Officejet 8600 pro plus time zone issue

has anyone successfully set the time zone on the Officejet 8600 pro plus? There's a webpage for the device to setup the local date & time - it has a nebulous button to 'set the time zone to the same as you computer' or something like that.. I can't get it to work under Win7 IE or firefox - the printer seems to always be stuck in UTC. That means I have to set the printers local time to UTC to make the timestamps of email scans appear correct. Any ideas? It seems like older officejets had an option to explicitly set the time zone from the device's webpage but that's gone. BTW.. I've upgraded to the latest firmware (v CLP1CN1150CR - 15-feb-2012), but the problem persists.

You should be able to do that via the LCD panel from the printer.
Setup->Tools->Preferences
Setup is in second page after the home screen.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Similar Messages

Unable to install HP Officejet 8600 Pro Plus Driver on MacOS Maverick

Hi,
I have not been able to install HP printer driver on my Mac.
printer model: HP Officejet 8600 Pro plus
operating system: MacOS Maverick 10.9.3
I have tried all the advices found in the forum including deleting all the old HP files etc and still gets the following error message.
Regards

Hi HugeLau,
I would like to help you successfully install your printer software onto your Mac running mavericks. I can't say for sure what has caused this issue, but I am sure the steps below will help you to resolve the issue;
Scrub/ Uninstall
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
* Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
Click uninstall.
Remove Apple HP Update
From the computer desktop, double-click the Macintosh HD  icon.
Double-click the Library folder.
Double-click the Printers folder.
Right-click the HP folder, and then select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Double-click the PPDs  folder.
Double-click the Contents  folder.
Double-click the Resources  folder.
Locate your printer in the printer list, and then right-click on your printer and select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Click the Trash icon on the taskbar, click the Empty  button, and then click OK to empty the trash.
NOTEBy clicking OK, all items in your trash will be permanently deleted from your computer. To delete one item in the trash, click that item to highlight it, and then click OK.
On the upper-left corner of the computer desktop, click the Apple menu icon, and then click System Preferences on the drop-down menu.
Double-click Print & Scan.
In the Printers list, click your HP printer, and then click the Minus button to delete it.
Restart the computer and now you have a fresh start.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. > HP-Inkjet-SW-OSX-Mavericks_v12.34.37.dmg
When you add the printer, please ensure you are using the HP driver, not the AirPrint driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if this resolves the issue. thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet 8600 pro plus

Hi,
recently, I bought HP Officejet 8600 pro plus, and its firmware was CKP5CN1344ER, and I'd like to update its firmware into the version CLPXXXXXX, but in the HP Official site only supports the firmware version CLP1CN1322CR, that cannot do anything.
question:
1. can't I update CKPXXX into CLPXXX version?
2. How can I get the recent firmware support from Official site?
Thank you for your help,

Hi jxj9848,
The codes are different depending on how the unit received its last update, so don't worry about the different codes. The code you have CKP5CN1344ER is the latest version that was released through the Web Services menu via automatic updates. Is there a reason you were trying to obtaining an update? Are you experiencing an issue that I may be able to help you with?
If you require further assistance please post back with some additional information including your operating system and version, Mac or Windows?
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Looking for OfficeJet 8600 pro plus replacement paper trays

Where can I purchase replacement paper trays for the OfficeJet 8600 Pro Plus printer?
I am NOT looking for the add-on paper tray unit, but a replacement for the primary tray. We shuffle various types of paper and envelopes in and out of the tray throughout the day, and we would instead like to keep several extra trays loaded with specialty paper to reduce wear on the primary tray.
Suggestiosn?
Thanks!
This question was solved.
View Solution.

I searched in the online stores available by HP and was unable to find this part. However, I was able to find that the part is available through HP Tech Support by calling in.
Click here to access the full list of HP Tech Support contact numbers.
The part number is CM749-60036 for the main tray assembly for the Officejet Pro 8600 Plus. This part is, currently, around $25 usd, but prices are subject to change.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Scan to computer as PDF for HP OfficeJet 8600 Pro plus e results in a single pdf doc.

Hello. I have previously scanned docs to my computer running Windows 7 Ultimate using this printer with no problem. However, I think I did them as "everyday" format. Today I had 5 documents to scan to computer so I could have elec copies and also could attach them to emails. When I was done with one doc the screen asked if I had another to scan. I clicked "yes" rather than done. To my dismay all the docs came out fine as PDF on my computer, but they were all connected as a single doc.??? How do I do multiple can to computer as PDF so they result in separate docs?
Thanks

Hello @mjomega,
Welcome to the HP Forums!
I understand your Officejet 8600 is scanning single documents, instead of multiple documents. I will do my best to assist you! When scanning multiple pages, it's a lot easier to perform this option from your computer using the HP software.
I am going to provide a HP document on How to Scan: Windows 7. Click on "How to scan multiple pages into a single file". This will allow you to scan from the Printer Assistant.
Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

How do I print in Black and White only (greyscale) with my HP OfficeJet 8600 Pro Plus

Apple OSX Lion, MacBook Pro
Product Name HP Officejet Pro 8600 N911g Product Model Number CN579A Product Serial Number {Removed for privacy} Service ID 22112 Firmware Version CLP1CN1150CR Total Page Count 236 Country/Region USA

Hope you a having a great day, denrgj
I am reaching out to probe if you still experience this issue. If you are, I will do my best to assist you.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy,
will be deeply appreciated.
Thanks
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Hp officejet 8600 pro plus. Scan to email suddenly not working.

Hi.
I can't use the 'scan to email' function any longer. It states the email username or password is incorrect. I have checked the gmail settings are correct:-
smtp.gmail.com
port 587 and have tried 465 too.
always use secure connection (ticked)
SMTP AUTHENTICATION
SMTP server requires authentication for outgoing e-mail messages
SMTP User ID(MY EMAIL ADDRESS ENTERED)
SMTP Password
(MY EMAIL PASSWORD)
Am at a loss as to what it could be. Any ideas folks.
Cheers.

Hi,
Ensure the 465 port is selected with the SSL mark checked.
As well verify Gmail's security settings, some latest settings may block the printer from connecting:
Open the following URL and ensure you are connected with the same account being used for your printer:
https://www.google.com/settings/security
Ensure that 2-step verification is set as Off, change it if required.
Ensure that Access for less secure apps is Allowed, change it if required.
Now try testing the outgoing email profile settings from the printer homepage or the HP software.
Please let me what happens,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Does the Officejet 8600 Pro Premium N911n printer perform auto tray selection?

I have an Officejet 8600 Pro Pemium N911n printer, CN577A with two trays. My Operating Sysem is Win8,64bit,there are no error messages, no system changes.
The HP Officejet Pro 8600 e-All-in One series User Guide states that By default, the printer draws media from Tray1.If Tray1 is empty, the printer draws media from Tray2(if it is installed and loaded with media. I have Tray lock disabled ,Tay1 the default Tray and Automatic Tray Selection enabled.Prior to making these selections,I contacted HP support via email to report that this option was not working. I received a response that there is no method that will automatically select a tray when one tray is empty. The User 's manual states otherwise..This option might not work but it is part of this series of printers. I have both trays loaded and I will determine if it works after Tray1 is empty. Does anyone have one of these printers and the auto Tray function works? Thanks.
This question was solved.
View Solution.

Hello wardell1,
Please take a look at this document and let me know if the troubleshooting steps help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Unable to Wireless Print to OfficeJet 8600 Pro with Mac OSX 10.5.8

I am running MacBook Pro with OSX 10.5.8 and I am unable to print wirelessly to my new OfficeJet 8600 Pro.
I can setup the printer just fine, but when I send a job to print, it just sits in the queu and does nothing after "processing" the pages, etc.
I've tried a few different setup installers, including this one.
It's a slightly older mac (2.3 GHz Intel Core 2 Duo) running OSX 10.5.8.
Any advice?
Thanks

Hello dpipitone,
Welcome to the HP Support Forums! I understand you are having some problems printing and scanning wirelessly on your HP OfficeJet Pro 8600 with your Mac running 10.5.8. When you installed the software and drivers for your 8600, did it tell you it was successful and print a test page? Also can you let me know the Exact model of 8600 you are using?
I would like you to follow the troubleshooting steps listed here: Print Jobs are Stuck in the Print Queue, once on this page please select your Mac OS X, and continue from there.
Let me know if this was successful, I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Officejet 8600 Pro+ Power-switch lamp cycling bright then dim

My Officejet 8600 Pro+ printer is brand new, and is connected via my wired network. It's working perfectly so far. Wi-Fi and fax are both (deliberately) turned off / disabled & not needed.
The Power-switch has a nice green light to indicate that the printer has "power" OK - and the lamp seems to have two "on" states, namely 'dim', and 'bright'.
The printer seems to go into "Sleep Mode" OK, and the control panel turns off as expected after my preset "Sleep" interval. (I'm not using the scheduling options.) It also wakes-up OK when I send it a print job. Again, everything is fine so far ...
While the printer is in this low-power 'ECO' state, the intensity of the green Power-switch lamp varies slowly between bright and dim, on a roughly 6-second cycle - 3 seconds at 'bright', then 3 seconds at 'dim', and it never stops cycling - bright then dim then bright etc..
BUT ... and here's my question ... should this lamp be staying 'dim' while the printer is asleep?
Or, does the fact that it is returning to 'bright' every few seconds imply that it is somehow failing to STAY fully 'asleep'?
I can't find any clues about this in the printer's manual.
Perhaps I should raise a query with the HP Support folks, but I thought I'd ask here first.
Thanks in anticipation. Edited to add:
I'd be glad to know whether any other Officejet 8600 owner (or the owner of any other Officejet model) sees this same bright/dim behaviour on their Power-switch lamp? Thanks.

Thanks pcwizard, I got the same reply yesterday from my HP Customer Care enquiry, and I'm satisfied now that my machine isn't cycling repeatedly into sleep mode and then 3 seconds later coming half "out" of sleep mode! I know the HP design folks may never look at these Forum entries, but I'd hint to them that perhaps this ambiguous "sleep" indication might be made an optional choice, so that I could choose a steady low-intensity light instead. It's not an enormous issue of course, but in my little "office" space, this Power button is right in my line-of-sight as I work, and - even though I now know that my printer is perfectly healthy - the slowly-pulsing light had become a recurring distraction until I covered it with a little 'disc' of semi-opaque sticky tape Thanks again.Colin

How to cancel a print job on the hp officejet 8600 pro running xp

How do cancel a print or copy job on the Officejet 8600 Pro Premium? There is no "cancel" button on the control panel. Do I have to go through the software? Time consuming -
Thanks!
This question was solved.
View Solution.

scarlattid3,
The cancel button should be located in the bottom right corner of the screen. The only thing is it's not going to show up until you start the print job or copy and then it should appear for you.
Let us know if you are able to find this.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

HP Officejet 8600 Pro - how to change scan resolution presets at the printer

I have an HP Officejet 8600 Pro and wish to scan to email from the printer and wish to change the default resolution setting. I would like to change the default scan resolution so I dont have to remember to change it every time I scan.
If I change it with the HP Windows Printer Assistant software it only seems to change the resolution for this time and only from the computer not at the printer.
Is it possible to change the scan resolution settings at the printer? I cant find detail in the manual or on the printer console.

bvlusa,
Open the Icon labeled Officjet Pro 8600 on your desktop, and then click on Scan a Document or Photo. When the Scan application window opens you can change the Resolution from the drop down menu.
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Calendar Event Invites - Time Zone Issue

Hi all!
I just switched back to BlackBerry from iPhone, and love everything about it so far except one thing: time zone issues on calendar invites.
My work uses an OS X hosted CalDAV server, and I was able to sync my existing calendars to it without issue.
My time zone: Eastern
My coworkers timezone: Central
The Issue: I received an invite from a coworker, and on my Mac, it shows at 1PM Eastern, as it should. The invite was sent for 12PM Central. This same invite appears on my BlackBerry at 7AM Eastern.
Testing completed:
I added an invite on my BlackBerry for 6AM Eastern as a test, and it appeared on my Mac at the correct time without issue.
I added an event on another day from my Mac, and it synced to my BlackBerry without issue.
So it seems that my issue only exists when recieving event invites from others, possibly in different time zones.
My Mac and BlackBerry are both set to Eastern time.
My coworkers Mac and iPhone are set for Central time.
I looked all through the BB settings and cannot find anything that would account for this odd behavior.
I tried a battery pull - same results.
I am on the latest OS available for a Q10: 10.2.1.2976
Can anyone help with this? I would hate to have to go back to iOS for one issue like this, however, an accurate and reliable calendar is critical to my work.
Solved!
Go to Solution.

Try this, for a test.
Set your Q10 to GMT Timezone.
Open the calendar, your invtes should be ~5 hours ahead.
Set your TZ back to Eastern.
Check your specific event mentioned above which was at 7am Eastern.
Is it correct now?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Time Zone issue with 7.0 and DB2

Hi,
We are having a time zone issue with weblogic server 7.0 and DB2 database. I would really appreciate if somebody provides a solution for this issue.
Our db2 DB is located in PST time zone and weblogic server is located in EST time zone.
When we access current timestamp from db2, we are getting PST time converted to EST and EST time zone attached with timestamp value.
I tried to use resultset.getTimeStamp (1,<calendar>), unfortunately this method is not supported in the DB2 driver version I am using.
We want to get same value as returned by db2 with db2 time zone not weblogic server time zone.
And also when we add new record with timestamp column through web service, regardless the time zone value sent by web service client ".Net" ,
Weblogic server converts the java.util.Date value to weblogic time zone and stores in the db.
For example, client sent 17:00 hours CST, but when it gets stored in db through weblogic ws, weblogic converts 17:00 to 18:00 EST and stores in database as 18:00 hours without any time zone. When we read this value back, we are getting it 18:00 EST only not 17:00 CST.
This is fine as long as writing and reading by same weblogic server. If another weblogic server instance in PST time zone read this value, it takes as 18:00 PST.
Due to this our application always shows timestamp hours differently.
Could some body help me to fix this problem, we are getting this problem in production after we moved our DB2 location to different time zone.
Thanks
Balaji

Hi,
Check whether document in the link below is of any use for you..
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFTIM/CAGTFTIM.pdf
Regards
K.M.Arun

Is it possible to use a sprint hot spot as a network connection on HP Officejet 8600 Pro?

Is it possible to use a sprint hot spot as a network connection on HP Officejet 8600 Pro?

@Johndcrum
It's possible to use a hot spot connection but its not recommended. The connection isn't reliable.

Officejet 8600 pro plus time zone issue

Similar Messages

Maybe you are looking for