Officejet Pro 8500A plus.Continue to get "replace cartridge" message, altho I installed 2 new

I have twice replaced the M Magenta cartridge; yes, I used HP cartridges. I continue to get the replace....cannot print error message.
Each time, it would print one page (color or b&w print) and then message appears again. My printer is 3.5 years old, light use at home.

Hello there! Welcome to the forums @JohnnieMerle ,
I read about the issue you are having with your ink cartridges and the Officejet 8500A plus. I would like to share my suggestion with you so you can troubleshoot the issue.
Click here to get started: 'Replace the following depleted ink cartridge' Message Displays on the Product after Installing a Ne...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

HP OfficeJet Pro 8500A Plus - By passing expired Color Cartridges to print only in Black printing.

Hi,
Problem:
fIt seems that this model of printer has a built in protocol which makes the printer inoperable if any of the colour cartridges are past their expiry date. Attempts to print solely in black are also being prevented because of this.
Does anybody know how permit black printing only without the need to replace colour cartridges rarely used.
Apple Mac PCs and laptops are connected to the printer wirelessly.
I look forward to any info which rids me of this frustrating problem.

Hello popkc, and welcome to the HP Forums.
I see you are looking into ink options. Due to the design of the printer, it does require functional ink as to not cause damage to the print system. There is no way to override this.
Please let me know if you have any questions. Thanks for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I am unable to get my officejet pro 8500a plus online,

my officejet pro 8500a plus used to work fine, but recently it is connected to the internet, as is my laptops, but not online - blue light is out. I even brought a new laptop and still cannot get printer online - so obviously a printer error!! Please help as very frustrated!!

Please provide the following relevant information so someone can help including:
Printer Model - done
Detailed Problem Description -
Operating System of computer (including service pack revision) - done
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns?
If wireless, when the problem occurs, what is status of Blue Wireless light on printer, on, off or blinking? -
Just want to verify the blue wireless light status again. Can you print out a network config sheet and tell us what the status of the wireless radio is?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Officejet Pro 8500A Plus - Magenta Not Printing

I have an HP Officejet Pro 8500A Plus (A910), Model number CM756A, Serial number: [Moderator edited Serial Number] that is not printing magenta.
Firmware version: LRP1FN1231AR. Service ID 21057. IK Number 658.
Software version: 028.000.1315.000. Printer Driver version: 09.84.00.1189
The Printhead Status for all cartridges reports as "Good" in the Self Test Diagnostic Page.
I have run a Print Quality Diagnostics and in Test Pattern 2 there is no red/magenta colored block appearing.
I did not have any alert for low print quantity, however I replaced the Magenta inkcartridge with an HP Officejet 940XL new magenta ink cartridge (HP genuine) and still there is no Magenta printing.
When I open the ink cartridge holder, the printer shows HP Model: A910g, HP Ink Cartridge 940.
I have gone through this exercise several times, however the latest Magenta ink cartridge that I removed from the printer prior to replacing had the following information on it: C4908A, 2016/05/22. The newest cartridge I put in has a September 2017 expiration date (part number C4908A).
I am not getting any error messages or anything, there is just no Magenta being printed.
First - I would like to know how to fix this issue with the HP printer.
Second - is there anyway to get a refund for the ink cartridges I have had to use (and waste) trying to resolve this problem.
Thank you.

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8500A Plus and Windows 8

Hi all ~
Can anyone tell us what this means and walk us through a fix? (You'll know from the question what our level of expertise is....)
We've had an HP Office Pro 8500A Plus for a couple of years. We just got HP TouchSmart with Windows 8 and while we can print from the computer just fine, we can't scan. When loading the printer CD, we get a message that reads: "install cannot continue....The operating system of this computer is not supported....Upgrade the operating system"
We don't know how to proceed.
Thanks
This question was solved.
View Solution.

Since you are getting an error that the operating system is not supported, you may benefit from going to the HP website and downloading the installation package from there. Here is a link directly to that site (US Version): HP Officejet 8500A Plus Full Feature Software and Drivers.
In this link, you will find all of the software downloads available for the printer.
--Officejet Pro 8500A Plus--
If you are installing the printer with a USB cord, unplug the cord before proceeding. Let me know if I can be of any more assistance.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Ink/Cartridge issue with my OfficeJet Pro 8500A Plus

My OfficeJet Pro 8500A Plus has been drinking color ink. We rarely print color, as we purchased this unit for its fax/copy capabilities (almost all B&W). Upon recent replacement of the Cyan and Yellow cartridges, the system refuses to operate. The status on the Cyan cartridge has a question mark "?" and reads empty. This is a brand new cartridge. Upon pulling the cartridge, it clearly has ink in it. There seems to be a lot of ink build up in the port where the cartridge connects to the printer.
The Yellow cartridge status reads empty with an exclamation point "!". This is also a new cartridge. No sign of leakage, when I pulled the cartridge to examine.
What do I need to do to "fix" this situation, as I need the unit to be operational to receive faxes. If the unit is beyond (my) repair, can you suggest a replacement printer that uses the 940 series of ink cartridges, as I have a small stockpile of them.
Thanks and Kind Regards,
Steve

I have the same problem! The 8500A Plus (A910g) won't print after I replaced with a new magenta cartridge. I get the following message "replace the following depleted ink cartridge to resume printing." I bought another HP cartridge from best buy and got the same message. I then took all the cartridges out and noticed at the base of the cartridges slots that it was a pool of redish pinkage ink in all cartridge slots. It is like the magenta ink port is wide open and depleting the ink within seconds. What is going on here, a defect in the printer?

HP Officejet Pro 8500A Plus printing issues

I have been having two new issues suddenly (within the past 2 weeks) with my HP Officejet Pro 8500A Plus. I am trying to print from my iMac 27 inch running OS.X 10.8.4 Both the mac and the printer are connected to a wireless network via an Xfinity Wireless Gateway. I have just replaced the ink cartridges in the printer but am unable to print black & white. In fact everything is comming out kinda pink. I have posted on HP's support site and was told to
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Having done that initially my problem was solved. But now I'm having the problem again. I went through the above steps again, but still not able to print. Are there any suggestions for a fix. Is anyone else seen this issue? Is there a particular printer manufacturer that works well with Apple. Because at this point I have a large paperweight that is of no use to me!

The fact that it was solved and then came back points to some (unknown) issue with your Mac's software.
Try these generic fixes first (and then do the reset printing system and re-add again):
http://support.apple.com/kb/ts1417
(one of the three methods - I like Disk Utility best - you can also repair disk permissions while there.)

Alignment failure - HP Officejet Pro 8500A Plus

I have an HP Officejet Pro 8500A Plus all-in-one printer. The printheads failed and I bought authentic HP printheads (two), installed them and I still get the alignment failure error. The print quality is excellent on all quality and alignment reports that I have printed. What is the problem and what is the solution?
Craigranderson

Hi craigranderson, and welcome to the HP Forums.
I see you are experiencing an alignment failure. I would like to try and help.
I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following the steps in this document on an 'Alignment failed' Error Message Displays on the All-in-One.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Why can't I print to my HP OfficeJet Pro 8500A Plus All-in-One from my wired PC?

I have an HP OfficeJet Pro 8500A Plus All-in-One on my network. My router is wireless, which several of my devices (laptops, ipads, etc.) use to get an internet connection, but I have one desktop PC that is actually wired to the router via ethernet cable. For some reason, when I attempt to print to the 8500 from the wired PC, the doc just sits in the que, eventally registering as an 'error'. But all of my wirelss devices can print to it just fine.
Oddly, this is somewhat of an intermittent issue, as I have printed successfully from this PC before, but I can't right now. I'll also throw this in: I have at times, plugged an ethernet cable into my wireless-capable laptop and had the same issue. But then I just unplug the calbe, reboot, and turn on wireless, and can print without any issues ... so I suspect it has something to do with the fact that the PC is wired to the router.
Don't know if this has anytthing to do with it, but my wireless network is called 'FrogNet', but my wired PC doesn't see 'FrogNet' like all my wireless devices do. It just indicates that this is part of a generic network. Ideas? (All computers run Win7.)

Hi pulind,
Run the diagnostic utility from Message 2 of 5
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

My iPhone and my iPad are connected by wi-fi, but I can't print on HP Officejet Pro 8500A Plus. On the other hand, I can print over wi-fi from PC. What can I do?

Hallo, thank you for trying to help. Here is my problem:
In the past, the airprint was possible without problems from iPhone 4 and iPad 2. Since today it doesn't work anymore. My iPhone 4 and my iPad 2 is connected by wi-fi and I can serve in the internet. But I can't print on HP Officejet Pro 8500A Plus. On the other hand, I can print over wi-fi from PC.
There are low ink-levels and therefore a message comes to indicate this by printing from PC. iPhone and iPad are accepting the print order without any messages after, but does't excecute the print.
What can I do?

Hey helmut,
You can also try the ePrint method listed here if you can't get AirPrint working:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641898&cc=us&dlc=en&lc=en &product=4116838&tmp_track_link=ot_search
The application HP home and biz app is free in the app catalogue!
Hope this helps.
I work for HP.

Officejet Pro 8500A Plus can't scan to e-mail

I have an Officejet Pro 8500A Plus and Windows 7 32-bit OS and using Outlook 2010. I'm trying to scan to e-mail and am having no luck. From the printer interface I choose SCAN --> COMPUTER --> (MyComputer) --> E-MAIL AS PDF. It performs the scan, but then on my computer, I get the following error:
"The HP Scan application is unable to open your e-mail application and/or cannot attach the scan to a new email. Please check your email configuration and try again."
I've checked the configuration in CONTROL PANEL --> DEFAULT PROGRAMS --> SET YOUR DEFAULT PROGRAMS. I made sure that I selected Microsoft Outlook and clicked Choose Defaults For This Program. I then selected all Extenstions and Protocols and still no luck.
Has anyone else had this problem and found a solution? Thanks. You may be wondering why I don't just use the Scan to Email instead of scan to computer. Well, unless there's a way to import all 400+ contacts from my Outlook to the address book in the scanner, this is the fastest way for me to scan an item and send it as an e-mail to various people.
Thanks.

How do I scan a document and then be able to email it to someone on my HP Officejet Pro 8500a Plus

HP Officejet Pro 8500A Plus e-All-in-One (A901g)

I'm thinking about getting a MacBook...would the "HP Officejet Pro 8500A Plus e-All-in-One (A901g)" work well with this and for what i need?
I need an All-in-One...I have an iPhone, so I would like the Air-Print feature...and since I might be getting the MacBook, I would like a printer that is wireless. I also want something that is good for printing quality pictures.
It appears this printer has everything i am looking for, but it doesnt say anything about being wireless...does anyone know if it is or not?? if not, can anyone recommend a printer for what i am looking for?
thanks

Also is this printer quiet? I am considering this for a library setting, and don't need a noisy printer! Thanks.

What is the best photo paper 4'x6' for HP Officejet Pro 8500A Plus e-All-in-one Printer?

1.-HP Officejet Pro 8500A Plus e-All-in-One Printer
2.-OS: Windows 7-64
3.-No error messages
4.-No changes have been made
5.-I have been printing in my with old "hp premium plus glossyphoto paper" and getting very dark photos and too much wasted ink .
I've been using "hp premium plus glossy photo paper" and getting very dark photos.
Before this printer I used a Deskjet 5550 with the same paper and getting great quality.
Thank you. Luis Cuenca
This question was solved.
View Solution.

HI cuencaky,
Here is a link to a page with an example of good 4 X 6 photo paper you can use with your printer.
This type of paper is known to work very well.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

HP Officejet Pro 8500a plus Full-full Reset

I have this same problem:
http://h30434.www3.hp.com/t5/Other-printing-questions/HP-8500A-premium-a910-The-touch-screen-will-re...
i tried partial reset and semi-full reset but doesnt work for me,i hope someone knows a way to do a full-full reset like this:
http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Officejet-8500-reset-help/m-p/170462
but for my HP Officejet Pro 8500a plus
Thanks for support
This question was solved.
View Solution.

I am still having this problem with my printer. It worked for a few months just fine, now it hangs every time it sits for more than a few minutes.
{Content Removed: Confidential information}
When I do this, nothing happens. If I press & hold the power button the power light comes on, but the screen stays blank. Pressing the button combos you suggest on the blank screen does nothing. Am I doing something wrong?
UPDATE:
OK, I got into the menu. I didn't have to do the 5 second power button thing. {Content Removed}
I have been playing around in this new menu and have discovered that if I place the printer in MFG mode, it responds and prints even after going to sleep (but the print quality is bad). When I place it back in USER mode, it goes back to not printing after a few minutes. For now, I am just running the printer in MFG mode unless I need to print something with high quality. I really hope they can get a firmware update to fix this thing or it's going to be my new boat anchor soon.

HP OFFICEJET PRO 8500A PLUS on Windows 2003 Server

I'm trying to install the Windows 2003 driver for the HP OFFICEJET PRO 8500A PLUS but the installtion halts and says the operating system is not supported. The O/S is fully patched. Does anyone have a go around for this? I simply need it for Terminal Services users.

Where did you get the driver pack from? Also are you running a 32 or 64 bit version of Windows 2003 Server?
This is the version of the driver pack you need: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-105951-1&cc=us&dlc=en&lc=en...
Let me know if this is what you already downloaded and also the questions from above.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Officejet Pro 8500A plus.Continue to get "replace cartridge" message, altho I installed 2 new

Similar Messages

Maybe you are looking for