OfficeJet Pro 8600 and OfficeJet Pro 8630 Tray 2 missing

Hi All,
Today we have released the software patch for Tray 2 missing for Officejet 8600 and Officejet 8630 all in one printer
Go to www.hp.com>> Click on Support>> Download drivers
Type in your product model no Eg Officejet 8600, Officejet 8630......
Select the product
Select the operating system(10.10 Yosemite) and click next
You will find the pkg file under the Update
1- First download and install the Full Feature Software for the product from hp.com.
Note: If you have already installed the full feature software you can skip this step.
2- Now go to Update Section and Click on the link hp-printer-essentials-S-4_1_0.pkg.
It will automatically download, once completed double click and follow the onscreen instruction.
This should resolve the Tray 2 missing issue.
Thanks
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

Hi,
You need an attachemnt which your printer does not have and it is not designed to accepte it to be able print on CD's, DV's, BD's ..
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • OfficeJet Pro 8600+ and Inkjet Printable BD-R

    Hello All,
    I have an OfficeJet Pro 8600+ and bought some Inkjet Printable BD-R by HP. I can't figure out a way to print on these disks from the printer I have. I don't see how the disc can be pulled from the standard paper tray as that requires the flexibility of paper to make the bends along the normal path. Is there some secret door I can't find?
    I really just bought the discs for the storage and discovered the inkjet capability after I bought them. So it's not a big deal, but I'd like to take advantage of this and overcome the hazard of my crappy handwriting on discs.  :^)
    Steve
    This question was solved.
    View Solution.

    Hi,
    You need an attachemnt which your printer does not have and it is not designed to accepte it to be able print on CD's, DV's, BD's ..
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes

    I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes.

    Hi there cv4928,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and what application will we be printing from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Officejet Pro 8600 and/or Plus: differences.

    Hi all, simple question.
    What's the difference, beside shape, little speed up and LCD screen, between:
    HP Officejet Pro 8600 HP Officejet Pro 8600 Plus
    Can't really find out if the second is worth 50 euro more.
    Also, do HP drivers work well with OS X?
    Thanks
    This question was solved.
    View Solution.

    Hi,
    For more info you can also refer the link below.
    http://reviews.cnet.com/multifunction-devices/hp-officejet-pro-8600/4540-3181_7-35060509.html?rid=35...
    If your post has been solved mark the same as solution provided which makes it easier for others to view and dont forget to click kudos.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • Mac Pro 2013 and Premiere Pro - The performance issue that Adobe don't want us talking about!

    In May 2014 I bought a 2013 Mac Pro to help my business with the ever increasing demands video editing was placing on our systems.  I was so excited to see how the 12GB of power the AMD D700s would affect my workflow and ability to edit footage seamlessly without delays to the creative process.
    However, to my dismay pretty much since starting to work with the system I found that there was an issue with the GPUs, Mac OS and Adobe’s applications.  It was first reported by many other users in early 2014 and as yet know one from Adobe has really commented officially on the issue.
    Sadly it appears to still be present today and speaking with an Adobe rep confirmed this.  Trouble is no one is doing anything about it.  My hope is that, if you have watched this video and are experiencing the same issues then please let’s get the comments going, share and like the video and let’s get Adobe, Apple and AMD to pick up this with immediate haste! Thank you.
    Below is a video of the problem I have been experiencing.  It's a little long but I wanted to give a good account of the problem we are seeing so that someone can help! PLEASE, PLEASE, PLEASE help!
    Mac Pro 2013 and Premiere Pro GPU Issue - YouTube
    Thank you for your time and I'd love someone to help!

    Thanks for responding!  It's such a pain and I have been chatting to one of Adobe's senior consultants about this and still none the wiser.  I have sent my machine off to the retailer as it was still under warranty.  Nothing wrong with GPU apparently which is a relief although I kinda wish it had been that as it would have been an easier fix.  Adobe told me that working with H.264 is totally possible but if you have a complex sequence with multicam and nested video with effects applied then it will seriously hinder performance.  Sadly transcoding to ProRes doesn't seem to help either and they suggested not adding any effects to the nested clips, flattening out the multi cams etc and this has improved things a bit.  Sent a sequence to SpeedGrade the other day though and the machine had a fit.  FCPX though seems to be working great and has a few advantages over Premiere so I may be making a switch for this type of work until Adobe can sort out this issue.  I still feel that the application isn't fully making the most of the GPUs.  In fact, I found out that multicam is actually all still on the CPU and that they are trying to implement GPU handling of multicam soon.

  • Two version of PP on my updates, PP Pro CC and PP Pro CC (2014)  Why two? What's the diff?

    I seem to have two version of PP Pro and don't know why. There's Premier Pro CC and Premiere Pro CC (2014) Are they different versions? Are they doubled up? Should I get rid of one? I'm trying to clean my computer anyway and streamline everything so I don't want extraneous programs. 
    I also have InDesign CC (2014) Install and InDesign CS6 Update options. Are these different? If I install (2014) will it replace CS6 so I only have one of those?
    Using a Mac, latest Yosemite version, 10.10.1
    Thank you!

    When Adobe came out with the Cloud the intention was to retain one version and update as developments occured.  THey failed to meet that goal and ended up producing the CC 2014 version which is additional to the original CC.  If you do not want the original CC you can remove it.  If you have InDesign CC 2014 and know that you pay a subscription for it then you can get rid of the CS6 version.  Some people prefer to hold on to older versions in the event they need to create an older version to return to their clients (who don't have the newer version).

  • Can you run Logic Pro 8 and Logic Pro X on the same machine?

    Hello all!
    Congratulations to us on the release of the new Logic Pro!
    I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!).  I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
    As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
    I am planning my Logic Pro and Mac OS migrations!  Thanks!!

    Try here:
    https://discussions.apple.com/community/professional_applications/logic_pro
    This forum is FCP X.
    Al

  • Officejet pro 8600 won't scan through tray

    Good morning,
    My printer won't scan anything through the the tray on top. I currently have an "HP Officejet Pro 8600" that I use for my mac. When I first set it up over 6 months ago I had no problem scanning anything through the tray on top but now after upgrading to Yosemite I have had nothing but problems. When I first installed Yosemite I wasn't able to print or scan but after fixing it with some updates I'm still not able to scan any documents through the tray only through the glass scanner I can scan things.
    Any Ideas?
    Also when I choose HP scan it wont let change the presets from pictures to documents until after I have scanned something through.
    This question was solved.
    View Solution.

    I followed the steps with The Automatic Document Feeder (ADF) Does Not Pick Up Paper - cleaning the rollers and it fixed it. Thank you!

  • Officejet Pro 8600 Plus ...paper TRAY wont close all the way?

    My Officejet Pro 8600 Plus paper tray will not return to the proper position. This has happened TWICE now, and always about 3 weeks into using it...
     I returned the first printer and replaced it with the same because we love the features and ease of use. But now,  AGAIN?? 
    I tried printing with it hanging out this time..it will print, but ....COME ON!  It makes it real hard to pull out the tray that my paper lays on after printing!
    I called HP support the first time, he couldnt help me. Just said replace it.  There has to be something I can do a button or something?  I cant see it..does anyone else know?

    Zadora wrote:
    Unofrtunately useless information. By trial and error I have found the only way to replace the tray is to lift the entire printer from the front at about a 20 degree angle and then the tray slides in. Very defective design. Never buy another HP.
    It is possible you have a defective unit, I would suggest you Contact HP for service.
    It may not be any consolation for you, but the tray works fine on my Officejet 8600 Pro Plus.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hp officejet pro 8600 and macbookair

    My HP officejet pro 8600 was picked up by my new MACbook air without a problem, however each time i go to print or scan it will not connect unless I power off and on the printer. Then it works fine until next time I go to print-- I have to do same thing?? Any thoughts

    Hi @sprtssurg,
    Thank you for visiting the HP Support Forums! I see everytime you try to print and scan, you need to power off and on the HP Officejet Pro 8600. I notice you said your MacBook Air running the Yosemite 10.10 Operating system picked up the OJ 8600 right away, does this mean you did not install the full feature software and drivers or did you just install using the AirPrint Driver?
    Leave me with the following information:
    1. What is the Exact model of HP OJ 8600 Printer are you using, as there are a few in the 8600 series?
    2. Do you get any error messages on the Mac, printer offline etc.?
    3. How is the printer connected, USB or Wireless?
    I hope to hear from you soon, so we can begin troubleshooting.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Driver Issues with HP Officejet Pro 8600 and Windows 8

    I have to reinstall the printer driver for my HP Office Jet Pro 8600 wireless printer each time I power up my laptop. I do not have any issues with this printer when using my PCs and my antroid tablet.  Once the driver is reinstalled I can print my documents however it becomes "offline" whenever I log off and then log back onto my laptop.

    Hello there! Welcome to the forums @Shrn 
    I read your post about how your printer will disconnect and show offline on your laptop, each time the computer is restarted. As this only happens on your laptop, the problem could be with a firewall running on your computer.
    I would suggest checking your firewall settings and ensure you're allowing the printer to connect within the firewall.
    This link may help: How to Edit Firewall Settings
    You could also try running the Print and Scan Doctor when you restart your computer to see if this tool will pick up the printer on the network and connect it to your computer again.
    Another option, would be to try a Clean Boot, which will turn off all Start Up Programs on your laptop to see if another program could be blocking the printer from connecting to it during a restart. Make sure to go back and enable the programs again after you have tested this out.
    Let me know your findings and what happens!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Best way to scan from office jet pro 8600 to mac pro and attach to email

    What is the best way to scan from an officejet pro 8600 printer to a mac pro desktop, attach and scan?

    dunno if you can do it directly, but, assuming the drivers are up-to-date, use Image Capture*, which should get you  a scan, then save it, then when sending the email, click on the paperclip,  and choose whatever it was that you scanned, wherever you saved it....
    and then send it.
    JB
    *Preview might work, but I don't recall 100% if it does...
    don't recall seeing anything that'd let you scan something in, then have it go directly to email and send it out, one-step

  • XDCAM HD workflow with Adobe Premiere Pro CC and Macbook Pro

    Hi folks,
    I have an assignment for a TV production to secure and convert the data (mxf files XDCAM HD 422 1080i 50 / 50 Mbit/sec with 8 audio channels) from Sony XDCAM camcorders (PDW-700) for postproduction.
    The producer wants me to convert the mxf files during production to Apple ProRes 422 (HQ) for faster and smooth editing during postproduction.
    I'm not sure about the final output yet, but I guess it will be either 720p50 or 1080i 25, since the production will be broadcast and as far as I know this is the standard for HD on German television. It is also not clear which NLE will be used for editing (usually one of the producers edits their projects with FCP, but this time they've got their hands full and are still looking for someone to outsource postproduction.
    Unfortunately, my Macbook is getting fixed as we speak, so I can't try things out.
    Since this is the first time I'm doing this workflow, could someone please check if I got everything right?
    1. Can someone please confirm that I can actually convert the mxf files using AME CC to Apple ProRes 422?
    Or do I need to install any other tools/converters for this task? Does MPEG streamclip do the job? Any other freeware?
    2. When converting to Apple ProRes422, the producer suggested to deinterlace the footage (1080i 50) to 25p, if 720p or 1080p I have to find out tomorrow since our conversation got interrupted this afternoon.
    In my opinion this doesn't make sense, though. First, if output to 1080i 25 it has to stay interlaced anyway. Second, in case the output will be 720p 50 I would edit the footage either natively or in Apple ProRes 422, but leave deinterlacing until the very end when outputting to the final format. This way I could use an advanced deinterlacer, e.g. the one from Magic Bullet Suite, rather than just checking some deinterlace box in the export settings for Apple ProRes 422.
    The reason the producer suggested to deinterlace right away when using  an intermediate like ProRes was that she and the client got irritated by the jagged lines from the interlaced footage when editing the last project with the same requirements on a progressive display.
    3. What would be the best solution to tackle this issue (jagged lines) during editing?
    As I said my Mac is getting fixed, so I have no way of trying things out,and I usually edit DSLR footage which is progressive anyway.
    But if I remember correctly I can switch my monitor between 1080p and 1080i. This should do the trick, shouldn't it?
    4. Can I keep all of the 8 audio tracks when converting to ProRes using AME CC ?
    5. Is ProRes422 (HQ) really necessary, or is the regular quality sufficient for this kind of job?
    6. Let's assume the whole project would be edited within Adobe Premiere Pro CC and  system specs as stated below:
    Since Adobe Premiere Pro CC has native support for  XDCAM HD is there any advantage of using an intermediate like ProRes at all?
    How smooth is native editing with XDCAM HD in Premiere Pro CC? I don't think there will be more than 3-4 video tracks in use...
    Thanks for your help!
    working with
    Adobe Premiere Pro CC and Adobe Media Encoder CC
    Apple MacBook Pro
    Intel Core  i7 Quad Core Prozessor
    2.3 GHz and 6MB L3 Cache
    16 GB RAM 1600MHz DDR3,
    256 GB SSD
    Intel HD Graphics 4000 512MB + nVidia GeForce GT 650M with 1 GB GDDR5 RAM

    Thanks Jim! I knew there must be a reason xdcam is widely uses for eng aquistion :) I think they used FCP 6 or 7 on their last project... So what about monitoring interlaced footage on a progressive screen? Any advice on that? Is there a converter built in to APP CC that deinterlaces in realtime when monitoring interlaced sources on a progressive screen? And would you agree that deinterlacing source material is best left right before outputting?

  • Acrobat Pro XI and Acrobat Pro 9 Simultaneous Installation

    Greetings -
    At our institution we have a contract to license Adobe Acrobat Pro XI and related projects.  I have a constituent whose computer now has Adobe Acrobat Pro XI, but he would also like to install Adobe Acrobat Pro 9.  Can both products coexist?
    Anthony -

    Hi mullenanthonyj ,
    Thank you for posting on the Adobe forums, firstly you would not be able to install Acrobat 9 over Acrobat 11.
    Secondly Adobe does not recommend installing two versions of Acrobat together on one system, i might create unexpected behavior in functionality
    Thanks,
    Vikrantt Singh.

Maybe you are looking for