Officejet H 470 windows 8.1 driver fails to install
I downloaded the full feature software driver for windows 8.1 for my officejet H 470.
When I run the downloaded exe file the software "cannot find the file" and closes out. it doesn't ask for a CD. It is looking in a temporary file on my harddrive. If I close the message the software closes down and the driver doesn' install. if I ignore the box nothing happens -- the software continues to look for the missing file for ever....
What is the solution?
Cheetah12: thank you for your interest in my problem.
I went back to the supermario advice. If isn't for the same printer nor the same missing file. My missing file is:
File Name: C:\Windows\system3hpzprl40.exe -inf-mPreload_Drivers\Msiexec.exe
However, I did try some of the advice. I ran the L3uninstall.bat [twice]. I definitely do not have any of the old printer files on my new laptop.
I tried to reinstall the updated driver from the HP website and it still will not install.
I have also run the disk cleanup in "administrative tools" [Supermario wrote in "System tools"]
Nothing has worked. I have rebooted my laptop as required and tried installing the driver from HP and I still get the same issue . I have a screen shot of the box if it is of interest to you.
Similar Messages
-
Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine. -
windows computer hard drive failed; data lost. have new blank hard drive. Can I load ipod music and photos back onto new hard drive?
Hi Perilman,
Welcome to the Apple Support Communities! I understand that all of your iTunes media is on an external hard drive and you would like to move that media onto your new Windows computer hard drive. The following article has step by step instructions for this specifically. Part 5 in the External drive section is probably what is going to be most relevant to you.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Part 5: Copy music to your new computer
To copy all your music files (including the library file that holds all your playlists and other settings) to your new computer:
I hope this helps,
-Joe -
Adobe Photoshop CS5 Windows Finnish update files failed to install/load
Adobe Photoshop CS5 Windows Finnish update files failed to install/load.
Loading updates fails at the end of the loading. Tried it yesterday and today same errors. Are the files corrupted at server or how to fix this ?
Adobe Bridge CS5 4.0.5-update
Adobe Extension Manager CS5 5.0-update
Photoshop Camera Raw 6.7-update
Photoshop CS5:n Photoshop 12.0.4-updateupdate by downloading the files directly and then applying them:
pre cc updates: http://www.adobe.com/downloads/updates/ -
USB Console (Serial) Driver fails to install on Windows 8.1 x64
The USB console cable driver v3.1 will not install on Windows 8.1 x64. Had a similar problem with Windows 7 x64 but this was fixed using Greg's (greggar25) excellent step-by-step procedure (see post: https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing).
I am using the driver from this link: http://software.cisco.com/download/release.html?mdfid=282774228&flowid=7442&softwareid=282855122&release=3.1&relind=AVAILABLE&rellifecycle=&reltype=latest
I followed the same procedures I did for Windows 7 and the install goes without a hitch. Reboot and connect the USB cable, opened Device Manager and now I have a COM Port randomly appearing and disappearing with its number incrementing well above 1,000.
A few times while it appeared for a few seconds, I was able to right click on the properties, update the driver and chose Cisco Serial and it settled down but it did not assign a COM port. Then a few seconds later, it starts the disappearing/reappearing thing again.
Anyone have luck getting this to work with Windows 8.1 x64?Hi,
open Device Manager by simply typing the words on the Windows 8.1 Start Screen. The Search Charm opens and click Device Manager in the displayed list.
In Device Manager a new hardware category, CiscoUsbConsoleWindowsDriver, is displayed. It has two components: the Cisco Bus enumerator and the Cisco USB to Serial adapter. Expanding the Ports hardware category shows a new Cisco Serial port.
or
Look into below
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing
1) Install the usb console driver\windows 64\setup(x64)
2) Follow the wizard and accept the defaults
3) Restart the computer (the installer usually says it needs a restart)
4) After restarting the computer, plug in the usb cable
5) The computer should say installing Device driver software and fail at the Cisco Virtual Comm Port00
6) Click the Windows button, right click computer, manage
7) Under Computer Management, Click Device Management
8) Go to Ports (COM & LPT)
9) You should see the Cisco Virtual Comm Port00 with a Yellow Exclamation point on it
10) Right Click on the Cisco Virtual Comm Port00 and select Properties
11) Click the Driver Tab
12) Click Update Driver
13) Select Browse my computer for driver software
14) Select Let me pick from a list of device drivers on my computer
15) Choose the Cisco Serial Driver
16) Device Driver is installed successfully, take note of the com port it is using and enjoy.
HTH
Sandy -
Hard Drive Failed, issue installing windows 7 pro
Hi all, and thanks for the help. So, I have this HP computer that crashed. Unfortunetly I wasn't correctly running backups and something happened to the hard drive. So, I wiped it clean.....
I never had a Windows 7 Pro install disk. So when I went to reinstall Windows I only had a Windows 7 home disc to get it started up. Now that it's up and running, the Windows 7 pro serial number (attached to the tower) will not work to validate Windows as I have Home edition installed under trial right now.
Is there a way to get another install disk, or is there a correct way to reinstall Windows 7 pro with the serial number that I have so that I don't have to purchase another Windows serial?
I tried using Microsoft's windows recovery tool, but because this was an OEM installed product it said to contact HP?
Thanks for the help.Hi:
You can try this trick to turn the files on your W7 Home Premium disk to any version of W7.
http://www.mydigitallife.info/how-to-select-any-edition-or-version-sku-of-windows-7-to-install-from-...
You can also download the free ImageBurn software (another program in addition to those listed in step 1) to create and burn the ISO file you created by following the info above.
http://imgburn.com/
Otherwise you will have to order a set of W7 Pro recovery disks for your specific model PC from HP. -
PC Suite on Windows 7 64Bit driver fails
Hello,
I've got many problems with PC SUITE (last version) when I tried to connect my E75.
I've just installed windows 7 64bit Ultimate edition.
PC suite installs without any problem but drivers fails to install.
when I open PC suite there's no connection. The software updater doesn't work too, and ovi suite either.
I can only connect with E75 via bluetooth. but not with my cable.
I think 64 bit OS could be the problem. I tried to install in compatibility mode(VIsta or WinXP) but nothing change. When I open the proprieties on device manager it says "unable to start the device"
Someone has a solution???
thanksMY friend I do have the same situation with my Laptop Vaio, Windows 7 64 bits, and my E63.
Exact same situation.
What to do?
I guess Nokia should give us a solution to this.
Regards -
Audio driver fails to install on xp 64 bit
hello i have an »HP Compaq dc5850 Small Form Factor PC (ENERGY STAR)
Serial Number: [Personal Information Removed]
Product Number: AM500AW
i installed windows xp 64 bit along with service pack to and i downloaded the xp/2000 adi hd audio drivers from hp's site but when ever i try to install the audio driver i get a message from xp saying the audio driver has failed and no audio codec is installed how do i fix this as i dont think hp has 64 bit xp drivers for download can i use the vista 64 bit drivers please help me out thanks
This question was solved.
View Solution.The Microsoft UAA driver for Windows XP 64-bit must be installed before you install the audio codec.
Here is a location for the audio codec.
Post your results here in your thread.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Hard Drive Fail after install Photoshop CS6?
Hi! I downloaded Photoshop CS6 six days ago. Three days later my hard drive failed... and now can not find the installation. The repair put my system back to a previous time when the computer worked fine. Did this erase the install???
Thanks,
CeCe1019What is your operating system & version?
If Windows, how was the system reset - by System Restore? Or a complete restore from backup?
While a System Restore will leave the installed programs in your Program Files, all registry data and system files will have disappeared. So either way you will have to reinstall. -
HP F380 All in one printer 64 bit driver fails to install
I have a HP F380 All in one printer. I donwloaded the driver for Windows 7 (64 bit). The installation program abbruptly dies with an error
Please advise how I should proceed now.Hello shrijoshi,
I see that you're getting a runtime error when you are trying to install the HP Deskjet F380 on your Windows 7 (64 bit) machine. Please follow the steps listed below:
Hold down the Windows Logo key ( ) on the keyboard and the 'R' to open the run box, type %temp%
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe . If you have a non-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Click Start , and then click Run .
In the Open box, type msiexec /unreg, and then click OK .
Click Start , and then click Run .
In the Open box, type msiexec /regserver, and then click OK
Run Disk cleanup from Accessories\ System Tools
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads .html
Now we can restart the computer
I would now like you to install the software using the HP Printer Install Wizard it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer
Your HP F380 should now be successfully installed, if you run into any problems please let me know.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
U401 touch windows 8 audio driver unable to install error could not find divice for this driver
u401 touch windows 8 audio driver unable to 0wau05w8.exe install error could not find device for this driver
kindly advisehi karthi2lenovo,
Welcome to the Forums.
If the conexant audio drivers from the lenovo website doesn't detect the device, can you try to:
1. Open Device Manager (press Winkey+R > type devmgmt.msc)
2. On the device manager, open Sound, video, and game controllers and Other Devices then check the status (if there's a yellow exclamation mark, error codes, etc.)
3. As an alternative, try this conexant driver from station-drivers:
Conexant High Definition Smart Audio
Version 8.64.59.52 (Win8)
Let me know your findings,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Xperia Z2 driver fails to install.
I have reciently upgraded to the Z2 phone, my iphone 4 was stolen. My issue is that my phone won't connect to my pc.
I have tried a pc at the phone store and it connects, so I know it's not the phone. I have pc companion on my computer as well as what I'm told is drivers for the phone in a downloaded file. I've extracte the drivers into the same file but when I search for the files via update driver computer does not find it even though I'm in the correct folder. I've searched the net for drivers via update driver, computer starts install, then tells me it fails. S1 driver fails (fast boot) D4305 fails (this is another name for the phone not sure if I got the numbers right in this post but I'm close. I've tried rebooting system, unpluging all usb devices, turning off win firewall and antivirus software. I'm not sure what's blocking the installation of the phone drivers. I'm pretty sure if I can get the driver's installed on my ccomputer, I can get pc companion to see my phone. I've got it to connect to my Null, which I assume is my phone, but when I open pc companion It's not connected, probably because of drivers. Tried connecting with phone turned off and on, turning on with up volume key pressed, debugging with developer still can't find thi issue.
Solved!
Go to Solution.I must admit I am running out ways to get around this. The only other things I have seen block this kind of install are below:
1. Do not use a USB Hub.
2. Do you have any MP3 Player software installed for another MTP device?
3. Do you have any camera software for connecting a camera that may also operate in MTP mode?
4. The last option would be to test on another PC if possible to rule out the phone/cable as the problem.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
ID Windows 6.0.4: "Failed to Install"
Hi,
I just downloaded the ID Win 6.0.4 update. When I try to use it on my ID 6.0 installation (Win XP SP2) I get a cryptic "Failed to install" message from the Adobe updater.
Any ideas? I rebooted and tried it again: same results.
Thanks,
LarryYou'll probably have to uninstall and then Run the CS4 Clean Scriptand then reinstall and try again. Make sure you are logged in as an administrator, and turn off virus scanners and other background programs.
-
New printer driver failed to install on Windows 7
Hello everyone,
Yesterday I purchased a wireless printer HP Envy 5530. When I installed the driver on my HP Pavilion mini windows 7(I don't know what the product name is since it is about 3 years old) , it failed. I called the HP printer hotline and spoke with someone in India. He told me there were some errors in my computer and I should pay them $149 to have them fix my computer. I am not sure this is the way that should be, or if there is any other method I can use to solve this problem? Please advise.
Thanks in advance!Hello @greengem
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Load of file from a windows 2003 network drive failed
Hello,
I working on a windows 2003 Server machine with a Oracle database 10.2.0.3.
I must automate a database task that consist in reading tow files from a network drive, load it on database and making some processing on loaded data
I defined entities for use of scheduler but when job with this processing is run it doesn't complete it work
In column additional_info of table user_scheduler_job_run_details I have found this message
CHAIN_LOG_ID="20298", STEP_NAME="LOADZILE", ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
STANDARD_ERROR="SQL*Loader-500: Unable to open file (Z:\ControlCAMarjaZilnic.ctl)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified."
The file is on the network drive and it mname is correct - I am sure of this
What's wrong?
Thanks in advance,
AurelHi,
My environment consist in Windows 2003 Server and Oracle database 10.2.03 database
My job must read 2 files from an network drive - mapped on Z , load files in Oracle database and process data for output on some devices
I build a CHAIN based job
BEGIN
DBMS_SCHEDULER.create_chain (chain_name => 'loadchain',rule_set_name => NULL,evaluation_interval => NULL,comments => 'Loading chain.');
END;
I defined programs : trunc and processing as STORED_PROCEDUREs and sqlldrDays and sqlldrMonths as EXECUTABLEs
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(program_name=>'trunc',program_type=>'STORED_PROCEDURE',program_action=>'XXBLU.xxblu_dex_vanzari_pkg.Truncatelunizile',number_of_arguments=>0,comments=>'Truncate for loading',enabled=>FALSE);
DBMS_SCHEDULER.ENABLE(name=>'trunc');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(program_name=>'sqlldrDays',program_action=>'c:\oracle\product\10.2.0\client_1\BIN\sqlldr.exe',program_type=>'EXECUTABLE',number_of_arguments=>2,comments=>'Loading days',enabled=>FALSE);
DBMS_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(program_name=>'sqlldrDays',argument_position=>1,argument_type=>'CHAR',default_value=>'xxblu/xxblu@dextera',out_argument=>FALSE);
DBMS_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(program_name=>'sqlldrDays',argument_position=>2,argument_type=>'CHAR',default_value=>'Z:\ControlCAMarjaZilnic.ctl',out_argument=>FALSE);
DBMS_SCHEDULER.ENABLE(name=>'sqlldrDays');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(program_name=>'sqlldrMonths',program_action=>'c:\oracle\product\10.2.0\client_1\BIN\sqlldr.exe',program_type=>'EXECUTABLE',number_of_arguments=>2,comments=>'Loading months',enabled=>FALSE);
DBMS_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(program_name=>'sqlldrMonths',argument_position=>1,argument_type=>'CHAR',default_value=>'xxblu/xxblu@dextera',out_argument=>FALSE);
DBMS_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(program_name=>'sqlldrMonths',argument_position=>2,argument_type=>'CHAR',default_value=>'Z:\ControlCAMarjaLunar.ctl',out_argument=>FALSE);
DBMS_SCHEDULER.ENABLE(name=>'sqlldrMonths');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(program_name=>'processing',program_action=>' XXBLU.xxblu_dex_vanzari_pkg.Prelucreaza',program_type=>'STORED_PROCEDURE',number_of_arguments=>0, comments=>'Processing for BlackBerry output',enabled=>FALSE);
DBMS_SCHEDULER.ENABLE(name=>'processing');
END;
This chain has 4 steps : truncatetabsStep,loadDaysStep,loadMonthsStep and processingForDexteraStep
BEGIN
DBMS_SCHEDULER.define_chain_step (chain_name => 'loadchain',step_name => 'truncatetabsStep',program_name => 'trunc');
DBMS_SCHEDULER.define_chain_step (chain_name => 'loadchain',step_name => 'loadDaysStep',program_name => 'sqlldrDays');
DBMS_SCHEDULER.define_chain_step (chain_name => 'loadchain',step_name => 'loadMonthsStep',program_name => 'sqlldrMonths');
DBMS_SCHEDULER.define_chain_step (chain_name => 'loadchain',step_name => 'processingForDexteraStep',program_name => 'processing');
END;
I want to run these tasks sequential
BEGIN
DBMS_SCHEDULER.define_chain_rule (chain_name => 'loadchain',condition => 'TRUE',action => 'START truncatetabsStep',rule_name => 'chain_rule_1',comments => 'Truncate step');
DBMS_SCHEDULER.define_chain_rule (chain_name => 'loadchain',condition => 'truncatetabsStep completed',action => 'START loadDaysStep',rule_name => 'chain_rule_2',comments => 'Load days');
DBMS_SCHEDULER.define_chain_rule (chain_name => 'loadchain',condition => 'loadDaysStep completed',action => 'START loadMonthsStep',rule_name => 'chain_rule_3',comments => 'Load Months');
DBMS_SCHEDULER.define_chain_rule (chain_name => 'loadchain',condition => 'loadMonthsStep completed',action => 'START processingForDexteraStep',rule_name => 'chain_rule_4',comments => 'Processing for Dexterra');
DBMS_SCHEDULER.define_chain_rule (chain_name => 'loadchain',condition => 'processingForDexteraStep completed',action => 'END',rule_name => 'chain_rule_5',comments => 'End of chain');
END;
I enabled the chain
BEGIN
DBMS_SCHEDULER.enable ('loadchain');
END;
I run the chain
BEGIN
DBMS_SCHEDULER.run_chain (chain_name => 'loadchain',start_steps => 'truncatetabsStep',job_name => 'loadchain_run_job');
END;
When I watch user_scheduler_job_run_details I can see STORED_PROCEDUREs programs succeded and EXECUTABLEs (sqlldr based) didn't
in additional_info table I can read - STANDARD_ERROR="SQL*Loader-500: Unable to open file (Z:\ControlCAMarjaZilnic.ctl) and
STANDARD_ERROR="SQL*Loader-500: Unable to open file (Z:\ControlCAMarjaLunar.ctl) respectively
But this file exists - I copied path+filename from error messge and I pasted in comand prompt
Many thanks,
Aurel
Maybe you are looking for
-
My Iphone 5 crashed after installing ios8
My iphone 5 crashed when downloading and installing ios8 update. Tried to retrieve in iTunes, but gets error code What do I do now??
-
I have a 777 page PDF which will open in Adobe Reader 11.0.10, but if I scroll or jump to a page mid-document Reader will hang and display the spinning beach ball indefinitely. This PDF behaves normally in Windows, but locks up every time on my Mac.
-
Info about business rules and views
I need to enforce some business rules on a view. Are triggers my only option ?
-
PVM OL6 kickstart install challenges on Oracle VM 3.1.1.544
Thank you all in advance for your support! Environment: Oracle VM 3.1.1.544 patched 4 Dell M610's, 1 with Oracle VM Manager (4 NICS, 2 active, eth3/private and eth0/public), 3 Oracle VM servers (4 NICS, 2 bonds w 802.1q VLANS, 3 private non routable
-
OIM Track request - all provisioned and approved
Hi experts, is there any way we give permissions to ALL Users to track requests in OIM. Now only xelsysadm can see all requests means requests which are approved and completed. I am using OIM 10g . Thanks, Pallavi