OfficeJet J6480 Duplex Printing not working

Duplexer is installed correctly with my OfficeJet J6480. When I try to print a two sided page using AUTOMATIC setting, it prints a page and pushces out the page without rolling it back to print on the other side. Any input on correcting this issue?
I have the latest drivers installed.

Hi, I had the same problem. There is a setting on the porperties page for your printer. Right click on your printer and select printer properties. When you get the properties page, select the Device Settings tab. Make sure the Duplex Unit (2 sided printing) is set to Installed.

Similar Messages

HP Officejet Pro 8600 Duplex Printing Not Working

I am running Windows 7. Duplex printing is not working on my Officejet Pro 8600. It has worked in the past, but I cannot get it to work now. I have reset the printer and restarted by laptop. I have not made any changes that should affect the duplex printing. Thank you.

Hi there beachlover.
Hope you are doing wel and welcome to the HP forums;
The Hardware Diagnostic tool can help you find common hardware issues and in most occasions fix them Give it a try by going to this link www.hp.com/go/tools Let me know the results and include any errors that the utility finds
I will try my best to help you .
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Officejet Pro 8600 Plus duplex printing not working

I am running Mac OSX leopard (10.5.8) and just bought the officejet pro 8600. Everything seems to work great except I can't figure out how to print on two sides. The option isn't allowed in page setup
I have checked the settings on the printer and can't see anything to indicate how to switch on the option for double-sided printing.
Thanks in advance for the help.
This question was solved.
View Solution.

Hi,
Please follow the steps below to configure the driver for automatic duplex printing:
1. Verify the duplex-printing accessory has been installed properly. To verify this open the System Preferences and go to Print & Fax. Open the print queue of your printer. Click on Printer Setup and from the tab menu choose Driver. Verify the box next to HP Two-sided Printing Accessory (Duplexer) is checked.
2. On the File menu, select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
3. In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
4. To select the binding type click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
5. Select Layout from the drop-down menu.
6. Set the Two-Sided option as Long-Edge binding (Portrait), or Long-Edge binding (landscape).
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Please let me know of any problem,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Automatic Duplex Printing not working on HP Color LaserJet 3600DN in Windows 7. It worked before.

I have an HP color laserjet 3600 DN on Windows 7. This computer came w/ Windows Vista and a 3600DN driver was installed and the computer was upgraded to Windows 7. The printer did automatic duplex printing.
At one point, my computer indicated that it could no longer find the printer. In an effort to solve this problem, I uninstalled the printer. When I tried to reinstall the printer the computer could not find the driver. At that point I tried to download a windows 7 CLJ 3600 DN driver. Since HP doesn't provide this driver for Windows 7, I tried to download the Windows Vista driver for 3600DN.
However, when I go to the appropriate webpage by following the links, only drivers for Color Laserjet 3600 are listed (no 3600DN drivers).
As far we can tell it only allows Manual Duplex printing (no automatic duplex printing). Clicking the "Two Sided Duplex Printing" option is there but only works when the "print on both sides (Manual)" is set on the Finishing page. If manual is turned off, then it becomes single sided.
Can I get a driver that will allow me to do automatic duplex printing on on my HP CLJ 3600 DN using Windows 7?

How did you replave the duplex belt? How to deassemble the backside of a officejet and click the new belt on? I can't see nor do it y self

HP LaserJet 1320 Duplex Printing Not working with Windows 7

Hi
I've just bought a new PC with Windows 7 Home Premium. I have an HP LaserJet 1320 printer (Prod no. Q5927A, SN CNGW53RLRY).
I cannot find driver that works the same way as the previous driver HP LaserJet PCL5. If I use this driver and can still get duplex printing but it will only print one copy at a time.
If I upgrade to HP Universal Printing PLC (or PLC v5) I can print multiple copies but not duplex printing. I have searched high and low through the HP site but to no avail.
Any help and advice will be much appreciated.
Thanks
GB

Hello,
I've seen this same issue with my printers (other HP printers) whereby the default setting to support the Duplexing hardware was set to 'off'.
A quick method to check this is look at what the setting is for Duplex hardware in the Device Settings tab, and if it's not set, correct it.
Printer Properties:
From the 'Start' orb -> [Devices & Printers] -> right click on your Printer icon -> select 'Printer Properties' -> click on 'Device Settings' tab.
You should see a dialog similar to the mine (attached): look for the 'Duplex unit (for 2-sided printing)' and see if it's set to "Not Installed":
--> in either case, click on 'Not installed' and from the dropdown box, select 'Installed'... Click 'OK' to accept the changes and close the dialog.
Printing Preferences:
again, right click on your Printer icon -> select 'Printing Preferences' -> click on 'Advanced' tab.
-->Check to see if there is a 'Duplex Hardware' or '2-sided printing' option in here: mine doesn't show one but thougth I'd mention it nonetheless.
Click on the 'Finishing' tab and select 'Print on both sides'...or simply test print a multi-page document and set those preferences on-the-fly.
Let me know if this helps...
HardCopyTed
Regards,
HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
How to Give Kudos | How to mark as Solved
Attachments:
PCL6-DeviceSettingsScreenCap.JPG ‏81 KB

Duplex Printing Not Working - Brother HL4570CDW

Hey all,
I managed to get a network printer setup and it works; however, the only thing that isn't working is duplex printing. I installed the driver from AUR: https://aur.archlinux.org/packages/brother-hl4570cdw/
In my default options I have "Two-Sided Printing" set to "Long-Edge Binding". But the CUPS printer page at localhost:631/printers/metafont (where metafont is the name/URL of the printer) shows me:
Description: metafont
Location: metafont
Driver: Brother HL-4570CDW series CUPS (color, 2-sided printing)
Connection: lpd://metafont/BINARY_P1
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
What concerns me here is the sides=one-sided, I have a feeling that's a problem. In any case, I tried to print a PDF using evince and in "Page Setup" it tells me that the two-sided option is "Not available" and I also tried to print from the command line and adding the "-o sides=two-sided-long-edge" option but that didn't work either.
Any help would be appreciated!

He Daniel.
The standard HP ePrint feature does not support Duplex printing, I would assume that the same applies for HP ePrint Enterprise:
Are there any limitations that I should be aware of when using ePrint?
Duplexing (printing on both sides of the page) is not supported.
http://support.hp.com/us-en/document/c02882571
I suggest ensuring a such in the commercial forums, there are more expertize users for such a subject:
http://h30499.www3.hp.com/t5/HP-Designjet-ePrint-and-Share/bd-p/hp_eprint_and_share#.VPGA7oJOj5w
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Psc1510 and duplex printing not working

I have windows 7 64bit and all is ok, but when I try to print with duplex setting, the printer start its work without asking me to reload the already printed page.
In XP, this feature works great.
thanks
Message Edited by axoduss on 10-05-2009 12:25 PM

He Daniel.
The standard HP ePrint feature does not support Duplex printing, I would assume that the same applies for HP ePrint Enterprise:
Are there any limitations that I should be aware of when using ePrint?
Duplexing (printing on both sides of the page) is not supported.
http://support.hp.com/us-en/document/c02882571
I suggest ensuring a such in the commercial forums, there are more expertize users for such a subject:
http://h30499.www3.hp.com/t5/HP-Designjet-ePrint-and-Share/bd-p/hp_eprint_and_share#.VPGA7oJOj5w
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

CP2025- Duplex printing not working anymore

I have been using for more than 8 month my CP2025 in duplex with very good results.
Nontehless, this last month I had only problem.
Printing in duplex, I have the first page well printed, and on the second page, it prints only the fist leaf and then stops. I have a message indicating a misprint (with no other information), I press OK, it restars for 2 pages.
That is very ... annoying.
Anybody had this problem?

He Daniel.
The standard HP ePrint feature does not support Duplex printing, I would assume that the same applies for HP ePrint Enterprise:
Are there any limitations that I should be aware of when using ePrint?
Duplexing (printing on both sides of the page) is not supported.
http://support.hp.com/us-en/document/c02882571
I suggest ensuring a such in the commercial forums, there are more expertize users for such a subject:
http://h30499.www3.hp.com/t5/HP-Designjet-ePrint-and-Share/bd-p/hp_eprint_and_share#.VPGA7oJOj5w
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Duplex printing not working after installing HP Printer Driver Update 1.1.1

Hi,
our printers (Lexmark T622, HP Laserjet 2200, both equipped with a duplex unit) are managed by printer queues on our Mac OS X Server (10.5.5). Our users (mostly having Mac Books running 10.5.4 or 10.5.5) are printing by sending their jobs to the queues on the Mac OS X Server (via IPP/TCP/IP).
So far so good.
It seems that the users who have installed the "HP Printer Driver Update 1.1.1" aren't able to do duplex-printouts anymore. All sheets that leave the printers are printed on one side only - the "Duplex" setting by these clients is just ignored. Users who haven't installed the update yet, don't have the problem (at least it seems to me like this, but I have to admit that I've tested it with only three different Mac Books, yet).
My questions are:
- Has anybody else observed this behaviour, yet?
- Or, even better, does anybody have a solution to it? Reinstalling the printer on an affected client doesn't solve it. That's what I tried already.
- Is there any possibility to make the printer driver update "undone", which means to do a kind of downgrade from 1.1.1 to 1.1?
Thank you very much in advance!
Best regards,
Steffen

Hi,
it seems that
http://discussions.apple.com/thread.jspa?threadID=1715794&tstart=0#8157481
fixes my problem.
Best regards,
Steffen

Adobe Reader XI 11.0.10 duplex printing not working

I am trying to print a pdf two sided. My operating system is Windows 8.1 Pro and I am using the Xerox Work Centre 5875 printer. The settings on the print driver are set to default print 2 sided and in adobe reader two sided printing is checked off but it still comes out 1 sided. Printing double sided works in all other programs. Please help.

Hi satsugyo1,
For printing both sides, you might also need to enable 'printing on both sides' option in Reader print dialog box.
Please do the same and then print your PDF.
Let me know how it goes.
Regards,
Anubha

I want to print directly from my iPad to a HP Officejet J6480 wireless printer. Do I need an app for this or can I do it without and if so, how?

I am a new iPad (wi fi version) owner but not the new iPad 2. I have a home wireless network and have a HP Officejet J6480 wireless printer. I print from my iMac and Powerbook directly using the wireless network and want to print directly from my iPad also. Do I need a special app for this or can I do this with something already "built-in" to the operating system of the iPad.

Welcome to Apple Support Communities.
If you're comfortable going 'under the hood', this thread originally started in November 2010 contains a minor tweak to OS X that might work for you:
https://discussions.apple.com/thread/2658720?threadID=2658720&tstart=0
It allows devices on iOS 4.2 or newer to print to shared wired and wireless printers as long as the Mac is on and awake.

Officejet J6480 wont print after installing new comcast modem...

My Officejet J6480 wont print after installing new comcast modem...
I have deleted and reinstalled several times and it still wont work...
OS=10.9.2

https://www.youtube.com/watch?v=Rjd1ZqJ89N4
this video help solve the issue - i had to select infrastructure behavior on the advanced tab under Networking>Advances tab...

HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Printer not working following iPad uodate

Printer not working following iPad upgrade

Hi,
Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
Other things to check would be that there have been no recent changes to the wifi password.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
Thanks

I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

OfficeJet J6480 Duplex Printing not working

Similar Messages

Maybe you are looking for