Officejet Pro 8600 Plus, N911g sends faxes, but won't receive

Hello,
My printer will send faxes, but not receive them.
Windows 7 Pro 64 bit, SP1. The printer is connected to the computer via wireless. The phone is Comcast Digital Voice. The printer is the only device connected to the phone line. Per techs at Comcast, the phone line is functional.
I ran a Fax Test via the printer, and all items read "PASS".
I completed all the steps in the following link, "Cannot Send or Receive Faxes" found on the support forums, EXCEPT resetting the printer by unplugging the power cord while the printer is on.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02891758&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
As per the instructions, I sent a fax to the HP Fax Test Service. The outgoing fax appeared to connect properly and send, as I heard the dial tone and connection sounds, and I received a fax confirmation, result "OK", from the printer. However, the return fax never arrived.
I also confirmed that the number set in the fax header in the Basic Fax Setup, is indeed my phone line number.
Any assistance would be greatly appreciated!
Thank you,
Jason

Hey Jason,
I have ran into this situation quite a few times in my experiences with fax issues, it very well could be the digital line itself. My last suggestions for you would be to try a power reset on the printer, and also try a filter on the fax line to see if that could help the line. If you are still having issues with sending faxes, give us a call to our technical support to see if there are any more options for you.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Here is an example of a filter:
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Configuring "Scan To E-mail" on HP Officejet Pro 8600 Plus N911g

This is the same issue reported by several other users in this forum to which no solution has been provided.
I have been unsuccessful in setting up the scan to e-mail option for a HP Officejet Pro 8600 Plus N911g purchased on August 12th 2012 and using the firmware CLP1CN1150CR.
I am trying to do this through the Embedded Web Server interface to the printer from an iMac running Mac OS X 10.6.8 and HP Utility 5.8.0. More specifically the page under "Scan -> Scan to E-mail -> Outgoing E-mail Profiles".
I have tried 2 different SMTP outgoing servers, each of which works well to send e-mail from the computer: Apple iCloud e-mail service (formerly known as Mobile Me, formerly known as .Mac) and AT&T Net e-mail service. I verified that the server name, port number and authentication login/password values were all correct.
When scan to e-mail is used from the printer, I get an error message: Cannot connect to server. Check server name and address.
When tested from the computer during the setup of an outgoing e-mail profile, I get an error message: The device could not send the test e-mail message. (EmailAccounts-timeout).
When I try to configure the page under "Settings -> E-mail Alerts -> E-mail Server" and use exactly the same values as the ones in the outgoing e-mail profile above, the Save and Test option fails with an error message: The device could not send the test e-mail message.
Interestingly enough, I am able to use the computer's e-mail client with the option Scan To Computer -> E-mail as PDF or E-mail as JPEG. With this option, the file is scanned and added as an attachment to a mail message from the Mail client under Mac OS X. When I press the Send button, the e-mail is sent successfully through the same SMTP server.
All the error messages seem to indicate that the printer's e-mail client software is unable to establish a connection to the SMTP server. However, it is not clear what configuration parameter is the one that could be causing the problem.
This question was solved.
View Solution.

After further research, I noticed that there are other possible default Simple Mail Transfer Protocol (SMTP) port values:
Port 25 is the standard SMTP port number.
Port 465 is the port number for SMTP over SSL, Secure SMTP (SSMTP).
Port 587 is the dedicated port number for a Mail Submission Agent (MSA) that uses a variant of the SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the mail submission service.
I had been using port number 25 as this is the standard one. However, all tests were failing. Hence, I decided to try the tests with ports numbers 465 and 587.
Port number 465 failed with the same errors listed above. However, the tests passed with port number 587. After saving the successful configuration with port number 587, I tried the scan to e-mail option from the printer and it worked.
A mail submission agent (MSA) is a computer program or software agent that receives electronic mail messages from a mail user agent (MUA) and cooperates with a mail transfer agent (MTA) for delivery of the mail.
Historically in Internet mail, both MTA and MSA functions use port number 25. However, many Internet Service Providers (ISPs) and enterprise or institutional networks restrict the ability to connect to remote MTAs on port 25.
With a dedicated port 587, it is always possible for users to connect to their domain to submit new mail. Availability of a MSA on port 587 enables nomadic users to continue to send mail via their preferred submission servers even from within others' networks. Using a specific submission server is a requirement when sender policies or signing practices are enforced.
I know that many users may find the technical details boring or confusing, but I just wanted to include some background to those who actually care about this level of detail. I also wanted to provide a possible solution to other users who are experiencing the same problem.
So, in a nutshell, if the Scan To E-mail option is not working for you using port number 25, then try one of the other SMTP port numbers listed above. If none of them work, check your mail provider for other possible outgoing server port numbers.

Officejet Pro 8600 Plus N911g - scanning stalls part way through

I have a HP Officejet Pro 8600 Plus N911g. When I try to scan a large number of documents from the printer to my computer, the printer stalls part way through. Today I had a stack of 45 pages that needed to be scanned. I loaded them into the document feeder on the top of the printer, hit "Scan", "To Computer", chose my computer from the list, "Save as pdf" and start scan.
The printer started scanning, got through about 30 pages and then just froze up. The display screen showed "Now Scanning". I let it sit for over a half an hour, but it did not resume. The only way to get out of the stalled scanning was to turn off the printer and restart it.
This has happened multiple times. Is there a limit on the number of documents that can be scanned at a time?

Hello aksnell,
Welcome to the HP Support Forums!
In my experience the Officejet Pro 8600 Plus would be best suited to scan such a large amount using the software provided. The printer has a internal memory of 128 MB, that will fill up very fast when scanning into the computer.
I would recommend opening HP Scan on the computer, select .PDF and scan the pages this way. It will still feed from the Automatic Document Feeder and also save all pages to a single file when done.
If you need a hand scanning using the software, replay back with the Operating System installed on your computer, Windows or Mac.
Thanks for posting.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Officejet Pro 8600 Plus N911g Devices and Printers Page Is Slow to Open

Hello, I have HP Officejet Pro 8600 Plus, model N911g, installed as a wireless printer. I have Windows 7 64-bit. My Devices and Printers page takes over two minutes to open. While I am waiting, if I go to Print Spooler Services and click Restart, the page opens right away. Once the page is open, in the HP Officejet Pro 8600 Plus device, I ran Troubleshooter and it took about 1/2 hour to finish, and it reported and supposedly fixed a problem in the Print Spooler service. The assigned Port looks like a recovered port. However, if I restart the PC and try to open Devices and Printers again, the delay is still present. I had trouble installing the HP program including the Scan to PC functionality, because response time was so slow. Now it's installed and working, but the HP program is quite slow to open. The spinning circle spins and then stops, almost like it has given up opening the program. Then several minutes later the program opens or the requested action begins.

Check the document I linked below. Step 6 might be the solution you are looking for but it will not hurt to start from the top.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

HP officejet pro 8600 plus need to reset, but no screen access due to head error

hi,
I had some HP's 8600 but one of them it is dead as printer and it was replaced.
I need to use it only as scanner (no printing since its problem are the printing heads). The problem I cannot access to the menu through the screen since it is stock with the message mentioning the fail on printing head. The next option it is to watch a demo about heads.
Im trying to access in order to fix a new static ip for the scan.
Is there a way to reset so the printing gets an dhcp ip add? So far the scanner works fine through USB connection.
Thanks in advance

Hello @Rodrigo_cl,
Welcome to the HP Support Forums!
I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer has encountered a hardware Printhead failure and is not allowing you to scan using a static IP because of this. I would like to assist you today with resolving this issue.
Now, due to the error on the front panel of the printer, you will not be able to perform any resets on your machine. But, if your printer is currently on the network with an automatic IP we can utilize the embedded web server to configure a static IP.
Is your printer currently on your wireless or wired network?
Once I know if your printer is currently on the network, I can guide you towards configuring the static IP through the computer. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scanning issues. I would like to help.
I would recommend powering off your printer and computer. Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in. Once it has begun broadcasting again, power on your printer and computer.
I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

Hi All,
I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is
100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

Not a reply but another plea for help.
There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
-Printer bought about 2~3 weeks into Sept 2012
-Installed onto Macbook Pro running Lion (full updated at that time)
-Both wireless scanning from printer to computer and initiated from computer worked fine.
-Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
-Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
-Somewhere along the line it stopped communicating with my MBP
-Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
-Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
-Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
-Reinstalled HP software from disc.
Still didn't work.
-Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
8600 doesn't list my MBP as available computer to scan to
[But all the test pages done whilst in HP Utility, and others, get sent through]
Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
Hrumph
Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
Thanks,
Mike W

Hp officejet pro 8600 all in one prints but won't scan

I have recently moved house and changed my wireless router from BT to Virgin.
I am running OS X 10.9.5
I am able to print from my mac without issue, however, it has stopped scanning. I have managed to get it to work twice on isolated instances but it won't work consistently.
I have unistalled the software and reinstalled via the HP download page but when I open HP Scan and click scan it asks me to choose which scanner - mine is selected, it then says preparing to scan and it does that for ages until it says it can't get a connection.
My printe r is a HP Officejet Pro 8600 All-in-one N911g - I am not bothered that much about scanning from the printer to the computer (I have tried to enable this option and it won't let me) I just want to be able to open HP Scan and press scan and it scan on my computer.
Any advice appreciated - thank you

Hi there @Steph390 , welcome to the forums!
I have some suggestions for you to hopefully correct the scanning issue you are having. Please feel free to reply back and let me know the results!
1. Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
2. Mac OS X: How to reset the printing system
3. Repair disk permissions
4. Restart your computer.
5. Re-add the printer
Once the printer is connected on the network, follow these steps to maintain the wireless connection, normally a static IP will help out quite a bit: Printer Does Not Maintain Wireless Connection
Good luck to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

OfficeJet Pro 8600 Plus connected to network but cant print

My OJ Pro 8600 was previously configured and working properly, but has stopped. I was able to print off of 3 computers and a phone. All have the same IP directed toward the printer and the printer has the IP as well. I have reset the network, reset the printers network settings and the set them back up, ensured the computers have the correct ip address for the printer as well. I have tried to print the from the computers with no luck. The printer does pull a proper IP .120 in a .0 network with default gateway matching all the computers which is pingable. Printer doesn't show in the arp table either.
The computers can't find the printer, neither can the phone and the same from printer to computer when attempting to scan to the computer. I have checked the WIA on all computers, restarted the service also.
Also tried manually setting the IP on the printer and still no luck. My wireless range hasn't changed as I'm still within signal distance from the router with a strong signal.
Tried Print and scan Doctor - no luck
I'm at a total loss minus hooking a computer directly up to the printer at this point.
I keep thinking 'PC load letter' and laugh as this must be something small i'm overlooking..
HELP?
Problem solved - full reset on router and network settings on printer.

@n1cholas
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

OfficeJet Pro 8600 Plus - N911g - refuses to print with an exhausted cartridge (yellow)

Hi,
I owned this printer some months ago, and I have already substituted the black cartridge some times ago.
In fact, I usually use the b&w option to print my documents, and I use very little to no colors, instead.
Before deciding to buy this printer I had read the printer guide, which reports (translated from Italian):
[Printing with one or more cartridges exhausted]
The printer can work with one or more cartridges exhausted. However, printing with exhausted cartridges slows the printing process down and lowers the quality of the documents printed. If the black cartridge is exhausted, blacks are not going to be really dark. If a color cartridge is exhausted, the result is in the grey scale. As soon as possible, replace the exhausted cartridge. Don't remove the exhausted cartridge before you can replace it with a new one. [...]
(screenshot attached)
The downloadable user-guide reports (no translation):
[Color cartridge very low on ink]
To temporarily print using black ink only, click Cancel Print and then re-send the print job. The
Use black ink only? message appears before the job prints. The empty cartridges will need to be
replaced soon.
(screenshot attached)
So, when I decided to go for this printer, knowing I substantially use black only for my studies and my work, I did take care of reading the entire printer guide and look for these specific official declarations by HP on the printer functionalities.
Additionally, I took care of disabling any HP protection and pages control on the cartridges before installing them, using the printer menu.
Today, instead, I've found out the printer won't print with an exhausted yellow cartridge. This is what the message window says (translated freely, again, from Italian):
[Exhausted cartridge]
HP 951 SETUP Yellow
Replace the cartridges in the list to be able to print.
HP advises not to remove the cartridge until you have a replacement one ready for installation.
Buttons are: [Buy online...] [Cancel printing] [?]
(screenshot attached)
[?] leds to the words I've reported earlier.
I still have the "print just with the black cartridge" option enabled.
I tried cancelling the print and sending the print job again multiple times, as it is described in the guide, but no "Use black ink only?" message appears.
Before invoking and thinking to the "fraud", I ask, how am I going to be able to print, then?

The manual indicates the printer can temporarily use black only once a color cartridge is low. Once the cartridge is depleted it will need to be replaced, otherwise damage to the printed may occur.
HP and other printer manufacturers have different printer technologies for different needs.
Some have printheads built into the ink cartridges. These printers can typically print with one or more of the colors completely empty, or even with color or black (but not both) cartridges removed. The Deskjet 6980 series is an example.
Other printers have separate ink supplies and replaceable printheads. An example would be the Officejet 8600. The printhead in these printers can be replaced if they are damaged by running the printhead with colors out. Some of these printers will allow printing with a color out, other will not. If the printer is run without ink in one or more colors the printer may be damaged, but the user may be able to recover without having to send the printer for service.
Other printers have permanent printheads. To run these without some ink in all the colors would risk causing damage to the printhead due to clogs, air ingested in the printheadvor burned out printhead firing resistors. The Photosmart 3310 series is an example of this type of printer. For printers with fixed printheads this could require service to get the printer to print properly again when the ink is finally replaced.
The document here describes how ink is used. While the document is written for HP Inkjet printers the same principles apply to inkjet printers from other manufacturers.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet Pro 8600 Plus (All-in-One) - Incoming Fax but mistakenly answer phone

I have landline phone service. On this line, I have multiple phones, an answering machine, internet service via wireless Uverse setup, and the HP Officejet Pro 8600 Plus as a fax. It's also a printer/scanner - but that uses the wireless Uverse service.
The unit works as a phone, if I answer in fewer than 4 rings. The answer machine picks up after 4 rings. If a fax, the fax connects after 6 rings. (Auto answer function is turned on.) This works.
If I mistakenly answer a fax call with the phone that the HP 8600 is connected through, I can press: 1,2,3 and the fax will answer. This works.
Problem: If I mistakenly answer a fax call from one of the other phones in the house (same phone line is ringing as before - but the phone is NOT the one through which the HP 8600 is connected) - 1,2,3, does NOT work. If I rush to the HP 8600: pressing the "fax" button on the unit does not connect the fax call; nor does the HP 8600 give me the option to "Accept" the call, when the phone as been answered.
Does anyone know what buttons to push to get the fax to connect when the phone line is answered at a phone? Either at the answered phone OR if I can get to the HP 8600 when I hear the fax tone - buttons I can push on the HP 8600 to get it to respond to the fax tones coming in on the line?
Thanks to anyone who can help.

Hello Vandy73,
I see that this is your first visit with us here on the HP Forums. Let me please take a moment to say "Welcome".
I hope you enjoy your experience!
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you have some concerns when it comes to answering a fax call by accident from another phone. Pressing the 1.2.3 on the fax is the proper way to remedy the issue when you answer from the fax, however this feature will not work from another phone.
I do realize that this is an inconvenience. The only resolution would be to contact the sender of the fax and have them resend.
Thank you for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Missing HP Utility (Officejet Pro 8600 Plus); need to reinstall - cannot uninstall printer software

I had to wipe my iMac and resinstall IOS Mavericks (10.9.5). Printer (Officejet Pro 8600 Plus, 9N11g) is working, but will no longer scan (double-clicking icon results in "original item cannot be found") and the HP utility icon on dock is missing, replaced with a "?." I located directions to uninstall printer software so I can reinstall... but there is no longer any HP folder or "HP Uninstaller" on my Mac HD. Neither is there an HP folder within Library/Printers folders. Spotlight search shows no HP or Hewlett-Packard folders on my hard drive.
I have downloaded an "HPPPrinterDrivers3.0.dmg" and "HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg," one of which I'm hoping will contain updated software/drivers to reinstall the printer and hopefully the HP Utility so I can regain scanning function, but I cannot figure out how to remove the current printer software, and I do not know if those are the currect files to use. I understand just deleting the printer will not suffice.
Can anyone provide step-by-step instructions on how to remove the software as well as installation (since I am unclear if I have the correct dmg files)? Thank you.
This question was solved.
View Solution.

Hi,
First I would suggest repairing the disk permissions, then try reinstalling the HP Software.
Follow the steps below to repair the disk permissions:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
Once you are done, run the HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg file and follow the steps on screen, be sure to select the HP Scan option while installing to get full functionality of the software.
Please try the steps above and let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer

HP Officejet 8600 pro Plus N911g model # snprc-1101-01
I insert an SD card full of photos into the built in card reader - but have no option to send the photos to a file on my computer. Does this product only print but not send to a computer? I need to edit the photos before printing.

Hi @Rodney88,
Welcome to the HP Forums!
I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer, and I am happy to help!
According to your printer's user guide found at this website, HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g User guides, as well as this guide, Printing From a Memory Card or USB Flash Drive. This printer only supports printing from SD cards.
In order to transfer the files to your computer, you will need an SD Card reader for your computer.
Hope this clears things up for you, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Officejet Pro 8600 Plus will not send or receive fax

I have connected the fax machine to the phone outlet, the fax machine dials to another fax machine, the connection sounds like it is being made (the receiving fax machine sends out a noise signalling that it has received a phone call) and then the HP Officejet Pro 8600 Plus says that is is "Connecting" but no fax is sent. Nor can I receive a fax, even though the phone rings on the Officejet Pro 8600 Plus. The error code I get is Error 388 which is that a communication error occurred during fax transmission. However, this message occurs regardless of the fax number that I send to, and I had the recipient check that the receiving fax machine was working fine for transmittals from others.
Is it possible that the proble is that I cannot send or receive faxes through a digital phone line? That seems odd to me given that almost all phone lines in the modern era are digital. How do I send and receive faxes with the Officejet Pro 8600 Plus if the only phone lines available are digital? Also, 4 months ago, I used the same phone line for the same machine, and the fax function worked, but my phone provider assures me that the only phone lines that they have ever provided are digital.
Thank you.

Hello,
I am sorry to hear you are having issues with the fax functionality on your Officejet 8600 plus. I have found a document that has several troubleshooting steps you can try to narrow down the issue. I know some of these steps you have already done, but there might be a few that you haven't, like there is a HP test fax service you can use to test functionality.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02891758&cc=us&dlc=en&lc=en#N226
Good luck!
I work for HP, However, I am speaking for myself and not for HP

OfficeJet Pro 8600 Plus e All in One fax to e-mail help

I purchased this unit yesterday for my office and I would like to have incoming faxes get sent to my computer as an e-mail. I have gone through the digital fax setup process but I am not receiving e-mails notifying me of a fax. Here are some specifics:
HP OfficeJet Pro 8600 Plus e All-in-one printer
Dell Inspiron 570 with Windows 7 64 bit OS
System is on a network but not through a server. Does anyone know how to set up the OfficeJet so it will send me e-mail notification when a fax is received? Any help is appreciated.

Hi,
You may set Fax to Email feature from the printer EWS page:
On the product control panel, touch the Right Arrow ( ), and then touch Setup . The setup menu displays.
Touch the Down Arrow ( ), and then touch Reports .
Touch Network Configuration Page . The product prints a network configuration page.
Locate the printer IP Address / URL to access the EWS:
Type the printer IP Address on you browser to access the EWS page
Click the Fax tab
Click Fax to E-mail / Network Folder under the left column
Click Start Wizard and follow the steps to enable the feature.
Select Forward the Faxes to an e-mail address and proceed.
Follow the steps and provide your email account SMTP settings, similar to those used for Outlook
NOTE: You may contact your ISP to obtain the settings of your email server.
Click Save and Test to verify any of the settings is correct.
If you use a public email server (e.g. Gmail) and cannot find the needed settings, please let me know and i will try helping you to locate the server settings.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet Pro 8600 Plus, N911g sends faxes, but won't receive

Similar Messages

Maybe you are looking for