Officejet J4550 All-in-One Software and Drivers not supported in Windows 7

Windows 7 (automatic) and I (manual download from HP site) tried to install the printer driver software (64 bit system) and got an error software not supported. Went to the windows update site and the Officejet 4500 series was not listed. Is there any solution to this problem?

Run the install .exe file in compatibility mode for Vista SP2. Can someone explain to me how to do this?

Similar Messages

HP deskjet F4440 all in one software and drivers

I can not seem to find the software and drivers for this product
This question was solved.
View Solution.

Hi,
The HP Deskjet F4440 is part of the F4400 Series, this is the correct driver for your printer.
What do you mean by it would not work?
What specific beavior or error message do you see while trying to install it?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printer, All in One software and Drivers

Upgraded my MacBook Air to 10.6 and cannot get my printer Photosmart Prem C310a product CN503B to install download updated driver software beyond the 'Add Printer'. See on some websites that Apple will not recognise Bonjour. Any suggestions?
This question was solved.
View Solution.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en&os=4159&product=423...
plm1,
Here is a link to a document that may help.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ? Loooking for any answers ! Thank Yopu ,JS

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

How to download repair of "missing WIA" for officejet J4550 All in one printer

officejet J4550, all in one
Problem: message states "missing WIA"
I'm missing my installation disk and would like to download the solution to repair/update/install the WIA.
how to download repair of "missing WIA" for officejet J4550 All in one printer

HI knewsomga,
WIA is Windows Image Acquisition, it is a proprietary Microsoft driver model and application programming interface (API) for Microsoft Windows Me and later Windows operating systems that enables graphics software to communicate with imaging hardware such as scanners, digital cameras and Digital Video-equipment. - Source
Please follow the instructions below.
Please hold down the windows flag key and the R to open the Run box.
Type services.msc and press Enter
Locate Windows Image Acquisition (WIA)
Right click and open Properties
Stop the service from the General tab and then Start it again
Verify that the Startup type is set to Automatic rather then manual
Also, look for 'Shell Hardware Detection' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically from its properties.
Locate the 'Remote Procedure Call (RPC)' in the list of services. If it is not enabled/started, make sure to enable/start the service, and make sure the Startup Type set as Automatically as well.
If the issue persist, the HP Print and Scan Dr might help, otherwise I suggest contacting Microsoft.
Click here to download and run the utility > HP Print and Scan Doctor
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet 4315v All-in-One will send but not receive faxes

I can send faxes on my HP Officejet 4315v All-in-One printer, but cannot receive them. Please help.

Hi @exotica7
I would like to help you with the fax issue you are experiencing. The following documents address fax issues that may arise. Although you can send but not receive, I suggest starting with the first document. It will guide you through the necessary steps to troubleshoot receiving issues.
Cannot Send or Receive Faxes
Troubleshooting 'Phone Off Hook' Front Panel Messages
'Phone Off Hook' Status Message Displays on the Control Panel
Interpreting Error Codes in Fax Communication Error or Fax History Reports
Testing Your HP Fax Machine with the HP Fax Test Service
Incoming Faxes Print Small or Print on More than One Page, or a Blank Page Ejects Between Printed Fa...
Using the Fax Diagnostics Test
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet J4550 All in one printer Will not print anything no error message

I had this problem before and was able to talk to a technician and found I had no default printer when he told me how to do that it fixed my problem. The printer functions like it will print takes paper in but when it comes out it is blank Ink levels are fine ran through all the checks with power and if computer is working ok everything checks out fine. It just won't print anything on paper.

'''''"My new printer..."'''''
For a newly installed printer, you may need to reset some hidden preferences, '''''print.print_printer''''', in particular, for Firefox to recognize the new printer.
*See --> http://kb.mozillazine.org/Problems_printing_web_pages (''see "Reset printer"'')
*See --> http://kb.mozillazine.org/About:config
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

HP Officejet 1600 all-in-one Scanner ONLY suddenly not recognized

Hi,
I seem to have ongoing issues with this machine. My computer randomly decides not recognize the scanner connection on my HP Officeseries 1600 All-In-One. Oddly enough, it recognizes the machine's printer and I can print with no problem. Yet in setting up the reinstalled software, it cannot find anything on the USB port. I uinstall and re-install the softwrae. The other day I used a new USB cord and it worked fine until this morning when I aborted a scan. From then on nothing I do will get the computer to recognize the scan via the USB port. I tried two other cables, one of which I know is good because I have another printer connected on that cable. Any suggestions? Thanks!

I revisited the HP website and they now have software for 10. 4, which they didn't the last time I had this problem. Downloaded that and now everything seems to be working fine....until next time, eh?

Trying to connect HP officejet all-in-one! assitant does not support router??

I am trying to connect HPOfficejet 7410 All-in-One which is wirless enabled to my wireless netowork. Getting message," HP NETWORK ASSISTANT does not currently support the router that is connected to your system." Does this mean that I cannot setup this printer with the router I have? Or is there another way I can connect it without using the Network assistant? The router I have is a Linksys Router Model # WRT110 . I have tried to find another router that was in the list of "supported routers" with no luck. I have looked everywhere. Please if someone could help! Let me know if you need more info to answer my question. Thanks!

Actually, its not that the youre router is not ocompatible with the HP Network Assistant. Maybe yuore router has a very secure network security thats why the wireless assistant could not connect the printer to youre router
- The other way to connect the printer to your wireless network is to run the wireless setup wizard on the printer.
- Step 1. Press the set up button on the printer and press the right arrow then navigate & look for netwok menu then press ok.
- Step 2. press the right arrow and look for wireless setup wizard
- it will look for youre wireless router and try to select your router the enter the security key(WEP or WPA) if you have one.
- after that it will prompt you that the printer is connected to your network
REGARDs --- 1234 --

1315v All-in-one Solution center app not available in Windows 7 ?

Just got windows 7 and the HP Support and Drivers doesn't have the same Solution Center sw available.
I loved the way it worked in Win XP.      Pls tell me where it is located.

hi khan2000,
Welcome to Lenovo Community Forums!
Can you post here the Hardware Id of the Wireless Device
     - In device manager Wifi device should show like Network controller with a yellow Icon.
                -Right-click on it and choose properties.
                -Click on the details tab on top
                -Change the property Value, change it to Hardware ID
                -then paste back here what's on the Value
Link to sample photo
This will help us the Name of the WIFI and will guide us on downloading the right driver
Solid Cruver
Thanks,
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Tktds6xx drivers not supported by Windows 7

I've just upgraded from Windows XP to Windows 7. It turns out that Tektronics does not support a tktds6xx driver for Windows 7. Does this mean that I can no longer write software that supports those scopes? I noticed that they do support a tktds7xx driver. Could I cheat and use that one?
Solved!
Go to Solution.

Of course you are right. It seems that all I needed to do was restart the computer, figure out the OO way of storing driver code, and find where they put the dll file. It seems using the old dll file doesn't work. It's hard to ask the right questions when you haven't figured out what the problem really is yet.

OfficeJet J4550 All-In-One not scanning or copying; only prints from certain sites

I have a HP Pavillion Slimline 400 and my will not scan or copy, and only prints from certain sites. I have uninstalled and installed the software driver numerous times and still get a "scanner not working" message. I have also unplugged and turned off and replugged in the USB and the power cords several times. Currently, I have uninstalled the printer software, so I have no recognizable printer on my PC. Help!!

Hello bran1288,
Welcome to the HP Forums.
I see that you are having an issue with scanning and printing from a select few sites.
I have a few steps that we can try to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
As for printing from web pages, please make sure that you have your firewall or anti virus settings turned down as well as the Pop-up blocker disabled. If this does not resolve the issue, maybe try another web browser such as Mozilla fire fox or Google Chrome.
As for the scanning issue, so I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Please write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

After operating a HP Officejet 4500 All-in-One Printer - G510g from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
The www.hp.com site offers a download of a full driver for the printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
There are no options to uninstall, either in control panel/printers or in control panel/software.
Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
I have also tried the HP Printer Installation Wizard. The result is similar.
Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
Thank you
This question was solved.
View Solution.

Hello @monc , welcome to the HP forums!
I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software
Restart the PC afterwards
Perform a Clean Boot
Restart the PC again
Download and install the printer again: HP Officejet Full Feature Software and Driver
If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing from 10.6.6 to an HP Officejet 6210xi All-in-One printer

I have a brand new iMac - 27-inch, 3.2Ghz running 10.6.6 - connected to an older printer, an HP Officejet 6210xi All-in-One printer, and I am unable to print.
Running the Printer System Preferences sees the printer via USB, and I install the print-drivers that come with Snow Leopard, but absolutely nothing prints. Trying to print just produces a useless "Error" error-message in the print-queue window, with no detailed explanation as to why.
I have tried downloading and installing the latest MacOS print-driver from HP, but this doesn't help. I can't print a single page.
I assume I should be using the print-drivers that come with Snow Leopard, but I have no idea why printing does not work. I can disconnect the USB cable from the new iMac, and connect it to my older iMac, running 10.4 and printing works fine. So I know that the USB cable and printer are OK. But if I move the USB cable to the new iMac, printing does not work at all.
I have tried different USB ports on the new iMac, I have disconnected all USB cables and restarted the iMac, then re-connected only the USB cable to the printer, but no luck.
Any ideas as to what else I can try?
Thanks,
--- Christer

When you say you have installed the latest print driver from HP do you mean from the HP site or do you mean using Software Update/from Apple site?
If you mean the All-in-one package that sits in your app folder try uninstalling that, (there is an uninstaller in it), and then try again with OSX.
I think when you plug in your machine the Mac should recognise your printer and ask if you want to download the appropriate SW.
So, my steps would be.....
1). Uninstall the HP All in one.
2).Restart.
3). Plug in to Mac, (and power), and switch on 6210.
4). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
......if still no joy;
5). Re-apply combo updater.
6). Plug in to Mac, (and power), and switch on 6210.
7). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
8). Come back and curse/thank me, then go back to the HP site and see if a more up to date package exists

HP Officejet 6310 all-in-one wireless option questions

I have a HP Officejet 6300 All-in-One printer and I was using it with my wire network connection. I just moved to a new home, which I rent, and I do not want to make new wholes to past the cables then this is my question:
"I have a Cisco Linksys AE1000 high performance wireless-N usb adpater (dual band)" and I saw this product Female USB A to Male Ethernet RJ45 Plug Adapter (on Amazon that I think will be great if I can use it). Can I connect them to make my printer wireless?"
Please help.
Thanks.
BAK

Unfortunately that will not work for this printer. Wireless printing is set up through the printers software that you install on your computer. Since this printer is not a wireless printer, there will be no option to set it up wirelessly in the software, the only options will be ethernet or USB.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Officejet J4550 All-in-One Software and Drivers not supported in Windows 7

Similar Messages

Maybe you are looking for