Officejet 7410xi 'SolutionCenter.msi not in ...'

Printer: HP Offijet 7410xi All-in-One + Installation CD, Computer: Dell XPS 8700, OS: Windows 8.1
Issue: When HP attempts to update the printer software, update process error message: SolutionCenter.msi not in C:\Users\TEST\AppData\Local\Temp\7zS1628\setup\SolutionCenter\ with a browse option.
The update completes when the Installation CD is inserted and 'browsed' to it.
To avoid digging out the CD everytime, I copied the entire Installation CD to a folder, HP Install, on the computer. BTW, no SolutionCenter.msi could be found after copying into HP Install.
When the update process begins again later and I browse to the folder, HP Install, Same error message.
Please provide a work around so SolutionCenter.msi (and other files) can be found on the computer and update process completes successfully without resorting to inserting the CD.
This question was solved.
View Solution.

Hi xandux,
I can help you with getting the printer setup properly, with the latest software.
Uninstall the old printer software and download and install the latest drivers for Windows 8.1.
Uninstalling the Printer Software.
HP Officejet 7410xi All-in-One Printer Drivers.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

SolutionCenter.msi not found?

I recently ran Malwarebytes Scan & picked up two viruses for Digital Imaging Software. Now I have a popup to install the SolutionCenter CD everytime I turn on mom's pc.Pavilion 6744y, running Win7 64bit. Photosmart 4180 series printer. I ran MBAM on my pc & didn't get the same issue. haven't checked my laptop yet. Please advise

You might try the steps in the following weblink:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01631295&cc=us&dlc=en&lc=en
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

HP Office Jet 8625 and HP OfficeJet 7410xi All-in-One (a) difference (b) install on one desktop

Given:
HP OfficeJet 7410xi All-in-One connected to 2 desktops (Visa and Win8.1 - 64-bit) via usb network hub (i.Connect). Able to print from both computers. Vista machine has HP Solution Center installed (able to import pictures from camera SD card, scan documents to PDF, etc).
Q1: Are print drivers and sw for 2 different HP printers (HP Office Jet 8625 and HP OfficeJet 7410xi All-in-One) compatible on the same computer?
What is the installation procedure for the SW and driver for HP Office Jet 8625 and connect via Wireless to Visa and Win8.1 - 64-bit desktop such that the 7410xi All-in-One current setup not impacted.
Objective: Ability to select the desired printer for printing,Reason: the 7410 HP Solution Center has additional functions (scan to Pdf, import from camera SD card, etc) than the 8625 so need both.
Q2: Does the HP Office Jet 8625 have similar HP Solution Center ... please provide link to the HP Solution Center SW for the the 8625.
Q3: Where is the user guide manual for the HP Office Jet 8625? The user guide manual refers to 8610, 8620, 8630. Is 8620 same as HP Office Jet 8625; what's the difference?
Q4: Where is the text installation for the HP Office Jet 8625? The only installation guide is a poster -- no words on the poster. Please provide text based setup instructions starting from unpacking out of the box.
Concern with users comments regarding the HP8625: http://reviews.costco.com/2070/100116415/united-stationers-hp-officejet-pro-8625-e-all-in-one-printe...
Q5: "..print envelopes, it thought it was "out of paper". Looks like the plastic "switch" that releases the tray springs is not properly designed...." Please provide instructions to correct the "switch" that releases the tray springs.
Q6: "..unable to print using the black ink cartridge if any of the other three color cartridges are empty..." How to print black and white if the other color cartridges are empty or is this statement an HP design?
Q7: "...after 15 min goes into sleep mode and wont come out unless I unplug machine..." How to turn off 'sleep mode'? If printer enters 'sleep mode', how to turn on without having to unplug/plug printer?
Q8: "..8625 went into powersave mode, then it was Printer OFFLINE...The problem was the HP8625 has a VERY POOR WEAK wireless system. " How to prevent HP going into powersave mode then Offline without doing anything to my network setup?
Q9: "... Windows 8.1 will not print via wireless to this printer ... Download the latest drivers from the HP website for the 8620 series - not from the supplied CD. Then download the "HP Print and Scan Doctor" and run the program. It should render the printer functional with windows 8.1. .. The printer works out of the box with the "old" version of windows perfectly..." Please provide a solution if this user's solution may cause other compatibility issues?

Hello @xandux,
I would like to assist you today with the answers to the questions that you have regarding the HP Officejet Pro 8625 e-All-in-One Printer.
Q1: The print drivers for the HP Officejet Pro 8625 e-All-in-One Printer and HP Officejet 7410xi All-in-One Printer are compatible on the same computer.
For the Officejet Pro 8625 you would first run the Wireless Setup Wizard on the front panel of the printer to connect it to the network.
How to Configure Wireless:
On the printer touch screen, touch the Right Arrow () to display the second navigation screen.
Touch the Setup icon (). The Setup Menu screen displays.
Touch Network, touch Wireless Setup Wizard, and then touch Continue.
Wait while the printer searches for routers that are within range of the printer. The Select Network Name menu displays.
Scroll down the list of network names until you find the name of your network.
Touch the name of your network, and then touch OK.
If prompted, enter the WEP or WPA key. This is case sensitive.
The printer will now connect to the network.
Once your printer is successfully connected to the network than you may run the installation of your printer.
The driver package for both Windows Vista and Windows 8.1 is the same. Should you want the latest drivers for the HP Officejet 8625 on both computers please click here to download the drivers. You will need to open that link on both the Vista and the 8 Computers. Once the website opens select the Download button on the top left. Once the download is complete the installation window will pop open. The onscreen prompts will walk you through the quick and easy install. You simply select that you are connecting a Wireless printer when prompted, the installer will search and find your printer and complete the install. You simply sit back and hit 'next' a few times. For additional install assistance and documentation please click here.
I can assure you that your HP Officejet 7410xi All-in-One Printer will not be affected by the installation of the HP Officejet Pro 8625 e-All-in-One Printer as they use completely different drivers.
Q2: The HP Officejet Pro 8625 e-All-in-One Printer uses the HP Printer Assistant Software rather than the HP Solutions Center Software. The Printer Assistant Software installs with the printer. Therefore, there is no separate link available for this. The Printer Assistant will load an icon on your computer that looks like this:
Once you click on that icon you will see a similar screen to this:
Q3: The User Guide for your HP Officejet Pro 8625 e-All-in-One Printer can be found here. It is for the Officejet Pro 8610/8620/and 8630 products as they are all within the same series.
The Officejet Pro 8625 is identical to the Officejet 8620. For specific specifications for just the Officejet Pro 8620 (8625) series printer please click here.
There are slight differences between the 8610, 8620, and 8630 products.
The Officejet Pro 8610: Print speeds are slightly slow (19 ppm in black and 14.5 ppm in colour), letter size flatbed glass, no automatic duplex copies/scans. The specifications for this printer can be found here.
The Officejet Pro 8620 and Officejet Pro 8630: both models are identical with their specifications. The only difference is that the Officejet Pro 8630 comes with 2 paper trays. The specifications for the Officejet Pro 8630 can be found here.
Q4: For detailed setup and install instructions please refer to the two documents below.
For out-of-box hardware setup instructions please click here.
For installation instructions for Windows Vista and Windows 8.1 please click here.
Q5: There is no switch that should have to be altered when printing envelopes. You simply load the envelope within the paper tray and select Print, just like any other printer. For instructions on how to properly load envelopes please click here. The only issue I have seen is that people aren't 'telling' the program on the computer that the printer is printing envelopes. This may cause a 'paper mismatch' error as your machine 'thinks' it's supposed to pull letter size paper and doesn't detect that as loaded in the tray. If there was a hardware defect with the switch when the HP Officejet 8625 first came out, we are not seeing those issues now so the switch issue must have been corrected.
Q6: Because of the Printhead design within these printers, there must be ink inside the printer to print. Therefore, if you run out of yellow ink, you must replace the yellow ink to continue using your printer. Once a cartridge is empty the printer goes into a 'depleted cartridge' error state. When this happens you are not able to use any features of the printer. The best course of action would be to keep an eye on your ink levels. When you start getting prompts that your cartridge is low, have a cartridge on hand for when the ink finally does run out. What I would recommend is if you're not planning on printing a lot in colour from your computer set the 'Black Ink Only' feature under the driver to ON. If you do not have this feature enabled, when you print from your computer certain print jobs are sent to your printer as 'image' files. If a document is sent to the printer as an 'image' file the printer will use colour ink to enrich the black on the document. This causes the colour ink to run out much faster than anticipated. If you turn Black Ink Only ON only black will be used for black documents. If you want to print a colour document you simply disable the Black Ink Only feature for that specific print job.
For more information regarding why this occurs and how to set Black Ink Only please click here.
Q7: Your machine is designed to go into sleep mode after about 10-15 minutes. This is not a design flaw. Ideally, once your printer enters sleep mode, if you need to print something you simply send the print command and the printer will wake up and respond for you. Occasionally sleep mode has issues. One issue for instance is when you have a networked printer. Sometimes the routers don't send the print command to the sleeping printer properly and that causes the printer not to 'wake up'. This can be corrected with altering settings on your router. The other issue may lie with a programming issue within the printer. The best course of action to avoid sleep mode issues would be to ensure that your printer is running the latest Firmware. The latest Firmware can be downloaded here.
Q8: Again, powersave mode is the same thing as sleep mode. You should have no issues allowing your wireless Officejet 8625 to go into a sleep mode. Once the printer is asleep you simply send a print job to your printer and the printer will 'wake up' and print for you. It is rare to see 'sleep mode' or 'powersave' issues. Always keep the Firmware up to date to avoid programming issues.
Q9: Microsoft has recently released a HotFix to correct wireless printing issues as they have found printing issues within the Windows 8 and Windows 8.1 Operating Systems. This issue is not specific to HP or the HP Officejet 8625. Rather, the issue seems to affect all wireless printers on the Windows 8 and Windows 8.1 Operating Systems. The HotFix can be found here. Once the website opens you simply select the button for HotFix Download Available. Follow any onscreen prompts to install the HotFix. There has been a lot of luck with running this fix.
I hope this information helps to clear up any issues you may have. Please let me know if you have any further questions or concerns. Thanks for reaching out to the HP Support Forums!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Missing solutioncenter.msi file for 7210 running windows 7

Every time I re-boot, I get a prompt that says "can't find SolutionCenter.msi." HP has a fix here for this BUT...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-77737-1
I did the download, save and run... but it says this doesn't support anything I have and that I don't need it. WELL, I darn sure need something !!!! I have spent hours trying to get rid of this stupid prompt that appears every day when I boot up. Is there anyone at HP that can help me get rid of it or FIND "solutioncenter.msi' ??? Your help would be GREATLY appreciated ! Thanks !

I received an email saying there were new answers, but the page it linked me to had about 100 options (links, etc.), but no answers and no apparent way to navigate to any answers. Glitch? Poor page design? who knows, but another waste of time on the annoying issue. I got rid of the prompts by uninstalling Solution Center, but can't reinstall as HP says it's not available for Windows 7. Well that's what I had all along, so why no longer available? This is SO frustrating !!!

SolutionCenter.msi, What is it?

Hell
Every time I open up my Solution Center to print from my C4580 I am getting a pop up window that cannot find the path to a file called: SolutionCenter.msi, does any know what that is or are having the same issue and how do I correct that? Thank you.

Welcome to the forums @TripleMRocks
I read about the "SolutionCenter.MSI" error you are noticing and I am hoping to help you!
First of all, check out this link to a post from another user here with the same error, which was resolved by a patch. Try the patch: Accepted Solution solutioncenter.msi popup at HP Solution Center startup
If the patch does not seem to help, try completely Uninstalling the Printer Software, restart your PC and reinstall the printer: HP Photosmart C4500/C4524 All-in-One Printer series Full Feature Software and Driver
Let me know the outcome!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet 7410xi cannot turn on printer button. have incorrect black carridge installed.

officejet 7410xi incorrect black ink cartridge installed in printer. cannot open cartridge holder, not enough room, card blocking ability to lift out cartridge. print on button not working. window is on and blinking. Any suggestions?

I had this problem too.
Of course, I tried to lift it out, as you did, but it wasn't able. Then I read on another forum, that he contacted the producer of the printer, and that they went to him, and removed it.
All I can suggest is that you can contact your producer of the printer, in this case an officejet 7410xi.
I'm glad I could help you,
samside1234

Officejet 7410xi scans only fully black

my officejet 7410xi scans and copies only fully black. The light comes on and passes under the original but I only get a full black page for scans and copies. There must be a problem with the electric eye that reads the original.

The document here might help resolve issues with your Officejet 7410 scanning and copying only in black.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet 7410xi All-In-One shows error 0x07a74dds while powering-on and then stops

When I press the power-on button of my HP Officejet 7410xi All-In-One, the printer screen lights-up and shows the following:
Error 0x07a74dd6 at the top of the screen and 1959:lib_barracuda.c at the middle of the screen.
At the front panel, the following lights stay flashing:
(1) Auto Answer (2) ! and (3) On
After that, none of the buttons operate. The printer is connected through USB cable to the computer. My system is Windows 7.
I already searched for answers in the forum and didn't find a solution. I unplugged the USB cable and plugged again. I unplugged the power cable and when I plugged it back the same thing happens again, as described above. Please, let me know if there is a solution. Thanks.

HI again,
I am attaching a document that has additional steps to troubleshoot these 0x type error codes.
See if additional troubleshooting from this document helps you.
0x error code troubleshooting
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode. The sender receives an error "no answer".
When I call the fax number, if I touch the screen it will wake up immediately to receive the fax.
Printing from the computer while in sleep mode works fine.
Please advise. Im missing important faxes and can only set sleep mode to a maximum of 15 mins, so I have an alarm set to touch my machine every 15 mins. sigh...
Thank you,

Hi Willia,
Welcome to the HP Support Forums! I see when your HP Officejet Pro 8625 enters sleep mode, you are unable to receive any incoming faxes. The senders will receive a 'no answer' error. I understand your printer will wake up from sleep mode if you send a print job.
First let's go ahead and make sure the OJ 8625 is plugged directly into a wall outlet, using a power bar or surge protector can cause the printer to lose basic functionality over time. To get a better understanding take a look here: Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
Now, I would like you to update your printers Firmware, click on the link below and follow the on screen instructions:
HP Officejet Pro 8620/8625 Firmware Update
Are you now able to receive incoming faxes when the OJ 8625 is in sleep mode? If not, I would like you to contact our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Officejet pro 8625 will not print

Just purchased this printer. Scanning, faxing, email to printer all works fine. When I try to print any document it spools then deletes the print job as if done but doesn't print. I have uninstalled/reinstalled, run the diagnostic test and nothing is fixing it. Very frustrating and on the verge of returning the printer to Costco!

Hello , Welcome to the HP Support Forums!
I understand that you're not able to print from your Windows Vista computer to your HP Officejet Pro 8625 e-All-in-One Printer. I would like to assist you today with resolving this printing issue. Because you are able to scan from your computer I do not believe that the issue that you're experiencing is connectivity or software related. Rather, it does sound like a driver conflict is occuring between your Windows computer and your printer. To confirm if this is the case, can I please have you follow the steps below to install an alternate print driver on your HP Officejet. You will not lose any functions by utilising this alternate driver. Step 1: Clear Temp Files: Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 2: Load Alternate Driver: Please click here to download the Officejet driverOnce the download is complete you may get a prompt to Run the download. If you see the Run prompt, please allow it to Run.An extraction should now occur. Once the extraction is complete an installation window may pop open. Please close any install windows. You do not want to run an installation.Next, click on your Start menu. In the 'search programs and files' box type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. It should include files that say OJ860At the top of this folder you will see a file path bar. It may show something like 'Computer- Local Disk C - Users - AppData - Local - Temp - 7z . . . ' Left click on the right hand side of this file path bar at the top. The file path should now highlight.Right click on the highlighted file path and select CopyClose the Temp folderClick on your Start menuSelect Devices and PrintersRight click on your HP Officejet Pro 8625 e-All-in-One
Left click on Printer PropertiesLeft click on the Advanced tabLeft click on New DriverWhen the New Driver window opens please hit 'Next' until you see a list of Manufacturers and PrintersClick on the 'Have Disk' button on the bottom rightWhen the 'Install from Disk' window opens, simply right click on the file path bar and 'Paste' in the file path we previously copied.Click OKWhen prompted choose the HP Officejet 8600 Printer and click 'Next' until the Add Driver window closesUnder Printer Properties select Apply, but don't hit OKSelect the General tabRename your printer back to HP Officejet Pro 8625 e-All-in-One
Hit OK Now that the alternate Officejet driver has been loaded, please test printing to confirm if the printing issue has been resolved. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Officejet 6100 - H611a Will not print in grayscale when color cartridge is depleted.

The title says it all. - Windows 7 64-bit
Officejet 6100 - H611a Will not print in grayscale when color cartridge is depleted!
Even though the documentation that came with the printer says it will. After 2+ hours on the phone with HP support over the course of 2 days, I have been informed that printer WILL NOT print in black ink only if a color cartridge is empty.
I thought anyone who purchases this model should know the documents included lie.
From page 31 of the Officejet 6100 user manual: "If a color cartridge is depleted, the printer will print in grayscale using the black cartridge." LIES!
The HP Help Programs says the same thing.
I have hard-reset the printer, removed and reinserted all the cartridges, set the options to "black ink only," Nothing worked. 3 HP reps all said the same thing, "You have to get a new magenta cartridge."
Will be retuning for a refund as I purchased this model SPECIFICALLY because the manual said it would print the grayscale without color ink present.
Have had 4 HP printers over the years, never even considered buying anything except HP. This will be my last HP printer. Extremely disappointed by HP's deception.

Sorry the printer did not perform as expected. I have escalated this in an effort to get this to the right people.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Cannot delete itunes .msi not found and cannot install new one! please help

Please help me awhile ago i tried deleting then reinstalling th new version of itunes / quick time and after going through most of the installation process this comes up:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below.
Use source:
C:\Documents and Settings\Jordan\Local Settings\Application Data\Apple\Apple Software Update\
I made a picture of it here:http://i196.photobucket.com/albums/aa233/djjordie/cannotfindmsi.jpg
Then i tried uninstalling it (somehow it says its installed in add or remove programs) and the same message came up.
After ages of trying to figure it out and deleting heaps of things, when trying to install now it says:
1.run or cancel (thats not the problem) i click run picture here:http://i196.photobucket.com/albums/aa233/djjordie/cannotfindmsi.jpg
2.then it goes to this picture here:http://i196.photobucket.com/albums/aa233/djjordie/preparingtoinstall.jpg
3. then straight to this picture here:http://i196.photobucket.com/albums/aa233/djjordie/preparingtoinstall.jpg
without the the rest of the installation process...
SO i need to be able to delete it complety (the problem there is the .msi not being found).
Then install itunes / quick time without the .msi problem or the skipping of the installation process with it saying errors occurred ect...
Please help it would be much appreciated!
DJJORDIE

WHen you get trouble with msi files you usually need the Microsoft Installer cleanup utility.
Here is a method for removal of iTunes and related programs with clean up and reinstall.
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

ITunes64.msi not found message ...plz help

I'm trying to download the latest version of iTunes. The download message says" iTunes64.msi not found"
Does anyone know how I can fix this?
I have tried to repair "Apple Software Updates" by going to "change" and clicking "Repair" that didn't work.
I have downloaded a new iTunes64Setup.exe and that didn't work. Does anyone have any other suggestions or know of how to fix my problem?
Thanks in advance!!!

I also tried to :
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
But it will not let me "run" the program.

I'm running windows XP, trying to uppdate iTunes, instalations pack iTunes.msi not found. Is it posible to download this?

I'm running windows XP, trying to uppdate iTunes, instalations pack iTunes.msi not found. Is it posible to download this?
I have tried to seek for it on the computer but no.
Se picture

I had the same problem and managed to fix it by doing the following :
First go to the control panel
Choose Add/Remove programs
Find iTunes in the list
Select "Change" and then, when it comes up with the option, "Repair"
I found that this fixed the problem for me and I was able to do the update without coming up with this error - hope it helps!

Error 2 iTunes64.msi not found

I am getting an error that says Error 2 iTunes64.msi not found when trying to install Itunes in my windows laptop.

Hello Juan_fran,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes for Windows issues. I have included some additional information about the specific error:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#2
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Officejet 7410xi 'SolutionCenter.msi not in ...'

Similar Messages

Maybe you are looking for