Store. Please try again later (nul

i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009".
and after they said "we could not complete your request. There was an error in the App Store. Please try again later (null)".
COMPUTER DETAILS: MacBook Pro 13-inch, Mid 2012 OS X Version 10.9.5; Processor 2,5GHz Intel Core i5; Memory 4 Go 1600 MHz DDR3.
Thanks beforehand!!!

Error
what is error code 1009?

Error code 600 and 500 on autodiscover in Exchange 2010

Hi,
I have a problem on Exchange 2010 Autodiscover, the error code 600 and 500, Please see below message and please help to fix this error.
<?xml version="1.0" encoding="utf-8"
?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
Thanks,
ShutMo

Hi,
The website https://host.abdomain.local/autodiscover/autodiscover.xml
Shows the following error:
<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns= "http://schemas.micosoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<Errorcode>600</Errorcode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Test Email Autoconfiguration
<
I have do "Test Email Autoconfiguration" and have the following log:
Guessmart POP: server pop3.aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, initializing
Guessmart POP: server pop3.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Attempting URL https://host.abdomain.local/Autodiscover/Autodiscover.xml found through SCP
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
GetLastError=0; httpStatus=500
Autodiscover request completed with http status code 500
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml failed (0x80004005)
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, failed (0x800CC4005)
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port 110, ssl=Yes, tls=No, spa=Yes, starting
then I received another failed.
Please advise.
Thanks,
Shutmo

My ipod classic keeps showing error code 1439 and says its corrupted and nothing on the site that it says to do is working has anyone else had the problem

my ipod classic 160 gb keeps showing error code 1439 and says it is corrupted and i have done everything the article on it says to do and still reads the same thing. has anyone else had the same problem if so what can i do to fix it. the ipod is only 2 months old

If it is under warranty, bring it in to Apple Store, most of our suggestions, comes from the Apple support site..
Besides Restoring the iPod, there are winsocks which have conflict with iTunes, perhaps, disable those plugins and disconnect the Internet and stop antivirus, while you are Restoring or Syncing the iPod.

Windows Updates Error Codes 80070308 and 80070643

Recently I have a problem with windows updates patches for this month (June 2014). I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643. I tried to disable the Symantec Endpoint, used the Microsoft
.NET Framework Repair Tool to fix the .Net Framework related error but still have failure. I can still finish all the failed patches by rescanning the PC than install them; however; I still have 40 PCs need to be patched. How do I prevent
the installation failure, all the PCs have no problem at last month. Any suggestion, many thanks.

Hi,
If your computer is having problems finding and installing operating system update, I suggest to
try the windows update troubleshooter.
To run a Windows Update troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
An automatic troubleshooter is available that fixes some problems with Windows Update, and it might resolve this error for you
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
this error can appear when installing updates for Microsoft Office 2003,
to fix Windows update with error code:80070643:
http://windows.microsoft.com/en-us/windows/windows-update-error-80070643#1TC=windows-7
If your computers are in a domain environment and get updated by a WSUS server, I suggest to update the group policy with the command “gpupdate /force”.
Meanwhile, if it doesn’t help, please upload the Windowsupdate.log at: C:\Windows, this will give detail error information for further support.
Regards
Wade Liu
TechNet Community Support

Frozen ipod after new updates, will not recover, error codes 1601 and 1602

i updated my ipod last night, was working fine, turned off, then on again this morning. was working fine this morning for a while, then went completely blank, will not start up, just completely dead. i have tried to restore,several times and get error code 1601, and 1602. have tried restarting my computer,checking for updates, restarting my itunes, using another computer, tried another lead, and everything else suggested by support. it will just not do anything. has anyone got any suggestions, please.

I would suggest that you put your iPod into the recovery mode and restore it. Next time something like this, it is better to start with the more basic troubleshooting steps first before trying to restore. The two easiest are restart and reset.
Try these steps with your touch.
1. Unplug the device from your computer
2. Turn the touch off - hold the Sleep/Wake button down until you see the red slider and turn the device off. Note: this may not work. If not, go to the next step.
3. Start iTunes
4. Hold the Home button down and keep holding it down while you plug your iPod back into your computer.
5. Keep holding the button down until iTunes tells your "that an iPod in Recovery mode has been detected".
6. Let go of the button and follow the on screen instructions to restore the touch.

FAX Error Codes 349 and 351

I try to fax my daughter in Florida which is area code 941 and I live in area code 580 (Okla) and I constantly get
Error Codes 349 and 351. I called her numerous times and she is receiving faxes frin all over the country with no problem. Why can't HP find this problem and help me resolve it. I was on the phone over 4 ours with a tech rep and she was unable to resolve it and said she would refer it to her case manager who would not be able to fix it, but would call me sometime on Monday. This is a ridiculous situation. I can send faxes locally with no problem. I have a fiber optics telephone connection. Does anyone have a possible solution. I am really fed up with HP and having to try to explain situations to someone in a foreign country where everything I say has to be repeated back to me takiing up more time.

Hi nmcclell,
I am sorry to hear you are experiencing this issue. I am sure after spending 4 hours on the phone with HP tech support the last thing you want to do it more troubleshooting but I have some information specific to those error codes if your interested. In the unlikely event that maybe something was missed here is the definition and solution for error code 349 and 351.
Error Code: 344, 345, 346, 347, 348, 349 ECM, 350 ECM, 351 ECM, 352 ECM, 353 ECM, 354, 355
Definitions
The remote machine failed to respond to a fax command from the local machine because the connection was interrupted. These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line). Other reasons can include power outages and other power-related problems.
The call-waiting service can cause this error. The click, heard for an incoming call, is actually a momentary disconnect of the line.
The remote user pressed the Stop key while the reception was in progress.
Under rare conditions, incompatibility between the two machines might cause the remote machine to abandon the call.
Solutions
Retryt the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Disable ECM. Errors might still occur, and might result in a degraded image quality on the received page. However, the ability to send the entire document will be improved.
Try sending at a lower transmission speed
Here is a helpful link for Troubleshooting Fax Transmission and Reception Issues.
I hope this helps. I understand if you are not interested in more troubleshooting but thank you for taking the time to reach out to the HP Forums. We are here to help.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Testing ABAP Web dynpro: Error code 403 and for the reason Forbidden

Hi,
We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
Thanks
Arunava
However we are getting the following service error
Service cannot be reached
What has happened?
URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team

Hi,
this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
However for some ABAP web dynpro ( for some application XRPM ) I get some peculiar error. Please see below and if you could think of anything out of these.
I have already checked and found the both HTTP and SMTP services are working fine.
The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

'The termination occurred in system E03 with error code 403 and for the rea

hello gurus,
i am very new webdynpro for abap.i strucked in one place at the time of designe a webdynpro component.
i created one webdynpro component with one view.when i am going to design the view it is showing an error like .
Service cannot be reached.
'The termination occurred in system E03 with error code 403 and for the reason Forbidden'
for this we need to activate some service at sicf transaction level.
could anybody suggest me which service i need to activate to overcome my problem.
best regards,
raja.

If you are creating webdynpro component for first time then check the below link and activate the service mentioned.
http://translate.google.co.in/translate?hl=en&sl=de&u=http://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008b4d9ae10000000a155369/content.htm&ei=C56BTqinCMTqrAfr5sycDg&sa=X&oi=translate&ct=result&resnum=1&ved=0CB8Q7gEwAA&prev=/search%3Fq%3Dhttp://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008
First check above one.
this is for understanding
http://sdnabape.blogspot.com/2010/11/step-by-step-configuration-for-running.html
Regards
Srinivas

When upgrading quicktime, I get an error code: -3, and itunes will not run.

when upgrading quicktime, I get an error code: -3, and itunes will not run. How do I fix?

i 'm very interest because on 3 PC , i have the same problem and i work at tv producer...

When I download the digital copy of the Hunger Games, it stops at 4.0GB and first returns an error code -1309 and then the code -50. Please help me complete the download.

When I download the digital copy of the Hunger Games, it stops at 4.0GB and first returns an error code -1309 and then the code -50. Please help me complete the download. I have tried removing the .tmp folder and downloading it again, but each time it stops the download in the same place.

I discovered the solution. The external drive I was saving it to was formatted as FAT32. In that format, the largest files can only be 4GB, which explains why it kept stopping at 4GB. I backed up all the files then reformatted it as Mac OS Extended (Journaled), this is possible since I am on an iMac.

I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

Maybe your firewall or security software are preventing the download from finishing. You could try disabling them until you finish the download

Officejet 4630: Error code 0XB00A7A4E and it's all it does.

Similar Messages

Maybe you are looking for