Officejet 7610 wide format: can't scan legal documents to pdf

I am having a problem scanning legal documents from the ADF and/or off the glass.
only cropped letter size gets created. 
I believe I am using newest model with the newest drivers. 
Just purchased and installed drivers from the internet. 
I need work-a-round or other fix.

There is no setting in the Front Panel to set to Legal. All paper size settings need to be done on the SW. I believe you have installed the overall SW.
Select HP Office 7610 series icon from pc desktop. Otherwise Click > Program > HP > HP Officejet 7610 series to open HP Printer Assistant.
1. Select Set Preferences.
2. Select Paper/Quality.
3. Change Paper Size to Legal.
4. Click OK to save setting.
Now by default the scan target will be scanned to Legal size. Take note by default if there is A4 or Letter siz paper and when setting is at legal, then these paper sizes will be scanned to legal sizes.
Alternatively if you do not want to set the default size to legal, then you can go to HP Printer Assistant. Select "Scan a document or Photo". Select the appropriate settings and do a SW scan.
Remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.

Similar Messages

  • HP Officejet 7500A Wide Format - Can't reset the paper size - won't print!!!

    I have a new HP Officejet 7500A Wide Format All-in-one printer.  I love it and have had no problems with it...until now.  The other day I went into Photoshop and printed a 4x6 photo and now my printer will not allow me to print on 8.5X11.  I have checked the paper size in Photoshop, Word, Excel, Acrobat...everything I used that day, but it all shows "letter" size paper in the properties.  I also checked the printer utilities...letter size paper is selected.
    But when I try to print, the printer and the computer both give me a "paper mismatch" error and my only option is to change the paper or cancel.  I went back into photoshop again and was able to print a 4x6 photo again - once I put in 4x6 paper - but then I changed it back to an 8.5X11 size photo sheet and tried to print on letter size paper and..."paper mismatch'.
    I changed the printer back to factory settings.  Nothing.  I just had to reset up my printer on my network, but it still won't print.  I tried to re-install the printer software from the installation disk, but it won't install.  It says "already installed".
    HELP!!!!!!  I honestly don't know what to do at this point!!!!!
    Thanks in advance!!

    I have struggled with a similer problem with my new 7500A.  I've done all the things you did. I made sure I had all updates and the firm ware update. I spent time on the phone with a lady who meant well but clearly didn't know the product. I had a difficult time communicating with her. Her accent was in the way. This morning I realy didn't want to face another day of this struggle.  As I walked into my studio I had a idea. Instead of going to the computer to try to solve my problem through menues, HP Customer Service and or communities. I went dirrectly to the printer.  I turned the printer on, the little screen on the printer lit up I touched the arrow to go to the next screen of menus. I touched "Set Up"  then scrolled down through the choices. I picked "Preferences". At the bottom of the list was.............. Media Width/Type Sensing (ON)............I promptly turned it (OFF) ......................I am printing as I was told I would be able to do prior to buying. I am not getting that anoying screen  "Paper Mismatch" . The printer is printing now on my 12 x 12 stock regardless of the type. ie: cardstock, plain paper, colored paper, construction paper. I hope this helps some of you out there.  Clearly HP was of "NO" help to me. I have read that others are installing HP 7000 drivers etc.  I've solved the problem without going to those lengths, no thanks to HP.

  • How can I scan a document to PDF in Windows 7 Professional

    I have a Canon MX892 which I previously used with Windows XP. I was able to scan documents to PDF very easily using the Canon Solutions Menu EX.  I am now using Windows 7 Pro 64. I downloaded the associated version of Canon Solutions Menu EX, but it is completely different from the Windows XP with far less functionality.  Is there some way to scan documents to PDF with Windows 7 Pro?

    Hi daberg,
    There is a program called MP Navigator that comes with the printer that can assist you with scanning a document in as a PDF file.  Once you are in the MP Navigator program, please follow these steps to scan and save a document in PDF format:
     1.  When MP Navigator opens, click on the ONE-CLICK option at the top of the window.
     2.  Click on the SAVE AS PDF FILE button.
     3.  Place the document you want to scan on the Platen, then select your Document Type (either Color or Black and White Photo or Document), Size, and Resolution.  
     4.  In the FILENAME section, the default name for the file will be IMG; you can change this to something else if you would like by highlighting the IMG and then typing over it.
     5.  In the SAVE IN section, you will see the folder path and location that the file will be saved to when you scan it; if you would like to change the location, please click on the SPECIFY button and select the location where you would like the file saved to.
     6.  Below the SAVE IN section, there is a checkbox titled SAVE TO A SUBFOLDER WITH THE CURRENT DATE.  If you leave this checkbox checked, then whatever folder location you select will have a folder with the current date of the scan placed in it, and inside of the currently dated folder will be the file that you scanned.  If you do not want to have the program create the subfolder, please uncheck that box.
     7.  Click the green SCAN button.  Scanning starts.  When scanning is completed, the file will be saved in the location you specified.
     8.  You can then close out of the MP Navigator program and go to the location where you specified the file to save.  You should find the PDF file in that location.  
    Hope this helps!
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Duplex printing in an Officejet 7110 wide format printer

    Hi to the forum. I just purchased an Officejet 7110 wide format printer. I am trying to print both sides of the paper ( duplex ) manually as I have done with other HP printers but the print preferences do not have a "layout" tab and there is no other place I can find where I can select "print both sides".  I can't do the old trick of manually typing in the odd numbered pages in the print dialog box since there is no option to type in multiple pages, just a range of pages.  This is strange, since every printer I have ever use in the last 10 years allows simple duplexing by printing out the odd numbered pages, fliping the stack over and then printing out the even numbered pages. I can't believe that this new printer won't do that. What am I missing?

    Hello Stargeezer63, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing scan issues.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Custom paper size with HP Officejet 7500A Wide Format e-All-in-O​ne Printer

    I am wanting to print on a paper size 12x18.  I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer.  Is there another driver which I can download which would allow me to enter custom paper sizes?

    I am wanting to print on a paper size 12x18.  I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer.  Is there another driver which I can download which would allow me to enter custom paper sizes?

  • How do I get my Macbook Pro to print with HP Officejet 7500a Wide Format printer

    My Macbook Pro (Retina Display) seems to have a problem to print with the HP Officejet 7500a - Wide Format printer - Is it the OS X 10.10.2 causing the problem. It works when connected to the USB cable - but wireless print is a problem.

    let's see-on printer control panel, you've pressed the right arrow, then "network" then "wireless" then "wireless setup wizard" then OK,
    and the wireless capability has been turned on, yes? (I didn't know you could turn it off) -either press the wireless button, or press setup on the printer's control panel, then wireless menu, then touch "On". A blue light should be lit up.
    Failing that, restart the wireless components-turn off router, then printer, then turn on router and then turn on printer.  dunno what else to suggest
    apparently, you can do a wireless test from the printer-right arrow, then network, then wireless, then wireless network test.. .
    also see if there are any updates for your printer-there has been a firmware update for this printer from  2012-try that, there is also a software update for 10.10 apparently it adds direct wireless printing...
    JB

  • Officejet 7000 Wide Format 809a

    How do I get a replacement external power supply for the HP Officejet 7000 Wide Format 809a printer. I have followed the HP on line video to do a reset and check on the power supply and believe that the ext'l power supply is dead. Printer was last seen to be working as expected.  Any Clues - I've got nothing 

    Hi,
    Probably you only need the following part:
    You can buy from:
       http://www.amazon.com/HP-AC-Power-Adapter-0957-2271/dp/B004ZVQ3MO
    Or use part # check other online stores incuding eBay>
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • OfficeJet 7000 Wide Format Printer

    I would like to buy the OfficeJet 7000 Wide Format printer if it meets my needs.
    I want to be able to print addresses and some small graphics onto 9X12 catalog envelopes so as to not need labels.  Does anyone know if this would work?
    Thank you!

    Hi AndersT,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Officejet 7000 Wide Format Printer and not working with Windows 8. Here is a link to the HP Print and Scan Doctor. The HP Print and Scan Doctor will run a check on your system and download the appropriate software for you version of Windows. It will help you connect the printer and the computer to the same network.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Is there a plugin for CS6 that I need to download to get my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro that is running my CS6 program?

    Is there a plugin for CS6 that I need to download to get my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro that is running my CS6 program?

    HP Officejet 7612 mac updated drivers. You can download link.

  • HP Officejet 7500A Wide Format e-All-in-One Printer - E910a

    HP Officejet 7500A Wide Format e-All-in-One Printer - E910 scaner & copy not workser:-MY4C8510F9 

    Hello bondcip ,
    Welcome to the HP Forums.
    I see that you are having an issue when attempting to Print on A3 paper.
    What program are you printing from?  Does this happen with Microsoft word or emails?
    Run the HP Print and Scan Doctor and let me know if it finds any errors and what they are.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • No 11x17" Paper Selection on 7610 Wide Format Printer

    I have a 7610 wide format printer and would like to print to 11x17" paper, but there is no such selection that I can see. I have the latest drivers. Is there something I'm missing?

    X-23 ....Outstanding, your posts saved me. Nicely done, sir  
    Thank you!!!

  • Blink the catridge led one by one in officejet 7000 wide format

    When send the test page the printer become offline and the led of catridge is blink one by one.Please suggest to how to resolve it.

    Hello , I may be able to help you with the blinking lights on your Officejet 7000 wide format printer. Using the Blinking Lights on the HP Officejet 7000 (E809a) document I found out that the light sequence you described is related to the printhead installation. To make it easier for I have copied the suggested steps here for you; Solution One: Check the printhead installation
    Use the following steps to make sure the printhead is correctly installed.
    Step one: Remove the printheadMake sure that the product is on.Lift the top cover. The carriage moves to the center of the product.
    Figure : Open the top cover
    Wait until the carriage is idle and silent.Disconnect the power cord from the back of the product.Remove the cartridges. Press the tab on each cartridge, and then remove each cartridge from its slot.
     NOTE:Do not leave the cartridges outside the product longer than 30 minutes. Doing so can result in damage to both the product and the cartridges.Lift the latch handle on the carriage until it stops.
    Figure : Lift the latch handle
    Lift the printhead straight up to remove it.
    Figure : Remove the printhead
    Step two: Reinstall the printhead
    Reinsert the printhead. Make sure the green and purple blocks on the sides of the printhead align with the corresponding color blocks on the carriage; green to green, purple to purple.
    Figure : Insert the printhead
    Carefully lower the latch handle before reinserting the cartridges.
     NOTE:Leaving the latch handle raised can result in incorrectly seated cartridges and printing issues. The latch must remain down to correctly install the cartridges.Figure : Lower the latch handle
    Reinstall the cartridges. Using the colored shape icons for help, slide the cartridges into their appropriate slots until they snap into place and are seated firmly in the slot.Close the top cover.Try printing again. You could also try the steps in 'Printhead Problem' or 'Printhead Appears to be Missing or Damaged' Displays for HP Officejet 7000 Wide Format Printers.  If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options.  Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.    Thanks, 

  • Officejet 7000 Wide Format printing birds

    Hello my new HP friends.
    I have an Officejet 7000 wide format printer, connected to a jetdirect box to print via NDPS. The people in the office are complaining that the printer is printing out 'little birds'. These are of course the birds on the alignment pages. Apparently it prints 2 of these per day.
    Why is the printer doing this every day? The pigeons are starting to mount up.
    Thanks,
    Phil

    Hello MerlotLady,
    The lines are indeed clearly visable and look like they are caused by the inkt not bleeding very well through the paper. In this case I would recommend using another paper. I checked the HP website for you and HP recommends using advanced paper. So any kind of HP Advanced Paper will do, either glossy or high gloss as long as it is from the HP Advanced line. A copy of the recomendation below. If this will not solved the problem, best thing to do is contacting your local HP support. Let me know if it helps.
    "Advanced photo paper
    Best for printing with HP 02, 38, 60, 110, 564, 920, or 940 inks; you get vivid, instantly dry, smudge- and water-resistant photos"
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Officejet 7500A Wide Format Printer from IPad

    I would like to print 11" x 17" documents to our HP Officejet 7500A Wide Format from an IPad without access to a wireless network.  I have downloaded the HP ePrint and PrinterControl apps and they don't have the 11" x 17" option.  I was told by the HP Help Center that I need a 'third party' app.  Anyone have any suggestions?

    Unfortunately there is no way to print to the Officejet 7500A using your iPad without having access to a wireless network. The wireless network is how the iPad and printer comunicate with each other. If neither devices have any kind of network connection, then there is no way possible for them to communicate. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I am trying to scan a document into PDF format but PDF is not coming up as an option. What can I do?

    I am trying to scan a document into PDF format but PDF is not coming up as an option. What can I do?

    Can your scanner software create PDF documents?

Maybe you are looking for