Officejet G85xi printer errors with Windows office 8

I recently purchased a new PC with Windows 8. I downloaded the most current drivers for my Officejet G85xi. Each time I try to print I get one or two good pages and then the printer stops and an error pops up in the control menu.

I used the G85xi without issues (other than paper supply out) using Window XP on older PC. The printer has not worked properly since it has been connected to HP Envy 700-074 running Windows 8.1. When I am lucky I get 2 full pages of print before "print error" appears. I have tried Printer Doctor, deleting the printer and re-adding it, set higher priority, checking USB 2.0 port connetion, etc. It usually will finish a text document not much more than a single page, but PDF documents are very limited. I have spent hours trying to print one 9-page PDF document. Should I ditch what was a wonderful printer? Should I ditch a new HP PC with Windows 8.1? Even if I buy a new printer, can I trust it will not stop printing on page 2 or 3 in the middle of the page?

Similar Messages

Is the officejet 6600 printer compatible with windows XP

i was wondering if officejet 6600 is compatible with windows xp

Hi,
All supported drivers, including XP, are in the following site:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4323587&lang=en&cc=us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to share 10.6 OSX Server print queue with Windows 7 successfully?

I used Bonjour Print Services for a Windows 7 machine (http://support.apple.com/kb/dl999) to successfully connect to a Mac OX Server 10.6 print queue, and the following message is generated in the print log and CUPS log,
"POST/printers/stormoncecar/ HTTP/ 1.1" 200 2205 Print-Job Successful-OK
There are no errors, however, nothing comes out of the printer. It works for all the Mac OS Client machines, but not for any of the Windows 7 machines.
How to share print queue with Windows 7 successfully?

I'm back on this problem. I thought I would give more details as I still can't print.
Operating System: 10.6.8
Driver for Canon LBP6750 UFRII prints from Mac and prints from Windows 7. However, printing from Windows 7 as you share the printer from your Mac does not print out anything and has no errors.
JOB INFO
Completed smbprn.00000004 Microsoft Word - Document 1 3:43PM Today 3:43PM Name
CUPS > access_log
localhost - - [01/Feb/2012:15:43:33 +0900] "POST /printers/FLOOD_6750_UFR HTTP/1.1" 401 2003 Print-Job successful-ok
localhost - lino [01/Feb/2012:15:43:33 +0900] "POST /printers/FLOOD_6750_UFR HTTP/1.1" 200 2003 Print-Job successful-ok
CONSOLE MESSAGES
2/1/12 3:47:45 PM com.apple.launchd.peruser.501[
200] (jp.co.canon.UFR2.BackGrounder[664]) posix_spawn("/Library/Printers/Canon/UFR2/Utilities/UFR II BackGrounder.app/Contents/MacOS/UFR II BackGrounder", ...): No such file or directory

MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1?

MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1? WINDOWS 8.1 recognizes I have printer attached, but it says flatly "No driver!" I have run all the drivers from CANON and then attached the printer. But, still it doesn't work! Nothing from CANON sez" SETUP...........

Hi mybrojer.
I will be glad to assist you.
The file that you download from the Canon website is .ZIP file. When you select [RUN], it unpacks the setup folder. Please disconnect the printer from the computer and follow the instructions below to install the printer:
Open your [Downloads] folder.
You will see two icons with the name: MF4350_MFDrivers_W64_us_EN.exe. Double-click on the yellow folder icon with this name.
In the folder you will see two listings for [Setup]. Double-click on the [Setup] that has the type as [Application].
The "MF Drivers Setup Wizard" will open. Proceed through the steps and restart the computer.
After restarting the computer, connect the USB cable and allow the installation to complete.
Print a document.
I hope that this information is helpful to you. Should the error persist, or your need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Officejet 8610 printer error

printer 8610 says printer error with blue light flashing telling me to turn the printer off then on....i do that and it is fine for a short time and does it again....i have even unplugged it and turned it back on and it will still do it after a short time

Hey @jewels2,
Welcome to the HP Support Forum. I hope you enjoy your experience here.
I understand you're encountering a recurring error status with your HP Officejet Pro 8610 e-All-in-One Printer. I would like to assist you with this.
Are you able to interface with the printer's touch screen at all, ie. - is it responsive to your touch so that you can access your printer's menus? I have a couple suggestions that might help.
If you're able to use the printer's touchscreen still, try restoring its factory defaults*:
*Note that completing this step will reset your printer's wireless configuration, ePrint address, and other customized printer settings. If you have created a custom @hpeprint.com address it will be permanently erased. For more information on custom ePrint addresses, click here.
From your printer's front panel:
Touch Setup
Touch Tools
Touch Restore Factory Defaults
When you complete this reset you'll need to re-establish your wireless connection (if you're a wireless user) and re-establish your webservices connection if you're an ePrint, Printables, or scan to email user. To do so, simply touch the icon, enable webservices and touch OK to allow for automatic printer updates.
Please let me know the result of your troubleshooting by responding to this post. If these tips fall short I can private message you the steps to complete a semi full reset if need be. If I have helped you resolve the issue and you liked this post, feel free to give me virtual props by clicking on the 'Thumbs Up' icon below.
Thank you for posting in the HP Support Forum and have a great weekend!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
Operating System: Windows Version 8.1 PRO
When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
stop working. Is this printer not compatible with Windows 8.1 PRO? Is there any update for this?

Hey,
HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
Please uninstall your printer's old software then install new one for windows 8.1.
HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

Can the wireless printer work with window 7?

can the wireless printer work with window 7?

Will this wireless printer connect to the AirPort Express Base Station (AX) via a wireless or USB connection?

Cant download itunes, because ' there is an error with windows installer package' please help?

cant download itunes, because ' there is an error with windows installer package' please help?

I am getting the same message when I try to install the latest version of iTunes, I am running on Windows Vista Home Premium. I have tried so many different things to try to correct this and have now completly unistalled it from my laptop..... Now I have no iTunes what-so-ever on it and still can't install it. I found an older versin of iTunes and it installed without any problems, but I can't access it because my library was created on a newer version! Talk about frustrated..... WE NEED HELP!!!!!

HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1

Hello I have problems with my HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1 surround sound receiver conete SPDIF after update from vista 64 bit to windows 7 began this problem
only nomal audio but no support from the surround sound of 5.1 channel SPDIF what the error may attend
I hope you can help me
Sincerely,
Steve

maybe your spdif default properties, in the supported format tab, options there are configured too high for your revceiver???
is there an error code on your receiver? if there is an error code check the troubleshooting section in the manual your receiver came with.
you could also try in windows media center, go to the tasks->settings and click windows media center setup->setup your speakers for 5.1 and hit the test button..
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

HP OfficeJet 7310xi printer error code 0x885e2da6 during startup

HP OfficeJet 7310xi printer error code 0x885e2da6 during startup, will not progress to head alignment or connecting to the network after running for a long time. Fax light blinks exclamation mark blinks as does the power light after the three clicks during power-up. Ink cartridges never move.

Contact HP technical support at 800-474-6836 for more options.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Country-language selector.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?

The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

Printer error with HP Laserjet 6L and Windows 7

I have an old but still functional HP Laserjet 6L (from the late 1990s), which is connected to a new computer running Windows 7 via USB. Windows 7 found the necessary drivers, but I am having frequent printer errors come up in the Printer queue, and the machine refuses to print. The problem is 'solved' when I restart my PC, and the document then prints. However this is a pain, and I obviously don't want to have to restart every time I want to print.
I would be very grateful for any advice on this. Thanks.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Driver for OfficeJet J4580 Not Working with Windows 7 Professional

I am trying to install the driver on a new Toshiba laptop but the driver keeps failing. I have tried the Basic and Comprehensive drivers. After downloading, I get a prompt to extract the driver, then I get an error message that says the file is corrupt, cannot extract. I get the same error message with both drivers. I am downloading the drivers from the HP website. I am using Windows 7 Professional 64-bit. I do not have the printer plugged in (it's plugged into my very old Windows XP laptop and works fine there). I have left e-mail messages to Support through the HP site and have not gotten an answer. Is this printer just too old for my new computer? Do many of the HP printers have problems with Windows 7? Any assistance is appreciated. Thank you!

Hi @OrdinaryHPUser,
Welcome to the HP Forums!
I noticed that you cannot install the driver for your HP Officejet J4580 on Windows 7. I am happy to help!
Full feature software and drivers, are available for this printer on Windows 7. So the printer is compatible. I would recommend to try the following steps:
Uninstall the software. Uninstalling the Printer Software. (Only if the software is partially installed, otherwise you can skip this step.)
Clean boot the computer. How to perform a clean boot in Windows.
Disable any Antivirus programs. Disable Antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Create a new user account. Managing User Accounts and Logins (Windows 7).
Reinstall using the HP Printer Install Wizard for Windows.
Hope this will solve the issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printer error with InDesign CS4

I have the Adobe Master Collection installed on Windows 7 64bit (Pruchased through MS Volume License). Before installing windows 7, the system had Windows Vista Business 64-bit installed and had the same problem, so it is not OS related. Connected directly to the computer via USB cable is an HP Design Jet 130. All programs are able to print to it without any problems including Photoshop (64bit), Adobe Acrobat, Illustrator (32bit), Excel, Word, etc. However, when trying to print a document from InDesign, I get the following error:
print driver host for 32bit applications has stopped working
After click ok, the printer selection box comes up, with the post script printer selected. When you go and try and change the printer to ANY other printer including the DJ130, I get the following error:
Printer selection failed. Restoring the previous selection.
I am still able to print documents from InDesign by saving them as a PDF and then opening them and printing them with Adobe Acrobat Pro, however, I should not have to do this, and this can become very time consuming. The printer is also shared on the network with two other computers and they have no problem printing to it from InDesign. Before I installed Windows 7, I completely un-installed the Master Collection. After Win7 was installed, I re-installed the Master Collection, and I was able to print perfectly from Adobe InDesign. It seems that one of the updates breaks it's printing capabilities with this printer, or at least on this system.
Has anyone else experienced this issue, or are there any other things that I can try to resolve this? I have 8GB of RAM in the system and don't really see switching to a 32 bit OS to be an option as I would loose the ability to use 1/2 of my memory.

I am having the exact same problem. I have Windows 7 Pro 64-bit and Design Premium CS 5.5. InDesign is the ONLY program that will not print to any printer. I get the "Printer selection failed." error every time I select any printer, even the Adobe PDF one. I have a Brother printer, an HP Plotter, and even an Oce copier/printer. InDesign gives the error no matter what printer is selected form its own list. Photoshop and Acrobat do not give me any issues, nor does any of the MS Office programs nor Autodesk softwares. It's only InDesign that fails. Reparing doesn't do anything and reinstalling every printer driver is pointless because it's only InDesign that produces the error.
Does anyone know what to do to fix this?

Officejet G85xi printer errors with Windows office 8

Similar Messages

Maybe you are looking for