Officejet 6700 [511DE1] on Mac Yosemite

Fax doesn' t work with "Yosemitie" and the HP update is labelled as being for Maverick: please advise. 

Hi,
Please use the following instructions to fix:
   http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04473034&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Officejet Pro L7590 and Mac Yosemite 10.10 printing software

    I just upgraded my Mac to a mew 2014 MacBook Pro with Retina and Yosemite 10.10.1.
    I want to install my old HP Officejet Pro L7590. I have the printer connected by network cable to my Comcast network hub. There is a stable connection on both ends (lights are on). What software do I download to install the printer? Is it not available for Yosemite yet? Where is it located? I'm assuming its not available for Yosemite yet? I don't have the original software. Thanks.
    This question was solved.
    View Solution.

    Hi @rustyblue,
    Welcome to the HP Forums!
    Currently there are no full feature software and drivers directly through HP for Mac OS X 10.10 for this particular printer model. However, after some searching I found this driver directly through Apple. HP Printer Drivers v3.0 for OS X.
    If you need help with scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005. Even though this post is for Mac OS X 10.9.3 and a different printer, these steps will work for your printer on 10.10 as well.
    Hope this helps you get up and running, please let me know if you have any further issues!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Problem in printing from Officejet 6700 in Mac

    Hello all.
    I have an HP Officejet 6700 for more than a year. It is connected to a wireless network (Netgesr wireless router), both Mac an Windows PC printing and scanning successfully until yesterday…
    Since yesterday the Mac cannot print or scan, while windows machine still works fine …
    Mac OS version is 10.9.4
    I changes the printer from DHCP to static IP, I deleted the printer from the Mac and installed it again from the HP site but at the HP Utility I get stuck in the Add Officejet 6700 (08B0D2) Bonjour Multifunction with an “Unable to communicate with the printer at this time” error message.
    Again all of this while windows machines communicate and work perfectly fine.
    Any idea?

    Hi @AmitFish 
    I see that you can still use the Windows PCs to communicate to the printer, but not the Mac. I suggest using the following document to troubleshoot the issue, as this applies to the Mac operating systems; 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Mac OS X.
    Please let me know if this resolves the issue, or if you require further assistance. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Officejet 6700 margin problems printing from Mac

    I recently purchased and setup a  new HP 6700 all in one wireless printer and have a problem that I can't seem to solve or find a solution for.  Printing from my Mac's leaves margins cutting the top and bottom off of documents.  I've printed the same documents from a PC at work without problem but opening and printing on this printer seems to cut off margins.  I can't find a margin setting to adjust nor should I need to with a default print setting.  I've updated the latest HP print drivers and firmware with no luck.
    Thanks in advance.

    I just found this post and hope I am not too late to pursue this further.
    I have an HP OfficeJet 6700 Premium Wireless Color e-All-In-One Inkjet Printer.  My operating system is Macintosh OS X 10.9.3 Mavericks.
    I have been having this problem for quite sometime and would love to get an explanation, or directions to fix the problem.
    I clicked on the link 'HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Printer Series (H711) Product Specifica...' and saw that the acceptable Top and Bottom print margins for a Mac are .13" and .47" respectively.
    Whether I am in Microsoft Word for Mac 2011 (latest version) or in Preview (latest version), I cannot print a document with a Top margin of less than .5".
    I created some documents in 2013 that were printed on this printer and they came out with no problems.  
    In January of this year, I bought my current Mac, and now I cannot print any of those documents unless I increase the Top margin to '5".  Thinking it might be the HP driver, I downloaded and upgraded to the latest version of the driver, and still the problem persists.  
    I originally was blaming the problem on Microsoft Word, but that does not make sense since the problem also occurs with Preview.
    Your help would be appreciated.

  • My Mac stoped printing. I am on ox 10.9 and I have a HP Officejet 6700 premium

    My Mac stoped printing. I am on ox 10.9 and I have a HP Officejet 6700 premium. I've reinstalled the drivers and tried several time . . . It just keeps telling me that the printer is busy.
    I also have a PC hocked up to the network and it prints fine.
    There is nothing wrong with my mac either because I have a dymo printer hocked up and it prints fine . . . 
    What gives?

    Hi HappyHarpo, 
    Thanks for your post and welcome to the HP Forum.
    At first step I suggest to restart your Mac and printer. If printer is in a network, also reboot the router first. Then try printing again. 
    If it still fails, I suggest to reset the printing system. Open Printers & Scanners and right-click the left side with the listed printer then choose Reset Printing System. 
    Then add the printer again, make sure next to "Use" the HP Printer/driver is selected correctly, and test printing. 
    Best regards,
    Mandy
    Say "Thanks" by clicking the Thumb up in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    Although I work for HP my posts and replies are my own

  • Mac can not connect to OfficeJet 6700 while windows machine can ...

    Hello all.
    I have an HP Officejet 6700 for more than a year. It is connected to a wireless network (Netgesr wireless router), both Mac an Windows PC printing and scanning successfully until yesterday…
    Since yesterday the Mac cannot print or scan, while windows machine still works fine …
    Mac OS version is 10.9.4
    I changes the printer from DHCP to static IP, I deleted the printer from the Mac and installed it again from the HP site but at the HP Utility I get stuck in the Add Officejet 6700 (08B0D2) Bonjour Multifunction with an “Unable to communicate with the printer at this time” error message.
    Again all of this while windows machines communicate and work perfectly fine.
    Any idea?

    Hi @AmitFish,
    Welcome to the HP Support Forums! I see you are not able to connect your HP Officejet 6700 Premium to your Mac, everything was working fine and all of a sudden you get a communication error.
    I would first like you to make sure you have installed all Mac updates, please run the updates and let me know if this helped?
    If not, please complete the steps listed here: Printer Does Not Maintain Wireless Connection, I know you have previously set a Static IP, please continue and let me know the outcome.
    I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP officejet 6700 won't print on my Mac 0S X 10.7.5

    Sorry, I know this question has been posed already, but all the solutions don't seem to work. 
    When I try to print, it'll sometimes say, "connecting to printer" then it says, "connected to printer" and then "printing" but nothing prints.  Or sometimes it just doesn't seem to print at all.
    I've installed the latest driver.  I've deleted all the printers in my settings, then add it back in.  Still no luck.
    Suggestions?
    This question was solved.
    View Solution.

    Hi @MDSSD,
    Welcome to the HP Support Forums! I see sometimes when you try to print to your HP Officejet 6700 Premium you get a "connecting to printer" then says, "connected to printer" and then "printing" but nothing prints. 
    I would like you to start with the steps listed below:
    Scrub/ Uninstall
    • Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
    • Click continue, click on one of the printers in the list.
    • * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
    • Click uninstall.
    Reset Printing System
    1. Click the Apple icon (   ), and then click System Preferences.
    2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    3. Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    4. Click OK to confirm the reset.
    5. Type the correct Name and Password.
    6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
    Repair Disk Permissions
    1.On the Dock, click Applications, and then click Utilities.
    2.Double-click Disk Utility.
    3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    4.Click the Repair Disk Permissions button at the bottom of the window.
    5.Once the repair is complete, restart the computer.
    Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
    HP Officejet Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
    I hope this helps, please let me know the outcome!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Unable to scan to mac desktop officejet 6700

    Anyone available to help me be able to scan to my Mac desktop computer?  I am trying to get my Officejet 6700 to scan directly so that I don't have to use a memory device each time. Thanks.

    Hello Isabelle11, and thanks for the response!
    First thing I would recommend would be downloading and running this Critical Update to fix Scan to Computer issue on Mac OS X v10.7.
    I would recommend following the steps in the following document on Mac OS X v10.7 Lion: An 'HP Utility quit unexpectedly' Error Message Displays on the Computer.
    I would also suggest utilizing this document on Mac OS X: Scanning Software Does Not Open or Stops Responding.
    For further information on scanning using Mac OS X 10.7, I would refer to this document on How to Scan: OS X v10.7.
    Please let me know how the troubleshooting using all the above documents go!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Wireless printing problems from Mac to my new Officejet 6700

    I have just purchased the Officejet 6700 for my office.  We have 7 mac laptops and one HP.  Currently the only printer that can printer wirelessly to the 6700 is the PC.  The first day I had the printer I was able to get my MacBook Air to print wirelessly, but since then it says it can't find the printer.  That is the same message all the other Macs are getting. 
    Any advice??

    Hi,
    I would rather suspect Multicasting lack of support or wrong configutation within your router, this will explain that behavior as Apple computers, unlike Windows, dicsover the device using Bonjour which relies on Multicasting.
    Please let me know your router brand and model in order to better understand the model.
    Additionally did you used a different multifunction device over the network prior the 6700?
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • OfficeJet 6700 doesn't work since yosemite update

    Since I have installed Yosemite in my imac 27 late 2013, I have a lot of problems to print in a hp officejet 6700 printer connected via wlan Time Capsule. I am able to see the printer, but when I try to print the system is not able to find the printer. I have all update, less the printer driver from hp, but they say that last driver should work with mavericks and yosemite.
    The printer was working properly with mavericks and I did not make any change in the wlan.
    Thanks for comments,
    Bets regards!

    Since I have installed Yosemite in my imac 27 late 2013, I have a lot of problems to print in a hp officejet 6700 printer connected via wlan Time Capsule. I am able to see the printer, but when I try to print the system is not able to find the printer. I have all update, less the printer driver from hp, but they say that last driver should work with mavericks and yosemite.
    The printer was working properly with mavericks and I did not make any change in the wlan.
    Thanks for comments,
    Bets regards!

  • OS X 10.10 for Officejet 6700 Premium?

    Is an OSX 10.10 (Yosemite) driver available yet for the HP Officejet 6700 Premium? 
    This question was solved.
    View Solution.

    Assuming you are using a network connection, try unplugging your router for 30 seconds and plug it back.
    Next restart your Mac and turn the printer Off and On again, then check for any difference.
    If that doesn't help, try resetting the printing system and check again:
    *Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
    Click the Apple menu, and then click System Preferences .
    Select Printers & Scanners.
    Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
    Click OK to confirm the reset.
    Type your user Name and Password .
    Click OK . The printing system resets.
    Now click the plus sign and try adding the printer.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet 6700 Help.

    How can I get my HP Officejet 6700 back into my Mac. I download new operating system  OSX Yosemite. The CD I have is not  compatible. 

    Hello @georgesxk , welcome to the forums!
    The driver I linked above, and the same driver you tried downloading is the driver for both Mavericks and Yosemite. There are no other drivers.
    If the driver does not work, you could try these steps to see if they will help and then try the driver again.
    Mac OS X: How to reset the printing system
    Repair disk permissions
    Restart the Mac
    Download the driver and install the printer
    In addition, download this driver: HP Printer Drivers v3.0 for OS X
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Scanner not working hp officejet 6700

    I have an Officejet 6700 Premium Printer..   When I hit scan to computer, it says no computer found.   I connected the printer to the computer with a USB cable and hit scan but window says waiting for scanner..   Printer works wirelessly w/ computer but is sporadic and sometimes have to restart printer to get it to connect wirelessly to computer..   tried to download software from hp but cant open the dmg file in my download file.   Error message says Officejet series 6700 image not recognized.

    Hello ramblindan,
    Welcome to the HP Forums.
    I see that you are having an issue with scanning to the computer.
    I also see that you had the printer connected on a wireless network and then attempted to scan over USB.  When the connection is changed from wireless to USB without adjusting the software, this can cause communication issues.
    I have a few steps that we can run through to troubleshoot the issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I also suggest that we remove the usb cable from the printer and the computer and leave it off.
    Please click on the following link that troubleshoots when the Printer Does Not Maintain Wireless Connection.
    If this does not resolve the issue, please respond with which Operating System you are running.
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Apple devices will not print to Officejet 6700 including MacBook Pro and iPad

    I am trying to help someone set up their MacBook Pro and iPad to be able to wirelessly print to their Officejet 6700. I recently set them up with a new Apple Airport Extreme for their router. The printer connects fine to the wireless network. Everything during the install process for the printer goes well, the MacBook easily sees the printer. The correct driver is installed. They also have a Windows 7 laptop that prints instanteously and has no issues whatsoever. 
    When I try to print from the Mac, nothing prints. I open the print queue and it shows "Printing - connected to printer..." and nothing ever comes of it. When trying to print from the iPad, it can see the printer and I select it. However, after telling it to print, the dialogue box just says "Connecting to Printer" and it never does - it just times out. 
    Things I've tried:
    Everything in this article that is related to Macs (10.8). 
    Resetting the printing system on the Mac.
    Resetting the printer to default settings.
    Setting the static IP of the printer through the printer settings.
    Setting the IP of the printer through the Airport Utility (after changing the printer to automatic).
    Rebooting the Mac after each attempt to remove the printer and before adding again. 
    Using the official HP Officejet 6700 driver.
    Using the Airprint driver.
    Other info:
    I can successfully ping the printer's IP address from the MacBook Pro.
    I can easily see the web setup page for the printer both through the printer settings and by entering the IP address. 
    The printer is only about a month old. 
    They bought this printer because the previous one was having problems printing from all of their devices wirelessly. That was with a router from their previous ISP. 
    At this point, I'm completely stumped as to why the printer will not print from these Apple devices. We've dealt with every issue that could be causing it: the network, the printer, and the MacBook itself. I've looked online and can see no issues with people not being able to print to a wirelessly connected printer to an Airport Extreme. I've seen some issues when the printer is plugged in via USB to the Airport Extreme, but that is not our setup. 
    Any help would be greatly appreciated!!!!
    This question was solved.
    View Solution.

    Thank you very much for your help @Sunshyn2005!!!!! I think we're good to go now!

  • Is there a workaround for Officejet 6700 Premium for MacBook Air version 10.10

    Is there are a workaround for compatibility issue between OfficeJet 6700 Premium with MacBook Air OS X 10.10 Yosemite?

    Welcome to the forums @Bron15
    I read your post about wanting a work around for your Officejet 6700 to be used on 10.10.
    There is a Full Feature driver available for you to install on Yosemite, therefore it's fully compatible. Download the driver below. If there are any issues, please let me know what exactly the problems are.
    HP Officejet 6700 Premium e-All-in-One Printer series - H711 Full Feature Software and Driver
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for