Officejet Pro 6830 Won't Print!!

Hi,
I have recently purchased an HP Officejet Pro 6830 and after being set up it just doesn't want to print.
I can't print a test page on it's own but with the HP Print and Scan Doctor it prints test pages.
It can't print from any Microsoft Office 2013 Pro Plus software but I can print from the standard Notepad and Acrobat Reader programs.
I have tried everything I could think of!
-Reinstalling Software + Drivers
-Restarting the Printing Spooling service
-Reintalling Microsoft Office
-Deleting other Printers and its drivers
-Updating network driver
-Adding the Printer using the standard microsoft "add a new printer" action
-Running the HP Print and Scan Doctor which found pretty much no issues.
-Disabling my anti-virus and firewall
The printer is connected wirelessly everywhere and it has been setup on other computers in the house and it works fine with them. That's why I haven't returned it!
I'm an IT guy by trade but this thing has made me desperate enough to post a question here!
Any help would be grateful.
Thank You,
Paul

Hello TedWallerstedt,
I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, do you have the same issue when making a copy as opposed to a print?
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

Hi,
Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

HP Officejet Pro 6830 Won't Connect to WiFi

I've had the HP Officejet Pro 6830 for 6-9 months, it's been working great wirelessly the whole time. Three nights ago we had a power failure, now the printer won't connect to the wireless router. It sees the SSID, but when I enter the password, it says that the password is wrong. I am using an ARRIS Cable Modem. Any suggestions?

Hi @CWoodland ,
I see that you are having issues with setting up the network again for the printer, you are getting a message that the password is wrong. I would really like to be able to help you resolve this issue.
I would check the network password on the Mac, to verify the correct password is being entered.
How to Find the WEP or WPA Key or Password for Your Wireless Network.
You might have to restore the printer defaults and try again.
Go to Setup, Network Setup, Restore Network Settings.
Then run Wireless Setup Wizard again from the printer's display.
Go to Setup, Network Setup, Wireless Settings, Wireless Setup Wizard.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro 8500 won't print yellow. No error message. Cartridge not out of ink.

Printer won't print yellow. No error messages. Cartidge not out of ink, but did put in a new one and still won't print yellow.

Ok SLU87...here are some steps you can take that should help with your Officejet Pro 8500 A909g not printing yellow:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01980797&tmp_task=solveCategory&cc=us&dlc=en&la...
Let me know if it helps or not.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Officejet Pro 6830 unable to print

I was able to print wirelessly to my Officejet Pro 6830 and all of a sudden I can't do so today. I have performed diagnostics and everything shows up OK. However when I checked the printer job status, nothing shows up.
How do I go about solving this issue?

Hi @VexedHPUser
Perhaps the Microsoft Fix it utility will help;
What it fixes
You are unable to install a printer, connect to a printer, or print more than one job at a time
You receive an error indicating your Print Spooler service is experiencing problems
You receive an error indicating your is not the default printer
You receive an error indicating: cannot be contacted over the network
Identify if your printer is turned off
Identify if your printer toner is low or empty causing your print job to appear faint or it does not print at all
Identify if your printer paper is low or empty
Identify if the printer has a paper jam which is preventing it from operating normally
Identify if a print job that is in the print queue is preventing other print jobs from printing
Identify if you need to update your print driver
You receive an error stating that your Plug and Play printer %PRINTERNAME% has encountered a driver problem
If the issue persists, I think it might be a good idea to reach out to the Microsoft Community.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

New Officejet Pro 6830 will not print via USB connection. It scans great to PC. It copies.

New HP Officejet Pro 6830 for user to have local USB printer/scanner at desk. User runs win 7 64 bit on a network. Raninstall through setup.exe. Followed steps, connected printer via USB when it said to and it detected it and finished install.You can use HP Scan software and it scans to the PC perfectly. It will not print from any application or even a testpage from the Printer Properties page. If you go to the maintenance application it will print status and test page. If you run HP Scan and Print doctor it does it's thing, gives all Green Check marks and lets you print a test page fine, but it stillwill not print even a test page from the printer properties page (start/Devices and Pritners/right click on Officejet Pro 6830, select Printer Properties for Officejet Pro 6830 (not the Fax 6830), and click print test page. It does not seethe printer. It is a networked PC and has network defined HP network printers as well but user wanted a printer/scanner at his desk. I actually took the unit and connected to my laptop which is same win 7 64 bit platform and it does the same thing. I disable the virus protection to do the install so that is not an issue. It clearly sees and installs the printer, andlike I said the HP Scan works fine so it is connected via the USB to the PC, but it will not print. I have tried to install from the CD, and removed device and tried to install from the new downloaded drivers as well and it just does not want to print.I have conected to different USB ports, and like I said actually tried it on a different PC and had same results. Guidance certainly would be appreciated.

Hi , I see by your post that you can scan, but are unable to print over the USB connection. I would be happy to help you.
I have provided a document for setting Security permissions for printing to see if that will help. If the issue persists, reinstall the printer on the Administrator Account to see if you have the same results.Unlock Hidden Administrator Account and install the printer on this account: Go to your Start menu and under the 'search programs and files' box type CMD. CMD will populate as a search option above, just right click on it and 'run as administrator'. Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter. Next, close CMD and restart your computer. When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it. If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.Under the Administrator account, install the printer software. Test the printer. To turn off the Admin account start back at step 1 and type in net user administrator /active:no.Please let me know the outcome. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

Officejet Pro 6830 slow to print

My officejet pro 6830 takes over 1.5 minutes to print the first page upon initiating a print job. During this time I hear the printhead adjusting. This seems like a very long time. Is this normal?

Hi @VexedHPUser
Perhaps the Microsoft Fix it utility will help;
What it fixes
You are unable to install a printer, connect to a printer, or print more than one job at a time
You receive an error indicating your Print Spooler service is experiencing problems
You receive an error indicating your is not the default printer
You receive an error indicating: cannot be contacted over the network
Identify if your printer is turned off
Identify if your printer toner is low or empty causing your print job to appear faint or it does not print at all
Identify if your printer paper is low or empty
Identify if the printer has a paper jam which is preventing it from operating normally
Identify if a print job that is in the print queue is preventing other print jobs from printing
Identify if you need to update your print driver
You receive an error stating that your Plug and Play printer %PRINTERNAME% has encountered a driver problem
If the issue persists, I think it might be a good idea to reach out to the Microsoft Community.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp officejet pro 8500a won't print or copy without turning off then on again

HP Officejet pro 8500A, Will not print, copy or print received fax. HP icon on the Printer screen just spins, but never prints. The print jobs show in the Que, but never print out. If I shut off the printer and turn it back on it will print, but after a short while it stops again. It has also asked for ink to be replaced.

Hello pcmtgrl
Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP Officejet Pro L7780 won't print individual pages of a file

I have a HP Officejet Pro L7780 setup with wireless printing on my network and am using Windows 7 on a 64-bit computer with MSWord 2007. I'm trying to duplex print just specific corrected pages (like pages 7-8) from a file (of pages 1-22) and my printer just won't do it. When I select to print specific pages, the printer just sits there and then the print queue is apparently dumped, as the tray icon just disappears. The printer will print only all pages of a file or nothing at all. What could be the reason for this and how do I correct it? Thanks, Patricia

Hello tdhoobyar,
Please click here to access the troubleshooting steps that should resolve the issue.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Officejet Pro 8625 won't print.

Recently purchase Officejet Pro 8625. It won't print from my XP computer, USB interface. I have connected a Vista laptop to it and it prints.
When I send a test page to it, the print dialog box shows the print job status as "spooling", then the job disappears, but it didn't print.
I tried downloading the 8625 basic driver from HP's site. As I walk through the setup, when it asks me to plug in the USB cable, I can't go any further. I don't think that the computer can see the printer. I have another printer, and using the same USB port and cable, I can print without problems.
Thanks for any suggestions!

Hi,
Try following the HP Print and Scan dovtor by selecting Fix Printing and select if that may help resolving the issue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-135113-1&cc=us&dlc=en&lc=en...
If that does not help resolving the issue, Click on Start > All Programs > HP > HP Officejet Pro 8620 and select Uninstall to remove the software.
Click the Start button and then click on Run.
Type spool into the run dialog and click on OK.
Open the Drivers folder.
Open the w32x86 folder.
Next, open the 3 folder.
Locate the HPBXPSRENDER.DLL file within this folder, right click it and Rename it into HPBXPSRENDER.OLD
Once you are done, download and install the latest software below and check for any difference:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-124140-3&cc=us&dlc=en&lc=en...
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet Pro 251dw won't print with applications inside Parallels 9

I've used HP printers with my Mac computers for years and had no problems, even when I was working with Windows XP and Windows-based applications inside Parallels Desktop on the Mac. All I would have to do to have the Windows-based software capture the printer (connected with a USB cord) was to click on a drop-down menu item under "USB." Recently I upgraded our OS to Mavericks and had to upgrade Parallels from Version 6 to Version 9. A week ago we had to replace our old HP Deskjet 6500 printer, and we chose the Officejet Pro 251dw. We connected the new printer wirelessly to our home network, and we were able to print from both our desktop iMac and our MacBook Pro with no difficulties. But when I needed to print something from PrintMaster 12, a Windows-based desktop publishing program running on Windows XP inside Parallels Desktop 9, the job wouldn't print, and I got a message that the printer wasn't connected. After doing my own troubleshooting, I spent several hours on the phone with Parallels tech support, including having them connect to my computer over LogMeIn and change all sorts of settings, but the best I could get was that the printer queue report said that the job was printing, but the touch screen on the printer flashed rapidly back and forth from "printing" to the date and time, with a large red X next to the date-time read-out, and still no job printed. After having two or three first-level techs and then a second-level engineer working on the setup, the Parallels people finally gave up and said that the problem must be in the settings inside the printer and that we'd have to have someone who works with printers.adjust them. Has anyone out there had this sort of problem working with Parallels Desktop 9 and the Mavericks OS? It wasn't just the desktop publishing software; the same thing happened when the engineer went into the Windows XP printer settings and tried to print a test page.

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

HP OfficeJet Pro 8500 won't print if one cartridge is empty?

Hi,
I have an OfficeJet Pro 8500 printer. I woudn't really need color printing. My yellow catridge run out of ink, and the printer woudn't allow me to print at all since I don't purchase a new cartridge. If it's true, quite sad from a company that is "committed to providing quality products in an environmentally sound manner".
Thanks for your help.

The Officejet Pro 8500 pigmented ink (like paint) and a separate printhead and ink supplies with plumbing to connect them. Some color ink is required to keep the printheads from clogging.
HP wants your printer to be able to print after you replace the supplies. There are some workarounds to force the printer to allow printing even with empty color cartridges, but doing this will likely ruin the printhead and preclude later color printing without replacing the printhead. In the 8500 one printhead is used for Black and Yellow, the other is Cyan and Magenta. The printheads are $65 each, personally I would not suggest overriding the protection as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet Pro L7590 won't print correctly after it sits a few days Windows Vista USB connection

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
Thanks for any help

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

HP Officejet Pro L7590 won't print correctly after it sits a few days

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
thanks for your input

Hello pcmtgrl
Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP Officejet Pro 8630 won't print from tray 2; says there's no paper

Action: Print from tray 2.
Expected Results: Paper feeds from tray 2 and prints.
Actual Results: Printer displays "out of paper" dialog.
Notes: Ever since I purchased the Officejet Pro 8630 six or eight months ago, tray 2 has not functioned. It says there's no paper in that tray. I've tried multiple types of letter sized paper. I've inspected the bottom of the main printer unit and the top of tray 2 for signs of damage; there doesn't seem to be any.
Tray 1 works just fine. It's actually a fantastic printer. The best I've owned. If only Tray 2 would work.

Hi @RouterIncident,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet Pro 6830 Won't Print!!

Similar Messages

Maybe you are looking for