Officejet 6600 question

why is my new officejet 6600 pushing out a blank sheet of paper between each printed page?

Hi,
Could be something to do with logical page and physical page. This is happeining for all applications or for only one or two ? This is the first time or always ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HP OfficeJet 6600 H711g HP Solution Center software for Windows 8.1

I have an HP Officejet 6600 H711g printer. No installatin discs were included with the printer. I downloaded the installation files from the HP website. However, apparantely the HP Solution Center software was not included in the installation files. The HP Solution Center shortcut is located on my desktop but when I access it i get a message that my instalation is not complete. I have tried downloading and installing again (without uninstalling current files) but the Solution Center is still not available. Can somone please help. I'm not sure where to go from here.
Thank you
This question was solved.
View Solution.

Hi,
The HP Solution Center is not a part of the software for the HP Officejet 6600, it is a part of your previous HP printer's software.
From the windows 8 screen type HP and open the HP Officejet 6600 software, the HP Printer Assistant which is the software for your current printer will launch.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Re: How do I do a reset on a Officejet 6600 e-All-in-One C155A

I can not use the touch screen as it allways says, missing or failed print head with the setup catriages in, and it wont recognize new catriages.
This question was solved.
View Solution.

Hello @bk85,
Welcome to the HP Support Forums!
I understand that you're getting the message 'Missing or Failed Printhead' on the front panel of your HP Officejet 6600 e-All-in-One Printer. I would like to offer my assistance today with resolving this error message. Now, you indicate in your post that you are getting this error message while using the Setup Cartridges in your printer. If your printer has never been used before you must use Setup Cartridges to initialise the Printhead system within your printer. However, if you have used the HP Officejet 6600 in the past with the Setup Cartridges, than you can use new cartridges without issue in your machine. In saying that, the Printhead message that you're getting refers to the part that the cartridges fit into. The Printhead 'reads' the cartridges and put ink on the page. If the Printhead is defective within your printer, new cartridges will not resolve this issue. Rather, a whole unit replacement may be needed as the Printhead is a non-replaceable part within your printer.
Can I please have you click here to access the troubleshooting step designed to resolve this error message. Should the error persist after performing the reset than a replacement printer would be needed. If you require a replacement I would strongly recommend contacting our Technical Support queue by phone to explore additional hardware options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
Please let me know if the reset resolves the Printhead error you're receiving. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Trying to print, PC says it will send a fax Officejet 6600

My HP Officejet 6600, which I had to reinstall due to a connexion problem, calles itself now FAX HP Officejet 6600 in the PC.
No way to have it printing. My PC is a HP Pavilion h8-1030be. It keeps asking a fax number.
Any idea how to configure the printer in the PC, so as to have it printing when I want it to de that.
Anyway, I'll try now to restart the PC, and see what happens.
Best regards,
This question was solved.
View Solution.

Hey,
Thanks for the update on your printing issue. I am glad to hear that it fixed your issue and you are able to print as intended at this point.
I wish you the best of luck in all your future printing needs. Happy Printing!
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Scan HP OfficeJet 6600 in Win7 in MacBook Pro Boot Camp

I initially installed my OfficeJet 6600 on my MacBook Pro, but my MBP has a Boot Camp partition where I run Windows 7. I usually print and scan from the Mac side. I can print with no problem when working in Windows, so I never gave any thought to scanning. Today I hit a snag when I tried to scan a document while working in Windows. I started at the printer/scanner and chose "Scan to Computer." The only machine that appeared was my MBP. Do I need to so something special to get Scan to Computer to work with my Win7 partition?

Hi Caesar3,
Welcome to the HP Forums.
I see that you are having some scanning issues.
I suggest that we start off by running the HP Print and Scan Doctor and see if it finds any issues.
Write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Idle printing message when printing wirelessly from a Mac - HP Officejet 6600

I am having an issue with my HP Officejet 6600. When I try to print from my Macbook Pro I keep getting an idle message on the print screen. It is showing that it is connected, but will not print. In addtion I have been able to wireless scan to my computer from the printer and test print from the utilities window on my Mac. This problem is baffling because it was able to print last week and now can't. Also the printer will print wirelessly from my PC, but not the Mac. Please help.
This question was solved.
View Solution.

Let's set a static IP address and external DNS for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

IPad vs. Officejet 6600 setup

At the risk of asking a 'not good' question, we have iPad 4's only (iOS6.1.3), no desktop or laptop. Can I setup my Officejet 6600 printer with it (dsl wi-fi only)?
This question was solved.
View Solution.

Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix/setup:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
iPhone: http://www.apple.com/support/iphone/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Supprimer un moteur de recherche Internet installé avec une mise à jour officejet 6600

Le 06 septembre 2012, une mise à jour automatique a été réalisée par HP pour mon imprimante officejet 6600. Le moteur de recherche AVG secure search a été installé en même temps. Je le refuse mais je ne parviens pas à m'en débarrasser. J'ai téléphoné à AVG France. Il existe une marche à suivre sur leur forum mais malgré une stricte application de la procédure d'enlèvement, le mal persiste. Merci de me dire comment faire pour enlever cette incongruité de mon ordinateur (windows 7 64 bits, explorer 9) qui constitue une atteinte à ma vie privée.

Je m'excuse, mais cela semble être un problème AVG et non un problème d'imprimante. Vous devrez communiquer avec AVG pour le soutien.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Get HP Officejet 6600 printer to scan to my computer

I need to get my HP Officejet 6600 printer to scan a docment to my HP Pavilion 23 computer.

Hi @kennyboundsmsn , and welcome to the HP Forums!
I see you're looking to scan. I would like to help!
Before we start, I have a few questions:
What happens when you try to scan?
Do you receive any errors?
Are you able to make a copy?
Are you connected wireless or USB?
In the meantime, I'd recommend this document:
Scan from Windows 8 With the Full Feature HP Software for HP Multifunction Printers
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet 6600 & Yosemite compatibility

Are Officejet 6600 printer and Yosemite fully compatible? When I upgraded my MBP to Mavericks, I lost some functionality with my old 5600. I'm thinking of buying a new MBP and not sure if I want Mavericks or Yosemite. Now I have the 6600 and I don't want to lose functionality again.
This question was solved.
View Solution.

Hi,
The printer is fully compatible with Yosemite.
Add the printer to your Mac within Printers & Scanners, the latest drivers will be installed from Apple servers.
Next install the HP Easy Scan and you will be provided with full functionality such as OCR, Front Panel scanning, etc.
The HP Easy Scan app can be installed from the following link:
https://itunes.apple.com/us/app/hp-easy-scan/id967004861?mt=12
Regrds,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Airprint to officejet 6600 from apple devices with ios 8.2

Hi -- I've noticed once I upgraded my iphone and ipad to ios 8.2, I can no longer air print from these devices to my officejet 6600. The screen comes up on the deivces, but when I choose the printer, it never connects. Is there a way to allow printing from these devices?
This question was solved.
View Solution.

Hello @1mazin,
Welcome to the HP forums.
I understand that you are having a problem sending print jobs via Airprint, since upgrading to iOS 8.2.
I would like to help.
The first thing I would try is simple.
Turn off the printer and the iOS devices.
Unplug the power to your router for about a minute.
Plug the power back into the router.
Turn the printer and devices back on.
Also, have you tried the HP ePrint app?
Getting Started with HP ePrint Mobile Apps
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Officejet 6600 duplex option

I have an HP Officejet 6600 that i use in my office and i would like to do duplex printing. I am wondering if there is an HP duplexer i can buy and if so what is the model number? If not, does anyone know how to do double sided printing manually?

Hey @ildegardo ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I understand you are not getting scanner functionality from your HP Officejet 6600. You have used the CD given to you in the box to install it. It doesn't matter which way you try to scan, from you computer or from your printer, it just will not work.
Before I delve into the troubleshooting there are few things I would to clarify.
The software did successfully download? Correct?
Have you tried an uninstall and reinstall? If so did you use the drivers available online at hp.com?
Is the blue light on your HP Printer blinking or solid?
Do you have issues with any other devices on that network not being able to communicate?
Please answer ALL above questions, I look forward to getting this fixed for you.
I worked for HP.

Officejet 6600 switches itself off

Our OfficeJet 6600 has been switching itself off intermittantly. When I unpluged the power cord and repluged it in, the printer went through its startup sequence, at the end of which it abruptly shut down again.
Through trial & error, I found I could get the printer to stay on for longer by unplugging the power cord from the power supply module and then reseating the plug.
Is my power supply module going bad or is there something happing inside the printer?
This question was solved.
View Solution.

Hi @figure2 ,
I see that you are having power issues with the printer. I would be happy to help you.
Most likely the issue lies with the power supply module. Try another port to see if you have the same results.
Please try the steps in these documents to see if it will help resolve this issue.
HP Printers - The HP Printer Does Not Turn On or Respond When the Power Button is Pressed.
Please disregard the title.
HP Officejet 6600 and 6700, and Officejet Pro 8600 All-in-One Printer Series - The Printer Turns Off...
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Officejet 6600 - Cannot Print from any application since Vista Update on 10/15/14

Our wireless connected printer had been working fine. On 10/15/14, updates from MS were installed. After that, we can generate test pages from HP Printer Assistant but no other application prints. That includes all MS Office projects, notepad, and any web browser.
We've run the HP Print Doctor and it indicated that there are no problems. We have since attempted to restore to the last checkpoint before the install and the restore fails.
Has anyone else run into this problem?

Hey @KPL12345 ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand that you are experiencing no response from your printer after upgrading to Windows Vista.
Try uninstalling the software using this document >>Uninstalling the Printer Software
Installing the software using this document >>Setting Up the Printer for a Wireless or Wired Network for the HP Officejet 6600 e-All-in-One and 67...
After you have done that, try to print. If you can not print then run the Print and Scan Doctor again.
Hope this helps, let me know.
I worked for HP.

How do we register our new HP Officejet 6600

now what ? I asked a question why am I being asked for the answer.

The following document guides you through the process of setting up and registering your Officejet 6600 e-All-in-One printer with ePrint:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02908385&cc=us&dlc=en&lang=en&lc=en&product=530...=
I work for HP.

Officejet 6600 question

Similar Messages

Maybe you are looking for