Officejet 8600 Pro and Windows Server 2003 (32 bit)

The company I am consulting for purchased three 8600 Pro printers to replace three older and non-working printers. They are still using XP Pro on their workstations and running Windows Server 2003 (32 bit version) on a file server and data server. All of the workstations have the drivers for the 8600 installed and are printing with no problems through the network. I checked the driver page on HP's site and there are no drivers listed for the 32 bit version of the server OS, only the 64 bit version. I need to install the printer drivers on these servers to be able to print reports without having to purchase another printer. Has anyone found a workaround to this problem or do I have to install one of the older printers in order to print and fax from the servers? I really can't shut down these servers in order to reinstall the 64 bit version of the OS.

Hi,
Install the software using the command prompt, the software do supported on Windows Server 2003 but its installation process is different.
Follow these steps to install the printer on the server:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03351547&lc=en&product=4323659&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Acrobat 9 pro support windows server 2003 32bit?

in the acrobat 9 pro readme file,I see the system requiement:
Windows Server® 2003 (with Service Pack 2 for 64-bit);
my question is that does acrobat 9 pro support windows server 2003 32 bit?
I have install it at windows server 2003 32bit,
but when i open it, a message box
"Licensing for this product has stopped working"
i have try the solution in kb405970, and can not resolve it.
so manybe really it doesn't support windows server 2003 32 bit?

John makes some very good points but I would like to clarify one thing from his post: you are planning three migrations:
1. From 32bit -> 64bit
2. From Windows to Linux
3. From Oracle 10gR2 to 11gR2
The second of these is the one most liekly to give you grief. You certainly should not attempt to combine it with a database upgrade. Either move the database to RHEL and then upgrade it, or upgrade it on Windows and then move it to the new server.
Of these, the first is the least controversial. So it's a nice point whether it is worth upgrading from Windows 32bit to Windows 64bit prior to moving to Linux.
Cheers, APC

Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

We have a report package that generates customised reports
We generate the PDF's by simply "printing" to the Adobe PDF printer
In Windows XP Pro (32 Bit) the report creates the PDF perfectly
In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
With thanks
Mark

I think it will work fine if you use the "Enterprise" authentication option. It may have dependencies on 32 bit components. So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS. That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels. I'm not sure if that is considered "full support".
We are trying to use the LDAP authentication option, but that tab is disabled. Other tabs such as Active Directory and WinNT are disabled as well. There maybe another component that we must bring down to 32 bit processing.
Is there a way to enable the LDAP authentication configuration tab?
thanks

Which VMware support Windows 7 as Host and Windows Server 2003 as Guest OS

Folks,
Hello. I need to install PeopleSoft PIA in Windows Server 2003.
Because my laptop is preinstalled Windows 7 Home Premium Editon and cannot dual boot multiple Operating systems. I have to install VMware in Host Windows 7 and then install Windows Server 2003 as Guest OS for PIA.
I have installed VMware Server 2.0.2 into Host Windows 7 and Windows Server 2003 as Guest OS. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333/ui cannot display any more.
I have found that Windows 7 is not a supported Host Operating System for VMware Server 2 and strange thing might happen anytime. I found that "VMware Player 3" is fully supported Windows 7 as Host OS but is not supported Windows Server 2003 as Guest OS.
Does any folks know which VMware product support Windows 7 as Host OS and Windows Server 2003 as Guest OS ?
Many thanks in advance.

Hi,
Based on my research, I would like to suggest the following:
1.
Ensure the printer is compatible with Windows 7 and Windows Server 2003 and the drivers are up-to-date.
2.
Try the following method:
Printers that use ports that do not begin with COM, LPT,
or USB are not redirected in a remote desktop or a terminal services session
Hope this helps. Thanks.
Regards,
Nicholas Li - MSFT
That doesn't apply to Windows 7 Machines. I'm having the same problem as Acer_, I have a RDP Session from a Windows 7 Machine to a Windows XP machine and the local printer was available a few days ago but isn't anymore. The drivers are installed on both PC's
and are compatible with Windows 7.

Installation problem with windows server 2003 64 bit

I downloaded all hyperion components from e-deleivery for windows server 2003 64 bit when i tried to install it a message said that some component are not compatible when i removed stratigic finance and FDM components the installation started and completed .in the configuration phase many components failed to configured and here's a copy of the log file:
(Nov 21, 2010, 02:25:51 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Nov 21, 2010, 02:30:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NumberFormatException: null
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.valueOf(Unknown Source)
     at com.hyperion.hit.registry.ServiceComponentImpl.getPort(ServiceComponentImpl.java:45)
     at com.hyperion.hub.HubAppServerDeployer.checkOpenLDAPFromRegistry(HubAppServerDeployer.java:282)
     at com.hyperion.hub.HubAppServerDeployer.updateOpenLDAPPort(HubAppServerDeployer.java:175)
     at com.hyperion.hub.HubAppServerDeployer.preDeploy(HubAppServerDeployer.java:113)
     at com.hyperion.cis.config.AppServerDeployer.preDeploy(AppServerDeployer.java:205)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:604)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:41:18 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:43:35 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.awb.config.AWBDBConfigurator, ERROR, Error:
java.lang.NullPointerException
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.hyperion.awb.config.PIRegistartionXMLWriter.updateHubDetails(PIRegistartionXMLWriter.java:265)
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:249)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:275)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, Error occured in deRegisterOldProductInstance(): null
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, ERROR:
com.hyperion.cis.config.AppDeployException: CMS Client cannot be created
     at com.hyperion.awb.config.AWBAppServerDeployer.publishBPMAInstanceDocument(AWBAppServerDeployer.java:704)
     at com.hyperion.awb.config.AWBAppServerDeployer.registerProductInstance(AWBAppServerDeployer.java:796)
     at com.hyperion.awb.config.AWBAppServerDeployer.postDeploy(AWBAppServerDeployer.java:350)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:336)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:610)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:50:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:51:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:54:20 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:04 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:16 PM), com.hyperion.essbase.config.EssbaseAgentTaskProcessor, ERROR, Error in executing the script to register Essbase as a service: exitCode = 1
(Nov 21, 2010, 02:58:54 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:15 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:16 PM), com.hyperion.planning.HspDBConfigurator, ERROR, Error happened: Index: 0, Size: 0
(Nov 21, 2010, 02:59:16 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:209)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:03:06 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:05:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:29 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:30 PM), com.hyperion.hfm.config.HfmDbConfigurator, ERROR, Error while configuring HFM DatabaseEntry does not exist for these parameters in tnsnames.ora file.
(Nov 21, 2010, 03:19:30 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.hfm.config.HfmDbConfigurator.configure(HfmDbConfigurator.java:151)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:19:39 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.hfm.config.HfmAppServerTaskProcessor.execute(HfmAppServerTaskProcessor.java:105)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeCustomTask(RunAllTasksWizardAction.java:741)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:188)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
if any one installed hyperion EPMS on windows server 2003 64 bit please i need your help
thanks in advanced
Edited by: eng3m on Nov 21, 2010 3:32 PM

Hi,
EDGE/Crystal Reports Server and Enterprise are no native 64bit applications. That does mean that they only run in 32bit mode. But you can install it on a 64bit hardware with a 64bit OS.
Regards
-Seb.

ERROR FRM-41211 Windows server 2003 64 bits

I install Forms&Reports 6i patch 17 on windows server 2003 64 bits an i get all times FRM-41211. The report background service is open but i don't see anything in the log.
I test the call to the report with RUN_PRODUCT and RUN_REPORT_OBJECT and the result is the same.
Anybody can help me?

Post Author: ME-DSZ
CA Forum: Deployment
Until yet BO doesn't support x64
http://technicalsupport.businessobjects.com/cs/forums/thread/12284.aspx
I found in Google following:
http://diamond.businessobjects.com/node/18657
http://www.thedatafarm.com/blog/2008/03/18/CrystalREports2008ServicePackProvidesIntegrationWithVS2008.aspx
Is this correct. Does "Crystal Reports 2008 Service Pack 0" supports (Full) x64 systems??? But i suppose that it will not work in IIS 7.0 on Windows Server 2008 x64!?
I'm actual works on moving all my reports to Reporting Services, because BO gives no information about the support for x64 Systems. They say, that SP 1 of CR 2008 could support x64. But how long do loyalty customers wait for this? I do wait enough...
Greetz

Laserjet CP2025 share issue (64-bit drivers from Windows Server 2003 32-bit).

Hi,
We are migrating our Desktops from XP 32-bit to Windows 7 64-Bit and I'm trying to update all of our printer drivers on our Print Server (Windows server 2003 32 Bit).
I am adding the new drivers by opening up each printers properties on the print server, going to Sharing and then add new driver and directing it to the relevant folder for the 64-bit drivers for the printer.
Every printer (HP, Panasonic, Brother) has worked so far, except for the HP Laserjet CP2025. The Net Express installer doesn't work. Nor do the Universal Printing Drivers (PLC 6). Does anyone know a way around this?
Thank you.

Can anyone help with this? I'm in a difficult position with this. Any help would be appreciated.

Incorrect link for "Oracle9i Release 2 for Windows Server 2003 (32-bit)

Hi. Go to here http://www.oracle.com/technology/software/products/oracle9i/index.html
Then, under "Oracle9i Release 2 (9.2.0.1)", try to download "Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit). It just gives you a patch. It's not the correct link. Where is the full CD images!
Compare this to the 64-bit version under "Oracle9i Release 2 (9.2.0.2). This does have 2 big CD images.
Can you fix the link? I need the software for Windows Server 2003 (32-bit). Thanks.

Yes, it's a little confusing but it's all in the release notes on that page. Basically, you need to install 9.2.0.1 for WinNT/2000 first and then apply the patch to bring it up to v9.2.0.3 for Windows 2003.

Installing CE 7.1 in Windows Server 2003 (32 bit)

Hi,
I am trying to install CE 7.1 on Windows Server 2003 - 32 bit. Is this possible on a 32 bit system?
If not, then what is the alternative?
I cannot install CE 7.1 on Windows XP as the DB i am using is SQL Server 2005 which cannot be installed on Windows XP.
Plz give me the possibilities.
Thanks in advance
Roshan

A 32 Bit Systems seems to be the only way to go. As I said in the other thread, the installation chrashed during the Installation on a Win 2008 64 Bit system, it works fine on a 2008 32 bit one.
cya,
Matthias

Acrobat 8 Professional and Windows Server 2003 R2 Issue

Hi
Our customers using Adobe Acrobat 8 Professional on Windows server 2003 R2 SP2. It works some period of time but then application stops working with this error and cannot start anymore:
Faulting application Acrobat.exe, version 8.1.0.137, faulting module Checkers.api, version 8.1.0.137, fault address 0x000021a2.
What can be the problem? There is nothing in the knowledgebase.
Regards,
Jelena

Hello jordixip,
You can connect your Mac to Terminal Services using Remote Desktop Connection Client . You need a license, the client software, and turning on the appropriate bits on the server. It is in Micro$oft-ese, but the overview is here.
Good Luck!
Zubin
iMac G4 Mac OS X (10.3.9) Mac OS 9.2 & earlier, Win2k Pro & Server

MS-6337-LE5 (815EPT) and Windows Server 2003

Just out of curiosity, will this board work with Windows Server 2003?
I'm inclined to think not.
Servers generally require special memory and multiple processors, but I figured I'd ask anyway. My boyfriend, who also uses this board, is thinking of upgrading to Windows Server 2003.
If that is not possible, he wants to go with Windows 2000 Pro instead. He does not care for XP wants to stay away from it.

I use Google search and the 1st result hits the bullseye .
There you go : Windows 2003 Server System Requirements Page.

Flex and Windows Server 2003 and MSSQL

Hi everyone,
I tried to connect to MSSQL using PHP. I did not get any
error message but the only problem is when I try to test the
problem, I get this error message. Everything works fine on my
local computer "developer", but when I try to program and test on
my Windows Server 2003, I get this error message:
ReferenceError: Error #1069: Property loginsuccess not found
on String and there is no default value.
at index/::checkLogin()
at index/__login_user_result()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc.http.mxml::HTTPService/
http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::resultHandler()
at mx.rpc::Responder/result()
at mx.rpc::AsyncRequest/acknowledge()
at ::DirectHTTPMessageResponder/completeHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
Can someone please help me, I really need to figure this out
for my company.

a string value is being read checkLogin() when its expecting
an object with property loginsuccess.
maybe its a typo or something in your code.
for example you may have place:
var.loginsuccess == "loginsuccess";
in which it should be:
var == "loginsuccess";

Tiger 10.4.4 or 5 and Windows Server 2003 Services For Macintosh unstable??

We are running these tested Mac clients here:
macMini 1.5Ghz 10.4.5
G4 Quicksilver 800Mhz 10.4.4
G4 Dual Mirror PowerMac 10.4.4
They mount volumes on these servers:
Dell Windows Server 2000 (SFM)
Dell Windows Server 2003 (SFM)
Xserve G4 OS 10.3.9 Server
Macs sleep settings are this:
Computer sleep=1 hour
Display sleep=1 hour
Hard drive=sleep
Symptom:
When the Mac goes to sleep, the 2 Windows Mac File servers volumes are
disconnected. Upon wake, the error message stating they were disconnected are waiting.
The Xserve volume is untouched. This should not be a problem
since the Windows servers are running Appletalk via IP not
native Appletalk protocol.
Comments:
Might be related to the lookupd bug in Tiger? http://www.macintouch.com/readerreports/macosx1042/topic3108.html
Here’s the system log from the macMini: (13:47 is when I woke it and manually mounted the volumes)
Feb 23 09:37:22 M00XXX /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: ***********************************
Feb 23 13:14:13 M00XXX kernel[0]: AFPSleepWakeHandler: going to sleep
Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
Feb 23 13:14:24 M00XXX configd[32]: AppleTalk shutdown
Feb 23 13:14:25 M00XXX configd[32]: AppleTalk shutdown complete
Feb 23 13:14:28 M00XXX launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[88]: exited abnormally: Hangup
Feb 23 13:14:28 M00XXX configd[32]: posting notification com.apple.system.config.network_change
Feb 23 13:47:06 M00XXX kernel[0]: System Sleep
Feb 23 13:47:06 M00XXX kernel[0]: System Wake
Feb 23 13:47:06 M00XXX kernel[0]: Wake event 0020
Feb 23 13:47:08 M00XXX kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Feb 23 13:47:08 M00XXX kernel[0]: USB caused wake event (OHCI)
Feb 23 13:47:08 M00XXX configd[32]: setting hostname to "M00XXX.local"
Feb 23 13:47:08 M00XXX configd[32]: AppleTalk startup
Feb 23 13:47:10 M00XXX kernel[0]: AFPSleepWakeHandler: waking up
Feb 23 13:47:11 M00XXX configd[32]: AppleTalk startup complete
Feb 23 13:47:12 M00XXX configd[32]: posting notification com.apple.system.config.network_change
Feb 23 13:47:12 M00XXX lookupd[7515]: lookupd (version 369.2) starting - Thu Feb 23 13:47:12 2006
Feb 23 13:47:12 M00XXX configd[32]: setting hostname to "m00xxx.secret.com"
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/VOL1
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received VQ_DEAD event (32)
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL1', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-1.2c000009', dead
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL1, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL2', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-2.2c00000a', dead
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL2, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 found 2 filesystem(s) with problem(s)
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Asura_Queues, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/Asura_Queues', from 'afp_3QgJ7Z2s2fVR2flF2I2ZlbNQ-1.2c00000b', dead
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received unknown event (48)
Feb 23 13:49:54 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/Asura_Queues, pid 7519
Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL1, pid 7520
Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL2, pid 7520

My SMB share get disconnected while my Powerbook was still running.
Errors in system.log:
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 received VQ_DEAD event (32)
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 type 'smbfs', mounted on '/Volumes/backup', from '//HALO;CYONG@PEANUTS/BACKUP', dead
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 found 1 filesystem(s) with problem(s)
Anyone else having the same problem?

Crystal Reports 9 and Windows Server 2003 sp1/sp2

Post Author: jnribeyrol
CA Forum: General
Hello,
due to security updates in my company, we have to upgrade from Windows Server 2003 to sp1 or sp2.
I haven't been able in the support to find out if there was any problem with Report Access Server on these SPs.
Can somebody help me.
regards

CR XI is past it's end of life. You can upgrade to CR XI R2 for free.
Go to: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Typically this is due to DEP, search forums for more info on how to configure it as well as your Anti-virus and/or Firewall may be stopping CR from running. You also need full Admin rights to install all components.
Thank you
Don

PSUS4 and Windows 7 and Windows XP and Windows Server 2003

I have a small domain network with Windows Server 2003 , Windows 7 desktop, Windows XP desktop. I have an HP LaserJet P3005 printer. I need to be able to print to the HP printer from all of the computers (server, Win 7 and win XP). I have a PSUS4 print server. Is there a way to setup the PSUS4 so that my server, Win 7 and Win XP computers could print to the HP printer? For example, If I setup the Print Server on the XP computer with TCP/IP port, could I share it to the server and Windows 7 computers?

Do you have any router or switch?
Or all the computers are connected to windows server through a switch?
PSUS4 must be connected to the router or the DHCP server so that it will get IP address and all the computers will be able to print.

Officejet 8600 Pro and Windows Server 2003 (32 bit)

Similar Messages

Maybe you are looking for