Officejet 7500A display screen showing adverts

I have an Officejet 7500A Wide Format printer. I've had it for around 3 years and recently the display screen has started showing adverts for the printer (about its economy, ink, paper, etc.). This is a bit pointless seeing as I already have the printer but more to the point the cycling colours and words are in my line of sight and are irritating and I can't get rid of them. There don't seem to be any options anywhere to turn them on or off.
I used to just see the Home Screen with four static icons for Copy, Fax, Scan and Apps. The only thing I think I have done differently recently is installed the Full Feature Driver. I had to do this because with the basic driver I kept having to unistall and reinstall the printer. It's connected to my laptop via WiFi by IP Address.
Can anyone tell me how to get rid of the adverts and go back to the nice comforting Home Screen?

This sounds like the pritner has somehow gotten into the "store demo" mode.  I would suggest pulling the power plug for a minute, then plug back in and turn the printer back on.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Pavilion DV8000 display screen shows strips and not visible

    My HP Pavilion laptop display screen shows vertical lines - strips and not clear.
    Thanks

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are having issues with the Display of your Notebook. We will surely assist you with this issue
    1. Please check if the Display/Screen of your Notebook shows lines even in BIOS or not
    Note: Power ON the Notebook and keep tapping the F10 Key to access the BIOS
    2. Please tilt the Screen/Display of the Notebook slowly towards back and the front side, check and verify
    if the lines are seen at all the angles of the display
    3. Please connect an external desktop monitor to your Notebook and check if the lines are shown even on the
    external monitor
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • The Display Screen shows many pink vertical lines

    I purchased a Lenovo G580, and now after 1 year my screen is having some problem. The problems are:
    1. The screen has many vericals lines of pink colour
    2. The colour has been totally messed. I mean the screen has been discoloured like very bad.
    I am having this problem since past month. Went to the Support Centre even, I want to know what has happened.
    Link to picture
    Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums

    I wanted to check in to see if anyone is still experiencing pink lines appearing on the screen on G580 notebooks?
    If you are, could you please post a picture of the issue?
    Thanks,
    Amy Tupper
    Technical Resolution Lead, Pervasive Issues
    Lenovo US
    ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
    First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996

  • When I go to play a video the display screen shows it like an album cover

    and title...
    For example...for a music video, the video doesn't play and it doesn't even go to full screen. One of the video's frames occupies the side box where an album cover would normally go and beside it reads the name of the song, the artist, and the album.
    What's going on and how can I fix this??
    ipod video 30gb   Windows XP  

    Yes, I had this problem before. I'm not sure how it happened but I can tell you how to fix it. Just go to the iPod main menu, then click on videos. Go to "video settings" which is at the bottom of the menu. Once you're there you'll see the "TV out" which is "on". Just click on it. it will say "off". try playing a video now, and if it doesn't work, I'm really not sure.

  • How can I get more of my persona to show at the top of the display screen?

    Before downloading the newest Firefox, my persona at the top of the display screen showed at least 1/2 of the firefox. Now it's only the ears. How do I show more of it? Stupid question, I know, but it's bugging me.

    You can add extra empty toolbars if you want to see more of the persona.
    You can create extra toolbars to get extra space via "View > Toolbars > Customize" or "Firefox > Options > Toolbar Layout"
    You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.

  • Is there a way to set up multiple displays to show different DeskTops and/or multiple Full-Screen apps independently?

    Hello Apple users/ develpers.....
    I have been thinking about this long and hard and it seems like there should be some way to display separate Full-Screen Apps and/or mulitple Desktops.
    This would be a key feature that would make Lion surprisingly more efficient than any of its predicessors.  However, I have gone into System Preferences>Displays and could find no way to page through and get different desktops to display.  I always could extend the desktop, but why do that when I can simply use multiple Desktops and assign them to specific displays.
    (For example While on the MacBook Pro I could be doing a project in FinalCut while External Display 1 could be displaying iTunes and Display number 2 could be displaying MS Word.  And between each I can switch between each app without changing the monitor display.)
    I could also seeing this being extremely helpful in DJ and/or PowerPoint presentations.  In a PowerPoint presentation I could use the projector/display to show the individual Slides, while on the computer/laptop I could control other materials.
    Or in a DJ situation, I could be controlling iTunes from the computer, displaying a set of animations that I created in Flash/ToonBoom or another animation program, while still being able to work off of an independent display to do my homework or major project.
    The whole purpose of multiple displays would be to have multiple access to each of those.  And so if there's another APP I need to control them, or if there is a setup command I don't know about, I'd like to know right away.
    Also, if Apple hasn't really implimented this (and their OS is designed to have these features) then I guess this'd be my first recomendation to them as something that they need to fix.  This alone could be the key to crippling PC.  Don't let Windows 8 have a back door!

    Not available, why not suggest it here.

  • I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    System Preferences>Displays
    There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen

  • I own a hp officejet pro 8500a premium and when i turn it on, the screen shows 83c00009

    i own a hp officejet pro 8500a premium and when i turn it on, the screen shows 83c00009

    HI I hope you are having a great day and sorry to see that you are having this issue,
    if you still having this issue  I will do my best to assist you
    Read this article follow the steps on it GO HERE
    If you are using Win xp or later you one of several very good troubleshooting utilities that HP offers GO HERE read the intendd use and run the one that fit your needs;
    If you are not experiencing this issue any longer or you are not using Windows, let me know I will be deeply appreciated
    Hope I can be of help;
    RobertoR
    remember↓↓↓
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • My 24" iMac display suddenly shows blank screen with funny pattern

    My 24" iMac display suddenly shows blank screen with funny pattern after bootup. Anyone know the cause? http://twitpic.com/51hih7 http://twitpic.com/51hihw http://twitpic.com/51hiiv

    My 24" iMac display suddenly shows blank screen with funny pattern after bootup. Anyone know the cause? http://twitpic.com/51hih7 http://twitpic.com/51hihw http://twitpic.com/51hiiv

  • I just updated to 10.9.2 and now my MacBook pro display is showing pixilated color ribbons all over my screen. What is going on??

    I just updated my MacBook Pro to 10.9.2 and now I have pixilated bands of color running along shaded and bright areas of my display screen and graphics. I can not explain it any better than that. How can I fix this problem or should I go back to 10.9.1???

    Which model MacBook Pro do you have (e.g., "15-inch Late 2011")?
    Can you take a screenshot of the screen problem (http://support.apple.com/kb/PH4391). If the screenshot looks normal, then you've probably a problem with the screen and not the GPU. If the screenshot shows the anomalies, then the problem is probably the GPU.
    Call back - use the small camera icon in the composition bar to upload your photo:
    Clinton

  • OfficeJet 8600 touch screen has stopped displaying

    HP OfficeJet 8600 printer screen display has stopped working.  Not sure when, as printer would still "wake up" when I touched the screen and would print.  However, today I had to get a new gateway modem from my ISP and now have a different home network.  Instructions I've found on updating the printer with this information involve using the printer's screen.  I've tried rebooting it.  Any ideas on how to get the pringer screen working?

    Hi , Welcome to the HP Forums! I see that your HP Officejet 8600 touch screen has stopped displaying. I am happy to help!  Please try the steps within this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed. If this does not resolve your issue, please contact HP, phone support for further assistance. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best of luck!  “Please click the Thumbs up icon below to thank me for responding.”

  • HP OFFICEJET PRO 8600 DISPLAY SCREEN

    The display screen on the printer is so faint you can barely read it.
    The printer is plugged directly into a wall socket. The brightness is turned up to high.
    Any other suggestions?

    This is not normal, it appears you have a hardware failure.  If your printer is under warranty I suggest you Contact HP for service, if you are in the US call 1-800-HPINVENt. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Officejet 7500A Wide Format - Can't reset the paper size - won't print!!!

    I have a new HP Officejet 7500A Wide Format All-in-one printer.  I love it and have had no problems with it...until now.  The other day I went into Photoshop and printed a 4x6 photo and now my printer will not allow me to print on 8.5X11.  I have checked the paper size in Photoshop, Word, Excel, Acrobat...everything I used that day, but it all shows "letter" size paper in the properties.  I also checked the printer utilities...letter size paper is selected.
    But when I try to print, the printer and the computer both give me a "paper mismatch" error and my only option is to change the paper or cancel.  I went back into photoshop again and was able to print a 4x6 photo again - once I put in 4x6 paper - but then I changed it back to an 8.5X11 size photo sheet and tried to print on letter size paper and..."paper mismatch'.
    I changed the printer back to factory settings.  Nothing.  I just had to reset up my printer on my network, but it still won't print.  I tried to re-install the printer software from the installation disk, but it won't install.  It says "already installed".
    HELP!!!!!!  I honestly don't know what to do at this point!!!!!
    Thanks in advance!!

    I have struggled with a similer problem with my new 7500A.  I've done all the things you did. I made sure I had all updates and the firm ware update. I spent time on the phone with a lady who meant well but clearly didn't know the product. I had a difficult time communicating with her. Her accent was in the way. This morning I realy didn't want to face another day of this struggle.  As I walked into my studio I had a idea. Instead of going to the computer to try to solve my problem through menues, HP Customer Service and or communities. I went dirrectly to the printer.  I turned the printer on, the little screen on the printer lit up I touched the arrow to go to the next screen of menus. I touched "Set Up"  then scrolled down through the choices. I picked "Preferences". At the bottom of the list was.............. Media Width/Type Sensing (ON)............I promptly turned it (OFF) ......................I am printing as I was told I would be able to do prior to buying. I am not getting that anoying screen  "Paper Mismatch" . The printer is printing now on my 12 x 12 stock regardless of the type. ie: cardstock, plain paper, colored paper, construction paper. I hope this helps some of you out there.  Clearly HP was of "NO" help to me. I have read that others are installing HP 7000 drivers etc.  I've solved the problem without going to those lengths, no thanks to HP.

  • Display constantly shows "Acquiring e-mail address..."

    After setting up the Officejet 6600 the display constantly shows the HP logo with the spinning circle and says "Acquiring e-mail address...". No other functions are available on the printer as this is constantly on the display.

    Hello Marrg,
    Welcome to the HP Support Forums!
    I see that during the initial setup of the Officejet 6600 it is stuck on the point of acquiring an Email address. Have you tried to remove the power from the back of the printer while on, wait 60 seconds and then connect the power back in the printer?
    Doing that should allow the printer to load to the home screen, from there, try to enable Web Services again by touching icon in the upper left corner () and following the steps.
    If still having issues, connect a USB cable to computer, download and install the firmware update. For Windows computer: HP Officejet 6600 e-All-in-One H711 Firmware, for Mac: HP Officejet 6600 e-All-in-One H711 Firmware (For Mac OS 10.6 and above).
    Let me know if this has helped you at all.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • In updating my iPod to 6.1.2, I received an error during the update.  Now, ipod is not rebooting.  Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture.  I don't know how to reset so that I can restore my backup

    In updating my iPod to 6.1.2, I received an error during the update.  Now, my ipod is not rebooting.  It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture.  I don't know how to reset so that I can restore from my backup.
    A similar thing happened when I updated the ios on my ipad.  But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Fscommand is not working when opening PDF document in browser with Acrobat 9, why?

    We embedded a flash application in PDF using screen annotation. In the flash we use fscommand to call methods available in AcroJS.  In acrobat reader 9, if we view the document in Internet Explorer, we receive a security sandbox violation message say

  • Accts Pay/Rec and Procure to Pay/Order to Cash Question.

    I have seen different country specific oracle sites list the following courses 1 Procure to Pay Fundamentals Order to Cash Fundamentals 2 Implement and use Payables Implement and use Receivables Are (1) and (2) the same thing. thanks

  • BMM issue for multiple fact tables

    Hi All, I have three facts F1,F2, F2 and two confirmed dimension D1,D2 in my sample rpd. In BBM layer , I tried to do the modeling as follows instead of creating one logical fact table. There are many fact tables to come in future. F1<----D1--->F2<--

  • Mail title in Actions

    Hi All, When I send a mail through Actions in my activity "After Sales" the mail received by my customer the subject is the name of the smartform "ZAGREEMENT". But I need the smartform desc to be the subject of the mails. I have checked some notes bu

  • Stalling screen, silent harddrive? 10.8.4

    I recently had a corrupted volume directory on my boot hd.  I installed a larger 3T drive and used Techtool Pro to export, clean the directory, and optimize. I ported the fixed clone to the 3T and made it the boot drive. The old boot still says it is