Officejet Pro 8500 A910 - Cannot print from WIndows 7 Laptop

Got the printer yesteray and set it up on my wireless linksys network.  Attempted to load software onto 1 month old HP Windows 7 laptop. COuld not find the printer on the network, even though I was supplying the IP.  After much gnashing of teeth, playng with McAffee firewall, downloading most recent printer software, removing and reinstalling software.  I reset the printer on my network and lo and behold I had a different IP.  Laptop could then find the printer.
I can print a test page off of the printers webpage, but receive an error(can be seen in the printer properties page)when attempting to send ANY document to the printer from said laptop.
Any assistance is greatly appreciated.  I do this stuff everyday, and was not expecting problems in setting this up,,,

Similar Messages

  • HP Officejet Pro 8500 A910 - Cannot print wirelessly

    Hello.  I can not print wirelessly.  I have tried all kinds of troubleshooting.  I uninstalled and reinstalled the printer.  I have tried to print from multiple computers.  I have disabled and reenabled the Microsoft firewall.
    I reset the printer to the original specs, and reconnected to the network.  It says it connected fine and it printed out a successful connection page. 
    I ran the HP Print and Scan Doctor which says there are no issues with the printer or connectivity.
    However, whenever I try to print any document (even a test page), the printer reads "Now printing" and just hangs for hours.  No documents print out. 
    My set up is
    Windows 7
    Two IBM laptops, 1 HP laptop, 1 CyberPower PC
    Netgear WNDR 4000 N750 Wireless Dual Band Gigabit Router
    Connected on WPA(2) wireless home network.
    Please help.  I am at a complete stopping point.

    First, restart your router and make sure that it has the latest firmware.
    Next, check your anitivirus - if it has a firewall, disable it.  Windows firewall is rarely a problem.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I cannot get my new hp officejet pro 8500 a910 to print through my vmware fusion over my imac

    i cannot get my new hp officejet pro 8500 a910 to print through my vmware fusion over my imac's airport. My mac prints to this fine and the windows thinks it is printing but nothing. Please help with any suggestions.

    install full feature driver from HP website...
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Officejet Pro 8500 A910 Not Printing & Heads won't clean.

    I have an HP Officejet Pro 8500 A910. It has not been used for about 2 months until yesterday, but was left powered on. The Black, Yellow and Cyan carts were getting a bit low and my wife want to print a few dozen pages of black text. I had a HP 940 Black cart to hand so I replaced it. She printed about 2 dozen Word pages in draft format which uses less ink. They printed OK, but when she went to print more, the print got fainter with each page until they were coming out of the printer totally blank then when the cyan ran out the printer stopped printing blank pages all together. I installed new HP Cyan and Yellow carts, but the printer continued to spit out blank pages. I printed a Quality Diagnostic Page and it showed one column of blocks in Test Pattern 2 missing completely and some white streaks in at least one of the colored blocks. At this point the Ink cart levels were K=90, Y=90, M=50, C=90. The Print Head Health was KY=Good, MC=Good. At this point I ran an Alignment and the report showed all colors except Cyan which was completely missing. I had remembered from a few year ago, that this is one simple way to show if color heads were not printing. I then performed 3 successive level 1, 2 and 3 cleanings, and each time the cleaning report showed less color until only faint yellow showed on the printout. Also the alignment now only shows faint traces of yellow.  I suspect the heads need to be either replaced or removed and cleaned manually. Any suggestions or advice would be greatly appreciated.  Thanks very much in advance. Peter B.

    Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with printing from your Officejet 8500A. I can help with that. This document outlines how to troubleshoot print quality issues with your printer. If that fails then this document will assist you with cleaning the printhead. If after following those documents then the printer itself is going to need to be replaced. You can contact HP support by clicking on this link. On the next page scroll to the bottom and fill out the form. When that is completed you will find some information on how to contact HP directly. If this resolves your issues then please let others know by clicking on Accept as Solution below my post.
    I hope this helps and I hope you have a great day!

  • Officejet Pro 8500 A910 - when printing 3 pages, skips page 2.

    Hi, I have looked on the online help, the printer itself and the print settings but cannot see how to get the printer to collate the pages correctly when printing double sided. At the moment 4 pages print correctly front and back on 2 pieces of paper, however when only 3 pages are needed it will print on page 1, then 3&4 double sided instead of page 1&2 Double sided and a single side on page 3. 
    Any help would be appreciated. We are an office of 5 people working on Mac OSX 10.7.5. Printer is: 
    Officejet Pro 8500 A910

    Hey there Trubbs,
    I have a few more steps in mind. Here they are in order I suggest them!
    Mac OS X: How to reset the printing system
    Repair disk permissions
    Restart your Mac
    Re-add the printer and test again
    Hope that does the trick
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How do I get my HP Officejet Pro 8500 won't print from a program called "The Print Shop 12"?

    I can not get my printer to print from this one program I have called "The Print Shop 12." I don't get an error message, it acts like it want to print but then nothing.

    I do not know about the Print Shop program but I know that sometimes quickbooks has this issue. We have two different work around for this, 1st one  Click your start button go to your printer & devices folder and right click the 8500 printer and either RENAME it or go to Properties to Rename is to OJ8500 and then Apply and safe that change and try it.
    2nd step if that does not work, click start, go back to the printers and faxes and "add a printer" when you get to the list of manufactures click HP or Hewlett-Packard and look for the deskjet ICC printer and add it, naming it PrintShop and then you should be able to printer threw that program.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • HP Officejet Pro 8500 A910 Premium will not fax from computer with Windows 8

    My printer worked great on Win XP and I could fax directly from the printer or from the computer.  I installed Windows 8 32 bit (I'm running an older system that works fine for everything I use it for -thank you very much), and downloaded the latest greatest HP driver & software for Win 8 32 bit.  Everything works perfectly, except faxing from the computer.
    If I run the fax test from the printer, the fax test PASSES.  If I run the fax test from the computer, the fax test PASSES.
    If I put documents in the printer feeder and use the printer fax functions, it faxes beautifully.
    It is only when I fax from the computer, the screen pops up with a status of spooling, then the status turns to Cancelled every time.
    It always worked on Win XP.
    The FAX printer and FAX driver for the FAX printer showed up in Control Panel automatically when I installed the updated drivers/software from HP.  All the properties on the FAX printer look good.
    I tried a usb connection, and a network ethernet connection, with the same results. 
    Printing and scanning all work fine.  I really like this printer, and I would like it even more if I could figure out how to get it to fax a document from the computer.
    When I say fax from the computer, I mean opening a document, saying Print, selecting Fax - HP Officejet Pro 8500 A910, filling in the fax information page, selecting my cover page options, and pressing the send fax.  All just like I used to do before I upgraded to Win 8.  When I hit send fax, that is when I get the popup that the fax is spooling, then it goes to cancelled.  No error codes are displayed, no clues as to why, no nothing.  If I print the document and put it in the printer document feeder, I can fax it using the printer display screen no problem.
    Very bizarre.
    This question was solved.
    View Solution.

    Alright, I spoke with some of the engineers and they suggested the next few steps. First, here is a thread on an MS forum about removing a driver in an alternate fashion.
    http://technet.microsoft.com/en-us/library/cc730875.aspx
    Another thing to note is that in Win8 you can easily access the Command Prompt by hitting the windows key and typing “command prompt.”
    Additionally, I will PM you some further steps on removing the vestiges of the software from the back-end of your PC. You will HAVE to be sure to follow those instructions to the letter.
    Do these two things and let me know what happens after you install the printer again from the direct download link I have already provided above.
    Let me know and have a great day!  

  • HP Officejet pro 8500 A910 won't print wirelessly

    "An error has occurred. (devInfoPage-503)".
    I've had my Officejet pro 8500 A910 for less than 6 months.  It was an easy set up and printed and scanned perfectly for at least 2 months.  I use a wireless connection from my laptop which is running Windows 7.  Then a few months ago I started having problems scanning wirelessly from the printer pad, it would tell me that there was no computer connected. If I went to my laptop and went into the HP Document Manager it would scan the document and save it to my laptop just fine.  And I could still print - the laptop had no problem finding the printer.
    About a month ago I had a really big print job for work.  But I figured this was a sturdy printer and could handle it.  Towards the end though the printer would stop printing for no apparent reasoning with the keypad just showing the spooling circle and saying "printing".  The only way to get it to actually print was to unplug the computer, delete the print job and start again.
    Then for a while I had to do that every time I wanted to print, even after the "big print job" was long over, and still no scanning from the printer (will scan from the laptop).
    I've tried several times uninstalling and reinstalling the software.  I've checked to make sure the printer is included in the "home network".
    Today I reinstalled the software at the Control Panel on my laptop I get the green checkmark meaning the printer is set up and ready to go, but when I try to print a self  test page I get this message "An error has occurred. (devInfoPage-503)".  Any help in solving this problem would be much appreciated.  Thank you so much for your time.

    My Office jet has printed fine wirelessly for 6 months but started to not recognise the computer.  re starting worked for while but now it will not recognise the computer at all.  The computer says  Scanner communication cannot be established and the printer says it sees the computer.
    Why did it work but now won't?
    Thanks,
    Billy

  • Hp officejet pro 8500 a910 does not give me the option of printing in black and white

    Hello,
    My hp officejet pro 8500 a910 does not give me the option of printing in black and white. How do I choose to print in B&W when the option does not show up under properties?
    Thank you.
    This question was solved.
    View Solution.

    Hi,
    From the application being used to print, Click File > Print
    Click Properties or Preferences to access the Printing Preferences Dialog.
    Click the Advanced button at the bottom of the window.
    Under Printer Features, Click the Print as Grayscale selection box and set as High Quality Grayscale or Black Ink Only.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet Pro 8500 A910 printer/scanner/fax

    Dear Forum,
    I have experiencing problem to scan on this product but I can print my work from the computer.
    The message appear from my computer:
    The HP Officejet Pro 8500 A910 was not found.
    The message from the unit HP Officejet Pro 8500 A910 screen:
    No Computer detected.
    To scan to your computer, the HP software must be installed on the computer and configured and the printer must be set up properly on the network or connected with a USB cable.
    - FYI, my computer is not using netwrking cable but it is connected direct to my computer.
    - HP software installed properly or otherwise I cannot print my documents from the computer, the problem I cannot scan.
    Please help.

    Welcome to the forums Joanda!
    I saw your post about the issues you are having with scanning and would like to help!
    Please let me know which model of printer you have:
    HP Officejet Pro 8500A e-All-in-One Printer - A910a
     HP Officejet Pro 8500A Plus e-All-in-One Printer - A910g
     HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n
    Also let me know which operating system you are running on your computer.
    Thank you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printer problems with Officejet Pro 8500 A910

    Dear all,
    I have been given as a present an Officejet Pro 8500 A910 (serie number CN16LDM020 and product number CM756A). The people whom I have got it from already had some problems with the printer heads. I have accepted the printer, because I want to have it working again. I do encounter some problems however. I hope you kind people on the forum can help me out and get this thing working again. As a side note: I am only interested in using the scanner, printer (only black and white - I do not print in colour) and e-printing (I understand that it is possible to email documents to printer, so that they are printed whilst you are somewhere else). 
    Upon installation I have conneted the internet to my wi-fi. Upon installation it made some test prints, whereby the black dots were good, but the cyan and other colours were not. When I now turn off the installed printer and switch it on again it takes the printer about 5 - 7 minutes to initialize. On the touch screen of the printer it is said "Checking printer, this might take 5 minutes", "Checking printheads", "Aligning printheads" and alike notifications. After 5 - 7 minutes the printer gives the following notification: " Failure notice. Alignment failed. Refer to device documentation for details." When I then push the question mark on the touch screen the following notidication is given: " Alignment failed. Check printer quality of the current print job. If it is not satisfactory, try aligning the printer to see if that improves the quality. To align the printhead again, touch (home), touch (arrow right), touch Tools, and then touch Align Printhead." When I follow these instructions, the same thing happens. I have tried the option "Clean printheads" under "Tools". The test prints that come out are again good in black and white and not good in colour. 
    The ink level of the cartridges is very low for Yellow, Magenta and Cyan. For Black the printer gives a question mark. The expiry date of the cartridges is in 2015. The information on the Self Test Diagnostic Page (you get when you print a report from checking the ink cartridges) gives the following status:
    Printhead status
    Printhead health: Good (for both Black/Yellow and Magenta/Cyan)
    Serial: 7735960 (Black/Yellow) and 7744345 (Magenta/Cyan)
    End of warranty: mid-2013
    Accumulated ink usage (ml): Black 99/Yellow 71, Magenta 57/Cyan 58
    Refilled supply:
    Detected in printhead/printer? For all cartidges "yes".
    When I try to print a document from Word on my MacBook (which runs on Mac OS X 10.6.8) and the printer is on stand-by, Word recognizes the printer, starts with the print order but then comes with the notifications "Printer offline" and "Cannot find printer" and postpones the print order. Today I reset the printer and the print job that I had before the reset (which was postponed) came out. 
    Today, I printed a document whilst the printer was not on stand-by (the touch screen was on home menu) and the print was well (it was only black and white). After the print, the printer also made a print report. Again, the colour was bad, but black ink was good. After that print report, the printer started aligning again. After 5 minutes it gave the above-mentioned failure notice (" Failure notice. Alignment failed. Refer to device documentation for details."). 
    I would assume that the first thing that I should do is get new cartridges. However, since I only print black and white, can't I just buy the Black Ink and disable the other cartridges? Then, I am thinking of not buying HP cartridges (since the warranty term is already over). What cartridges do you reccomend (price-quality)? If  new cartridges are installed (previous owner had same problems with full cartridges) and the problems (with print heads) are not solved, what should I do? 
    On a second note, I want to use the option of printing online. In other words, give a print order on my Iphone to the printer so that it starts printing at home. How do I set this up? How can I test this?
    I would be very obliged with your feedback on the above. 
    Kind regards,
    Onno

    Hey Onno,
    I see you have several items listed about your Officejet Pro 8500a (A910 series) printer.  The main issue that stands out is the print quality issue.  I would advise starting here with your printer.  
    From your information I can see that refill or remanufacture cartridges have been used in this printer at some point.  It is possible that the ink from these cartridges have damaged the internal ink system of the printer.  If you have performed all the troubleshooting steps for the print quality issue you are experiencing, then the next step is going to be replacing the printheads of the unit.
    Troubleshooting Print Quality Issues
    The 8500a requires all cartridges be available even if you are simply printing in B&W.  If the cartridges are low, then you will have to replace the cartridges as needed.  Typically by the design of this printer, however, print quality issues do not follow ink levels in the cartridges as ink is piped to the internal printheads, thus even with empty cartridges there is some ink remaining in the system.
    The printheads for the 8500a can be found at most HP certified retailers if you decide to attempt replacing them as a step towards resolving the issue.  As to the cartridges, I would advise using genuine HP cartridges as HP ink is designed with HP printers in mind.  For information about refilled/remanufactured cartridges please click here.
    Hope this helps in getting the print quality issue alleviated,
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Can't install Officejet Pro 8500 A910 on the network in my Windows XP laptop

    Everything installs normally except connection options fail to detect the printer when the network connection is selected. The prompt that follows for network type also fails when wired (Ethernet) is selected. Firewalls are turned off during installation.
    The network printer can be seen by the HP Home Network Diagnostic Utility. Using the HP Home Network Diagnostic Utility to check connection indicates software missing, connection verified, and test print failed.
    The Officejet Pro 8500 A910 Embedded Web Server can be opened from the web browser by entering the IP address.
    Changing the printer port to the IP address allows the printer to work but does not enable all of the all-in-one functions such as scanning or running HP Officejet Pro 8500 A910.exe.
    Turning the power off and back on to the printer, computer, and router did not fix the problem. Re-installing the software several times did not fix the problem.
    The installation works normally with other computers on the same network that run Windows Vista or Windows 7.
    So far, customer support has not been able to help.
    This question was solved.
    View Solution.

    Resolved, not solved. 
    I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

  • My HP Officejet Pro 8500 A910 will no longer print aqua.

    My HP Officejet Pro 8500 A910 will no longer print aqua.  I just tried two new cartridges and when I clean the heads, no aqua prints.  I get no error messages however.
    One possible issue: Recently I used a new HP aqua print cartridge (940XL version) that kept stalling my printer.  If my printer sat without printing for 10 minutes or more, the only way I could get it to print would be to shut down the printer and restart it.  Then, as long as I kept printing, it worked fine.  When I replaced the problematic print cartridge the printer works fine except now it won't print aqua.  Could the problematic cartridge damaged something?
    I looked at the print head and it looks fine.  What is strange is that NO AQUA INK at all shows on the print head page.
    What should I do?  Help!

    Hey @CWickstrom ,
    Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
    I recommend calling HP Technical Phone Support for this issue I believe you will be given options and help I can't.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
    I hope this helps.
    I worked for HP.

  • HP OfficeJet Pro 8500 A910 - Unable to get it to copy, receive a fax, scan, or print

    Dell Studio
    Microsoft Vista .. 64
    HP OfficeJet Pro 8500 A910
    Up until a week ago, this printer was performing just fine.  I am unable to get it to copy, receive a fax, scan, or print.
    ==============================
    Unable to print.
    Job in queue.  printer screen says "now printing",  However, nothing prints. 
    When I tried to reinstall the drivers, I got  ... "Error 0X00000643"
    Ran "EndError" scan and fixed any/all problems.
    Still ... No Joy.  Still .... Unable to print.
    Tried printing a "Test Page".
    Still No Joy !!
    Screen on printer says "Now Printing"
    However, nothing happens.
    Does anyone have a suggestions?
    Thanks In Advance,
    EarlLJ

    Same problem here. Already got it replaced with a refurb machine three times. Was fine for a while, then it started the same problem again. Any idea, before I toss it out of the window?

  • Fax from Win8 on HP Officejet Pro 8500 A910

    I'm trying to fax files from my PC (with Win8) through my HP Officejet Pro 8500 A910 All -In -One. 
    The manual says to choose the fax option in "Print". No such option exists.
    Does anyone know what Drivers or Software to install to get this to work? I can Scan , and print but not fax.
    I downloaded and installed the latest drivers and firmware from the HP website but nothing new shows up in the print option.
    Thanks,
    K
    This question was solved.
    View Solution.

    HI KentHP, I'm glad I was able to help!
    I would recommend page 92 of the HP Officejet Pro 8500 (A909) All-in-One Series User Guide to find information on setting up fax re-dial.
    Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

Maybe you are looking for

  • Exception handling best practice

    whats the best practice for exception handling on ? - BC -controller -view layer (Managed beans) do we have to handle commit operations on BC so we can rollback like this code public void save() // create/update/delete ROW try this.getTransaction().c

  • Mac will only stay on when hooked up to charger - HELP

    As of last week, my MAC just shut down randomly. Once I plugged the charger in, it would turn back on, but the second I take it out of the charger, it shuts off again. For the past week, I've kept the charger in place; however, I can tell it's erodin

  • Sqlj and jdbc for linux

    Hi All, I am currently set up the (tomcat) jsp engine on top of apache web server. And now i would like to install both sqlj and a jdbc driver such that I can query our oracle database. In all of the options for downloads there is a windoze option an

  • NEW SESSION - Firefox, IE and GLASSFISH

    Hi all, Here is my issue: I have One application on Glassfish using EJB3,JPA and JSF. Users can log to this application and have severals sessions opened simultanoulsy as each session is having a connection to its own database How do I force a new se

  • How should the TL be reporting on the CR?

     1)Default on modification which was executed post CH7 discharge, never reaffirmed and no further monetary liability.After mod. default TL's continued to report CH7 status, closed account, 0 balance, etc. for several years (which appeared to be corre