Officejet 5610 - can I connect it with the usb to a router home network, instead to connect to the c
Hi, Is it possible to connect Offcejet5610 with usb to a router home network, instead to a computer?
Yes, if the router supports USB printers (not just hard drives). Also, the only function that will be supported will be printing, nothing else.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
I was told I could set a local network with the airport express, apple Tv, and my iPad to stream videos or pictures to a TV for a presentation.
No internet connection is available at the location.
Is that possible? Or do I need to access itunes homeshare with an internet connection to make this work?
I've set it up at home where I have an internet connection and it works fine but I want to move the setup to my church for a class. The data I'm using is stored on my ipad.
I know I can do this wired with the HDMI adapter but would like to do it wireless.
Thanks for any help!Ok so we now have a solution to the problem. A friend of mine came round to work this out with me last night and we were able to get it working, but it is not as easy as I had hoped. Fisrtly we plugged the airport express into my router using the ethernet cable (for this I am using an Airport Express Base Station") and in airport utilities selected the airport express. In edit, we then gave the airport express a new range of IP address which did not conflict with any of the other applications that I have already assigned. We also named the Airport Express with a distinguishable name. We then waited for the changes to be registered then unplugged the Airport Express from the router. I then plugged my AppleTV via HDMI into a tv to test it and selected the new wifi network with the new Airport Express distinguishable name. I was able to watch a video that I have on my ipad directly on my tv without being connected to the internet, and was able to play Airplay presentations.
No the easiest solution, and certainly not something that anyone at Apple has talked me through in my lengthy conversations with them at Applecare.
Hope this helps. -
I own the first iPad. I've got a Camera Connection Kit. Can I used it with the first iPad.
Yes, it's compatible with the first gen iPad - I use one with mine.
-
Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank youPlease refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree -
So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
i have a macbook pro from 2009 and the software is 10.5.8 how do i update it so i can have more interaction with the applications
Note some programs may not work with Lion or later
Upgrading to 10.7 and above, don't forget Rosetta! -
the background behind my pages has turned black, how do i get it to go back to grey? i have switched between preview, normal, bleed, slug and presentation and closed and opened in design and it is still black. I can't imagine layouts with the black background please help!
or maybe the interface has been set to Dark?
Go to Preferences > Interface tab, choose Light from Color Theme dropdown on Apearance section (upper part of the window) -
I have a new MacBook Air with Yosemite (no CD/DVD capacity). I want to install Photoshop Elements 6. Can I do this with the serial number? If pse 6 is not compatible, can I upgrade to pse 7. I do not need pse 12 or 13
I cannot answer regarding compatibility, but there is no download available for PSE6 if you would need one for this. You might be able to copy the installation files from a disk to some other removable media that the machine accepts. Upgrading to PSE7 would not be possible mainly because Adobe does not sell older versions of their software.
-
Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate...Thanks for all the helps...
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times -
In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?
Check those boxes in the export dialogue - Exporting From iPhoto
LN -
Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karanHello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran -
I can't drag files with the mouse
Just installed Mountain Lion. After about four days I can't drag files with the mouse. Not across the desktop or from Finder window to Finder window.
I have the same problem, I have posted the below here: https://discussions.apple.com/thread/4152036?start=0&tstart=0
I have exactly the same problem on Mountain Lion- I go to drag files from the finder to another finder folder or the desktop and when I go to release the mouse button the file stays in a "hover" state, as if I hadn't released the mouse. It then follows my mouse cursor around forever. Very frustrating.
I have rebooted several times - any ideas? -
Can Minidisplay Port work with the new Thunderbolt Display?
I have a 2009 MBP 15 inch with Mindisplayport.
Can Minidisplay Port work with the new Thunderbolt Display?
If not, is there any adaptor i can use to make it work.
I also have the new MBA with thunderbolt socket.
Cannot decide which display to get.
Thanks.Here's a new article that basically covers and clears up all the new Thunderbolt display questions (same things I previously stated).
Enjoy!!
http://www.tuaw.com/2011/09/18/thunderbolt-display-daisy-chaining-spec-cleared-u p/ -
why can't i login with the account i just created???? I am missing an important session!!!!
Hello ljp1,
What browser are you using to log in to your brother account? It could be a problem with some settings within your browser that is giving you grief.
Try going through these troubleshooting steps to see if it helps resolve the issue.
http://goo.gl/TTH2s
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?
There is another setting for "Start Conversation from", that needs to be set to phone number.
Maybe you are looking for
-
ICal on my iphone 4 is NOT searching all events in my Clandar !
iCal on my iphone 4 is not searching all events in my Clandar ! I just noticed I had an Entry called "Ashu" appearing in 2009 many times all the way till date. But on my iMac's ical when i search the entry, it shows up just fine in all days it exists
-
How do i get ios on my ipod touch?
i just updated it on a new computer, but to download apps i have to have ios 5? i cant even find this ios thingy let alone number 5! it's the 5th generation ipod touch
-
Invoice correction / price correction.
Hi Gurus, Can any one please tell what is Invoice correction / Price correction also please tell me the required settings to be done in SPRO Regards Guest
-
I have implemented drag & drop using a datagrid and a list control. The items that need to be dragged are a simple value object that conatin data. Everything works as far as the drag/drop operations, however, I need to be able to know which item has
-
html:select with horizontal scroll bar
I created list with fixed width, some records are long, I need a horizontal scrollbar to to view whole records. I use IE. How can I do this? Please help. piece of code.. <html:select property="pickedC