Officejet Pro 8500 does not print

This 8500 is the 4th HP printer that I have owned. Absolutely the worst printer ever. It quits printing, but will not tell you why. Print or copy using the scanner and I get no black ink. Just a blank page with no error message. Put in new ink, same result. I have no idea what to do. Trouble shoot was worthless. Only looking for suggestions for what other brand of printer to purchase.

Hi @Chip-Colorado ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Hp officejet pro 8500 will not print alignment page

Hi, I saw that others on this thread where having similar problems and I was wondering if anyone could help.
I have been having trouble with my HP Office Jet Pro 8500 Wireless (A909g series) printer with the print heads. Initially, it stopped printing in blue so I followed all of the steps for cleaning the print head ect. At one point I had removed the print head and reinserted it and at that point, I started to get the "alignmnet failed" message. I just purchased a new M/B print head, and while it now prints in blue when a test page is printed, I still get an alignment failure notice when it tries to align the print head. In addition, it does not print the full alignment page, only the top colored lines. While I can print, it always runs an alignment afterwards, again failing. I would apprecaite any help you could provide. This printer has been great until now, and I do not want to waste anymore ink trying to print and it failing the alignment everytime. I am running Windows 7 professional. Thank you.

Hello , Welcome to the thread! I understand that your HP Officejet Pro 8500 All-in-One A909a Printer is experiencing Printhead and Alignment failures. Because you have already replaced both the Cyan and Magenta Printhead (twice) and Black and Yellow Printhead in the past and the issues continue to occur over time I believe that the Printhead sensor or print system within the actual printer is going. Should this occur then print system issues, such as Alignment, Printhead, cartridge, quality, etc issues will occur and will usually become worse over time. Therefore, rather then replacing the Printheads it may be time to replace the actual printer. With that being said, there are a few troubleshooting steps that I would like you to complete to resolve this issue. To start, please click here . Once the support document opens please review all of the listed Solutions and sub-steps to ensure that all steps have been completed. Should the issue persist, then a Firmware Update may be needed on your printer. However, I do need to know what Operating System you're using on your computer in order to provide you with the correct Firmware Update. The Firmware is the internal programming within your printer. It controls what your printer does and how your printer does it. If there is a corruption within the internal programming in your machine, your HP Officejet may not respond correctly. Please respond to this post with the result of your Alignment Failed troubleshooting. Should the issue persist, be sure to include your Operating System in your response so I can provide you with the additional Firmware Update. I look forward to hearing from you!

HP OfficeJet Pro 8500 was not printing.

HP Officejet Pro 8500
It started nothing was printed on a paper. Completely white not even a hint of ink.
Ink level were all low. I bought new black and color cartridges and changed it all out. I unplugged all wiring for 24 hours.
I reconnected all wiring. Reboot.
Now the printer screen said alignment failed. Refer to device documentation for details.
I don't know what to do now. Help!

Hello,
Please click HERE to access the steps that should resolve the issue .
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Officejet Pro 8500 A910 Not Printing & Heads won't clean.

I have an HP Officejet Pro 8500 A910. It has not been used for about 2 months until yesterday, but was left powered on. The Black, Yellow and Cyan carts were getting a bit low and my wife want to print a few dozen pages of black text. I had a HP 940 Black cart to hand so I replaced it. She printed about 2 dozen Word pages in draft format which uses less ink. They printed OK, but when she went to print more, the print got fainter with each page until they were coming out of the printer totally blank then when the cyan ran out the printer stopped printing blank pages all together. I installed new HP Cyan and Yellow carts, but the printer continued to spit out blank pages. I printed a Quality Diagnostic Page and it showed one column of blocks in Test Pattern 2 missing completely and some white streaks in at least one of the colored blocks. At this point the Ink cart levels were K=90, Y=90, M=50, C=90. The Print Head Health was KY=Good, MC=Good. At this point I ran an Alignment and the report showed all colors except Cyan which was completely missing. I had remembered from a few year ago, that this is one simple way to show if color heads were not printing. I then performed 3 successive level 1, 2 and 3 cleanings, and each time the cleaning report showed less color until only faint yellow showed on the printout. Also the alignment now only shows faint traces of yellow. I suspect the heads need to be either replaced or removed and cleaned manually. Any suggestions or advice would be greatly appreciated. Thanks very much in advance. Peter B.

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with printing from your Officejet 8500A. I can help with that. This document outlines how to troubleshoot print quality issues with your printer. If that fails then this document will assist you with cleaning the printhead. If after following those documents then the printer itself is going to need to be replaced. You can contact HP support by clicking on this link. On the next page scroll to the bottom and fill out the form. When that is completed you will find some information on how to contact HP directly. If this resolves your issues then please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

Hp officejet pro 8610 | does not print and cannot connect it wireless

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

HP OfficeJet Pro 8000 does not print black

Hi We bought an HP office pro 8000 printer which we have had in the box in a cupboard for the last 14 months (never been opened), I have finally got around to getting it out of the box ans setting it up, however it does not seem to print black only the other colours. The black ink looks fine and I can see it comes out of the cart. HP will not help with the problem as the printer is out of warranty even though it has never been used. Anyone got any idea's why it will not print black
Thanks
Colin

Hi Colin & SubChi
Are you able to generate a PQ Diagnostic page? Any black showing up?
Have you tried running a printhead clean?
More details in the link below
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01962224&cc=us&lc=en&dlc=en&product=3762364&tmp...
Please let me know how you get on,
Kind Regards, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Officejet pro 8100 does not print pages in "back to front" sequence

officejet pro 8100: I cant make it print pages in the sequence last page to first page even tho I have set the default printer preferences to "print back to front" AND I have specified "back to front" for the particular print job.
I am using this 8100 as a WIRELESS printer.
Yesterday it worked OK.:
I did NOT turn the printer off over night.
Today it will only print in first-to-last-page sequence.
I have tried the following:
turned printer off; and then on.
rebooted windows 8.1.
rebooted the router.
confirmed that it WILL print in first-to-last-page sequence for each test.
My test document has 4 pages.

Hi John , I hope you had a good weekend!
I just want to verify:
When you print an 8 page document FRONT TO BACK page 1 comes out on top.
When you print an 8 page document BACK TO FRONT page 8 comes out on top.
Is that correct?
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro 8500 will not print documents/reports for Quicken 2008

New computer will not print in Quicken 2008 Software Program. Attempted all possible solutions. I have Windows 7 installed. I downloaded and installed the new software for HP Office Pro 8500 to work with the Windows 7. The Quicken 2008 Software Program stopped printing as a result. All other software programs prints perfectly. Help! I get no support from Quicken Help.
Message Edited by Tiger-Pope on 10-28-2009 03:38 PM
This question was solved.
View Solution.

Tiger-Pope wrote:
New computer will not print in Quicken 2008 Software Program. Attempted all possible solutions. I have Windows 7 installed. I downloaded and installed the new software for HP Office Pro 8500 to work with the Windows 7. The Quicken 2008 Software Program stopped printing as a result. All other software programs prints perfectly. Help! I get no support from Quicken Help.
Do you have the 64 bit version of WIn 7? This thread suggests printing from the 64 bit Vista (and WIn 7 would be similar) is an issue in Quicken 2008 and 2009. The thread suggests there is a solution but the link requires registering for the Quicken forum and that did not work for me this afternoon.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet pro x64 does not print 2 sided

I set up my hp officejet Pro 8615 printer two days ago,i tired to print 2 sided page i push the the 2 side print button nothing, it only print one side.

Hi @mark04,
Welcome to the HP Support Forums. I see that you would like to know how to print duplex with your Officejet 8615 printer.
I’ve included the Printing on Both Sides of the Paper (Duplexing) for HP Officejet Pro 8610, 8620, 8630, 8640, and 866... document which will walk you through how to print on both sides of the paper.
I hope the above helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Officejet Pro 8500 won't print yellow. No error message. Cartridge not out of ink.

Printer won't print yellow. No error messages. Cartidge not out of ink, but did put in a new one and still won't print yellow.

Ok SLU87...here are some steps you can take that should help with your Officejet Pro 8500 A909g not printing yellow:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01980797&tmp_task=solveCategory&cc=us&dlc=en&la...
Let me know if it helps or not.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Constant Printing Restart on a networked HP Officejet Pro 8500 A909N Series printer

Hello,
I'm curious if anyone has run into this problem before. I have a HP Officejet Pro 8500 A909n Series printer that I have setup as a network printer. This has been accomplished through a print server.
I installed the printer's drivers based upon the cd that came with the printer, in the box.
The problem is that whenever a user prints, say it's a simply one page document... the printer will repeatedly print that single page until it runs out of paper. I have stopped/restarted the print spooler. I've rebooted the printer and the print server. I have deleted the drivers and readded them. I've tried installing drivers from HP's website and then installing those. I have attempted to delete the printer from the server and start from scratch.
When I monitor the print queue, I can see the service restart after each document prints. I can't figure out how to get this to stop.
Does anyone have a suggestion; or has anyone run into this problem? I'm not sure which forum to put this in. I chose the Networks/Wireless forum, even though this is running on a wired network with wireless disabled.
I certainly appreciate any asistance.
-Craig

It ended up being an issue with the port. I had used the same port as the last HP printer that I replaced. This printer needs to run on a TCP/IP port, and not an HP port.
Problem solved.
Oh, and it was wired, with wireless disabled.

My HP Pro 8500 will not print in blue. All new cartridges installed.

My HP Pro 8500 will not print the a blue color, it comes out pint where it should be blue. Installed all new cartridges and still does the same thing.

Hi Calabasas,
Welcome to the HP Forums!
I understand that your printer is experiencing a defect in the print quality, and I would be happy to assist you!
Please follow this document on Troubleshooting Print Quality Issues. If you have completed all of the steps in troubleshooting and the blue still comes out as pink, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Printing with HP Officejet Pro 8500 A909n Series Printer & Apple Air Print

I am trying to use my IPad and print from it through Air Print.
Has anyone had any success in printing from an IPad, using the latest Apple IPad operating system (iOS 4.2) to an HP Officejet Pro 8500 A909n Series Printer?
The documentation from Apple indicates compatibility with:
HP Officejet Pro 8500A e-AiO HP Officejet Pro 8500A Plus e-AiO HP Officejet Pro 8500A Premium e-AiO
Will the 8500 A909n work?
Thanks.

Hi,
Airprint is not supported for HP Officejet Pro 8500 A909m Series.
Thank you.
I am an HP employee
**** Please mark the post that solves your problem as "Accepted Solution" ****

I cannot get my new hp officejet pro 8500 a910 to print through my vmware fusion over my imac

i cannot get my new hp officejet pro 8500 a910 to print through my vmware fusion over my imac's airport. My mac prints to this fine and the windows thinks it is printing but nothing. Please help with any suggestions.

install full feature driver from HP website...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

Hi,
Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Officejet Pro 8500 does not print

Similar Messages

Maybe you are looking for