Officejet pro 8600 plus won't shut off

About a week ago my HP Officejet Pro 8600 Plus stopped responding to the power button. Now the only way I can shut off the machine is by unplugging it. The power button in front of the machine wont work anymore. Please help!

Hi everyone,
I understand you're all working with an Officejet 8600 that's not responding to the power button. I will certainly do my best to assist you all.
Mrstenter had posted a firmware update that if you haven't done yet, it is definitely recommended. If that doesn't resolve your issue though, it could also be a power issue. Please make sure your printer is plugged directly to a wall outlet not a power strip or surge protector.
If after those two things the printer still won't respond to the power button, please call HP Tech Support for your area and inquire about an in warranty replacement or and out of warranty trade in.
Hope this helps, have a great day!!

Similar Messages

Officejet Pro 8600 Plus won't print or scan wirelessly using Mac OS 10.

Mac OS 10.9
Wireless
My printer was working fine until today. Then when I used the control panel to scan a page I went through the steps and got to scanning and got the message I needed to enable "Scan to Computer" in the HP Utility. I went there and it was unchecked. Seems I had this problem every time I did a new scan job in the past. It wouldn't retain than check. So I checked it and after awhile I got the message "Communication Error" and to check my connections and if that didn't work restart my computer and printer. I did that and also restarted the router but it didn't help.
Then I tried printing from Word, which has always worked but it didn't this time. The printer icon on the right of the dock came up, bounced a few times then disappeared with nothing happening on the printer.
So I deleted and reinstalled the printer. No help. I downloaded and installed HP software and firmware updates. No help. I went through wireless setup. No help
BTW, all along I got good "Wireless Network Test" results. I says it's connected but nothing happens when I try any functions of the printer.
If I can find a USB cable I will try to see if wired works.
Any suggestions would be appreciated.

Hey @neoflyer,
I would like to assist you today with resolving the wireless printing and scanning issues you're experiencing on your HP Officejet Pro 8600 Plus e-All-in-One Printer on your Mac OS X 10.9 Operating System. You mentioned that you have powercycled the devices, reran the wireless setup, and uninstalled and reinstalled the software and drivers to no avail. I'm going to suggest a few additional troubleshooting steps to verify if this is a computer issue or a network issue.
Step 1: Gather the IP and Open the EWS:
1. On the screen of your printer select the wireless button:
2. Under the Wireless information you should see your IP address
3. Open up your internet browser on your Mac computer and in the website address bar just type in your IP address. Please do not include www.
4. After you enter your IP address in the website bar go to that website
5. If the website for your printer opens than that proves with 100% certainty that your printer and computer are 'talking' to each other on your wireless network. If the website fails to open than you have a network communication issue with your router.
If the website fails to open please powercycle your network again:
How to Properly Powercycle a Network:
First, unplug the power cable to your Router
Once your Router is unplugged, turn off your printer
Next, shut down your computer
After 30 seconds to 1 minutes, plug your Router back in
Next, turn on your printer
Turn on the computer
After a few moments check on your computer and ensure that the internet is working. Once it is, hit the wireless button again on the printer to see if your printer got a new IP address. Using the IP address enter it in the address bar of your internet browser and now see if the website for the printer opens.
If the website for the printer opens successfully please follow the steps below:
Step 1: Uninstall Drivers and Software:
From the computer desktop, double-click the Macintosh HD, and then click Applications.
Click the Hewlett-Packard folder.
Double-click the HP Uninstaller, and then click Continue.
Select the product to uninstall, and then click Uninstall.
When prompted, type the Administrator name and Password, and then click OK.
From the Macintosh HD menu, click Users.
Click the correct user name.
Click Library.
Click Preferences.
Click and hold the cursor on the first file that starts with "HP," and then drag the file to the Trash icon on the taskbar. Complete this step for each file that starts with "HP."
Close out of Preferences.
Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
1. Please click the following link to download the appropriate Mac OS X 10.9 drivers for your printer: Mac: HP Officejet Pro 8600 series Full Feature Software and Drivers
2. Once downloaded, run through the step by step screens to reinstall your network printer
3. Once the printer is reinstalled, attempt a print and a scan!
Please let me know if these steps resolved your issue. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Officejet Pro 8600 Plus Won't Fax

My printer and scanner works fine, but it will not send or receive a fax. I went through all the troubleshooting steps on the hp website and it still won't fax. I'm not sure what else to do. The phone line is good.

Hi Cathy_Orleans, welcome to the forums,
I understand you are unable to send or receive faxes from your Officejet 8600 Plus. I would suggest trying all of the troubleshooting steps in the guide below for this problem.
Cannot Send or Receive Faxes
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet Pro 8600 Plus - won't print wirelessly

Installed a new 8600 Plus printer. Installed it onto my network. My laptop sees the printer and the scanning function will fire off and talk back and forth with my laptop. When I try to print, though, the printing fails with "Unable to Communicate with Printer" error. Any ideas on how to solve this?
This question was solved.
View Solution.

I have already tried the HP Scan & Print diagnostic. All tests pased, however I still cannot print wirelessly.

HP Officejet Pro 8600 Plus won't scan in color

I have had this printer for a couple years, and it worked fine. Even though I have done it before, today I cannot scan a photo in color. I have tried scanning as JPG and PDF and Everyday Scan. I set the scan to color, but it always comes out in B&W. I checked to make sure I had the latest drivers installed. What else can I do?

It's my pleasure Surfbored, but I must admit, I am puzzled!
I am going to do some research and will return, if a take a day or too don't think I have forgotten about you. I appreciate your patience.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printer won't print - HP Officejet Pro 8600 Plus All in 1

Hi,
Please can anyone help me ?
I have Windows 7, 64 bit HP computer with a HP Officejet Pro 8600 Plus All in 1 Printer.
It printed over the network/wireless yesterday. I then had a problem scanning to the computer so I followed advice on the HP community and uninstalled and re-installed the latest software/driver for the printer.
Today it WON'T PRINT!! The printer has a connection to my router (Plus Net Technicolor N router) and shows the little symbol on the printer screen. I tried printing my work today and it says the printer is offline - it can't be as the printer is ON and has a signal connection.
I have uninstalled, reinstalled, turned it on and off on the printer, I've restarted the computer, I've unplugged and plugged in all of it - the router, computer and printer. The computer has the green tick to say the printer is the default and it is ready. It then says to check the network connection or it maybe to do with the firewall settings, but these I haven't changed for over 1 month and I've printed loads of stuff between then and yesterday.
I desperately need my printer and short of going to have to buy a brand new one - I don't know how to fix it!!!
Please can anyone out there help me??!!!
Help!!!!!!!!!!
Thanks for any helpful advice
Victoria

Just to say as well that on the top of the 'X there is a problem printing' At the top where it says the printer - it has on it 'Fax - HP Officejet Pro 8600'
So it is trying to print from the 'Fax' part of the printer and yet when I change the printer device to the actual 'printer' part to default it always changes back to the 'fax' Officejet Pro 8600 Plus rather than the Officejet Pro 8600 Plus.
I will uninstall all the elements to the printer and then find the latest driver to the printer and start again to see if that helps.
Please help me!!!
Thank you for any helpful advice
Victoria

HP Officejet Pro 8600 Plus, printing from web cuts everything off on right side

Hello,
I am having a problem with my HP Officejet Pro 8600 Plus cutting of everything ont he right-hand side of my pages when i print anything from the internet.
I am currently using Windows 7 and I am printing from Firefox.
I use Gmail and anything I print from there does the same thing. I see on several other posts here that they tell people to go to the File menu and choose preferences, but when printing from Gmail, I do not see anywhere that has a drop-down File menu to choose from. I also see several people saying to choose landscape orientation to print, however it still cuts off the right side when I choose the landscape option.
When I print from Gmail I am just hitting the printer icon on the upper right corner of the email itself (when you put your mouse over the icon it says "print all"), or I click on the drop-down menu under that icon and choose "print".
When I am trying to print some web pages, I can hit the download arrow to the right of the google search box and then print the downloaded page instead. This usually corrects the problem, but sometimes when I try to download a page, it says there is nothing to download.
Any help you can offer would be greatly appreciated!!
Thank you,
Steel

Hi @steel13
Since the issue only occurs when you print from Firefox, I feel it would be most beneficial if you reach out to Mozilla.
You might first consider resetting Firefox print settings; Fix printing problems in Firefox.
Best of luck.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

[win7 64bit ultimate]: HP Officejet Pro 8600 Plus prints won't scan

Guys I have spent 2 days on reading and trying all of the suggestions in previous posts. My HP Officejet Pro 8600 Plus JUST won't scan. When I click to scan a Document or Photo the HP Scan pops up saying: The HP Officejet Pro 8600 was not found.
When I do unistall the HP basic software and then install again it works fine. However when pc restarts problem is still there.
I have completely uninstalled my avast Antivirus and also configured the windows firewall. No luck till now.
Tried the HP Print and Scan Doctor: It appears that the problem is in the device manager. Edited: Just looked at the device manager and spotted this >
If I reinstall it will work only till my next restart.
Any suggestions?

@N3CR4, welcome to the forums
I read about how you cannot scan and have been troubleshooting quite a bit lately, to no avail.
I have some questions and some ideas for you. If you've tried the steps, just let me know the results. Here are my ideas for you.
Have you uninstalled the printer by right clicking on them in the Device Manager, as shown in your screen shot, then restarted your PC and reinstalled?
Have you tried creating another User Account with Admin privileges and tried installing?
Try a clean boot, and restart the PC and ensure your Firewalls and Anti-Virus scanners are disabled and try running the installation.
Will the printer install successfully on another PC?
Remove the printer by using the Microsoft Fix it tool, restart the PC and try installing again.
Try unregistering and re-registering the Microsoft Windows Installer service:
1. Click the Start menu and type " cmd " in the search field and press enter.
2. Type in " msiexec /unregister " and then press enter.
3. Type in " msiexec /regserver " and then press enter.
4. Restart your PC and try the installation.
Run the SFC scan to repair any corupt files. (Run the scan 3 times if there is an issue in the results) then try installing the printer again.
Using System File Checker to Restore System Files
I really hope the steps help, let me know the outcome
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My HP Officejet Pro 8600 Plus is always off line and doesn't print anymore

I use my HP Officejet Pro 8600 Plus with the wi-fi.
it worked for 3 months, in the las week it is not working anymore.
I verified the Ip , I verified the connection.. Nothing works
it is really frustrating
thanks for helping
Chiara
This question was solved.
View Solution.

Hi there @Mizia , Welcome to the HP Forums!
I saw your post about your Officejet 8600 Plus disconnecting from your wireless network, and I hope to help. I have some suggestions for you to try below that could help re-establish the connection between the two!
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
Try the steps in this document:
HP Officejet Pro 251dw, 276dw, and 8600 Printer Series - Printer Does Not Maintain Wireless Connecti...
Hopefully the connection is back when you're done the steps above. If there are any issues, please let me know the details and also include with OS you're running on your computer.
Have a great Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP officejet pro 8600 Plus shuts down on its own while making numerous copies.

My printer HP officejet Pro 8600 Plus keeps shutting down if I print or make more than 5 copies then gives me a message to avoid damage shut down the printer with the on button. Well it shuts down on its own.

Hello mb_bernhardt,
Welcome to the HP Support forums. I understand that your Officejet Pro 8600 Plus printer is giving you a Printer Failure message and then the printer shuts down.
I’ve included the A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document. If the error message that you’ve received includes an Error code there is one set of instructions to follow, and if there is no Error code there is another set of instructions to follow.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Hp officejet pro 8600 plus .. won't scan to e-mail

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g; Windows 8
Why am I now getting this error message when attempting to scan to email "Username or password is incorrect. Make sure both user account and password are valid." There were no changes in passwords so not sure what needs to be done to correct the issue. I am now also having problems with faxing.
Please HELP

Hi HelpMsP,
Welcome to the HP Forums.
I see that you are having an issue with the user name and password when attempting to scan to your email.
I suggest Resettling the Network Defaults on the printer. To do so, On the main display of the printer, please use the right arrow key and go to the Setup Menu. Please scroll down to and select Network settings. Please go to the last menu in the list and select Restore Network Defaults.
This will reset the user name and password and you can then re-enter your information.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

Officejet Pro 8600 Plus - Apps Error - 'Connection Error'

Hi,
Newbie question maybe, but it's got me a little stumped.
I've an HP Officejet Pro 8600 Plus on a wired connection to my Sky router/ADSL modem, using a static IP.
when I go into Apps it pulls down a list of the installed Apps OK, but when I select any one from the printer control pad it tries to connect then throws an error. I can;t see a place I should set anythign up.
I have a woerkign hp ePrint Center account, ePrint works (eventually!) when I email docs to my eprint email address, adn also via Google Cloud Print and Apple AirPrint. While it;s not ruining my life, I would like all of the printer functions to work :-)
I can print to a network folder, as long as it;s on a PC, although my NAS it won;t print to for some reason, but I guess that's a further question :-)
Any help very much appreciated!!!!
MF668

Hi MF668,
Try setting an alternative DNS and check if that may help:
Press the wireless icon on the top of the printer screen and locate tis IP address.
Browse to the printer's IP through the web browser on your PC.
Click the Network tab.
Under Wired click on IPv4.
Under DNS Address Configuration select Manual.
Set the Preferred address as 8.8.8.8
Set the Alternate address as 8.8.4.4
Click Apply to confirm the change.
Now turn the printer Off and back On and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Troubleshoot scan to email officejet pro 8600 plus

printer cannot connect to the server. Name and address both verified by ISP. any other suggestions?

Hello kaybe123,
Welcome to the HP Support Forums!
It appears that you are unable to Scan to Email with the Officejet Pro 8600 Plus, getting server connection errors. I would like to offer a few suggestions that I hope will help you get this working.
Check for updates on the printer, Getting the Latest Firmware and Product Updates.
Power off the printer and ensure the power cord is connected to a wall out let.
Next you want to power reset the router. If it has a power button press that, if not, remove the power cord. Wait 60 seconds and then allow it to power back up. Once router is fully on, power up the printer.
Test the Scan to Email, if it works there is no need to continue. If it doesn't, try the next suggestion.
Refer to this Thread answered by a colleague of mine happytohelp01 : Efax 7510 still won't work after turning off/on ePrint several times. Follow the steps to setup a Manual I.P and DNS for the printer over the network. The steps will be the same, if not very similar for your printer as the one in the above post.
Try to Scan to Email once done. If still unable to Scan to Email, continue below.
Go back to the above Thread, rather than using the DNS suggested try this set; Primary DNS Server : 209.244.0.3 & Secondary DNS Server : 209.244.0.4.
Try to Scan to Email, if the feature is still not working you will need to call HP's Cloud Support team. If you live in the USA/Canada, 1-855-785-2777. If you live outside the USA/Canada, click HERE to find the Technical Support number for your country/region.
Best of luck.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Officejet Pro 8600 Plus

Hello.
I have the Officejet Pro 8600 Plus running on Windows 7. The printer is connected to computer by network and it is linked to the computer.
All was well with the printer untill I removed Norton and installed McAfee two days ago. Now it will not work, even with McAfee turned off.
I tried to uninstall and re install the printers programmes and driver, but it will not re install the programme or driver.
I have uninstalled all HP prog's.
Stopped all start up prog's except the Microsoft ones.
Turned off McAfee
Gone to HP and re installed the software and drivers.
These downloaded fine (took a few minutes and 123.00 MB copied) and installed.
Accepted HP licence terms and ran printer installation programme.
Got instalation complete message.
But it is not installing! Where is it downloading the programme and driver to?
Downloaded the HP Print and Scan Doctor. This finds printer and says programmes not installed. it then downloads them, but it never works. Even with McAfee firewall and scanning all turned off. If I then run it again, I get the same mesasage the programmes not installed, though it just seemed to do it....
If I go to devices / printers there is no Officejet Pro icon like there was. If I try install new printer there, I does not find the correct drivers for this HP model.
If I go to Start, all Programmes, HP and click on these icons I get message "Shortcut moved or changed"
I am at whits end with this now. Absolutly hate the McAfee.
Please help. Nick
PS.
I have got the printer partly working by using the windows available driver HP Officejet Pro K8600 Series, but this is not the correct driver. It will not scan and has very limited printing functionality.
Windows also shows a FAX - HP Officejet Pro 8600 driver, but this did not work when I tried it. Is this the proper driver for this printer??
When I try to get windows to download new drivers it goes looking but says it is unavailable and to try again later. :-(

Hey there @Nick-S!
Thank you for posting on the HP Forums!
I can see that you are experiencing some software issues with the Officejet Pro 8600 after re-installing McAfee. I would be happy to provide some suggestions that may help resolve the issue!
I suggest restoring the network defaults in the printer, power cycling the router and reconfiguring the printer on the wireless network. To restore the network defaults press the Wi-Fi icon on the printer and go into settings. Under settings should be an option to restore the network defaults. Once the network defaults in the printer have been restored power cycle the printer and power cycle the router for 20 seconds. When the printer turns back on press the Wi-Fi icon again, go back into settings and run the wireless setup wizard.
I understand you have re-installed the software but the printer is still not recognised. I recommend uninstalling the HP software one more time. After the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
To uninstall HP software click here: Uninstalling HP Software
To perform a disk cleanup click here: Performing a Disk Cleanup
To download the HP software click here: HP Officejet 8600 Plus Software and Driver
Please post back and let me know how that goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Officejet pro 8600 plus won't shut off

Similar Messages

Maybe you are looking for