Officejet Pro 8600 Plus - wired w/static IP address, stops working & need to reboot the computer

This happened a few times before and I went through it with tech and the guy told me that this setting had to be changed because the static IP. The printer is setup for DHCP but the static IP is better however the printer looks to renew the DHCP and loses connection with the network. I run the HP Print and Scan Doctor and everything comes up OK. Once I reboot the computer everything works OK, after sitting idle for awhile the printer doesn't respond to print jobs. Both the printer and computer are wired to the same ethernet switch. Does anyone know the setting that needs to be changed in the printer configuration so this does not happen again.
Thanks,
We don't get much help from HP

Troubleshooting could be considered "jumping through hoops", it is process of elimination. We are at the diagnostic stage of our troubleshooting, thus I would like to determine functionality and ensure the printer works when connected directly to the router and not with the switch.
Please bear in mind, the Officejet 8600 is a consumer printer. Generally speaking, A.K.A - Networking 101, the printer should be connected either wirelessly to a router, or with an Ethernet cable, not to a switch or hub.
Let me know if we can eliminate the switch as a possible cause, by trying it without the switch.
Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer

HP Officejet 8600 pro Plus N911g model # snprc-1101-01
I insert an SD card full of photos into the built in card reader - but have no option to send the photos to a file on my computer. Does this product only print but not send to a computer? I need to edit the photos before printing.

Hi @Rodney88,
Welcome to the HP Forums!
I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer, and I am happy to help!
According to your printer's user guide found at this website, HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g User guides, as well as this guide, Printing From a Memory Card or USB Flash Drive. This printer only supports printing from SD cards.
In order to transfer the files to your computer, you will need an SD Card reader for your computer.
Hope this clears things up for you, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8600 Plus will not print the attached file in the e-mail

Dear support team,
I have installed the software and setup HP eprint according the manual respectively the advices in HP-Connected however if I send an e-mail to [edited by Moderator] the printer 8600 PRO PLUS will not print the attached file in this case a PDF. But the text inside the e-mail will printed.
Any recommends?
Thank you in Advance.
Best regards
Conny

Hi Conny,
Welcome to the HP Support forums. I understand that the attachment to an email sent to your Officejet Pro 8600 Plus printer’s ePrint email address did not print.
After the PDF didn’t print, did you log into your HP Connected account? I’m curious as to what HP Connected indicated about the print job. I have included the ePrint Job Did Not Print document. It has several causes and solutions as to why the PDF didn’t print.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

Hello: I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software. I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.
I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it. Any help is appreciated.
Thanks,
John

Hi,
It's an option during the installtion process. Please try the following Utility:
http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Editing contacts book on HP Officejet Pro 8600 Plus

I am trying to edit and/or delete my contacts book on the HP Officejet Pro 8600 Plus and am wirelessly connected to a network. I get the icon for the contacts book on the printer screen but I see no opportunity to delete or edit a particular contact. Help? Thanks.
lawbar

Ok,
Indeed I referred to the Fax Speed Dial list while you referred to the Scan to Email Contacts List.
That can be chnaged form the printer homepage (EWS) as following:
Open the HP Software by clicking the HP Officejet Pro 8600 icon and thne click on Printer Home Page (EWS)
Click the Scan tab.
Click on Email Address Book and confirm and approve any security alert.
From there you may manage the Address Book.
Note: You may also access it by clicking the network icon on the top of the printer front panel and locating the IP Address.
Browse to this IP from your Web Browser to access the page.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP officejet pro 8600 Plus shuts down on its own while making numerous copies.

My printer HP officejet Pro 8600 Plus keeps shutting down if I print or make more than 5 copies then gives me a message to avoid damage shut down the printer with the on button. Well it shuts down on its own.

Hello mb_bernhardt,
Welcome to the HP Support forums. I understand that your Officejet Pro 8600 Plus printer is giving you a Printer Failure message and then the printer shuts down.
I’ve included the A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document. If the error message that you’ve received includes an Error code there is one set of instructions to follow, and if there is no Error code there is another set of instructions to follow.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Officejet Pro 8600 Plus (UK purchase) will not connect to wired ethernet network

Hi
We have an HP Officejet Pro 8600 Plus (purchase here in UK approx 9-12 months ago) which has sort of worked OK wirelessly but finance industry compliance requirements now require me to connect to it by normal ethernet cable.
When I disable wireless and plug in a (tested and working) ethernet cable it does nothing. I have done a factory reset (via the screen menu) to remove any previous settings. Turned off, turned on, still nothing.
I have restored Network defaults also using the menu command within settings - network; no difference.
In Network - wired summary the screen says:
IP: Not applicable
MAC: xxxxxxxxxxx (not for sharing here)
Hostname: xxxxxxxxx (not for sharing here)
Wireless Direct: Off
I have tried it with IP settings turned to Automatic (DHCP) - no joy.
I have tried it with IP settings turned to Manual(Static) - when i then type in the static IP address that is within the router range (but outside the DHCP reserved range) as soon as I press Done, the settings are lost i.e. 192.168.0.102 - push 'Done' and the IP goes back to 000.000.000.000
The same when entering the default gateway and subnet masks.
I have restored to defaults several times, tried manual and DHCP several times, no joy.
Please let me have some serious suggestions at the earliest opportunity. Just to reiterate I have tested the network connection and cables with other ethernet equipment and they are working. My questions include:
1. Anyone know how to make this printer actually store the manually entered IP addresses etc?
2. What am I missing about the wired setup?
3. Is this a known issue? Is it an issue with the hardware ethernet socket or something?
4. Also in this forum there are references to a Hard Factory reset that is apparently different to the menu 'Reset to Factory Defaults' but links to an article about it just give a 404 error, not found. [Does HP actually have two different levels of Factory Default and if so, God knows why! Does anyone know a working link to this information please?

Hello Qw8, welcome to the forums!
I read your post about not being able to successfully install your Officejet 8600 Plus to your wired network. I will do my best to find suggestions for you to try. I would first like to know which Operating System you are installing the printer on to help me with my research.
If you haven't already, run the installation (HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g Drivers) with your security and firewalls disabled to see if the proper connection can be made.
I do see you ask about other resets and there are others however, at this stage they may not be needed. If they are, I can send you a private message at that time with that information.
Please let me know your OS and we will go from there!
Have a wonderful weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP officejet pro 8600 plus need to reset, but no screen access due to head error

hi,
I had some HP's 8600 but one of them it is dead as printer and it was replaced.
I need to use it only as scanner (no printing since its problem are the printing heads). The problem I cannot access to the menu through the screen since it is stock with the message mentioning the fail on printing head. The next option it is to watch a demo about heads.
Im trying to access in order to fix a new static ip for the scan.
Is there a way to reset so the printing gets an dhcp ip add? So far the scanner works fine through USB connection.
Thanks in advance

Hello @Rodrigo_cl,
Welcome to the HP Support Forums!
I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer has encountered a hardware Printhead failure and is not allowing you to scan using a static IP because of this. I would like to assist you today with resolving this issue.
Now, due to the error on the front panel of the printer, you will not be able to perform any resets on your machine. But, if your printer is currently on the network with an automatic IP we can utilize the embedded web server to configure a static IP.
Is your printer currently on your wireless or wired network?
Once I know if your printer is currently on the network, I can guide you towards configuring the static IP through the computer. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Officejet Pro 8600 Plus - Apps Error - 'Connection Error'

Hi,
Newbie question maybe, but it's got me a little stumped.
I've an HP Officejet Pro 8600 Plus on a wired connection to my Sky router/ADSL modem, using a static IP.
when I go into Apps it pulls down a list of the installed Apps OK, but when I select any one from the printer control pad it tries to connect then throws an error. I can;t see a place I should set anythign up.
I have a woerkign hp ePrint Center account, ePrint works (eventually!) when I email docs to my eprint email address, adn also via Google Cloud Print and Apple AirPrint. While it;s not ruining my life, I would like all of the printer functions to work :-)
I can print to a network folder, as long as it;s on a PC, although my NAS it won;t print to for some reason, but I guess that's a further question :-)
Any help very much appreciated!!!!
MF668

Hi MF668,
Try setting an alternative DNS and check if that may help:
Press the wireless icon on the top of the printer screen and locate tis IP address.
Browse to the printer's IP through the web browser on your PC.
Click the Network tab.
Under Wired click on IPv4.
Under DNS Address Configuration select Manual.
Set the Preferred address as 8.8.8.8
Set the Alternate address as 8.8.4.4
Click Apply to confirm the change.
Now turn the printer Off and back On and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My officejet pro 8600 plus drops the LAN network connectivity , eprint works, and fixes LAN

OfficeJet Pro 8600 Plus , computer running XP service Pack 3, Wired to ethernet network with static compatible IP address.
When printer sits idly, loses LAN connectivity. Scanner and printer not seen by the computer. Unplugging cable, restarting printer does not solve the "Unable to communicate with Printer" error message.
The printer remains connected to the internet and sending an ePrint job from my Blackberry phone wakes up the connection between the computer and the Printer and scanner.
Any idea what is going on here and is there a better fix then sending a print job from my Blackberry?

I have the same problem. I'm even able to print from the EWS (Embedded Web Server) website since, even with this problem, I still have a working wireless Internet Connection. To do this just enter 192........ as the URL. The "192..." is the IP address of your printer.
I was online for over 3 hours in a chat session with an HP tech which proved totally worthless. These guys work out of a script (which is wrong in many instances) and are essentially useless unless you can get to a higher level of tech support. In fact, there can be serious damage to your computer if you blindly follow their advice.
My next step is to go higher up in the HP "food chain".
Good Luck

Officejet Pro 8600 Plus won't print or scan wirelessly using Mac OS 10.

Mac OS 10.9
Wireless
My printer was working fine until today. Then when I used the control panel to scan a page I went through the steps and got to scanning and got the message I needed to enable "Scan to Computer" in the HP Utility. I went there and it was unchecked. Seems I had this problem every time I did a new scan job in the past. It wouldn't retain than check. So I checked it and after awhile I got the message "Communication Error" and to check my connections and if that didn't work restart my computer and printer. I did that and also restarted the router but it didn't help.
Then I tried printing from Word, which has always worked but it didn't this time. The printer icon on the right of the dock came up, bounced a few times then disappeared with nothing happening on the printer.
So I deleted and reinstalled the printer. No help. I downloaded and installed HP software and firmware updates. No help. I went through wireless setup. No help
BTW, all along I got good "Wireless Network Test" results. I says it's connected but nothing happens when I try any functions of the printer.
If I can find a USB cable I will try to see if wired works.
Any suggestions would be appreciated.

Hey @neoflyer,
I would like to assist you today with resolving the wireless printing and scanning issues you're experiencing on your HP Officejet Pro 8600 Plus e-All-in-One Printer on your Mac OS X 10.9 Operating System. You mentioned that you have powercycled the devices, reran the wireless setup, and uninstalled and reinstalled the software and drivers to no avail. I'm going to suggest a few additional troubleshooting steps to verify if this is a computer issue or a network issue.
Step 1: Gather the IP and Open the EWS:
1. On the screen of your printer select the wireless button:
2. Under the Wireless information you should see your IP address
3. Open up your internet browser on your Mac computer and in the website address bar just type in your IP address. Please do not include www.
4. After you enter your IP address in the website bar go to that website
5. If the website for your printer opens than that proves with 100% certainty that your printer and computer are 'talking' to each other on your wireless network. If the website fails to open than you have a network communication issue with your router.
If the website fails to open please powercycle your network again:
How to Properly Powercycle a Network:
First, unplug the power cable to your Router
Once your Router is unplugged, turn off your printer
Next, shut down your computer
After 30 seconds to 1 minutes, plug your Router back in
Next, turn on your printer
Turn on the computer
After a few moments check on your computer and ensure that the internet is working. Once it is, hit the wireless button again on the printer to see if your printer got a new IP address. Using the IP address enter it in the address bar of your internet browser and now see if the website for the printer opens.
If the website for the printer opens successfully please follow the steps below:
Step 1: Uninstall Drivers and Software:
From the computer desktop, double-click the Macintosh HD, and then click Applications.
Click the Hewlett-Packard folder.
Double-click the HP Uninstaller, and then click Continue.
Select the product to uninstall, and then click Uninstall.
When prompted, type the Administrator name and Password, and then click OK.
From the Macintosh HD menu, click Users.
Click the correct user name.
Click Library.
Click Preferences.
Click and hold the cursor on the first file that starts with "HP," and then drag the file to the Trash icon on the taskbar. Complete this step for each file that starts with "HP."
Close out of Preferences.
Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
1. Please click the following link to download the appropriate Mac OS X 10.9 drivers for your printer: Mac: HP Officejet Pro 8600 series Full Feature Software and Drivers
2. Once downloaded, run through the step by step screens to reinstall your network printer
3. Once the printer is reinstalled, attempt a print and a scan!
Please let me know if these steps resolved your issue. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Printing from Motorola Xoon tablet to Officejet Pro 8600 Plus via Android ePrint app

Hello!
My Officejet Pro 8600 Plus printer
- is connected to my Laptop (Win7 64bit) via USB cable
- is connected to my router via WLAN
- is configured to use ePrint with a registered mail address
My Motorola Xoom tablet3
- has Android Ice Cream Sandwich 4 installed as operating system
- has the HP ePrint Home&Biz app installed
ePrint
- ePrint app is configured
- the app identified/shows my printer as it should
- I successfully registered to ePrint on the HP website
- I am using a registered mail address for connection between app and ePrint online
As soon as I select a document on my tablet and try to print it,
- the app shows up a "rendering document" message for a short time
- a preview of the document should show up, but it doesn't!!
- I can see the selected document as "pending" print job
- no documents will be printed
- pending documents can't be deleted and remain in the tablet's display
So, I desparately need help! Why does my printer not receive or print the documents from the Xoom tablet?
Thanks a lot for your help!

I understand that It was not a problem with the connection. When dealing with wireless networks, it is always a good idea to set a static IP. It makes things more stable. The reason I told you to enter Google's DNS was not to connect you to Google. All a DNS does is create a pathway to the internet. Once any device finds the internet via the DNS it then goes where it is supposed to. It just uses the DNS as a referance for the internet. Web services should work fine with your router DNS, I have just had more success using Google's public DNS.
You never mentioned wether you did all the power cycling that I asked you too. I know it does not make sense, but power cycling everything on the network so it can all reconnect fresh, solves most issues like this one. However, if you have power cycled everything and you are still having issues, then try removing the Xoom and the printer from the network, and reconnecting them. Sometime, you have to completely remove the printer and mobile device from the networks and reattach them before they will comunicate.
If none of that works, you may need to call the cloud services department to have them take a look at the issue. You can find the number by logging into your ePrintCenter.com acount and looking under the help section. When you get an agent on the phone make sure to tell them everything you have done, so they do not have you do the same steps. Honestly at this point if it is not working the next step is a semi-full reset, which will cause you to loose your ePrint email address, as well as reset everything back to factory settings on the printer. I am not allowed to share how to semi-full the printer via the forums, however the phone agents can walk you through one.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP Officejet Pro 8600 Plus and HP Pavilion dv7-7073ca

1. HP Officejet Pro 8600 Plus and HP Pavilion dv7-7073ca
2. Operating System
Windows 7 64-bit
3. Error messsage: Blue Screen and Crash. Can't PRINT Wirelessly or Wired + Blue Screen Of Death when printing a document with Microsoft Office. It then restarted the entire computer.
It might have said something about BIOS
4. Any changes made to your system before the issue occurred
No, all I did was install the software that came on the Officejet disc
I don't know what to do. I tried to create an adhoc network, and that didn't work. I tried to connect it via usb cable and the whole computer crashed. I tried to set up a router and then it would not connect to the internet.
Why is this design so flawed? Every wireless printer I have had does this and will not work easily or permanently. You should just be able to connect instantly to your computer and voila, you can print. But nothing seems to work. Mind you, the constant variable here is me, and I have little patience for spending days trying to get this to work. But I am a student, and this is holding back valuable study time.
What do I do???
Any advice appreciated...can someone tell me step by step how to do this? I followed the instructions in the books, but ended up well...you know, so that's why I'm here.

I had the same issue, officejet pro 8600 plus causing blue screen of death on my new computer. After several frustrating months trying everything, I fould that my new computer has 3.1 USB ports, this printer doesnt like them, they need a 2.1 USB port.
For whatever reason USB ports are not backwards compatible, so I plugged the USB cable into the 2.1 port and no more crashes.
3.1 ports are blue, 2.1 ports are black ( the plastic inside)
Hope this helps

Hp Officejet Pro 8600 Plus network printing problems

I hard wired my Hp Officejet Pro 8600 plus with an ethernet cable to my router to enable other computers on my network to print to my printer. Several problems have resulted because of this:
1. I cannot find my printer in the Device Manager: it shows as an "unknown device"
2. Sometimes pdf files will print and sometimes they will not. Word and Excel files sometimes print, and sometimes don't.
3. Sometimes documents will spool, but then I get the following message: "Unable to communicate with printer." Then it asks me to make sure all cables are connected and power is on, which is the case.
I have tried all kinds of troubleshooting with information found in Hp forum and on Hp website. Finally, using the HP Print and Scan doctor, I deleted and reinstalled the printer and updated the Full software and drivers. Then I got a message saying "the printer is on your network, but the network software is unable to find it using the typical network discovery method. You can install the printer and operate it normally over the network using the IP address of your printer." I inserted the IP address and it took me through various steps to final installation. I typed a short message into a new document on Microsoft Word and it printed, Then I tried to print some information from the HP website, but this did not print; it didn't even spool.
My router is not detecting the printer on the network either, the light on the port bearing the network cable connected directly to the printer has never been shown to be on, like the other lights. I have been struggling with this for the last several months.
I have an Hp computer, running on Windows 7 Ultimate (64bit). I prefer to use my printer over a network ethernet cable instead of wireless. Please help!

techlearner3 wrote:
My router is not detecting the printer on the network either, the light on the port bearing the network cable connected directly to the printer has never been shown to be on, like the other lights. I have been struggling with this for the last several months.
I believe this is the cause of your problem. First, try another known working port in the router. Next, change the Ethernet cable with a known good cable.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Officejet Pro 8600 Plus - wired w/static IP address, stops working & need to reboot the computer

Similar Messages

Maybe you are looking for