Officejet Pro 8000 slow to select for color prints

I just installed Officejet Pro 8000 and immediately noticed how slowly the printer is selected in printer options box when I am doing color printing. It takes about 30 sec-1 minute to finalize the selection of this as my printer for the job. I have a networked color laser jet and a networked b&w laser jet also installed that are immediately selected when I choose them from the list.
I have been testing this in Word 2007 and have noticed that when I select the officejet, the bar at the bottom of the word screen says "connecting to printer" - this seems to be the source of the slowness. I have the latest driver installed and I do not have this problem when printing regular b&w docs on this printer.
Is there a problem here or is this normal <SLOW> color print operation?
Thanks!

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

Similar Messages

Printing to hp officejet pro 8000 wireless

After my 10-year-old DeskJet was incinerated by lightning, I purchased an HP OfficeJet Pro 8000 Wireless. Now I cannot print CD inserts; the driver says the printer is offline. However, I can then successfully print a Word document, for example, without making any changes.

Hi there,
On the IOS system, if you have e-print installed you have two options for printing wirelessly - through e-Print or AirPrint.
To print from AirPrint (which comes pre-installed on apple devices) , you take the route that you have outlined - if no wireless printer is found then there has been a problem during setup that you should be able to fix with the help of the AirPrint troubleshhoting steps below:
http://www8.hp.com/us/en/support-topics/mobile-printing/mobile-print-help-iphone-ipad.html
If the e-Print app is installed you also have the option to print using the e-Print app. The route to printing here involves opening the appa nd selecting the content that you want to print. You'll still need to be able to find your wireless printer so if you have any issues, the troubleshooting guide below shoudl help:
http://www8.hp.com/us/en/support-topics/mobile-printing/mobile-print-help-iphone-ipad.html
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to i select 'continous paper' for an officejet pro 8000?

I'm trying to print a banner 4 sheets long by 2 sheets high (from Poster Software - poster8.exe from postersw.com). I used to use an HP 960 printer that allowed me to select 'banner' or 'continous' paper. However, my new Officejet Pro 8000 doesn't give me that option. Is there a way I can print to continous-fed paper? Selecting 'Poster Printing' doesn't give me the options I need.
Thank you!

I couldn't figure out why my printer stopped following instructions from my software programs. So I reinstalled the HP Officejet Pro 8000 Wireless using my Windows 7 (64 bit) install CD.
Now the printer follows instructions but it must be physically connected by the USB ports. I want to work wirelessly. I know my IP address, but cannot input it because I don't know where the Printer options are.

Tutorial: Print index cards without removing paper from tray for Officejet Pro 8000.

The HP Officejet Pro 8000 and Officejet Pro 8000 wireless do not have a slot for inserting index cards and envelopes.
If you are wanting to print index cards without removing the paper from the tray, follow these steps.
The steps below are for 3 x 5 index cards.
1.) Open Microsoft Word
2.) Go to the Insert tab and insert a rectangle shape
3.) Draw a rectangle of any size
4.) Right click on the rectangle and select "Format Autoshape..."
5.) Under the Size tab, enter 5" for the height and 3" for the width (make sure "Absolute" is selected)
6.) Under the Layout tab, select "Center" for the horizontal alignment
7.) Click OK
8.) Use the keyboard up arrow key to move the rectangle to the top of the page. Make sure the top edge of the rectangle touches the top edge of the document.
9.) Print this document on plain 8.5" x 11" paper
10.) When you want to print an index card, place this 8.5x11 document in the paper tray printed side face up. Then place an index card over the rectangle and align with the border of the rectangle. After you print the index card, remove the 8.5x11 paper for the next time you need to print an index card.
Note 1: This are USA instructions. If you live in the UK or other countries you may have different paper size standards.

I can't tell you how much I HATE this printer. I will never buy an HP product again. BROTHERS printers are simply and easy to use.

HP officejet Pro 8000 Can't print when color cart is empty enven when printing in grey scale

I do not use color in my printing. Nonetheless when the printer says my color cartdridge is empty I can not print. I spent a $100 on color cartdridge and never used them. They now show empy and I can't print. Is there a work around or should I just junk this printer. Thanks for your help.
Bob

Hello Bobmcclammy,
I can understand the frustration when the printer, in your case the Officejet Pro 8000, stops and tells you to change inks you are not even using. I too have fought with this in the past. Unfortunately, there is no "work around" for such an issue, at least that I have been able to find.
Even when printing black text only, for example, a resume, the printer will be using a subtle amount of color as a base. Printhead maintenance also will chip away at the ink, this is to ensure the ink is not drying up within the print system. This information will explain more: Ink Usage in Inkjet Printers.
What I have done in order to get the most out of the printer ink is, set the printer in a black only grey scale mode. This needs to be set in the printing preferences in the print driver installed on the computer.
The inks will still need to be replaced, but it should help for the future.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Officejet Pro 8000 Printer series - A809 Slow Response to Word Print

Hello,
When I try to print from a Word Document the HP Officejet Pro 8000 Printer series - A809 Printer takes on average 1:24 to respond and print. When I go into the printer's settings and print a test page the Printer takes about 3 seconds to respond and print the document. The Printer has a Dual Side Printing add on and the optional paper tray.
Do you know what could cause such a long delay for the printer, especially when it only happens with word and other Microsoft Works Programs?
-Captain Kemp

I would also like to add that I am on a Mac OS X Version 10.6.4 with plenty of processing speed and Memory in case that would be useful in helping me

Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

I need an installation file for officejet pro 8000 series a809 printer

I need an installation file for officejet pro 8000 series a809 printer

Just search the web and you will find you answer.
http://www.google.com/search?q=+officejet+pro+8000+series+a809+&sourceid=ie7&rls=com.microsoft:en-us...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Driver installation problem for Officejet pro 8000

Hello,
We are trying to insall the Officejet pro 8000 (wireless) on a Dell Laptop (OS Vista 32). The drivers will not load. The error message is "DLL initialization failed". The USB connection is fine. Printer is detected. We have tried all the suggested solutions, (disabling firewalls/startup programs, starting, restarting, restarting again...) What are we missing?
Thank you for your help

Try to download the (updated) software from here.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet pro 8610 won't scan in color

I'm using a Mac OS 10.6.8 and just connected my new HP Officejet Pro 8610. It is only scanning in black and white. I do not see a place to select for color (when you select copy you have that choice but not on scan). It prints in color and makes color copies just fine. I also cannot see a place where I can tell it which folder on the computer to save scans to. Can you help me?

Hi @just1me ,
I'd like to help you be able to scan in color.
Did you download and install the Full Feature Software or run the Apple Updates?
Here is a document for Scanning with the Full Feature HP Software in OS X v10.10 Yosemite.
Try the Apple Software to see if you have the same results.
Here is a screen shot for where to change the color settings, scanning with the HP Scan Software.
After clicking scan, click on the drop down to get more options.
After showing the preview you can select the Edit icon at the bottom for more features.
To save the scan, select the Send Icon.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Paper mismatch error with HP officejet pro 8000 (A809)

officejet pro 8000 A809 wireless -wrong size paper
running OSX 10.7.3 on a macbook pro 2.3GHz Intel i5
this printer has been running fine for a couple/three years now.. no problem when I got the new macbook last summer, or when i upgraded to Lion.
Now it has started getting confused as to what the paper size is - i get this error:
Paper Size Error: The paper size selected in the printer driver software does not match the paper size in the printer IN tray.
but only SOMETIMES. Like right now after screaming at it for an hour, unplugging and rebooting, etc., I sat down to write this and needed to get the exact wording for the error, so i told it to print. And it printed just fine. So I tried the next page I need to print, and I got the error again. I didn't even TOUCH the printer in between. The paper is letter size, it's always letter size. It's in landscape mode, but it has been for the whole morning, while I've been printing out certificates. Now it won't do it anymore. I am at a complete loss. I have rebooted my computer 3 times now, and unplugged the printer countless times. HELP!!!!!
It did this about 3 weeks ago and gave me fits for a couple days, and then magically started working fine again. I've deleted the USB and Bonjour versions of the printer from system prefs and re-added them. More than once. ;-)
Any ideas?

Though a day late & dollar short, I too encountered this issue with Yosemite.
After removing the paper & restarting the printer, I determined the issue to be related to the document. The document I was printing was sent to me from an international corporation. Which I figure was using a non-US paper format or a larger page format for the document.
I tried to change those within the document & was unsuccessful.
I copied the content to a new document & it printed fine.

HP Officejet Pro 8000 Printing Blank Pages Instead Of Data And Also Reorienting Itself

Hi all
We have a wireless HP Officejet Pro 8000 in our office (but via cable, not wireless) to a network. The printer is occasionally printing blank pages instead of say a spreadsheet selected to print.
The other issue is that if you say are printing two copies of the same spreadsheet, one prints okay (say landscape) and the second copy, selected at the time of printing, prints it portrait but only part of the left hand side of it and the rest is blank. Coming out of and going back inthe file usually recitifes this. But it does it again any time it feels like it.
We did have an upgrade, where our IT guy took away our desktop boxes and replaced with smaller base units and everything is run from a main server and alsoan upgrade from Windows 2000 to Network. Problems started after this and the IT guy did update the printer driver.
Please would anyone be able to assist? Any help for this frustrating problem gratefully accepted!
Thanks,
Saxplayer67

So the issue with the 8000 printer is periodic print jobs do not come out as you are wanting them. Is that right? This is interesting, just from the point of view that generally speaking issues like this are like a light switch, they are either there or they are not - they usually don't come and go. That being said, we are going to see what we can do to resolve this. First I am going to recommend that we perform a clean installation of the printer after uninstalling it from the machine. By the way, what is the operating system you are working with - Is it Windows 2000 Network?
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3762364
Install that and let me know the result!
Have a great day!

HP OfficeJet Pro 8000 A809n print driver

I have a MacBook Pro running OS 10.7.5. For an unexplained reason, I lost the capability to print to the subject HP wireless printer. I opened System Preferences and clicked on Print & Scan. I deleted the driver entry corresponding to this printer and requested to add a new printer . It immediately found the A809n printer (my wife running a MBP with Mountain Lion can print to this printer without problem). I get a message stating:
Setting up 'OfficeJet Pro 8000 A809 [2F3790]...'
Software for this printer is available from Apple.
Would you like to download and install it?
with buttons for Cancel and Download & Install.
When I click Download & Install, I get a screen:
Setting up 'OfficeJet Pro 8000 A809 [2F3790]...'
Finding software
It progresses through about 25% of the % accomplished meter, then stalls. Eventually, I get the message:
Setting up 'OfficeJet Pro 8000 A809 [2F3790]...'
The software for this printer is currently unavailable.
Please contact the printer's manufacturer for the latest software.
Of course, when you go to HP to download a driver for this printer, it directs you to use the OS Print & Scan System Preferences which produces the failure mode described above.
Any ideas?
Thanks in advance.
Bob

You might try rebooting you computer first. Then go to the Apple menu and select Software Update... and if HP Printer Drivers v2.14 is listed, select it and update. If it's not listed, you can manually download and install from here. Afterwards, try adding the printer again.
If the problem persists, you might consider resetting the print system.
HTH

Multiple problems: OfficeJet Pro 8000 Wireless

We bought an HP OfficeJet Pro Wireless for our two Macs and it's been a nightmare. I've searched help guides and forums and am hoping you can help me fix the problems.
It takes 10 minutes to start up the printer each time. There is a lot whirring and noises coming.
Once it's finally, finally on it always can't print. I then usually have to reinstall the software from the CD using the USB cable and not wireless to get it to work, which it will then do exactly one time before I next need to use the printer, turn it on and have it refuse to print.
I have tried every configuration I can think of to no avail.
Currently I have just turned it on and I have a message saying that the printer is low on ink and cannot print. I have used this printer exactly 5 times and there is no way it's out of ink.
I apologise if I sound petulant, I've just never had such problems with any equipment and am worried we've made a very bad investment. I would truly appreciate any advice anyone can give.
Our set up is:
Mac laptop and desktop, both running Leopard
Wireless connection via BT Homehub router
OfficeJet Pro 8000 Wireless
Thank you very much! -Rachel
This question was solved.
View Solution.

I understand your frustration. Here are a few tips:
1. Don't turn your printer off. If you HAVE to turn it off, don't do it with a power strip or by unplugging the cord. Your printer will use ink (and quite a bit of it) to start up every time you turn it on. This is especially true if the printer did not have power during its time powered-off. You will bleed your ink cartridges dry very quickly this way. All the whirring you hear is the sound of sucking ink through the nozzles to clean them.
2. Set a static IP address for your printer. Pick a number outside the range 192.168.1.64 to 192.168.1.237 that your HomeHub uses to issue dynamic IP addresses. 192.168.1.50 is a nice round number. Here is how you do it:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- Click the Manual IP button and enter:
192.168.1.50 for the IP address
255.255.255.0 for the subnet
Leave the gateway and DNS blank
- Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
Delete and re-add the printer in the print queue:
- Sys Prefs, Print & Fax
- Select the printer in question and click the minus sign at the bottom of the list
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
If this does not work, do the same thing, only instead of the second step, right (control) click the print queue area and select Reset Printing System.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro 8000 Wireless won't connect to my new Airport Extreme router

I have owned my Officejet 8000 Wireless printer for about a year and had no problems with it. However, my old wireless router wasn't fully Mac compatible so I couldn't secure it with a password. I now need a secure network, so I bought an Apple Airport Extreme router in December.
I installed the router last night and it is working fine on my iMac, my PC laptop and my iPhone.
However, tonight I am trying to set up the Officejet Pro 8000 with no luck. I've searched the posts here for 3 hours and am not finding the help I need. Based on the other posts I've read, I am describing my situation below.
I am trying to set up the printer from my Intel iMac with Mac OS 10.6.4
I am trying to set up the printer with the HP Setup assistant that I just installed from the printer software.
On the first wizard screen it tells me that my device is not configured (I agree)
Then I ask it to configure for a wireless network.
When I get to the Network Selection page, both my network AND my guest network (which I let my neighbor use) are shown on the list with full signal strength.
When I click my network and then continue, the HP setup wizard freezes, and I have to force-quit it.
When I click my guest network and then continue, I get the message that my network is not within the reach. (FYI, the printer is 10 feet from the router.)
I have tried powering on/off the printer, router, and computer at all different stages of the process with no luck.
For my Airport:
My radio mode is set to the most compatible choice
MAC access control is not enabled
Everything is WPA2 security
"Use wide channels" and "Create a closed network" are UN-checked
The channel is set to 11
I am happy to try the "Add network client" thing I saw on other posts, but I don't think I have a printer front panel where I can start the "WPS" (don't know what that is) process. If I do, it's not obvious and not in the HP manual.
My ISP is Comcast (cable internet).
I would really, really appreciate some help! Please let me know what information I forgot to include and I will be happy to provide it.
Thank you!
This question was solved.
View Solution.

First, you should be at 10.6.6, so please do Software Update (Apple menu) over and over until there are no more updates.
From where did you get the HP software for your printer? Was it labeled as being compatible with 10.6?
Finally, you will need to reset the printer so, let's do that:
Press and hold the Power button, press Network button, (on some models, press the Wireless button ), two times, press the
press the Cancel button three times, and release the Power button.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro 8000 slow to select for color prints

Similar Messages

Maybe you are looking for