Officejet 6000 e609n cannot convert to from USB to wireless

I am attempting to convert the connection to my Officejet 6000 E609n printer from USB to wireless (XP Pro SP3). After going to the HP icon on my Application Menu and navigating to the “Configure Wireless Settings” the following sequence of events occur: 1) A window with the title “Installing Officejet 6000 e609n” opens. As it opens the progress bar shows set 3 of 4. 2) A window titled “Network Setup” opens with an instruction “Temporarily connect the printer to your computer using a USB cable.” A box in the lower left corner of the window is to be checked if you printer is already connected via USB cable. (Mine is, and has been for some time.) 3) After checking the box and pressing NEXT, another window opens to select the printer being installed. The HP Officejet 6000 e609n series is the only printer listed. I select it, and press Next.) This message comes up: “Selected printer is not present. Please connect the printer and press Retry or press Cancel to select another.” I then cancel my way out of setup. I can print a test page and other jobs from the computer via the USB connection – no problems. What could be causing this? FYI I have gone thru the reset routine, no change. I could not find a similar situation on the wireless printer forms.

I am having the same prob. No resolve yet.

Similar Messages

Cannot find hp officejet 6000 e609n wirelessly

Cannot find hp officejet 6000 e609n wirelessly. URL: http://0.0.0.0 Network Status: Offline. Active Connection Type: None

IP address of 0.0.0.0 means it is not connected to your wireless network.
Run the Wireless Setup Wizard from the front of the printer (in the Network menu).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet 6000 E609n prints on USB. I am unable to get it to run wireless

HP Officejet 6000 E609n Win 7 64 bit
My printer works on a USB connection but I have not been able to get it to
function on a Wireless to router connection.
Router is Linksys WRT160N V3.
I have used all the recommended solutions in HP's instructions.
This question was solved.
View Solution.

Ok, since you get the error "The selected printer is not present." during the installation, here is some troubleshooting that should help narrow down the cause/resolve the issue:
The Printer is Not Found During Network Installation in Windows
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

My HP officejet 6000 E609n wireless does not print on envelopes.

My HP officejet 6000 E609n wireless does not print on envelopes. When I send an envelope address from the Microsoft Word envelope app, the envelope loads and then it is send through the printer without printing on the envelope. If instead of loading an envelope I load a plain sheet of 8x10.5 paper it will print the address as it should (side ways and on what would be an envelope). I have had no problem printing envelope to my old DeskJet 930C with this Word envelope app.
I load the envelopes without the 8x10.5 paper and the paper guide moved over to the edge of the envelopes up which are against the right side of the load table as indicated on the tray guide.

After many frustrating and fruitless attempts to solve this problem, including updating the drivers and following so many bits of advice from so many sources including contacting HP customer services by phone and email (who have not, so far, shown the courtesy of acknowledging my enquiry), I seem to have overcome the problem by cutting a piece of A4 paper along its length to a width, which when added to the envelope’s height, equals the width of an A4 sheet. For example, I use DL envelopes which have a nominal width of 110mm so the width of the piece of paper cut from A4 (which is 210 mm wide) is 100 mm. This strip is then temporarily attached to the envelope by piece of low tack tape (such as masking tape) running along and joining the paper and the envelope tabs. I feed this assembly of strip and envelope into the printer in the default position, (i.e. the envelope on the right hand side of the tray, face down with the sealing tabs on the left). The printer seems to treat this assembly as a piece of A4 and prints the address etc on the envelope correctly. The envelope is then easily detached from the tape without damage and I have found that this works many times as sufficient tack remains on the tape. I know this sounds a little complicated but it soon becomes a simple task.
The HP Officejet 6000 printer has previously worked splendidly, printing envelopes from the Word 2007 envelopes function running on XP but has only recently malfunctioned since changing to Windows 7. For the record, I have also tried to print envelopes using the Word compatibility mode without success.

How do I change my photosmart plus printer from usb to wireless

Could not get my wireless photosmart printer to connect to my computer and had to do it by way of usb hook up. I am operating win 7. How do I now convert from usb to wireless?

Hi,
What is your printer ? Please try this:
Click Start > All Program > HP > HP Photosmart {your printer} > Printer Setup & Software.
You should see a screen, select "Convert a USB connected printer to wireless"
Follow instruction from there.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Officejet 6000 (E609n) won't print anything

I'm running Windows 7, SP1 and have my E609n hooked up via usb, with the wireless off.
My power button is flashing continuously, with no other lights coming on. Every 30 seconds or so it produces a sound that sounds like a single cycle of the roller. Print jobs spool, but the printer never changes state. If I lift the lid the print head moves over and the power light goes solid with the paper feed light soild. When I close the lid it goes back to just the power light flashing.
I've reset the printer with the unplug/hold power button method and reset the print spooler. When I power the printer back up it cycles normally and returns to power light flashing state when it's done booting. I've also tried uninstalling and reinstalling the printer from my system. No change.
It's out of warranty, so I'm curious if there's anything else I might be able to do. Thanks.

Hi @panicbot
I see your power button is flashing continuously, with no other lights on. Please use the following document to troubleshoot the issue; Blinking Lights on the HP Officejet 6000 (E609a) and 6000 Wireless (E609n) Printers.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cannot Delete Folders from USB drive connected to Airport Extreme

When I try to delete files from the usb drive connected to my airport I get "cannot remove folder, the directory is not empty.
This only happens for some of the folders that are empty. No problem deleting any files whether they were created before or after I setup the airport. The folders that won't delete were created after I hooked up the drive to the airport however, I can make new folders and delete them no problem now. The ones that don't delete say "read only" in the properties. when I uncheck read only it reverts back to read only automatically.
Any ideas what might be causing this?

Tried what you suggested last night - no change. What is odd, though, is that I can create a new folder on the external USB HDD (through the Hub) and copy a file into it. While I can then close Finder, re-open and see the Folder and file I copied, I still can't see all the data that is currently stored on the drive...Is this a delete and re-copy scenario?
Thanks!

Convert music from USB-drive to iTunes on a new iMac

Hi, I just got a new iMac, and I used Windows before.
I have a lot of Music on a USB-drive and I want to know how to convert it to iTunes.
Should I just drag and drop it to iTunes? or should I create a folder on the mac, move the files to the folder and then drag it to iTunes (like Windows)
Thanks for the help!

Open the iTunes preferences and check to see whether it's set to copy files to the iTunes Media folder when they're added to the library. If so, just dragging it to iTunes is enough.
Note that the Mac OS X version of iTunes won't import unprotected WMA music.
(72563)

DNG cannot convert ORF from Olympus E 510

I have a Olympus E 510. My RAW files are ORF.dn G converter don't suppurt ORF or what do I do?
Leif

The DNG converter does convert ORF files from Olympus cameras. That camera has been supported for years. What makes you believe that you can't convert those files?

Cannot open files from USB external harddrive in XP

Used this same harddrive in previous iMac OSX10.4 / Windows XP computer and it worked perfectly. Also used in computer labs for Macs and Windows at school. Never any problems. Fresh new Macbook pro and XP PRO install and while in XP the drive is visible but you cannot open a file directly from the folders in windows explorer. You can however drag a file to the desktop and it will open it there. There is something in the file path which XP / bootcamp is not liking? Files open perfectly from my XP on my HP. Ideas?

Went into administrative/disk management and poked around. Just changed drive letters and all is OK. Thanks anyway.

HP Officejet 6000 E609n stops printing periodically on wireless network

I have a Dell laptop with 64 bit Windows 7 on our wireless network. I recently installed this printer on the network. It will print documents I send to it, and then suddenly subsequent documents pile up in the printer que and have "error" listed beside the document names. When I troubleshoot this problem from the printer window, it cannot resolve the problem. The blue wireless light is not on, and pushing that button does not turn it on; I can fix it, by unplugging the printer and plugging it back in, then the blue wireless light comes on, and it prints all the documents in the que, and will continue printing new docs sent over to it for a while, and then suddenly they pile up in the que, and it will no longer print until I unplug it. Could a firewall be the cause or what? I get no messages from the printer telling me that the document failed to print.

I have thesame problem with my c6180
I have to re download the driver. then it works fine foe a while and quits. i redown load the driver and again it works for a while.
if this keeps up i will never buu an HP again
Ted

Cannot convert podcast from aac to mp3 in iTunes

I've downloaded the Mac Format podcast (auto link into iTunes) which is in acc format and right clicked it to select convert to mp3 as I want to burn to a disk (don't have an iPod - yes I know I'm the only one!) The progress bar shows the conversion taking place however once it has completed the file is still in acc format. How do I actually get it into mp3?

madking wrote:
iTunes automatically turns both AAC and MP3 into a different file type when burning on a Cd,
Clarification... when burning an AUDIO CD. You can burn data and MP3 CDs in iTunes as well.
madking wrote:
known as AIFF files. These AIFF files are playable by 99% of cd players, so you don't have to convert anything.
No, to nitpick, they are not in AIFF format but instead they are in Compact Disc Digital Audio format, aka "Red Book". When you put a CD into a Mac, it just shows them as AIFF files but they aren't until you actually copy them to your computer.
Patrick
(now Chris CA should be along shortly to get on me for that last boring bit since I just gave him a hard time about the same sort of correction to one of my posts)

How can I convert a l7680 from USB to wireless

I have a L7680 setup to print via a USB connection. How can I change that to a wireless connection without un/reinstalling the whole program.
Thx
Dave
WinXP SP3 IE8 MDE all updates
This question was solved.
View Solution.

Hi,
Your printer has a NIC (wired) therefore you can add it to your home network thru a router which has LAN port(s) using CAT5 or CAT5e or CAT6 cable. Please use this book as a guide how to connect:
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Trying to change HP Photosmart 6510 printer from USB to wireless -

There is no statement to click on "Convert a USB connected printer to wireless" setting. Therefore I cannot switch the connection to wireless without this setting.

Hi
Try setting up the wireless by going to the link given below;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02894181&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Regards

Cannot print direct from Android using wireless direct

I can pring from my HTC ONE using the HP ePrint App.
However I cannot print using "Wireless Direct" mode.
I have set it up,
The printer appears on the wifi lists.
I connect to it
I select a doc, select print, I search for a printer and nothing.
Please help

I tried using the iPad and that works fine.
Tried using HTC One, no luck

Officejet 6000 e609n cannot convert to from USB to wireless

Similar Messages

Maybe you are looking for