Officejet pro 8600 copy cancelled

When I try to copy on my Officejet Pro 8600, a message pops up that says "copy cancelled", and about an inch of the document is copied at the top of the page. The rest is blank. I've reset the printer. What else can I do? Thank you!

Hey @ErikaS ,
Welcome to the HP Forums!
I see you're having problem copying with your OfficeJet Pro 8600 printer.
When you performed the reset did you do it with the power button, or a hard reset by removing the power cord while the printer was still powered on?
If you used the power button, please try a hard reset. With the printer powered on remove the power cord. Wait at least 30 seconds and plug it back in. The printer should turn itself on. After this, try a copy.
If the issue persists, make sure the printer is plugged directly into a wall outlet. Not a surge protector, power strip, or extension cord. I know this sounds crazy, but HP printers work best when connected directly into the wall.
Let me know if either of those help.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Similar Messages

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

HP Officejet Pro 8600 Premium will not copy or scan.

Hello,
I have a HP Officejet Pro 8600 Premium that prints just fine however it will not copy or scan. When I attempt to copy a document it displays Starting Copy... on the printer but will not copy and must be turned off and on to use the printer again. When I attempt to scan it brings up an error box telling me to check all of my network connections.
I have already tried the services.msi fix and have ran hp printer and scannor doctor tool to attempt to fix my problem.
In the services.msi I found that all services dependant on (WIA) were already running and set to automatic.
The scan doctor found that It wasn't communicating with the drivers, which I then reinstalled, and restarted the computer. It then continued to have problems with the drivers and asked me to contact support.
Thank you for your time.
edit: The printer is also running the latest firmware and I have also checked my anti-virus firewall so that it is allowing the printer through network. (note: in attempt to fix the issue i have both a usb and network connection trying to get either connection to work).

Hi-
To make sure I understand this correctly, you are unable to do a copy at the device itself? This should function without the device being connected to a PC at all. if this is indeed the case, it sounds as if this is a hardware issue. I would then check with HP support on your product for warranty repair.
I am an HP employee, however, this content reflects my personal opinion and is in no way associated with HP.

HP Officejet Pro 8600 fax from computer will not fax more than one page without canceling job

HP Officejet Pro 8600 MFP running on Windows 7 64 bit. I purchased this printer almost a month ago. The install was simple and straight forward with no apparent problems but when trying to fax from computer the program seems to be only able to fax one page faxes. Any multiple page faxes will show a message "spooling" for 10 to 15 seconds then it will cancel the entire fax. I have tried this in both wired and wireless modes with the same results. I have sent 30 page plus faxes from the printer without any problems, it is only the fax from computer that seems to have memory issues. Any solutions out there?

Have you tried updating the firmware on the printer?
If not, here is a link to the most recent firmware:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-101905-4&cc=us&dlc=en&lc=en...
Try that and let me know if it helps to resolve your issue.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Officejet Pro 8600 Plus N911 Tries to Copy from ADF if Lid Covering the Glass is Completely Open

Hi,
I just posted a reply to the following regarding an identical problem that I am having:
http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Officejet-Pro-8600-N911n-Printer-Tries-to-C...
It occurs to me, however, that the original post I replied to is so old that it is probably better to post my problem in a new thread.
I've borrowed some of the original poster's wording since his explanation of the problem was very clear and concise...
If I have the lid that covers the glass completely open on my HP Officejet 8600 Plus (N911) printer then it usually tries to feed pages from the ADF to copy and then reports a jam since I have not put anything in the ADF. If I partly or completely shut the lidthen it copies from the glass properly. This problem arises when I want to copy pages from a thick book for which it is very incovenient (and not really possible) to hold the book firmly in position with two hands while closing the lid with a third hand.
I think the problem is that the ADF sensors that detect when the ADF is loaded with paper are normally held in the position indicating no paper by gravity. When the lid is completely open it goes past 90 degrees, so gravity causes them to be fall into a position where the sensors are tripped.
We contacted Courtney, a Case Manager on the "HP AMS TCO Escalations Team" and she insisted that the 8600 is able to copy from the glass with the lid open and that our unit must be defective. She sent a new unit, but it had the same problem since it is a design flaw, not a manufacturing defect. When we called her back she did not seem to concerned that the 8600 could not copy with the lid open and did not really want to pursue our problem any further. We asked whether we could switch to an equivalent model that can copy with the lid open, but she said that the 8600 is their top-of-the-line model and there is no equivalent model. In the end, she offered to "buy back" the printer.
Has anyone else had this problem? Is there any fix so that I can copy with the lid completely open? Perhaps a firmware update so the printer realizes that if the lid is open then it should ignore the ADF? I would even be OK with a menu item that lets you disable the ADF.
Does anyone from HP monitor this forum and can they test this out and report the flaw to the design team, or suggest a work-around to me?
Thanks!

Paul,
I noticed that when the cover is completely open (90 degrees), there is a chime sound and the ADF symbol lights up in the upper right hand corner. If I lower the lid a bit, I can press the copy button and get the copy started before the symbol lights up. This is the same chime and symbol that lights up when pages are placed in the ADF.
I tried putting shims (small pads of post-its about 1/8" thick) under the bottom edge of the printer in the back. That is enough to prevent the sensor from engaging the ADF with the top opened fully. Yipee, hands free operation. HP would probably say I voided the warranty.
Maybe the printer was tested on a table that was not level.

HP Officejet Pro 8600 e-All-in-One Printer - N911a: Scan & Copy in color results in full cyan page

Product Name: HP Officejet Pro 8600 e-All-in-One Printer - N911a
OS: Windows 8.1 64 bit
I noticed the problem: After I scanned a medical card that was 80% cyan.
Problem: The problem persists when scanning/copying using the ADF or using the scanner glass bed.
Only occurs during color scanning or copying. I can print a file from my laptop or home pc with no issues, as long as the color file did NOT come from my printer.
If I had scanned the small O'Riley's note in black & white there would have been no streaking.
I have reset, used the HPP Dr., cleaned the glass, etc, & followed Solutions 1 - 3 http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02881567&lc=en&product=4323659&tmp...
I sincerely appreciate your assistance.
Rene'

Hi @Veritasabt,
I see that you are having issues scanning and copying in color from the glass and the ADF. Thank you for providing the screen shot. I can help you out today.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP Officejet Pro 8600 N911a Firmware.
Try scanning again to see if you have the same results.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to make a copy of a legal size document on HP Officejet Pro 8600

How to make a copy of a legal size doucment on HP Officejet Pro 8600 e-All-in-One?

Hi,
Please try
(a) Load legal size papers onto the input tray (you have to extent the tray from the blue/cyan part to fit legal size papers),
(b) Load original face up on the ADF,
(b) Touch copy,
(e) Touch Settings (now you can change size and few other options,
(f) Touch Black or Colors to copy.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Officejet Pro 8600 Plus On-Glass Copy Problem

When I try to copy on-glass, the scanner bar does not move to the far right edge so it cuts off about 3 inches of the top of the document being copied. Scanning from document feed and sending items to be printed work fine.
This question was solved.
View Solution.

Hi @MKortan , and welcome to the HP Forums!
I understand you're having copy issues. I would like to try and help!
What paper size are you using?
I'd recommend performing a a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
Also, try plugging the printer power into a different wall outlet.
I'd then suggest updating the printer firmware:
Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Single Vertical Line When Using ADF for Scan or Copy on HP Officejet Pro 8600

HP Officejet Pro 8600 Premium Printer (CN577A)
OS: MS 7 64 bit
When using the ADF for my CN577A HP Officejet Pro 8600 Premium printer, I get a single vertical line on the document that is produced. This occurs when copying or scanning, both in black and white, and in color. If I scan or copy using the glass, I don't get the vertical line.
I already tried the troubleshooting. I unplugged the printer, left it without power for several minutes; that didn't correct the problem. Next, I cleaned the rollers and the glass; I still get the vertical line, but only when using the ADF.
My firmware version used is current (CLP1CN1150CR).
What should I check next?
This question was solved.
View Solution.

The ADF uses its own glass area on the scanner bed, it is the narrow (about 1" wide) strip on the left. Cleaning this area should resolve the issue. A single small spot would cause the issue you are seeing.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet Pro 8600 Plus copy prints with black streaks

I just bought an HP Officejet Pro 8600 Plus and it seems to work great at printing; however, when I tried to copy something, the copy came out with black streaks that nearly render the print illegible and are the most dark/condensed towards the left hand side of page.
How do I fix this problem?
This question was solved.
View Solution.

Hi,
It could be due to the scan calibration issue during power on.
Power off the Printer, make sure scan lid closed properly. Now power it on, it will do scan calibration.
Now try to do the copy and see the results.
Hope it will help you.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

HP Officejet Pro 8600 N911a - Print when Fax is Not Saved

Can I make it so a fax is printed when it's not saved? I know I can set it to print and save every time, but I rely on HP Digital Fax to save paper. If a fax is not saved, either due to a network error or if the computer that it usually saves to is shut off, can the fax just be printed?

, it's nice to meet you. I think I found something that may help with your faxing dilemma. This information was in the User Guide for the Officejet Pro 8600 e-All-in-One Printer - N911a; pg 69. Set up backup fax Depending on your preference and security requirements, you can set up the printer to store all the faxes it receives, only the faxes it receives while the printer is in an error condition, or none of the faxes it receives. The following backup fax modes are available:On > The default setting. When Backup fax is On, the printer stores all received faxes in memory. This enables you to reprint up to eight of the most recently printed faxes if they are still saved in memory. NOTE: When printer memory is low, it overwrites the oldest, printed faxes as it receives new faxes. If the memory becomes full of unprinted faxes, the printer stops answering incoming fax calls. NOTE: If you receive a fax that is too large, such as a very detailed color photo, it might not be stored in memory due to memory limitations.
On Error Only > Causes the printer to store faxes in memory only if an error condition exists that prevents the printer from printing the faxes (for example, if the printer runs out of paper). The printer continues to store incoming faxes as long as there is memory available. (If the memory becomes full, the printer stops answering incoming fax calls.) When the error condition is resolved, the faxes stored in memory print automatically, and then they are deleted from memory.
Off > Faxes are never stored in memory. For example, you might want to turn off Backup fax for security purposes. If an error condition occurs that prevents the printer from printing (for example, the printer runs out of paper), the printer stops answering incoming fax calls. NOTE: If backup fax is enabled and you turn the printer off, all faxes stored in memory are deleted, including any unprinted faxes that you might have received while the printer was in an error condition. You must contact the senders to ask them to resend any unprinted faxes. For a list of the faxes you have received, print the Fax Log. The Fax Log is not deleted when the printer is turned off. To set backup fax from the printer control panel 1. Touch (right arrow), and then select Setup.2. Touch Fax Setup, and then select Advanced Fax Setup.3. Touch Backup Fax Reception.4. Touch On, On Error Only, or Off. Reprint received faxes from memoryIf you set the Backup fax mode to On, the received faxes are stored in memory, whether the printer has an error condition or not. NOTE: After the memory becomes full, the oldest, printed faxes are overwritten as new faxes are received. If all the stored faxes are unprinted, the printer does not receive any fax calls until you print or delete the faxes from memory. You might also want to delete the faxes in memory for security or privacy purposes. Depending on the sizes of the faxes in memory, you can reprint up to eight of the most recently printed faxes, if they are still in memory. For example, you might need to reprint your faxes if you lost the copy of your last printout. To reprint faxes in memory from the printer control panel 1. Make sure you have paper loaded in the main tray.2. Touch (right arrow), and then select Setup.3. Touch Tools or Fax Tools, and then select Reprint Faxes in Memory. The faxes are printed in the reverse order from which they were received with the most recently received fax printed first, and so on.4. If you want to stop reprinting the faxes in memory, touch the Cancel button. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Officejet Pro 8600 Plus

Hello.
I have the Officejet Pro 8600 Plus running on Windows 7. The printer is connected to computer by network and it is linked to the computer.
All was well with the printer untill I removed Norton and installed McAfee two days ago. Now it will not work, even with McAfee turned off.
I tried to uninstall and re install the printers programmes and driver, but it will not re install the programme or driver.
I have uninstalled all HP prog's.
Stopped all start up prog's except the Microsoft ones.
Turned off McAfee
Gone to HP and re installed the software and drivers.
These downloaded fine (took a few minutes and 123.00 MB copied) and installed.
Accepted HP licence terms and ran printer installation programme.
Got instalation complete message.
But it is not installing! Where is it downloading the programme and driver to?
Downloaded the HP Print and Scan Doctor. This finds printer and says programmes not installed. it then downloads them, but it never works. Even with McAfee firewall and scanning all turned off. If I then run it again, I get the same mesasage the programmes not installed, though it just seemed to do it....
If I go to devices / printers there is no Officejet Pro icon like there was. If I try install new printer there, I does not find the correct drivers for this HP model.
If I go to Start, all Programmes, HP and click on these icons I get message "Shortcut moved or changed"
I am at whits end with this now. Absolutly hate the McAfee.
Please help. Nick
PS.
I have got the printer partly working by using the windows available driver HP Officejet Pro K8600 Series, but this is not the correct driver. It will not scan and has very limited printing functionality.
Windows also shows a FAX - HP Officejet Pro 8600 driver, but this did not work when I tried it. Is this the proper driver for this printer??
When I try to get windows to download new drivers it goes looking but says it is unavailable and to try again later. :-(

Hey there @Nick-S!
Thank you for posting on the HP Forums!
I can see that you are experiencing some software issues with the Officejet Pro 8600 after re-installing McAfee. I would be happy to provide some suggestions that may help resolve the issue!
I suggest restoring the network defaults in the printer, power cycling the router and reconfiguring the printer on the wireless network. To restore the network defaults press the Wi-Fi icon on the printer and go into settings. Under settings should be an option to restore the network defaults. Once the network defaults in the printer have been restored power cycle the printer and power cycle the router for 20 seconds. When the printer turns back on press the Wi-Fi icon again, go back into settings and run the wireless setup wizard.
I understand you have re-installed the software but the printer is still not recognised. I recommend uninstalling the HP software one more time. After the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
To uninstall HP software click here: Uninstalling HP Software
To perform a disk cleanup click here: Performing a Disk Cleanup
To download the HP software click here: HP Officejet 8600 Plus Software and Driver
Please post back and let me know how that goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Scan To network folder - HP officejet pro 8600 cannot connect.

Good morning,
For the last week or so, My officejet pro 8600 has been giving me the error
"Cannot connect to \\REDACTED\Public\Scans. Make sure the remote computer is turned on."
It will correct itself if we restart the computer/printer in question. but this only solves the issue for approx 6-7 hours.
Things i have done to attempt to fix this.
Set a static ip address for both the computer in question and the printer itself.
updated the IP address using the HP tool.
reinstalled the HP office program.
Set DMZ for both the computer and printer.
Set the public scans folder to zero security( so anyone connected to the network can gain unrestricted access)
re-setup the network feature on the printer itself.
however now i am at a loss.
Any help would be great.

Hi @Prophet1986,
Welcome to the HP Forums!
I understand that you cannot connect in order to scan to your network folder with your HP Officejet 8600. I am sorry to hear this, but I am happy to help!
Are you able to make copies? Setting Up the Printer to Print and Copy from Tray 1 and Tray 2.
Are you connected wirelessly? Or with an Ethernet cable?
Also, what operating system are you using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
In the meantime, please try the following:
Make sure the printer's power cable is plugged directly into the wall outlet, not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Firmware update. Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
In the meantime, if you are using Windows, please see this guide, HP Scan to Network Folder or Digital Fax to Network Folder Fails to Install or Function in Windows w....
Printer Does Not Maintain Wireless Connection. (This guide will help you maintain the connection, if you are wireless).
Hope this information is helpful, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

New (bought last year) Officejet Pro 8600 Plus and I can't get the ADF working.

9 month old Officejet Pro 8600 [CC78E4]
Product Number: CM750A-64001
Serial Number: CN1CD1K1CV
ADF used rarely and on the occasions I have tried it it always gives me this problem - even for a copy as opposed to a scan
ADF not working on 5 page document
Tried using 1 page
always get "Reload original in the automatic document feeder (ADF) and try again@
either from the front panel or from the HP scan utility on my PC.
I have been through the process recommended on your support pages for resetting the printer (remove power cord)
Please HP experts come to the rescue!

Hi - You can find the different UK numbers at this location:
http://www8.hp.com/uk/en/contact-hp/phone-assist.html
The good news, as you mentioned is if it is less than a year old, it will be taken care of under warranty at no charge to you.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

HP OfficeJet Pro 8600 - will print wirelessly but not scan on Windows 8.1. HP PC

Hello,
my HP printer and HP computer have been working perfectly but now all of a sudden I cannot scan anymore from my printer to my computer. I can print and scan the other way around and the wireless network works. I am just a regular user and don't feel sure about how to uninstall and re-install programs, so I would be very happy if you had just a simple fix
I already tried closing down everything and unplugging the router, then plugging the router and turning everything on again but it didn't help.

Hi @gabmus,
Welcome to the HP Forums!
I see that you can print but not scan wirelessly with your HP Officejet pro 8600 on Windows 8.1. I am happy to help you with your scanning issue!
To verify the printer's hardware is working, are you able to make copies with the printer? Copying a Multipage Original.
In the meantime, please go through the steps in this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays When Scanning for HP Officejet....
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Officejet pro 8600 copy cancelled

Similar Messages

Maybe you are looking for