Officejet 6600 Scan alignment off

OfficeJet 6600 to windows 7
I recently bought this printer and my first scan to my computer the page was off center. Is there any way to align the scanner? Older models this could be done by scanning the alignment page that was printed out by the printer.

Hello there! Welcome to the forums @Skiier88
You can also align the printhead on your Officejet 6600, which may help the scanning alignment issue.
Selet Setup, Tools, Align Printhead
Try a scan to see if that helped any.
If there is still an issue, also try making a standard copy and let me know the results!
Happy Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Officejet 6600 switches itself off

Our OfficeJet 6600 has been switching itself off intermittantly. When I unpluged the power cord and repluged it in, the printer went through its startup sequence, at the end of which it abruptly shut down again.
Through trial & error, I found I could get the printer to stay on for longer by unplugging the power cord from the power supply module and then reseating the plug.
Is my power supply module going bad or is there something happing inside the printer?
This question was solved.
View Solution.

Hi @figure2 ,
I see that you are having power issues with the printer. I would be happy to help you.
Most likely the issue lies with the power supply module. Try another port to see if you have the same results.
Please try the steps in these documents to see if it will help resolve this issue.
HP Printers - The HP Printer Does Not Turn On or Respond When the Power Button is Pressed.
Please disregard the title.
HP Officejet 6600 and 6700, and Officejet Pro 8600 All-in-One Printer Series - The Printer Turns Off...
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Incomplete scan from my HP Officejet 6600

My HP Officejet 6600 scans part of the document by leaves out lines in the middle in the saved form. It shows it complete when verifying the view.

Hello stillwater,
Welcome to the HP Support Forums!
I would like to see if I can help get the 6600 saving the full image when scanning. Which Operating System do you have installed on the computer you are scanning with?
Mac, including version, e.g. 10.8 or Windows, including version, e.g. Windows 7?
Also, how is the printer connected, USB or Wireless?
Hope to hear back!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Scan HP OfficeJet 6600 in Win7 in MacBook Pro Boot Camp

I initially installed my OfficeJet 6600 on my MacBook Pro, but my MBP has a Boot Camp partition where I run Windows 7. I usually print and scan from the Mac side. I can print with no problem when working in Windows, so I never gave any thought to scanning. Today I hit a snag when I tried to scan a document while working in Windows. I started at the printer/scanner and chose "Scan to Computer." The only machine that appeared was my MBP. Do I need to so something special to get Scan to Computer to work with my Win7 partition?

Hi Caesar3,
Welcome to the HP Forums.
I see that you are having some scanning issues.
I suggest that we start off by running the HP Print and Scan Doctor and see if it finds any issues.
Write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

New HP Officejet 6600 won't scan to MacBook Air

I bought new HP 6600, downloaded all the drivers set it up and it worked perfectly - for one week. I've now uninstalled and reinstalled drivers. My MacBook Air sees the printer and I watch it scan and see the text on my computer screen, but not saved in folder or in my Finder window?
Thanks to anyone who can help. My first time ever on this site.
David

Hello @dbvancouver and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP Officejet 6600 e-All-in-One Printer - H711a/H711g Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Paper Jam and Scanning issues for the HP Officejet 6600

Had to warranty my printer for same issue and refurbished one is worse.

Hi @Uguessedit,
Welcome to the HP Forums!
I am sorry to hear that your HP Officejet 6600 refurbished printer is worse than your previous printer, but I am happy to help!
For further assistance, I will need some additional information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies. Copying a Multipage Original in Order (Collating).
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
What type of scanning issues are you having? Are you getting any errors?
In the meantime, please see this guide, A 'Paper Jam' Error Displays on the HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Pri....
Thank you for posting, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My HP OfficeJet 6600 won't scan and email. It used to do it

Explain how to get my HP OfficeJet 6600 to scan & email. I keep getting error messaage that the device is not attached. But it used to scan & email fine prior. All of a sudden it stopped working.

Make sure you have the full driver installed to get the scan features, then check the instructions on how to use the scan to email.. i dont know which operating sys. you have so you will have to choose your own path here
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=33646&tmp_task=useCategory&cc=us&dlc...

HP OfficeJet 6600 won't scan to my Mac Mini

HP OfficeJet 6600 won't scan to my Mac Mini

Scan from your Mac using Image Capture in your Applications folder. What version of OS X?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet 6600 won't scan

I haHP Officejet 6600 that won't scan. It keeps saying computer not found. But it prints good.
Thanks

Hello jhparris1, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet 6600 and Outlook 2007 unable to send scan to email

Hi,
I am unable to scan (HP Officejet 6600) from my comuter to Outlook 2007. I used to scan whatever I am scanning for the day from my HP Officejet 6600, and then I would see my scan finished then I would hit email scan. I would then recieve multiple errors.
Here is the process; HP Scan (save) and then I get an error: The HP Scan application is unable to open your application and/or cannot attach the scan to a new email. Please check you email configuration and try again. I then select (Next) I select "OK," which then provides me with another error: This action is not supported while an older version of Outlook is running.
Therefore, can somebody help me?
Thank you,
Joe Martinez

Hi Joe,
First, try reinstalling the latest HP software.
From Programs and Features uninstall the HP Officejet 6600 Basic Device Software, next dowload and install the latest software below, then check for any difference:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108845-4&cc=us&dlc=en&lc=en...
If the issue remain ensure that Outlook is set as the default program.
From the Control Panel select Programs, then Default Programs.
Select Outlook 2007 from the left pane, ensure it shown as "Outlook have all its defaults", otherwise click the button to set all the defautls for outlook and check again.
If there is still no change I suggest trying the Hotfix for outlook below, be sure to follow the entire Resolution Section:
https://support.microsoft.com/en-us/kb/813745
If there is still no change I recommend repairing Office / Outlook and check if that may help, otherwise you may need to Reinstall the software.
You may follow the steps to repair Outlook 2007 below:
http://www.companionlink.com/support/kb/Repair/Re-install_Outlook_2003,_2007,_2010
Hope that may help getting the issue resolved,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can I use the OCR of the Officejet 6600 on pdf files without printing and scanning them?

Product name: HP Officejet 6600 All in one
Operating System: Windows 7 64-bit
After scanning hundreds of pages to pdf format with the printer, I have realized that using the OCR scanning feature would have served my purposes better. (I don't have the originals). I would like to run the OCR on those scanned pdf files. Technically I could just print and rescan them all with the OCR feature, but that would be a huge waste of ink, paper and time. Can I run the built in OCR on pdf fles?

Hello there! Welcome to the forums @tahilaci ,
I read your post and wanted to stop in and reply to you! I am really unsure if there is conversion software somewhere out there, but if there is, you may be able to convert the files, if not, you will have to re-scan the documents. You might be able to highlight the PDF text and paste it into a Word document, otherwise, there's no alternative.
Best of luck to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Get HP Officejet 6600 printer to scan to my computer

I need to get my HP Officejet 6600 printer to scan a docment to my HP Pavilion 23 computer.

Hi @kennyboundsmsn , and welcome to the HP Forums!
I see you're looking to scan. I would like to help!
Before we start, I have a few questions:
What happens when you try to scan?
Do you receive any errors?
Are you able to make a copy?
Are you connected wireless or USB?
In the meantime, I'd recommend this document:
Scan from Windows 8 With the Full Feature HP Software for HP Multifunction Printers
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet 6600 produces blank pdf scans

I have a officejet 6600 all in one printer.I have had no troubles until today.I regularly use the device to scan and produce a pdf of my scan. Today the pdf files of the scan are showing only blank pages even though the image on my pc in the HP scan tool shows the correct image of the scan. So, the PDF file generation is producing blank files. All help is appreciated.

Hi Keith! I'd start by running the following two uninstall processes: Fix problems that programs cannot be installed or uninstalled Uninstalling the Printer Software Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows. Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows. Please let me know how it goes!

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Officejet 6600 All But One Laptop Can Connect To Wireless Network Printer

One windows and 2 macs can connect to the wireless printer over the newtwork just fine but one (Windows 7) will not. HP Print and Scan Doctor can discover the printer from that laptop as "visible" but repeatedly says " need to install full software" which I've done, and after, it runs install wizzard reports, the IP address I've entered is wrong, which it's not. Firewalls are off. I've un and re installed, tried windows add device which can't connect either. I've had this problem before with this laptop but just can't remember how I fixed it. I remember getting to a screen that offered the option of installing over a nework or wireless directly to the printer and over the network fixed it, but I can't remember how I got there. Any ideas as I'm at wits end. Thanks

Welcome to the forums @Davidchicago ,
I read through your post about the installation troubles you are having with one of your Windows 7 computers and your Officejet 6600. I am here to let you know what my suggestion is for you!
There could be a program blocking the installation and causing the problem. I'd recommend a Clean Boot, restarting your PC, disabling your firewall and running through the installation again.
Hopefully that will get you through the install. Let me know the results!
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet 6600 Scan alignment off

Similar Messages

Maybe you are looking for