OfficeJet pro 8600 not printing for USB attached WIn7

I have an OfficeJet Pro 8600 Attached  to Win 7 Dell with USB cable.  It scans very well but most of the time when you go to print, it thinks the USB device has timed out and it gives me garbage about where to send a fax to?   
I have other computers runing XP that are Wireless devices, and they take longer but print every time something is sent to them.
This connection is 3' away and the printer default & only printer for Win 7 machine.  Under printers and devices it always  sees the printer.

Try to run the Print and scan doctor and check the results. 
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c03275041
Also, see if you can get another USB cable. Let me know the results. 
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

  • Officejet pro 8600 not printing. lost in print que

    Out of the blue printer begins loosing print jobs. Have reset printer like HP instructs, and I have turned off both iMac and printer and restarted them. There is nothing to print. The que goes empty - before and after a reset, the print job shows to be printing, but nothing happens, then the print que blanks out.
    It is a bonjour or airprinter. No usb hooked up. The utilities will make it print, but nothing else from the apps will print. A newsletter deadline is staring me in the face. What a time for this to happen.
    I had a problem about a month ago and installed the firmware from HP and the latest drivers from HP. All went excellent. About a week later Apple downloads and installs a new(er) driver and all worked fine for about a week and then the print que began to slow. Now it has stopped. Need some help here.

    Hello, might try this...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • My HP Officejet Pro 8600 Plus printer will not recognize my wireless router passwrd

    My printer was working fine but when I turned it on today it wouldn't connect to my wireless router. I try inputing the correct password and the printer gives me this message......"the WPA security passphrase configured on your HP printer does not match your wireless router setting" .
    I have entered the password several times and I know what I have entered is correct

    Hi @Southglen,
    Welcome to the HP Forums!
    I noticed that your HP Officejet Pro 8600 Plus printer will not recognize your wireless router password. I am sorry to hear this, but happy to help!
    I would recommend to go through this guide, How to Find the WEP or WPA Key or Password for Your Wireless Network, just to double-check your wireless password, in case it might have changed.
    I would also suggest a hard reset, by going to this post How to perform a Hard Reset, by @Rich1.
    After those two steps, I would suggest a firmware update, Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
    Let's start with these steps, and we will go from there!     
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Officejet Pro 8600 Plus prints part of page and quits

    My brahd-new Officejet Pro 8600 Plus prints part of page and quits.  The manual said to clean the print heads and align the printer.  I did both of those.  It made the problem worse.   I'm printing on photo paper - HP Premium Plus.  It happens about 1/2 the time. 

    Hi beantowner2,
    I would like to begin with a few questions,
    Does this happen when you copy a photo, or only when you print form the computer?
    Do you have the printer connected directly to a wall outlet or a surge protector?
    What operating system and version is on the computer?
    Is the printer connected to the computer with a USB cable or wirelessly?
    If you have a WIndows operating system please download and install the latest firmware version for the printer. HP Officejet Pro 8600 N911g_n Firmware.
    If you are using a surge protector, I suggest disconnecting and connecting the power directly to a wall outlet.
    Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see,
    ISSUE:
    Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    This is not limited to Laserjet printers.
    I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My HP officejet pro 8600 will print but won't scan wirelessly

    My officejet pro 8600 will print and scan with a usb connection. It will also PRINT when connected wirelessly but it doesn't  SCAN wirelessly. Running OS X Yosimit 10.10.2. thanks  John

    Thanks John!
    I'm still curious as well, do you get that same error regardless of initiating the scan from the printer or the software?
    At this point, I will suggest that you try resetting your printing system (don't re-add the printer just yet) and then perform a verify/repair of your disk permissions. Once those complete, restart your Mac and then add the printer back to the queue.
    Try scanning again via the HP software and then the Apple software. Please also ensure you try initiating the scan both from the printer as well as the software and let me know if there is any difference, thanks
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Officejet Pro 8600 plus Printer

    I have just purchased the Officejet Pro 8600 plus Printer & installed it with no problems but it won't connect to the internet/web services? It is connected to my home network & will print etc. but when I try to activate the internet as directed, it searches for a while with 'Enabling Web Services (ePrint & Apps)' on the screen & then reads 'Web Services (ePrint & Apps) could not be enabled'. 
    When I tried to activate the web service during instalation, the page read that if it did not activate I would be directed to a page to download necessary drivers but this never happened & the only thing I could do was to select the 'Next' button which completed the installion without the internet/web service working.
    Does anyone know of this issue & if so, can you please tell me how to connect my printer to the internet. 
    This question was solved.
    View Solution.

    That is great to hear Roses66. If you could mark my previous post with the 'Accept As Solution" it will help others in this community to find our conversation easier.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP Officejet Pro 8500A not printing from black cartridge

    This happened in an instant-no warning. I have tried all known troubleshooting and have disconnected.  The cartridge is one month old - no error messages.

    Hello there! Welcome to the forums @Mickgogs ,
    I would recommend scrolling up to my last message about the black ink not printing. I have posted a troubleshooting guide to help resolve the issue. If the steps don't help, call HP directly to see what your options are.
    Re: HP Officejet Pro 8500A not printing from black cartridge
    HP's contact info:
    If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
    Have a great weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet pro 8500a not printing black

    HP Officejet pro 8500a not printing black, we put new cartridges in two times, we replaced the printer head. If I change the document to a blue color, it will print that. 

    Hi Martymartin,
    Welcome to the HP Support forums.  I gather that your Officejet Pro 8500a will not print black ink but will print blue ink.
    I have included a document with trouble shooting steps to take to help resolve this issue.  If the steps in your document don't resolve the issue please call our technical support at 1-800-474-6836 if you live in the USA/Canada region. If you live outside the USA/Canada region please click the link below to find the Technical Support number for your country/region.
    Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
    Hewlett Packard Technical Support
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • My HP Officejet pro 8600 plus printer is locked

    My HP Officejet pro 8600 plus printer is locked and is offline how do I unlock it because I'm in big trouble.

    I had the same problem, HP kept telling me it was my wireless network. But I had paddle locks on my wireless on the printer it self. We finally figured it out.  I will try to explain as best that I can. If your looking at the printer, down to the left of the window, press several times just outside the printer window, until it wakes up.  Scoll with arrow keys > to the right until you come to the Enable /unenable the wireless. Press up/down arrows to come to the Enable window and reset it from there.  I hope I explained this wwell enough to do it on your own. Just to let you know when you are pushing to the left of the window quickly to get it started, you are not pushing any visable button, just keep pushing and will open up in the window.  Good Luck

  • Will my hp officejet pro 8600 plus print from my ipad.

    will my hp officejet pro 8600 plus print from my ipad.?
    This question was solved.
    View Solution.

    Hello,
    Yes.  Try following the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    If that does not help, let me know and I will see what I can do.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Can I activate ePrint on my HP Officejet Pro 8500 Premium printer for use with my smartphone​?

    Can I activate ePrint on my HP Officejet Pro 8500 Premium printer for use with my smartphone? Any instructions?

    Yes.  You can do that
    Just follow the instructions for the appropriate device on this HP web document. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How do I reset to default or change static IP address on HP Officejet Pro 8600 Premium printer?

    How do I reset setting to default or change static IP address on HP Officejet Pro 8600 Premium printer?

    Hi,Tap the right arrow and then tap the Setup icon.Tap the Network option and select Restore Network Defaults.Confirm any prompt to restore the default network settings, it will remove any manual IP configuration. If you are wirelessly connected to the network, select Wireless Setup Wizard and select your network to reconnect the printer wirelessly. Regards,Shlomi

  • Officejet Pro 8600 not able to be set as default printer

    I've just installed the Officejet Pro 8600 on my wireless network.  It was added correctly using WPS andindicated no problems found on the wireless network test results that the printer did. All items were listed as 'PASS'. It is showing up in the device and printers on my Windows7  64-bit machine. When I right-click on the printer icon, it does not allow me any option to set it as my default printer and it also doesn't show up as an available printer from any application to print (like from MS Office). The device driver was auto-located by Windows, so there is also no option for me to update it. Anyone have a solution for what I need to do to get the printer available to actually print too?? Thanks.

    Hi,
    I had a smiliar problem for the same printer that I bought just yesterday.
    Despite numerous troubleshooting tasks, I was still unable to make the printer my default one.
    I tried
    - switching from wireless to USB connected
    - uninstalling and reinstalling
    - cleaning registry entires as directed here:
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup-e-g-Windows-8/Cannot-Set-HP-Officejet-...
    - running troubleshooting wizards and more...
    So... after yet another re-installation, I went here:
    https://h30495.www3.hp.com/help/about
    and clicked on Printer Support under Additional Help (down at the bottom)
    - choose North America
    - choose HP Support - United States (English) --> Product Support and Troubleshooting -
    - now - here - IMPORTANT - http://www8.hp.com/us/en/support-drivers.html :
    DO NOT  Enter a product name/number
    - but choose
    Or automatically find your products and solutions - click on START button
     you may need to ALLOW your antivirus software to scan your computer and after a minute or so you will get a response like this:
    1 HP products were discovered
    »HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g                 Serial Number:                                 Product #  here                                               Product Number:                                 Number here                               
    Now got to Start - Devices and Printers and RIGHT CLICK on the HP printer device and choose Printer Properties:
    The GENERIC NAME  "HP Officejet Pro 8600" needs to be replaced with FULL NAME of your printer:
    HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
    Click "Apply"  - click OK
    Now make your printer DEFAULT
    GOOD LUCK!

  • HP OfficeJet Pro 8600 - will print wirelessly but not scan on Windows 8.1. HP PC

    Hello,
    my HP printer and HP computer have been working perfectly but now all of a sudden I cannot scan anymore from my printer to my computer. I can print and scan the other way around and the wireless network works. I am just a regular user and don't feel sure about how to uninstall and re-install programs, so I would be very happy if you had just a simple fix
    I already tried closing down everything and unplugging the router, then plugging the router and turning everything on again but it didn't help.

    Hi @gabmus,
    Welcome to the HP Forums!
    I see that you can print but not scan wirelessly with your HP Officejet pro 8600 on Windows 8.1. I am happy to help you with your scanning issue!
    To verify the printer's hardware is working, are you able to make copies with the printer? Copying a Multipage Original.
    In the meantime, please go through the steps in this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays When Scanning for HP Officejet....
    Hope this helps, and have a great day!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

    An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
    Windows Server machine (there's a reason for this, so please understand that ;)  ).
    We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft.  Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
    came with Windows 2012 seem to work very well.
    PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services.  After doing all of that, the HP printer will not print anything.  It's like all print
    requests directly from the Windows Server go to Nil.
    Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles.  I even tried installing the
    HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints.  Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
    Client PC's can print to it directly.
    Does anyone have any suggestions we could try?  Thanks in advance.

    While it is quite a while since this was posted - I can concur a similar issue exists.
    We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil.  The print server is hosted on a shared DC.  Comparing to the initial posters details, for some reason
    it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
    I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix.  Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
    all of those failed then tried a stand alone server os machine as a last resort which worked fine.  Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

Maybe you are looking for