Officejet 6000: Network Configuration Page prints over and over

When this printer runs low (NOT out!) of ink, it begins printing the "HP Network Configuration Page" over and over and over. Installing a new cartridge seems to solve the problem, but I'd rather empty the one that's in there before throwing it away in favor of a new one and wasting paper in the process. I'd appreciate some help.

Hello vancat,
You need to place the alignment page that is printed on the scanner glass and then press the Scan button. This will complete the alignment process.

Similar Messages

Why does my printer randomly cycle and print a network configuration page?

My HP Photosmart C4795 randomly cycles like it is cleaning the printer heads. Sometimes it is hours between this cycling. Sometimes it will print a network configuration page without being requested.
There are 3 computers connected wirelessly. Both run Windows 7. The wireless signal has a very good signal - the router is ~12 ft from the printer.

It could be a power issue. If the power fluctated the printer would restart which might cause it to do a dirty power print clean.
If you have a surge supressor I would try that.
Not sure why the network config page would print with a power surge, but another possibility is a friendly neighbor playing with you by sending printer clean reauests and network config print jobs. :-)
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

How can i print a network configuration page , i need the IP on a ph1510

how can i print a network configuration page , i need the IP on a ph1510

Hi,
What is the exact printer model?
If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Canon pixma mg5420 "printer not responding". I printed the "network configuration page" . 70% strng

I printed the "network configuration page". strength at 70%. how can I fix this?
thanks,

Hi Heltonc,
So that the Community can help you better, we will need to know what Computer Operating System you're using. (Windows XP/Vista/7/8 or Mac 10.x)
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!

HP Officejet 6000 Wireless - Does not print black correctly.

HP Officejet 6000 Wireless - Does not print black correctly.
Previously the printer was printing fine.
This evening I printed a diagram I made in MS PowerPoint. The diagram contained black and red text along with black, red, and blue lines. When I took the printed page from the printer, all the black items looked faded. Instead of black, they printed as a light, faded gray. The red and blue printed correctly.
Another user of the printer printed some documents around the same time. These documents had nothing but black text. Every page this user printed showed up completely blank. The black was not even faded. There were no signs of anything being printed on the pages at all.
It seemed strange that one print job would print faded black and the other printed nothing. Considering the possibility that the ink was low, a new black cartridge was placed into the printer. The exact same results occured. My diagram printed correctly except for the fact that the things that were supposed to be black were coming up as light gray. Once again, the documents printed by the other user came up completely blank.
I ran a print test on the printer. It printed a Windows logo with the word "Windows" below. The logo printed correctly. The text showed up as a light, faded gray.
A third user printed an Excel spreadsheet. The cell borders were printed as a light gray. Nothing else printed. Everything in the spreadsheet was supposed to be black.
The third user also printed a recipe from MS Word. Most of the text showed up as a light, faded gray. Some text did not show up at all. I could not see any correlation between what showed up in faded gray and what did not show up.
It seems to me that if something was wrong with the cartridges, it would either always be faded or not print at all. I can consistently get some things to print faded and other things to not print at all. Color always prints correctly.
The print jobs were sent to the printer wirelessly from three different computers. Two computers run Windows 7 (x64). The third computer runs Windows XP SP2.
As far as I can tell, nothing was changed or done differently between now and the last time something printed correctly.
Might this be a driver issue? Since the printing consistently prints one way for certain files and another way for other files, I don't see it as being caused by hardware. If it's not a software issue, what could possibly cause the effects I described above?

This article should help resolve your partial/blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Network Configuration Page

My HP Envy 5530 prints a Network Configuration Page every time I print anything via the network. How do I stop this? It's a big waste of ink, paper and $$

I dont have a PSC2210 but one of the documents I saw said to go to the front panel of the printer, press the Setup button, press 6 and then press 1 to print the Network Configuration page.
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

L7590- doesn't detect network/ empty network configuration page

Hi,
I baught a new L7590. Installed it according to the instruction + software. The printer was not detected during installation.
Network configuration page in the printer displays empty values- Network status: Offline, IP 0.0.0.0. etc.
I tried to setup an IP manually, but it doesn't help (and it seems that the printer doesn't save my manually entered IP).
Any ideas?
Thanks,
Dror.

Offline with all-zero IP means that you have a bad cable, or a bad connector on the printer, or a bad connector on the router, or any combination of these.
The netgear router should have indicators (usually on the front panel) that illuminates when a LAN connection is made. Check that first. Also, the printer has LED indicators on the LAN connector -- they need to be illuminated showing activity.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

HP OfficeJet j6480, Duplex (Two-sided) printing, adobe, and "default"

I've been through many of the duplex printing posts, and can't find an answer that works.
The system:
A MacBook Pro running 10.5.6 with the latest HP printer drivers (1.1.1 as per
http://support.apple.com/downloads/HPPrinter_Driver_1_11 )
A HP OfficeJet j6480 connected over the wireless network (or via USB, it doesn't
seem to matter).
The problem:
1. Duplex printing from MS Word only works if I click the "Two-Sided Printing"
option in the print dialog +every time+ I print: saving the print setup
configuration doesn't retain the two-sided setting. But at least duplex
printing works in Word -- if somewhat awkwardly.
2. In all programs with a print dialog box, the "two-sided printing" choice
selector in the [Layout] panel is greyed out.
3. In Acrobat Reader and in Firefox, two sided printing just doesn't work
at all. No matter what the settings.
I've tried the hpijs drivers as well -- the 3.9.2 version did no good at all.
(From http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs#More_Info .)
HP support was a little less than useless -- not only did they not solve
the problem, they made me late for dinner. sigh.

I've been through many of the duplex printing posts, and can't find an answer that works.
The system:
A MacBook Pro running 10.5.6 with the latest HP printer drivers (1.1.1 as per
http://support.apple.com/downloads/HPPrinter_Driver_1_11 )
A HP OfficeJet j6480 connected over the wireless network (or via USB, it doesn't
seem to matter).
The problem:
1. Duplex printing from MS Word only works if I click the "Two-Sided Printing"
option in the print dialog +every time+ I print: saving the print setup
configuration doesn't retain the two-sided setting. But at least duplex
printing works in Word -- if somewhat awkwardly.
2. In all programs with a print dialog box, the "two-sided printing" choice
selector in the [Layout] panel is greyed out.
3. In Acrobat Reader and in Firefox, two sided printing just doesn't work
at all. No matter what the settings.
I've tried the hpijs drivers as well -- the 3.9.2 version did no good at all.
(From http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs#More_Info .)
HP support was a little less than useless -- not only did they not solve
the problem, they made me late for dinner. sigh.

Officejet 6000 (E609n) won't print anything

I'm running Windows 7, SP1 and have my E609n hooked up via usb, with the wireless off.
My power button is flashing continuously, with no other lights coming on. Every 30 seconds or so it produces a sound that sounds like a single cycle of the roller. Print jobs spool, but the printer never changes state. If I lift the lid the print head moves over and the power light goes solid with the paper feed light soild. When I close the lid it goes back to just the power light flashing.
I've reset the printer with the unplug/hold power button method and reset the print spooler. When I power the printer back up it cycles normally and returns to power light flashing state when it's done booting. I've also tried uninstalling and reinstalling the printer from my system. No change.
It's out of warranty, so I'm curious if there's anything else I might be able to do. Thanks.

Hi @panicbot
I see your power button is flashing continuously, with no other lights on. Please use the following document to troubleshoot the issue; Blinking Lights on the HP Officejet 6000 (E609a) and 6000 Wireless (E609n) Printers.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Why does my first page print great and all of the rest are the wrong orientation?

When I am viewing my PDFs in Adobe Reader, they look great. When I print them, the first page is correct and all of the rest are the wrong orientation.
Please help!

Hi there ashp,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Officejet 6700 connected to network according to network configuration page and network test results

Office Jet 6700 connected to network according to wireless network test results but I get an unable to connect error when trying to set up web tools or connect to get updates. I have an Actiontec Router with century link DSL. I have tried both manual IP configuration and DHCP configuration. I can print wirelessly from my iphone and can access the web service page on the printer but the printer will not connect outside the network. I do not have a proxy.

Never mind. I found the answer... I set the dns servers to 8.8.8.8 and 8.8.4.4 ( google's dns servers ). Sort of strange that I set the dns servers manually to the ones recommended on my router and it didn't work but when I set them to google's it works...? Spent many hours researching this til I found the answer. Silly printer and silly instrucutions tha never mentioned overriding the dns servers if you couldn't connect.

HP OfficeJet Pro K5400 no longer prints Cyan and Yellow all of a sudden. Please help..

Officejet Pro K5400 Cyan and Yellow just stopped working at the same time (very strange). I've read almost every post and tried almost everything including the diagnostic tests that show that everything is fine (via printer buttons), cleaning test and every other test available in the HP manual many times. The diagnostic test shows no problems and cartridges all brand new and full to max. However the diagnostic print only shows the Black and Magenta, but no Cyan, Yellow or any other color. I pulled out the print heads, cleaned connectors, soaked heads and everything else you can imagine and no luck. I must have pulled the power out and "hard reset" it over a dozen times. I can't imagine that both print heads (cyan on one, yellow on the other) just decided to die at the same time. I cant be driver/software related because I did the tests directly from the printer. The only thing I can think of is maybe cyan and yellow dried out when I took out the cartridges to take to staples with me for reference. All cartridges were out of the printer for 2 weeks or so. Any thoughts?
This question was solved.
View Solution.

I am glad your issue is resolved. Happy printing!
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

All settings seem fine but Officejet 8600 pro won't print over wifi

Hi
This is my second post concerning this problem. I thought I'd solved it but apparently not.
The printer shows that it is connected to the network (fixed ip address) and stays connected
I can access the printer's homepage and settings from my browser.
I've checked all router settings as per HPs wireless printing website (MAC filtering off/802.11g/2.4Ghz, channel 6) and they are good
I'm using WPA/WPA2 with AES encryption
All looks fine except when I go to print something I'm told "printer not connected" in the print dialogue. Occasionally if I run the Wireless printer setup wizard from the Printer's homepage it will print but then seems to lose the seetings after a while.
Have tried restarting all devices to no avail.
The only thing I can't explain is that when I look at my router's connected devices the printer (and its IP address) is not there, even though I can communicate with it through my computer and its showing as connected on the display.
Someone please help, this is driving me mad. It should be SO simple but it just isn't.
OfficeJet Pro 8600
MacBook Pro running OS10.7.4
Router: D-Link DSL-2640 R (firmware up to date)
THANKS!
Chris

Hi Chris,
I assume it was disabled by your details?
Please let me know of any progress after verifying for several days.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why is the first page printed fine and subsequent pages are huge type with missed information?

When printing from a website the first page that gets printed is normal: regular size print and it fits on the page. All subsequent pages are large print do not fit on the page and information is missing between printed pages.
This is a recent problem..maybe two-three weeks?

See my answers below:
a) The size of the pages of PDF which you are printing. LETTER
b) Does all pages of the PDF are of same size? YES
c) What is the page size set in the Printer and what is the actual size of the paper which you have put in the tray? LETTER
d) Does this problem also happens on the virtual printer which you might have on your system (Try either Microsoft MPS Document writer or Adobe PDF Printer) No VIRTUAL PRINTERS
Thank you for attempting to help me with this... we have tried everything and haven't been able to resolve the problem.
Sherri

An extra page prints before and after a page with the data, why?

If I go to www.allrecipes.com, select a recipe and click on the Print button, FF prints an extra blank page before and after the recipe. The recipe is short and easily fits on a single page. I've changed all the print settings so that even the Header & Footer info is set to "Blank".

I don't understand why blank pages are generated, but I can help you with a quick hack if you like. This will strip off everything but the actual recipe area so that you can streamline the printout.
After you load the page and select your options:
* Open Firefox web console using Ctrl+Shift+k
* Next to the caret (>) paste the following script then press Enter to run it:
var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]);
* Close the web console by pressing Ctrl+Shift+k again
When you preview the page, it should look ready for printing. Any luck?
Obviously that's not very convenient if you print a lot of recipes from this site, so you could save the script as a bookmarklet. Here's how:
First, copy this slightly modified script (select, Ctrl+c):
javascript: var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]); void 0;
Next, if you are not displaying the Bookmarks Toolbar, you can display it using either:
* right-click a blank area of the tab bar > Bookmarks Toolbar
* tap the Alt key > View menu > Toolbars > Bookmarks Toolbar
Right-click on the Bookmarks Toolbar and choose New Bookmark.
Paste the code into the Location box (the second box).
Then type a useful name in the Name box (e.g., AllRecipes) and click Add.
Now, when you want to hack the page, click the button to run the script.

Officejet 6000: Network Configuration Page prints over and over

Similar Messages

Maybe you are looking for