Officejet 6700 error while searching for updates: 'Printer could not connect to server'

I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!

What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Similar Messages

WLC connect LDAP for Authentication, but could not connect to server

Hi Everyone, I got a problem when I use WLC 5508 connect to LDAP for authentication, but no luck there, it's a simple config, but not easy to work on my job, I got the following messgae:
Service Port - Not connected
Distrubution port include:
     Management Interface - in AP Management VLAN - 30
     Student AP interface - in Student VLAN - 20
     Staff AP interface - in Staff VLAN - 10
AD is in Staff VLAN - 10
WLC LDAP Server setting
Base DN:OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk
User Attribute: sAMAccountName
User Object Type: Person
Debug aaa all enable message
*LDAP DB Task 1: Jul 09 01:40:58.969: ldapInitAndBind [1] called lcapi_init (rc = 0 - Success)
*LDAP DB Task 1: Jul 09 01:41:00.969: ldapInitAndBind [1] configured Method Anonymous lcapi_bind (rc = 1005 - LDAP bind failed)
*LDAP DB Task 1: Jul 09 01:41:00.969: ldapClose [1] called lcapi_close (rc = 0 - Success)
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP server 1 changed state to IDLE
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP server 1 changed state to RETRY
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP_OPT_REFERRALS = -1
WLC GUI Log:
*LDAP DB Task 1: Jul 09 02:56:13.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
*LDAP DB Task 1: Jul 09 02:56:11.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
*LDAP DB Task 1: Jul 09 02:56:09.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
LDP Message of LDAP BaseDN:
Expanding base 'CN=Frankie F. Yeung,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk'...
Result <0>: (null)
Matched DNs:
Getting 1 entries:
>> Dn: CN=Frankie F. Yeung,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk
4> objectClass: top; person; organizationalPerson; user;
1> cn: Frankie F. Yeung;
1> sn: Yeung;
1> givenName: Frankie;
1> initials: F;
1> distinguishedName: CN=Frankie F. Yeung,OU=OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk;
1> instanceType: 0x4 = ( IT_WRITE );
1> whenCreated: 8/10/2011 10:28:14 China Standard Time China Standard Time;
1> whenChanged: 8/10/2011 10:31:26 China Standard Time China Standard Time;
1> displayName: Frankie F. Yeung;
1> uSNCreated: 3850555;
1> uSNChanged: 3850571;
1> name: Frankie F. Yeung;
1> objectGUID: 6ebfc7e9-6989-4f11-bae7-62c23af67edc;
1> userAccountControl: 0x10200 = ( UF_NORMAL_ACCOUNT | UF_DONT_EXPIRE_PASSWD );
1> badPwdCount: 0;
1> codePage: 0;
1> countryCode: 0;
1> badPasswordTime: 0;
1> lastLogoff: 0;
1> lastLogon: 0;
1> pwdLastSet: <ldp error <0x0>: cannot format time field;
1> primaryGroupID: 513;
1> objectSid: S-1-5-21-3867848445-1581729766-1247451615-2172;
1> accountExpires: <ldp error <0x0>: cannot format time field;
1> logonCount: 0;
1> sAMAccountName: fckyeung;
1> sAMAccountType: 805306368;
1> userPrincipalName: [email protected];
1> objectCategory: CN=Person,CN=Schema,CN=Configuration,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk;
Hope I can resolve this problem ASAP, thanks!

Your AD is in the Staff Vlan so maybe the WLC uses the Staff interface instead of management to contact the AD. I don't know how you sniffed exactly.
The comment about eap methods you saw is when you use LDAP with dot1x security. It is the same as saying "You cannot do peap-mschapv2 or eap-fast-mschpv2 with LDAP".
But you can do LDAP for web authentication, that has no eap methods.
Your original problem was a binding problem from the WLC, so we can expect that the WLC really is sending traffic towards AD.

Error while consolidating. The operation could not be completed.

Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
What gives?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

SSRS Database Configuration Manager Error - Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception

I'm Getting the "Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception" Error on an existing Instance of SSRS that had been working previously (lots of installs/patches since).
Any time I try to hit the "Test Connection" button on existing connections or create new ones from the SSRS Config Mgr., it throws that error.
I know the SQL Server connectivity works (I have SSMS installed on there and can cut and paste server Login to connect). The problem is I can't really get any more details on the error...Event Viewer isn't logging anything, I have upped the trace level
to 4 in the reportingservicesservice.config file, I have even watched it with procmon and nothing obvious pops up.
Let me know if anyone else has been down this path and what they have tried.

Hi BillOlive,
Based on my research, the issue may be related to user access permission. You can refer to the following method to troubleshooting the issue:
Open C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG folder | right click on the machine.config file | Properties | Security | make sure your domain account has FULL CONTROL permission on this file.
If above steps still do not work, please backup your machine.config file to somewhere else and replace with the attached one from my Windows Server 2008 environment.
Alternatively, app.config file also may cause the same issue. There is a similar issue, you can refer to it.
http://stackoverflow.com/questions/6922879/exception-type-initializer-for-system-data-sqlclient-sqlconnection
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

HT201210 Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

Network error could not connect to server 127.0.0.1:5900

I have created a virtual machine in VM manager from a template and when I try to view the console I get the error "network error could not connect to server 127.0.0.1:5900"
The way that I have everything set up is this.... I am using Oracle VirtualBox installed on Windows 7 and I have created a virtual machine in VirtualBox with Oracle Virtual Server installed and I have Oracle VM Manager installed on that same virtual machine. After reading some forums I found out that I needed to install TightVNC to be able to use the console from Windows IE. So, I have installed TightVNC on my OVS but I can not even tell if it is running. I have also made sure that in iptables that port 5900 is open. I have confirmed this by using nmap to scan my ports and port 5900 is open for vnc when my virtual machine in vm manager is running. I just can not figure out why I am getting the network error unless TighVNC is not running on my OVS. Does anyone have any ideas for why this might be happeneing. Thanks

Hi,
it seemed when you registered the OVM server to the OVM manager, it did not deliver the correct hostname, but the local address instead.
See if your /etc/hosts contains the hostname in the 127.0.0.1 line.
Correct the /etc/hosts, remove the OVS server and reregister with OVM manager.
Regards
Sebastian

EAS - Error: "Could not connect Administration Server

hello All,
i am very new to EPM
i have installed EPM 11.1.2.2 with web application deployed to single manage server
OS : windows server 2008
database : sql server
when i try to connect EAS console it gives me error
Could not connect Administration Server
any idea?

If it has been deployed to a single managed server on the default port then you will need to add the server in EAS console as servername:9000
Cheers
John
http://john-goodwin.blogspot.com/

Error while searching for Business Partner in Web UI

Hi,
While searching for the Business Partner in Web UI either by First Name, last name or Account ID, we are getting following error:
Cannot display view BSPWD_BASICS/ErrorView2 of Component CRM_UI_Frame
An exception has occured
Exception class: CX_BOL_EXCEPTION - Access previously deleted Entity
Method: CL_CRM_BOL_ENTITY=>GET_ROOT
Source Text Row: 12
When the business partner blind search is given (i.e. by entering *), all the business partners get displayed without any problem.
Also, this problem occurs only for some business partners and NOT ALL.
This problem, has also been observed sometimes when an IBase entry is created in the background.
We are not quite sure whether notes, 135814 & 1515327 will help us in this regard, as the root cause is still unknown.
Could anyone suggest possible causes and solution for the same. We are on CRM 7, using the standard business role.
Thank you in advance.
Regards,
Chhaya

Hi Shiromani,
We have observed that this problem is peculiar with the data records attached to IBase ONLY. It means, if we process them further e.g. create a contract for the Business Partner after attaching the IBase, this problem doesnt occur. Then we are able to search the BP without any error.
In short, when an IBase is created for a BP, and if a search is given for such BP, the error given in the first thread occurs, But when an IBase is created and immediately after that a contract is attached to the BP, and if a search is given for such BP, then there is no error.
We are still further investigating the root cause. But any suggestion/inputs are welcome.
Thank you.
Regards,
Chhaya

Error while checking for update

Lately, when I sync my iPad to iTunes on my mac, when I click on "Check for Updates" I get the following error message...
"iTunes could not check for an update to the carrier settings for your iPad. An unknown error occurred (1631).
Make sure your network settings are correct and your network connection is active, or try again"...
The network is fine, both on the mac and the iPad... And the phrase "...could not check for an update to the carrier settings" doesn't even seem to make sense???? It used to work but this just started recently and now the error pops up every time I try... My iPad is WiFi + 3G but I've never activated the 3G coverage...
Any thoughts??? thanks... bob..

I hadn't seen that error either until just recently... I found this post,
http://discussions.apple.com/message.jspa?messageID=12635600
where folks with the same problem have appeared to have found an answer...
All I did was toggled my Cellular Data switch from OFF (where it always was before) to ON for a few seconds... That is not to say I signed up for AT&T service... I just toggled the Cellular Data switch but I was still running in WiFi mode as always...
And it worked... Message gone... Other folks on that same post talk about inserting non-active SIM cards into their iPads to clear the error??? Don't know about that but the Cellular Data from default OFF, to ON and then back to OFF has, for the moment anyway, cleared the message for me...
bob...

After 2.0 Update "iTunes could not connect iPod error (0xE8000001)?

I've downloaded the 2.0 update for my iTouch... after the installer had finished its work it alerted me that the iTouch was rebooting and would appear in iTunes. However, I got this error message instead:
"iTunes could not connect iPod unknown error occured (0xE8000001)". I'm not sure if I should disconnect the USB or not.. or what is going on. Any suggestions?
Thanks!

Sweet! The power of the collective on the web...
Jeff - try this, worked great -
unfortunately i lost all my info on my touch when doing this, but I can dedicate some time tonight to resetting my wallpaper, my mail settings, etc.
i think the 'DFU' in these instructions means device firmware upgrade...found this on another forum where people complaining of same problem...
1. Hold both the home and power buttons until the device turns off
2. EXACTLY one second after the iPod turns off, release the sleep/wake button, holding the home button still ( the apple logo SHOULD NOT BE ON ).
3. In about 20 seconds, you will see your iPod appear in iTunes, but the screen on your iPod will still be off. You are now in DFU mode.
4. RELEASE the home button as soon as your iPod appears iTunes. If you fail to do so, your iPod will simply go back into recovery mode.
yo Apple - please roll out some info on this 'known issue'; While $9.95 isn't a budget-breaker, if you have to figure out how to make that $9.95 work on your Apple device like it appears some of us are, it speaks to posting something in Support about it - thanks!

Error " Could not connect Administratin Server "

Hi All,
I am getting an error while connecting to Administratin Server " Could not connect to Administration Server "
Server : AIX 5.3 ML7 64 bit
Application Server : Apache Tomcat
Version : Hyperion System 9.3.1
While configuration it does not give any error and shows the successfully deployed.
I re-configured the Adminstration Services again, stopped / re-started the services, but it did not help.
Any suggestion / help would be highly appreciated. Thanks !
Regards
BD Mahendru
Presently in Jordan : + 962 777 603308

AIX server for SS. I didn't want to mess up my original files so I created a new start script and a new setJavaRuntime script.
You can use FTP to send the copied file and edit. there and sent it back
1. Make a copy of the file /Hyperion931/deployments/Tomcat5/bin/ startSharedServices9.sh
2. Edit the original startSharedServices9.sh file and change the section that sets the Java:
To check JAVA HOMe. please type env or open the . .profile and you should see that,
This is what you will see.:
# set JDK/JRE VENDOR
if [ -r $CONFIGTOOL_HOME/setJavaRuntime.sh ]
then
. $CONFIGTOOL_HOME/setJavaRuntime.sh
else
echo "ERROR: Could not read $CONFIGTOOL_HOME/setJavaRuntime.sh"
to
# set JDK/JRE VENDOR
if [ -r $CONFIGTOOL_HOME/setJavaRuntime142.sh ]
then
. $CONFIGTOOL_HOME/setJavaRuntime142.sh
else
echo "ERROR: Could not read $CONFIGTOOL_HOME/setJavaRuntime142.sh"
3. Copy the Hyperion931/common/config /setJavaRuntime.sh to setJavaRuntime142.sh
4. Edit the setJavaRuntime142.sh file and modify the JAVA_HOME to point to Java 1.4.2:
JVMS="JRE-IA64 JRE-64 JRE"
for JVM in ${JVMS}; do
if [ -x "${HYPERION_HOME}/common/${JVM}/${VENDOR}/1.5.0/bin/java" ]; then
JAVA_HOME="/usr/java14"
break;
Use the modified startSharedServices9.sh to start Shared Services.
Perform the Sanme with AAS also.
Kind Regards,
Sriram

Administration server error: could not connect to server

I was just viewing some outlines and calc scripts. I got un error trying to close a clac script. It said unable to unlock and then closes EAS. I tried to log back in and I am getting a could not connect error. How do I fix this or do I just recycle the server

A little less drastic is to restart the EAS service. I've had an occasion or two where the service just up and stopped for no apparent reason, leaving me hanging with several hours of work to be redone in an outline... <sigh>
Anyway, restarting the EAS service may be all that you needed to do, it may have aborted or hung itself.
Edit: clearer to say service here rather than server.

Error Code -OVM-1000 OVM Manager could not connect to {0}, please check

Hi
When i tried to import the template through OVM Manager it throws the follownig error.(It was working fine before)
OVM Manager could not connect to {0}, please check the IP and Oracle VM agent password.
I did the following trouble shooting
1.Reset the OVS agent password but didnt work.
2.I am able to import ISO files and created the shared disks.
3.Checked the connectivity between OVM Manager to OVS server and checked /etc/hosts file,firewall settings ( disabled state in both) & timings also.
But i couldnt pinpoint the exact issue. Can anybody help me out on this?

Fixed it. Shutdown all the VMs and rebooted the base server. Configured the ovs-agent ( ovs-agent configure) again and restarted the ovs-agent.(ovs-agent restart). Now i am able to import the templates.
Also OVM Manager shows all the VMs in shutdown status after reboot the base server and i fixed it used "Reset" button in OVM Manager.
1) Click on the Virtual Machines tab found on the top left corner.
2) Select the radio button of the appropriate virtual machine that has the incorrect status displayed.
3) Click on the ‘More Actions:’ drop down box and select the option ‘Reset’
4) Click the ‘Go’ button for the reset to take place.
Once the ‘Go’ button is selected, the virtual machine will reset and display the appropriate virtual machine status.

SOLUTION FOR 3GS WIFI could not connect to internet

i'd try all suggestions but still not able to connect...last month i try to update my iphone 3gs to OS4 but now i experience the wifi could not connect or my cellular could not active....3G appear on my signal
TRY THIS GUYS GO connect your iphone to itunes.
after connecting to itunes go to your phone click GENERAL-SETTING-RESET-RESET ALL SETTING.....your iphone will restart and try connect your wifi...presto it works it..SALAMAT.plS REPLY ANY COMMENTS

If your having trouble connecting or staying connected to wifi try changing your router encryption to WAP2 if its currently Wep

App Store error while checking for updates

I noticed recently that there hasn't been any updates for OS X Mavericks so I decided to manually check for one. When I did so, I got this error while attempting to check for an update:
There's not much else to explain. The only other thing that has been getting really weird on my computer recently is my keychain. It keeps forgeting the wifi password for my house saying "Keychain 'System' could not be found to store B7F3D". It also keeps forgeting my icloud email password. Other than that, there is nothing else wrong.
Thanks for any help!
-Mpconnel

It seems it fixed on its own. Everything is working properly now.

Officejet 6700 error while searching for updates: 'Printer could not connect to server'

Similar Messages

Maybe you are looking for