Officejet Pro 8000 doesn't work in Explorer 9

How do I get my Officejet 8000 HP printer to work in Explorer 9

Have you enabled "Extended Form Rights for Reader" for the PDF?
Without the name of the Reader product explains it all.

Similar Messages

Hp officejet pro 8600 doesn't work with yosemite

Dear,
I've installed yosemite on my mac and now scanning doesn't work, there isn't the scanning button in system/print and scan like before installing yosemite!
I've tried to delete and reinstall driver (also update driver from appstore after installed the new driver) and I've tried to use the hp scan software but nothing the softaware report that there are no scanners!
Printing works very well the problem is only on scanning and only on mac because other pc with windows works correctly!
I've tried to follow this post http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/No-more-scanning-after-upgrading-to-MacOS-X-1... but nothing the scan doesn't work also after done all the things in the post!!!!!
I've also tried to speak with the phone assistance (in italy beacuse I'm writing from italy) but they have no advice for my problem!
Please help me I need scanning with mac for work!!!!!
Thanks
marchinho

Hello ,
Thank you for contacting the HP Support Forum. I understand that you HP Officejet Pro 8600 is having issues scanning after your Yosemite update. After a little research, I found a document that might get us started in the right direction.
Try these steps first, and then please let me know if they worked or not.
Regards,
wise_owl
I work on behalf of HP.

How to i select 'continous paper' for an officejet pro 8000?

I'm trying to print a banner 4 sheets long by 2 sheets high (from Poster Software - poster8.exe from postersw.com). I used to use an HP 960 printer that allowed me to select 'banner' or 'continous' paper. However, my new Officejet Pro 8000 doesn't give me that option. Is there a way I can print to continous-fed paper? Selecting 'Poster Printing' doesn't give me the options I need.
Thank you!

I couldn't figure out why my printer stopped following instructions from my software programs. So I reinstalled the HP Officejet Pro 8000 Wireless using my Windows 7 (64 bit) install CD.
Now the printer follows instructions but it must be physically connected by the USB ports. I want to work wirelessly. I know my IP address, but cannot input it because I don't know where the Printer options are.

HP Officejet Pro 8000 A809a - network connection does not work

Hi,
I just purchased the Officejet Pro 8000 (without wireless). Printer works great when connected and installed via USB, but network connection is just ... awkward. Meaning it doesn't want to work
Question: when I connect the printer via ethernet, the printer should automatically obtain an IP-adress from my router's DHCP-server, right?
Well that doesn't happen here. I printed the network configuration page several times, each time it states that the printer has the IP 169.254.90.4 with 255.255.0.0 as subnet. My local network is 192.168.2.0 with 255.255.255.0 as subnet. So the connection to the printer cannot work. Why doesn't the printer automatically obtain the network config of my network and how can I change this behavior?
Any help would be very appreciated.

Sometimes DSL providers have more control over the router than the printer likes.
- Unplug the telephone line and printer's Ethernet from the router.
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Connect Ethernet between the printer and router.
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- In screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 255 (the last number in the address).
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Use the router's IP address for the gateway and the first DNS (leave the second blank).
- Finally, plug in the phone line and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printing #10 envelopes using Microsoft Works on Officejet Pro 8000?

I am having trouble printing #10 size envelopes using Microsoft Works 8 on my Officejet Pro 8000. Somehow my settings got messed up causing wrong areas of the envelope to be printed and I need help to reset them. Thanks in advance to anyone who can help me with this.

I can't tell you how much I HATE this printer. I will never buy an HP product again. BROTHERS printers are simply and easy to use.

HP Officejet Pro 8000 A809

after installing Snow Leopard I have been getting error messages saying the software for the printer was installed wrongly. I am then invited to authenticate, and it runs off and 'repairs permissions' then prints.. Doesn't say what permissions and the time taken is too short for it to be a full permissions repair.
The printer software, aside fom the initial install with Snow Leopard and the variousO.S. updates, was installed through the Software Update sub menu. I assume it is not a matter of user privileges though I nearly always run in a non admin and authenticate. I have a few times had issues with apps and only got by them by installing in root, but that seems not what is involved as a set of 'permissions' was apparently being repaired.
Incidentally I have just been ploughing through an 11 page posting on HP printers where some seemeed more intent on propounding canaon law than helping, so don't bother with a recitation of dogma such as on not using root.
I have just taken a download of the HP drivers from the Apple site so could delete the `hp drivers (If I can track them down) though I would like an opinion on the best way to then re install them. By the wy my OS is now 10.8.3

Hey there @tjkalb, I hope you are doing well
I read your post about how a "line feed" page prints after each print job from your Officejet 8000, running Windows 7. I have some steps and questions for you to try to get started. Afterwards please get back to me with the results and we will go from there if needed.
1. Does the "line feed" page print after print jobs from all programs, or are you finding it prints when you print from somewhere specifically?
2. Try a Clean Boot on your PC, restart the PC, and try printing from Notepad to see if the line feed prints.
3. Print a Print Quality Page from the printer and examine it for any defects and to see if the line feed page still prints afterwards:
source
4. Click here and try download the "Updates" for this printer: HP Officejet Pro 8000 Printer - A809a
5. Create another User Account profile on your computer and try printing from there to see if the line feed page prints from another profile.
I look forward to hearing from you! If you wish to thank me for my assistance, click the thumbs up icon below
Happy Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Is anyone having issues with ink leaking from the printer head area? hp officejet pro 8000

HP Officejet Pro 8000 Wireless, Windows 7 64-bit. Printer is leaking from the printer head area. The problem doesn't seem to be coming from the heads but maybe another connection?????

docrobin
I would suggest you called into HP Technical Support for repair options as you may have a hardware issue.
Here is the link to contact options for laptops purchased in the US.
Here is the link to contact options for laptops purchased outside the US.
Please feel free to re-post if you have any further questions or concerns.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Duplex printing with officejet pro 8000

I am using this officejet pro 8000 to print up some newsletters. When printing a two sided copy (duplex printing) something happens which changes my border setting. Printing the exact same document, but electing one-sided copy renders a perfect border. I would not have a problem copying just one side, then re-loading those in order to make two-sided copies, but the friction caused by the ink on the pages causes mulitple sheets to feed at the same time, jamming the printer. Has HP ever come up with a fix for this? I have seen this problem on the net, but the best folks have done (that I have seen) is to upload drivers for older machines. This has rendered good borders on duplex prints, but diminishes the quality of the print copy. Whatcha think?

Terrible Tom wrote:
Since updating to Snow Leopard, I have had serious problems duplexing. Under the print dialogue window, there is no option to duplex. H.P. blames Mac. Mac blames H.P. I can duplex by going to "layout" and where it says "duplexing off" selecting "long-edge binding" will work. How dumb. Mac Help senior customized my settings by adding "duplex printing" to the "Presets" list.
Are you using the latest drivers from HP? If I set up a printer with the HP Officejet Pro 8000 A809 Series PPD, I can see Two-Sided to the right of Collated if the HP Two-sided Printing Accessory (Duplexer) is checked in the Print & Fax -> Options & Supplies -> Driver tab. If this is not checked, Two-Sided won't appear.
MAC HAS TO CREATE A PATCH TO SIMPLIFY THIS SNOW LEOPARD ERROR!
Apple doesn't write the HP software.
Hope this helps.

Officejet Pro 8000 says ink is empty even with a new cartridge

I have a HP Officejet Pro 8000 printer in my office at work, and yesterday it said my magenta ink was empty, so we ordered a new ink cartridge. Upon replacing the ink cartridge with a brand NEW one, it still says it is empty and the light is still flashing. Of course, this printer doesn't print at all, even in black ink only, without all cartridges working. I am so frustrated.

I have the same problem, does anyone have a solution? The Magenta light is always flashing. I've tried cleaning the tip with nail polish remover, inserted the cartridge in and out about 100 times and the light is still flashing and says the cartridge is empty and replace with new HP cartridge. The cartridges have always been HP, $170.00 for 4 of them.

HP Officejet Pro 8000 Printer series - A809 Slow Response to Word Print

Hello,
When I try to print from a Word Document the HP Officejet Pro 8000 Printer series - A809 Printer takes on average 1:24 to respond and print. When I go into the printer's settings and print a test page the Printer takes about 3 seconds to respond and print the document. The Printer has a Dual Side Printing add on and the optional paper tray.
Do you know what could cause such a long delay for the printer, especially when it only happens with word and other Microsoft Works Programs?
-Captain Kemp

I would also like to add that I am on a Mac OS X Version 10.6.4 with plenty of processing speed and Memory in case that would be useful in helping me

HP OfficeJet Pro 8000 A809 printing line feed page after every job

I've searched and I have found this is a known issue - that there is supposed to be an update to fix this. I can't find this update anywhere for the HP Officejet Pro 8000 A809. It is connected to the computer via a USB cable. I have tried uninstalling and reinstalling the driver, changing the print heads, doing diagnostics on it, ..., and I still get the line feed page printing after every print job. Help!

Hey there @tjkalb, I hope you are doing well
I read your post about how a "line feed" page prints after each print job from your Officejet 8000, running Windows 7. I have some steps and questions for you to try to get started. Afterwards please get back to me with the results and we will go from there if needed.
1. Does the "line feed" page print after print jobs from all programs, or are you finding it prints when you print from somewhere specifically?
2. Try a Clean Boot on your PC, restart the PC, and try printing from Notepad to see if the line feed prints.
3. Print a Print Quality Page from the printer and examine it for any defects and to see if the line feed page still prints afterwards:
source
4. Click here and try download the "Updates" for this printer: HP Officejet Pro 8000 Printer - A809a
5. Create another User Account profile on your computer and try printing from there to see if the line feed page prints from another profile.
I look forward to hearing from you! If you wish to thank me for my assistance, click the thumbs up icon below
Happy Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8000 Wireless Printer - A809n.says it's out of ink but has new cartridge

about 6 monhs ago the printer stopped printing stating it was a out of ink (black) after i replaced the cartridge it stopped again after about 10 days. i contacted HP and they basically told me to get a new printer. i decided to try a new cartridge again and reboot etc, etc. it still would work i use my other HP printer before looking to buy another. i read on the internet that this was a frequent problem with the HP Officejet Pro 8000 Wireless Printer - A809n. and it might be an printhead problem. i replaced the printhead and any low or outdated ink cartridge. the printer worked perfectly for 4 weeks. now i am having the same problem. this sticks. it is leaving a bad taste . i have been a loyal HP user i feel HP has made a questionable product and is not standing behind it.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Officejet pro 8000 and HP Home & Biz print app

I have an Officejet Pro 8000 wireless that, according to HP's list, is compatible with the HP Home & Biz print app for the iPad 2. However, the app does not find any printers on the wifi network. I am running Win 7 and the printer is shared and works fine with printing wirelessly from the computer. I followed the steps in the app to auto find any printer connected to the wifi, but it does not find anything at all. The way I understand the app, it allows non-eprint capable printers to print using the app. Am I missing something?

Hi,
As you have mentioned the printer is shared from Windows 7, is the printer connected to the PC by USB?
In order to use the HP ePrint Home & Biz, the printer must be connected to your router by ethernet cable and then the up should detect it.
Please make sure both the iPad and the printer connected to your network.
Follow the steps below to access the printer EWS page:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01554589&cc=us&dlc=en&lc=en&product=3762364&tmp...
Once locating the printer IP address, type it into Safari.
Can you access the page?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Network: limit printing access ( hp officejet pro 8000 )

Hello!
I have a HP Officejet Pro 8000 A809 connected to a LAN with approx. 100 PC's. It's not possible to attach it to my PC, because I want to share it and my PC is not running all the time.
Is there a possibility to restrict the access to the printer (MAC-filter, password) so that not everyone may print on my device? I have no access to the DHCP-Server or any other LAN facilities.
I already disabled WS Discover and WSD Print in the networking settings, but i would like to get some more security...
Any suggestions would be appreciated
Edit: Some additional information about the current situation
- Printer is accessed from 2 Win7-Notebooks and my Ubuntu 11.10 desktop
- Printer is plugged to the LAN, has a fixed IP adress and is working correctly

Hi there tallboy,
This microsoft article should help out with getting booklets setup and printed. Let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

About printing from hp officejet pro 8000

Hi,
My question is on technical side. I don't know I should ask it in this forum or not, Yet I am going to ask.
I am using officejet pro 8000 printer in my project. I connect it to my machine and send the test report data to printer. Report is printed successfully, but after printing the report the power LED is blinking continuously. It means that printer is still waiting for some data to print. So please tell me that which character should be sent to printer to specify "END OF DATA TRANSMISSION".

I wanted to share what I found in case someone else has the same questions.
Microsoft 2008
Go to Print dialog box
Choose the "Layout" Submenu (I think this menu defaults to "Copies and Pages")
There is a "two-sided" option, and you can choose "off", "long-edge binding", or "short edge binding"
Once I did this and saved the settings, it also worked for Excel and Adobe.
The only issue with Adobe is that you have to follow these steps every time you print. If I just hit print without following the below steps, it will not print duplex. The steps are at the following link.
http://helpx.adobe.com/acrobat/kb/print-double-sided-acrobat-reader.html#main_Ma c_OS_print_double_sided
I expected the same dialog box that appears on the web brower to also appear with my other applications, and that is not the case.

Officejet Pro 8000 doesn't work in Explorer 9

Similar Messages

Maybe you are looking for