Officejet pro 8500a a910n error pump stalled

had to replace ink supply all 4 of them.
then i get an error that the pump is stalled.

Sorry to tell you that this normally means that the ink system has failed on the printer
- you can try the steps in this document
http://support.hp.com/gb-en/product/HP-Officejet-Pro-8500A-e-All-in-One-Printer---A910a/4083864/mode...
This may help resolve this.
If not it means you need a new printer
(on the plus side the newer units have a better ink system that produces less waste and the cartridges are cheaper)

Similar Messages

HP Officejet Pro 8500A Plus (Error E0060)

I have a HP Officejet Pro 8500A Plus and when I power it up it shows the HP logo on the screen then the paper feed starts to run then it stops and I get a message saying "Unable to send or recieve fax" then it says Error E0060. Then the another message saying to turn the power off then on again and the screen flashes. Now the printer isn't connected to the computer and I have not put any paper in it. I would like to know what is wrong with it. What do I need to fix it, and how much would it cost to get this lovely printer fixed?

Hi Rossainz, I don't know that I can answer 'what is wrong with it', but I would be happy to help you figure it out and better yet, resolve the issue. Let's first try leaving the printer on and unplugging the power cable out of the back. Leave it unplugged for a full minute during which time you can hold down the power button for just a few seconds to help release and build up power, then plug the power cable back in. If the issue persists, please let me know and we will see what other solutions might do the trick.

Hp officejet pro 8500a - get "error - printing" on all documents

Quick history:
Both my laptop and my printer HP Officejet Pro 8500 A910 have been working happily for months, with wireless connection via Belkin wireless hub.
> Had printer jam errors - so just replaced printer under warranty - completed set-up - printed test pages - wireless connection ok (did wireless test report, albeit signal quality "Very low", but has always been like that and worked in past.)
> Printing word document - just generates error "Error - printing" and stays stuck in queue.
Anything else that has happened in interim ...
> I have installed LiveDrive in the interim to back up all my files on the cloud - works in the background. Can't imagine it's relevant?
> Any help greatfully received, driving me mad!!
Neil

Hi Rossainz, I don't know that I can answer 'what is wrong with it', but I would be happy to help you figure it out and better yet, resolve the issue. Let's first try leaving the printer on and unplugging the power cable out of the back. Leave it unplugged for a full minute during which time you can hold down the power button for just a few seconds to help release and build up power, then plug the power cable back in. If the issue persists, please let me know and we will see what other solutions might do the trick.

HP Officejet Pro 8500a plus ERROR COOE 0060

I opened my printer to fix a paperjam message (it has no more warranty anyways), i saw from forums this was a broken gear issue, in the process to fix this, a new problem began, now in the screen it says C00E 0060, i have readed it could be the pump motor, but does anyone knows what exactly the problem is? when i turn it on i can hear the scanner working, then goes to the blue screen with COOE 0060.
Thanks in advance and sorry for bad english.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n.

I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n. I’m trying to set up HP Connect, but every time I create and account it tell me to log in using my Snapfish password. When I use my “valid” Snapfish password, it comes back asking "invalid password". How do I correct this?
If I'm not on the correct board, please let me know which one I should use.
Thanks
This question was solved.
View Solution.

Hi. You are on the proper board! Unfortunately to fix the account mis-match issue you are having you will need to share personal information. To protect your identify and the security of your account I will private message you with what HP will need in order to get your Snapfish/HP Connected accounts synced up so you can use the web services!
Thanks!
Although I am an HP employee, I am speaking for myself and not for HP

Error message C00E0060 on my officejet Pro 8500A Premium printer

HI, Error code C00E0060 appears on discplay screen brieflky then change to blank display with the icon lights blinking. Powering on and off the printer won't do anything. Can't figure out any solution. I'm not able to use of the printer functions. I'd appreciate any solution you can share me. Thanks

Welcome , I saw your post regarding the problems you are having with your Officejet Pro 8500A premium getting an Error code C00E0060, and I found some information about it.
The error you are describing could be an issue with an ink cartridge or with the printer. To narrow down and determine which is having trouble can you try the following an let me know the results;Remove all of the ink cartridges, does the message change to 'Replace the (K) (C) (M) (Y) Ink Cartridge'?Put only the black ink in, does the message change to'Replace the (C) (M) (Y) Ink Cartridge'?Remove the black and put only one colour ink in, does the message change to reflect the change?Remove the colour, and test each one individually.
When you have the ink cartridges removed, you might want to try a hard reset. To do so, leave the printer on and unplug the power cable from the back of the printer. While it is unplugged, you can hold down the power button on the printer for about 10-15 seconds to release any built up power. Then plug the printer back in and see if the error goes away. If the error message doesn't change when you do any of the above steps, it would mean that it is a fatal error with hardware, as mentioned in this similar post; Error Code C00E0060. Is the printer connected directly to a wall outlet or is it in a surge protector or a power bar? We want to connect it to a wall outlet just so we can eliminate the power source as the root cause. See this document for more information about Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector (Note: This document is not limited to Laserjet printers.) Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

HP Officejet Pro 8500a software stalls after printing one document,

Hi, HP Officejet Pro 8500a, Product No CM755A. It used to work well, but now I can't rely on it to print more than one document. If there is a delay of several minutes before I try to use it again, then no print occurs: the screen on the printer says e.g. 'copying document' or 'printing page 1 of 1', but the printer makes no sound and stays at that stage for ever.
Can I do a soft or hard reset of the printer software in the printer, or solve it some other way? At present I have to turn it off and then on again, wasting ink.
I can take it back and replace it under extended warranty, but don't want to do that if there is a simpler way to fix it.
Regards

Hello Rtdnorseman,
Thanks for the post. It is possible to reset the printer to clear some of these issues. I've included a link below that walks through the steps. Also, ensure that you are plugged directly to an outlet, not into a power strip or surge protector. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03177455&cc=us&dlc=en&lc=en&product=4083969&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Alignment failure - HP Officejet Pro 8500A Plus

I have an HP Officejet Pro 8500A Plus all-in-one printer. The printheads failed and I bought authentic HP printheads (two), installed them and I still get the alignment failure error. The print quality is excellent on all quality and alignment reports that I have printed. What is the problem and what is the solution?
Craigranderson

Hi craigranderson, and welcome to the HP Forums.
I see you are experiencing an alignment failure. I would like to try and help.
I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following the steps in this document on an 'Alignment failed' Error Message Displays on the All-in-One.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Why can't I print to my HP OfficeJet Pro 8500A Plus All-in-One from my wired PC?

I have an HP OfficeJet Pro 8500A Plus All-in-One on my network. My router is wireless, which several of my devices (laptops, ipads, etc.) use to get an internet connection, but I have one desktop PC that is actually wired to the router via ethernet cable. For some reason, when I attempt to print to the 8500 from the wired PC, the doc just sits in the que, eventally registering as an 'error'. But all of my wirelss devices can print to it just fine.
Oddly, this is somewhat of an intermittent issue, as I have printed successfully from this PC before, but I can't right now. I'll also throw this in: I have at times, plugged an ethernet cable into my wireless-capable laptop and had the same issue. But then I just unplug the calbe, reboot, and turn on wireless, and can print without any issues ... so I suspect it has something to do with the fact that the PC is wired to the router.
Don't know if this has anytthing to do with it, but my wireless network is called 'FrogNet', but my wired PC doesn't see 'FrogNet' like all my wireless devices do. It just indicates that this is part of a generic network. Ideas? (All computers run Win7.)

Hi pulind,
Run the diagnostic utility from Message 2 of 5
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Hp officejet pro 8500A plus

I keep getting "cartridge jam" message i remove all cartridges and but back all cartridges. I also check all the places the print says to check for a paper jam in the Show Me explanation on the printer screen. any other solution

Hello there! Welcome to the forums I understand you're facing a "Carriage Jam" error message on your Officejet 8500A Plus. I would like to offer you my own suggestions for this problem. First of all, please click this guide and follow all of the steps:A 'Carriage Jam' Message Displays for HP Officejet Pro 8500A (A910) e-All-in-One Printer Series Please let me know if the steps helped and from there I will continue to look into other options if need be. Have a great day

HP Officejet Pro 8500A Plus - Magenta Not Printing

I have an HP Officejet Pro 8500A Plus (A910), Model number CM756A, Serial number: [Moderator edited Serial Number] that is not printing magenta.
Firmware version: LRP1FN1231AR. Service ID 21057. IK Number 658.
Software version: 028.000.1315.000. Printer Driver version: 09.84.00.1189
The Printhead Status for all cartridges reports as "Good" in the Self Test Diagnostic Page.
I have run a Print Quality Diagnostics and in Test Pattern 2 there is no red/magenta colored block appearing.
I did not have any alert for low print quantity, however I replaced the Magenta inkcartridge with an HP Officejet 940XL new magenta ink cartridge (HP genuine) and still there is no Magenta printing.
When I open the ink cartridge holder, the printer shows HP Model: A910g, HP Ink Cartridge 940.
I have gone through this exercise several times, however the latest Magenta ink cartridge that I removed from the printer prior to replacing had the following information on it: C4908A, 2016/05/22. The newest cartridge I put in has a September 2017 expiration date (part number C4908A).
I am not getting any error messages or anything, there is just no Magenta being printed.
First - I would like to know how to fix this issue with the HP printer.
Second - is there anyway to get a refund for the ink cartridges I have had to use (and waste) trying to resolve this problem.
Thank you.

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Officejet Pro 8500A Plus can't scan to e-mail

I have an Officejet Pro 8500A Plus and Windows 7 32-bit OS and using Outlook 2010. I'm trying to scan to e-mail and am having no luck. From the printer interface I choose SCAN --> COMPUTER --> (MyComputer) --> E-MAIL AS PDF. It performs the scan, but then on my computer, I get the following error:
"The HP Scan application is unable to open your e-mail application and/or cannot attach the scan to a new email. Please check your email configuration and try again."
I've checked the configuration in CONTROL PANEL --> DEFAULT PROGRAMS --> SET YOUR DEFAULT PROGRAMS. I made sure that I selected Microsoft Outlook and clicked Choose Defaults For This Program. I then selected all Extenstions and Protocols and still no luck.
Has anyone else had this problem and found a solution? Thanks. You may be wondering why I don't just use the Scan to Email instead of scan to computer. Well, unless there's a way to import all 400+ contacts from my Outlook to the address book in the scanner, this is the fastest way for me to scan an item and send it as an e-mail to various people.
Thanks.

How do I scan a document and then be able to email it to someone on my HP Officejet Pro 8500a Plus

What is the best photo paper 4'x6' for HP Officejet Pro 8500A Plus e-All-in-one Printer?

1.-HP Officejet Pro 8500A Plus e-All-in-One Printer
2.-OS: Windows 7-64
3.-No error messages
4.-No changes have been made
5.-I have been printing in my with old "hp premium plus glossyphoto paper" and getting very dark photos and too much wasted ink .
I've been using "hp premium plus glossy photo paper" and getting very dark photos.
Before this printer I used a Deskjet 5550 with the same paper and getting great quality.
Thank you. Luis Cuenca
This question was solved.
View Solution.

HI cuencaky,
Here is a link to a page with an example of good 4 X 6 photo paper you can use with your printer.
This type of paper is known to work very well.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

HP Officejet pro 8500A premium, all-in-one printer, scanner problems

I have an HP Officejet pro 8500A premium, all-in-one printer.
Tried uninstalling using the HP supplied uninstall software and installed recommended OSX 10.8 software for this device.
I use wireless scanning. Scanner only scans the first page then shows an error.
Anyone have this problem as well and any possible solutions?
Thanks

The HP Scan works just fine in Mountain Lion for me. Always has.
OfficeJet Pro 8500 A909a
I think the original poster needs to reinstall the latest software for the printer that came with his printer or directly from HP. Then, install the Apple HP updates.
When he unistalled the HP software, it may have removed the software needed for HP Scan to work properly.
The last software I installed from HP was -> HP_Installer_Officejet_Full_Group05_10.3.dmg
Yes, there have been Apple HP updates, but they never stopped my HP Scan from working.

HP Officejet Pro 8500A Plus and Windows 8

Hi all ~
Can anyone tell us what this means and walk us through a fix? (You'll know from the question what our level of expertise is....)
We've had an HP Office Pro 8500A Plus for a couple of years. We just got HP TouchSmart with Windows 8 and while we can print from the computer just fine, we can't scan. When loading the printer CD, we get a message that reads: "install cannot continue....The operating system of this computer is not supported....Upgrade the operating system"
We don't know how to proceed.
Thanks
This question was solved.
View Solution.

Since you are getting an error that the operating system is not supported, you may benefit from going to the HP website and downloading the installation package from there. Here is a link directly to that site (US Version): HP Officejet 8500A Plus Full Feature Software and Drivers.
In this link, you will find all of the software downloads available for the printer.
--Officejet Pro 8500A Plus--
If you are installing the printer with a USB cord, unplug the cord before proceeding. Let me know if I can be of any more assistance.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Officejet pro 8500a a910n error pump stalled

Similar Messages

Maybe you are looking for