Officejet pro 8000 wireless will not print from windows photo viewer. all other diagnostics ok.

OS is Windows 7 Home Premium x 64. All functions and printing are ok with this unit, excepting for printing through Windows Photo Viewer. Have latest software, drivers, etc., and all HP software and hardware diagnostic tools check out ok.
Checked Windows event log, and get Event 350, PrintService - Document  failed to print and was deleted because of corruption in the spooled file. The associated driver is: . Try printing the document again.
There is no additional info on this event listed in the Microsoft TechNet Events and Errors Message Reporting Center
When this happens, all of the lights on the printer flash very rapidly.
To correct, I clear the queue through Explorer, Troubleshoot, and unplug printer to reset.
Any suggestions appreciated.
Thanks

FYI, I got this to work by treating my printer as a wired printer, even though it allegedly has wireless functionality. Luckily, my ohter devices can print to it wirelessly. At least I don't need to replace my printer just yet...

Similar Messages

  • HP Officejet Pro 8500 Wireless - will not print green

    I have a HP Officejet Pro 8500 Wireless that will not print Green.
    I have:
    1.  Cleaned Printhead using device cleaning command.  All steps
    2.  Alligned Printer - get message 'Alignment failed.  Refer to device documentation for details.'  I see know documentation
    3.  Calibrate Linefeed
    4.  Unplugged device while it was on and then replugged restarted.
    5.  Unplugged device while it was on and cleaned magenta/cyan printhead (following instructions from your website explictly).
    The Alignment failed message persists and it still will not print green.  I have done some of the above multiple times.
    I hope you can help quickly.  I have a home office and this is putting me behind a lot!
    If I need a new printhead, get one and it does not fix the problem, can I return it?  How can I get a printhead quickly?
    THanks! Kathy

    Hi KathyGates,
    Please let me take a moment to say "Welcome" to the HP Forums.   I hope you enjoy your experience!
    To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having an issue when it comes to printing in green.  I also see that you are having some issues with aligning the printer.
    I have a few suggestions and with any luck, hopefully get this issue resolved for you.
    Please start off by making sure you have the printer power cable connected directly to a wall outlet and not a power bar/strip.  I have a document that uses a LaserJet printer as an example but is meant for HP products in general. Please click the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I also have a document that troubleshoots Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
    Please write me back if you are still having issues or if you have more questions.
    If I don't hear back from you today, I hope you have a Fantastic Thursday.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Officejet Pro 8600 Plus will not print from my MacAir

    I have used my MacAir to print on my HP Officejet Pro 8600 Plus for about 5 months without any problems.  All of a sudden my printer will not print.  The wireless icon says it's connected to the network.  But when I click print it says "looking for air printer" and then "printer not connected".  I've repeated the Wizard Set Up for the wireless connection.  I've turned the printer and computer on and off.  I've even tried printing from my iPhone but it will not find the printer anymore.  Please help!

    Hello @ladybonds ,
    Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
    You are saying that you have been printing fine from your computer for 5 months and now your printer says it is connected to the network and your computer says that it isn't.
    Have you recently upgraded to Yosemite the new Apple OS? If not what OS X are you using?
    Are you sure that the printer and your devices are on the same network?
    Does the router give your printer an I.P address?
    Let me know these answers and we can go from there.
    I worked for HP.

  • Officejet Pro 8500A Premium will not print from my laptop

    I have an Officejet Pro 8500A Premium. I jus had ot reload my driver thinking it would resolve the below issue but it did not. The connection string is  laptop -> docking station -> ethernet to router -> ethernet to printer.  On my laptop I can see the ink levels of the printer so there is a connection but when I attempt to print and select the Officejet 8500 (non fax) printer, it attempts to print to the 8500A fax and then pops up with a fax box.  
    Additional Information:
    I have tried the following:
    - Changed the port for the 8500A fax
    - Tried to set the default printer from the fax to the network printer - received an error message: Operation could not be completed (error 0x0000709). Double check the printer name and make sure that the printer is connected to the network.
    This question was solved.
    View Solution.

    Hello coolhandluke2,
    Welcome to the HP Forums.
    I see that you are having issues when attempting to print from your Laptop.
    I also see that you are getting an error 0x0000709.
    I do have a few suggestions we can try.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I am also going to give you a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Me....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Officejet Pro 8000 Wireless - won't print an iTunes Playlist.

    No matter what I do, my new OJ Pro 8000 Wireless will not print an iTunes Playlist. I googled this and found that there is at least one other HP model with the same problem and no known solution. That really blows, considering how ubiquitous iTunes is. HP should solve this.

    i have about 11 of these crappy printers on my site, i think i have sent more back to HP than i have actively working.
    the current issue i have is also the black printing problem, its getting to the point where im considering recommending another supplier. HP's quality have gone though the floor with the recent crap they are producing..
    cartridges are fine, even though the Hp rep i spoke to blamed the issue on the cartridge, it works fine in another machine, and a new cartridge also has the same fault. the print heads are also fine & replaced & tested in a working machine, same fault. all the cleaning pages & stages made no differance.
    only solution - wave good bye and post it back to HP - yet again..
    come on HP you used to care about your products and your customers, but lately you just churn our any piece of rubbish.
    why have you let your standard slip soo far.. why dont you care about your customers anymore.

  • HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

    HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.  I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
    I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else. 
    Each time I want to print, I must reboot the computer.  After reboot I have one chance to print.   This problem started February 15, 2015.  
    My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
    OJ8500_A910_1315-1.exe
    HP Print and Scan Doctor - HPPSdr.exe
    HPSupportSolutionsFramework-11.51.0049.msi
    All versions were last downloaded on April 4, 2015.
    I have a home wireless network (Ubee DDW366 router).  All other devices in the house will print to the 8500A printer without issues:  2 Toshiba laptops, 2 Android phones, and 1FireHD.
    The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
    I have run virus scans and malware scans.  Each time they show there are no issues with my desktop.  What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer.  ASUS Motherboard P6X580 Premium.  Now I will probably get hacked!
    I am at my wits end.  And it is frustrating when I need to make a print of something and the system locks up.  I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed.  Also this is a time consumer.
    This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
    Help?
    Addendum:  I can scan using HP Printer Assistance.  I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
    This question was solved.
    View Solution.

    Hi ArielAce , thanks for getting back to me!
    I would recommend downloading and running the HP Print and Scan Doctor.
    Please keep me posted!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Hp officejet pro 8610e driver will not install in windows 8.1

    the Hp drivers will not install from disc or online download.

    Hi @aggie62,
    Welcome to the HP Forums!
    I understand that your HP Officejet pro 8610 driver will not install on Windows 8.1. I am happy to help!
    A few questions for starters:
    What happens when you try to install the driver?
    Do you see any error messages?
    How is your printer connected? Wireless, Ethernet, or USB?
    Are you able to make copies with your printer?
    In the meantime, please try the following:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. How to Disable Antivirus in Windows 8?
    Disable any firewall programs. Windows Firewall from start to finish.
    Create a new user account. Managing User Accounts and Logins (Windows 8).
    Re-install using the HP Printer Install Wizard for Windows .
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hp envy 4500 will not print from windows 8. Thinks it prints, but it doesn't.

    Am trying to print from my Toshiba laptop running Windows 8 to my HP Envy 4500 wirelessly. Works fine from my ipad, works fine from my desktop and laptop running Windows 7. I have uninstalled and re-installed the printer driver 5 times. Printer is recognized, has an IP addrress, and will print an internal test page. When I print to it from my Windows 8 machine, the file goes in the queue, gets a port, and then disappears as if it was printed. Nothing prints. Please help, this is SOOOOOOOOOOOOOOOOOO frustrating.
    This question was solved.
    View Solution.

    Having same problem with my Toshiba laptop windows 8.  Will not print from laptop, printer prints from ipad, and iphone.
    Deleted and reinstalled several times as well both ways with disk, and wizard.
    still unable to print from laptop, have to email everything to ipad in order to print.
    so annoying and frustrating.............

  • HP Officejet pro 8500A plus can not print from ethernet connect computer

    Setup:
    HP Officjet Pro 8500A Plus connected to a netgear wireless router using wired ethernet.
    Desktop with windows7 connected to the same netgear wireless router using wired ethernet.
    Can print from other computers connected to the the wireless router using wifi but can not print from this desktop connected using the wired ethernet.
    Can not print from the Windows7 PC which is connected to router over wired Ethernet. Printer is connected to the same router using wired Ethernet. Other notebook connected to the router over wireless prints.
    Windows7 device & Printerhows printer is ok.
     Once  a job is sent to printer, show status printing for a while after the status will show error.
    Now the status shows error
    HP Print and Scan doctors shows printer ok.
    But if you try to print the test page, unable to communicate to printer error comes.
    Tool box can read all information about the printer

    Please reload the drivers and software on the Win7 PC.  Reconfigure and try again. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • My Officejet Pro 8500 A910 will not print green anymore

    I have a Officejet Pro 8500 A910 and it will not print green anymore. I have done the cleaning procedure and  there is ink in every color. When I print the PQ Diagnostics report  the green box i missing. What can I do?

    Hello FP160,
    I see that this is your first visit with us here on the HP Forums. Please let me take a moment to say "Welcome".
    To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear that you are having some issues when it comes to printing anything in green.  I see that you have also attempted some steps in cleaning the printer.  I am going to give you a document that gives great detail in troubleshooting Print quality / Defective printouts.  This link has different documents that deal with print quality issues.
    One other thing that could be affecting the Ink Delivery System is how you have the power cable connected. If you have it connected to a power bar/strip, please remove it and connect it directly to a wall outlet.  Here is a document that uses a LaserJet printer as an example but it is meant for all HP products in general.  Please click the link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Please write me back if you are still having issues or if you have additional questions.
    I look forward to hearing from you but if it is not today, I hope you have a Fantastic Tuesday.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Officejet Pro 8600 Plus will not print the attached file in the e-mail

    Dear support team,
    I have installed the software and setup HP eprint according the manual respectively the advices in HP-Connected however if I send an e-mail to [edited by Moderator] the printer 8600 PRO PLUS will not print the attached file in this case a PDF. But the text inside the e-mail will printed.
    Any recommends?
    Thank you in Advance.
    Best regards
    Conny

    Hi Conny,
    Welcome to the HP Support forums.  I understand that the attachment to an email sent to your Officejet Pro 8600 Plus printer’s ePrint email address did not print.
    After the PDF didn’t print, did you log into your HP Connected account?  I’m curious as to what HP Connected indicated about the print job. I have included the ePrint Job Did Not Print document.  It has several causes and solutions as to why the PDF didn’t print. 
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Laser Jet Pro CM1415fnw color will not print from eprint

    Laser Jet Pro CM1415fnw color printer will print from laptop but not from email. Signal on printer has strong internet connection and so does computer.  I tried to send a pic with my phone but it did not print.

     I will need a little more info in order to help out. If you send the printer an ePrint of a text document, will it print that plan document? Also, if the picture that you are sending is less than 100 DPI (dot per inch) the printer will not print that because of the quality. You can send the picture to the computer, open it and the right click on it and look under “properties” and it will give you the DPI information.  It is labeled vertical and horizontal resolution. Lastly, what type of phone do you have? What email client are you using to send the picture to the printer? 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • HP Officejet Pro 8500A Plus will not print

    My 2 month old printer will not print unless I open and close the print cartridge door. The printer screen says it is printing, but nothing happens. I have followed all of the steps on line, but nothing works. Anyone else have this problem?

    Does your printer display "Printing..." on the control panel, but never prints?
    I had such a problem. The only way I could get mine to print was to unplug the power cord and plug it back in.
    I found the problem was an "expired" ink cartridge.  I replaced the cartridge with a new one and the problem went away.  Check your ink cartridge statuses by using the Control Panel functions.  If you see one that is expired (my panel displays a yellow exclamation mark on that cartridge's icon), try replacing it and see if the problem goes away.
    My problem occurred whenever the printer went into "standby" mode.  I think when it wakes up it checks the cartridges and when the firmware finds an expired cartridge it locks up.  Just an educated guess.
    Good luck!  And if this helps, please click the Kudos button for me.

  • Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

    Hi All,
    I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is 
    100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
    I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

    Not a reply but another plea for help.
    There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
    -Printer bought about 2~3 weeks into Sept 2012
    -Installed onto Macbook Pro running Lion (full updated at that time)
    -Both wireless scanning from printer to computer and initiated from computer worked fine.
    -Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
    -Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
    -Somewhere along the line it stopped communicating with my MBP
    -Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
    -Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
    -Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
    -Reinstalled HP software from disc.
    Still didn't work.
    -Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
    8600 doesn't list my MBP as available computer to scan to
    [But all the test pages done whilst in HP Utility, and others, get sent through]
    Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
    There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
    Hrumph
    Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
    Thanks,
    Mike W

  • OfficeJet Pro 8600 Plus will not print

    My Macs running 10.10 are not able to print from my printer.  I have reestablished wireless connections and have also ensure the latest updates to the printer were downloaded.  Nothing has worked.  I have also tried to download new drivers but I cannot download them.  After clicking download, the page just brings me back to the select language page.  Anyone else have this issue or know how to solve it?

    Hello, 
     Jamieson
    HP Support Agent
    I have a Macbookpro that stopped printing wirelessly to my HP printer. I tried everything I could think of then an Apple rep worked on it for 45min with no luck. I then followed your suggestions. PRESTO! 
    THANK YOU!
    Neal

Maybe you are looking for

  • Setting alignment of cell content in jtable??

    hi, does anybody know how i can set the content of my jTable cells to the center of each cell. thanx, mischa.

  • Check Table updation

    Hi Folks, Problem statement: how to update the values in look up table [imported as a checktable from R/3]. eg. values in of  material group Can an IDOC [sent, from say a prodn r/3 client]  update the values ? Regards, Vinay

  • ADF - Session Management ? - what is processScope ?

    Hi All, We have recently started working on ADF using .Can any body please explain What are the different ways to manage State other than backing bean. More specifically i want to ask what is processScope? Is it like what we use Session in jsp. One m

  • BOM at line item level?

    Hi, Can somebody please help. I have a template BOM in a sales quote. Now I want to delete some of the child items but it must just show the total price of the remaining child items at ONLY the parent item so in other words they just want to see the

  • Unstable remote access to extreme external hard drive

    Why can't I reliably access a usb hard drive plugged in the back of my airport extreme over the internet? I've bought a new dsl modem (Netgear). I've upgraded to a static ip. This helped for a while. But as far as I can tell, after I access the usb h