Officejet 7000 E809a driver doesn't download in mac os 10.8

1. Product: HP Officejet 7000 E809a
2. Operating system: Mac OS 10.8.1
3. printer initially worked fine, then began to print only blank pages. an attempt to delete/re-install the driver resulted in the following errror message (upon attempting to download/update print drivers):
Setting up HP officejet 7000 E809a...'
Can't install the software for the HP officejet 7000 E809a because it is not currently available from the Software Update server.
4. no known recent changes to system

Hi,
Download and install the printer software below (Although the link direct you to a different model, the same software used for your printer model as well):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108396-1&cc=us&dlc=en&lc=en...
Once the installation complete reboot your Mac and update the latest drivers by clicking the Apple icon and then Software Update.
Please let me know of any problem,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP OfficeJet 7000 E809a printers

I have two HP OfficeJet 7000 E809a printers that I want to network. One has been given the wanted IP but the Server 2008 R2 print server cannot see the printer => No install possible. The other one prints only blank pages, no matter what I do, so I cannot configure that one. Anyone?

These are the consumer forums. You would have better luck finding an answer on the Enterprise forums. Sorry for the confusion.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hewlett Packard Officejet 7000 e809a heavy paper wont load

hi,
have problem wit my new HP Officejet 7000 wich wont load heavy media like 150-200 g/m2 an i have just no idea why when it should support card media up to the 200 and photo media up to 280 g/m2 any way here is an video and some photos attached about what happens with paper, looks like paper crashing to something inside printer
http://www.pasteall.org/pic/22538
80 g a4 office paper is loaded relatively fine same a3
about driver paper setup it has no matter what do i set or how many paper is load (BTW heavy paper loads fine when i insert it wide side like on a3 size) no matter what os same problem under windows and linux
question is what should i do with this issues
This question was solved.
View Solution.

Input tray paper 60 to 105 g/m2
180 gm office paper paper is outside of the specification.
Regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Officejet 7000 E809a error

I've just installed my new officejet 7000 and now it says there is a general printer problem.
The light of the power button and the light of the paperjam button keep flashing.
There is paper in the printer, I've inserted the cartridges correctly.
Does anyone have any idea what I did wrong or what I could do to fix it?
Thanks

I have exactly the same problem with same type of A3 printer... Please how do i fix it?
Thanks

Officejet 7000 E809a - C9299A not printing black

My printer stopped printing black. It printed very faint black 4 times, then stopped printing black completely.
Cleaned heads (first and second level clean)
Aligned cartridges
replaced cartridges - it printed one sheet with faint black after replacing cartridge, then stopped printing black.
Let it sit for several hours
It still doesn't print black. help?

beccalecca wrote:
So it's hopeless? I have had this printer for about 6 months and babied it the entire time. Only use it when I need color prints. Printed faint black then stopped. did all of the things suggested- nothing. Replaced the ink cartridge- nothing.
What do I do? Sure makes you look crappy to your boss when you got to pick the printer and this happens.
Hi beccalecca, as the printer is 6mths old it's likely still in warranty. So if you've followed the usual troubleshooting I'd recommend contacting HP phone support as you may require a replacement.
Support phone no.s
http://welcome.hp.com/country/us/en/wwcontact_us.html
Hope this helps
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Problem installing "HP Officejet 7000 E809a Series" drivers

Get the following error meassage after unistaller dies during installation of Driver updates "The extended attributes are inconsistent."
Print is working and net connect to printer is working, HP Diaagnostic prints test page with no problem.
Updated driver dies during uninstall of old driver software.
Anybody know what the error message is trying to say?

Hi RogerBeagle,
I hate to hear you are having issues. It appears you may have an issue with your system files or settings. There are several reasons this error occurs such as corrupt windows files or system file mismatches. Have you recently changed any settings regarding themes or sound settings? Please see the below steps that may resolve the issue.
Start here:
1. Change system sound settings-under user account control set sound to "none"
2. Change the theme to "default" if it has been set to another theme
You can also run a SFC scan from the command prompt, which will repair or delete corrupt files. I suggest trying the previous steps first as deletion of certain files may cause loss of data. Please see steps below for system file check scan. Here is a 3rd party link that covers this process in detail-HP and I are not responsible for the content of this site. Click Here
1. Open command prompt- type CMD in search/run
2. In the command prompt type sfc/scannow
3. It will run the scan and repair/delete corrupted files
Here is a link to 3rd party website that may provide additional information regarding this error, however this website is not associated with HP. HP and I are not responsible for content of this website. Click Here
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Officejet 7000 E809A envelope feed

Printer will not feed #10 envelopes. Envelope stops half way thru and rollers spin.

Hello,
Try updating the print driver software from the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-77813-2&cc=us&dlc=en&lc=en&...
This may help resolving your issue.
I work for HP.

Officejet 7000-E809a Booklet printing

I am trying to print an 8 page A4 pdf document on A3 paper in booklet form. I have got it printing the pages in the correct order but there is a problem with the top margin of the document page which either gets clipped by about 5mm, or the whole page gets shrunk to about half its size and sits in the middle of the page looking silly.
The other thing that happens is that sometimes it prints 4 pages on one side of the sheet instead of two, and it is not clear which setting causes this.
It prints perfectly on my Design jet 90, so there must be some kind of problem with the printer margins, There are a confusing variety of options for printing with or without borders and fitting the page, can anyone help with what the settings ought to be?
Is there any way of finding out what the printer margins are and if they are adjustable?
Thanks.

Hi,
Please try custom size, printer supports :
Other supported paper
Paper typePaper size
Custom-sized paper
Between 76.2 to 330.2 mm wide and 101 to 1117 mm long (3 to 13 inches wide and 4 to 43.9 inches long)
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

New upgraded SSD drive doesn't appear in MAC OS X Utilties

I upgraded my 128 SSD to 512 SSD but when I try to stall my saved profile form Time Machined back up location, the HD is not shown as an option! As how the new SSD can be formated?
Farshad

I also tried to run it through Console but got the same message "10.5 with FileVault is not supported". What does that mean? I thought all Mac OS since Leopard came with File Vault.
I also turned File Vault off, restarted and tried one more time. Again, nothing.

Officejet 7000 faint printing

We have an Officejet 7000 E809a wide format printer in the office. It appears to be working perfectly for most people, except for one computer that when printing to the printer documents come out very faint, as if they were printed in draft mode. This computer is set up exactly the same as the other computers in the office - Windows 7, Office 2003, same printer driver. The printer preferences are set to 'best' quality and I've even copied the normal.dot template from a working machine to eliminate that as the cause.
The same document prints perfectly fine on a HP LaserJet in the office, just not to Officejet 7000. I've tried deleting and recreating the printer on this computer, I've updated the driver, deleted the driver and reinstalled from the server hosting the printer, deleted the registry entries for the printer and reinstalled it, but nothing seems to have made any difference. Short of reinstalling Windows on this computer I really don't know what else to try.
Does anybody have any suggestions please?

Hi @GavinS38 ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand you are experiencing feint printing on 1 specific computer in your office. All of the other computers print fine but this specific computer is printing feint.
Try taking a run through of this generic HP Officejet 7000 print quality document and see if it fixes the issue for you. Troubleshooting Print-Quality Issues
Let me know the outcome! Look forward to hearing back from you.
I worked for HP.

Blink the catridge led one by one in officejet 7000 wide format

When send the test page the printer become offline and the led of catridge is blink one by one.Please suggest to how to resolve it.

Hello , I may be able to help you with the blinking lights on your Officejet 7000 wide format printer. Using the Blinking Lights on the HP Officejet 7000 (E809a) document I found out that the light sequence you described is related to the printhead installation. To make it easier for I have copied the suggested steps here for you; Solution One: Check the printhead installation
Use the following steps to make sure the printhead is correctly installed.
Step one: Remove the printheadMake sure that the product is on.Lift the top cover. The carriage moves to the center of the product.
Figure : Open the top cover
Wait until the carriage is idle and silent.Disconnect the power cord from the back of the product.Remove the cartridges. Press the tab on each cartridge, and then remove each cartridge from its slot.
NOTE:Do not leave the cartridges outside the product longer than 30 minutes. Doing so can result in damage to both the product and the cartridges.Lift the latch handle on the carriage until it stops.
Figure : Lift the latch handle
Lift the printhead straight up to remove it.
Figure : Remove the printhead
Step two: Reinstall the printhead
Reinsert the printhead. Make sure the green and purple blocks on the sides of the printhead align with the corresponding color blocks on the carriage; green to green, purple to purple.
Figure : Insert the printhead
Carefully lower the latch handle before reinserting the cartridges.
NOTE:Leaving the latch handle raised can result in incorrectly seated cartridges and printing issues. The latch must remain down to correctly install the cartridges.Figure : Lower the latch handle
Reinstall the cartridges. Using the colored shape icons for help, slide the cartridges into their appropriate slots until they snap into place and are seated firmly in the slot.Close the top cover.Try printing again. You could also try the steps in 'Printhead Problem' or 'Printhead Appears to be Missing or Damaged' Displays for HP Officejet 7000 Wide Format Printers. If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options. Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. Thanks,

HP OfficeJet 7000; resume light

So, my printer is pretty much useless right now. Won't turn on and the resume light is flashing. Please help me out.
Power light: OFF Resume Light: FLASHING QUICKLY

Hello there! Welcome to the forums @Rich-Vol11
Please check out the guide I have posted for you below. There you will see the troubleshooting steps for a blinking Resume Light that should help with the issue you're having!
Blinking Lights on the HP Officejet 7000 (E809a), 7000 Special Edition (E809b), and 7000 Advantage (...
If the problem continues, please give us a call.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Happy Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet 7000 Wide Format Printer - E809a - losing connection through router

We have an issue getting sustained response from our HP Officejet 7000 Wide Format Printer - E809a which is linked to the wireless network by ethernet cable to a Netgear router. We have tried stripping out the driver software & uninstalling the printer from the register, then re-installing through latest downloads from the HP site. This works, especially if the device is set as the default printer, but within an hour the printer greys out in the device register and the default automatically resets to another printer. Does anyone know why this printer is losing its connection?

Hi , I see by your post that the default printer keeps changing. I would be happy to help you.
Uncheck the SMTP setting in the print drivers, to see if that will help.From Devices and Printers, right click on the printer and left click on Printer Properties, click on the Ports tab, select Configure Port, uncheck SMTP and the printer should show online again. If the issue persists, please take a look at this document. HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Windows 7. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

I downloaded Yosemite OS X and when I try to select my HD (the disk) where I want to install it, the hard drive doesn't have enough space. What can I do and still have all my files? I haven't backed up...

I downloaded Yosemite OS X and when I try to select my HD (the disk) where I want to install it, the hard drive doesn't have enough space. I have a MacBook Pro bought in 2008. What can I do and still have all my files? I haven't backed up...

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
I recommend that you also make a backup before proceeding. Just quit the installer.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

Those links weren't particularly helpful to me. They convinced me to install the drivers for my USB 2.0 card, but that didn't make a difference. Still no OS X without a PRAM reset if I've dared to venture into OS 9.
It's always been my understanding that an unblessed System Folder will not be selectable in OS 9's Startup Disk control panel. My folders are blessed and healthy. Of course I'm running 9.2.2, as stated in my first message. I also frequently verify and repair my disks and permissions.
I did a verbose startup of OS X, and noticed something funny about "ATY...too old." Perhaps this problem is related? I ventured into my system.log file and there it was, repeated over and over, everytime I've booted this computer:
Aug 8 18:30:24 localhost kernel: From path: "/pci/@d/pci-ata@1/ata-4@0/disk@0:10,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci/@d/pci-ata@1/ata-4@0/@0:10</string></dict>
Aug 8 18:30:35 localhost kernel: ROM ndrv for ATY,Rage128y is too old (0xb3383430)
Aug 8 18:30:41 localhost init: kernel security level changed from 0 to 1
Anyone know how to interpret that? Is it related to my problem? I googled it, and all I found was a web board of people arguing over whether the Apple installed stock ATI Rage video card that came in the G3's is appropriate for Panther. The Ye's have it as far as I'm concerned...as long as I leave OS 9 alone, my video is fine on this computer!
14" iBook G3 800, B&W PowerMac G3 350, Mac Classic II 16 :-P Mac OS X (10.3.9) System 7 Rocked!

Officejet 7000 E809a driver doesn't download in mac os 10.8

Similar Messages

Maybe you are looking for