Officejet Pro 8600 Premium e-All-in-One - N911n photo paper Not a paper choice for Tray 1

For the HP Officejet Pro 8600 Premium e-All-in-One - N911n printer
I am running Windows 7 64-bit
No error Messages
New Printer setup
I do not see photo paper as a paper choice for in Tray 1
This question was solved.
View Solution.

Hi FrancoArdito,
Follow the steps below to print photo from Tray 1
1. Insert the 4x6, 5x7 or 8x10 photo paper into Tray 1
2. Open printer preferences from the printing application program
3. Click on Paper/Quality tab
4. Select the Paper Size, Media Type, and the the Paper source
5. Click Ok to save the settings, and then print from the application program.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • HP Officejet Pro 8600 Premium e-All-in-One - N911n cartridge errors

    Please help! I have an Officejet Pro 8600 all in one that is just over a year old, just out of warrenty... We don't use it much and so just had to change the ink cartridges for the first time. Once they were changed out, the printer gave me the warning that there is a cartridge error and that the Cyan failed. Even though it was a brand new cartridge, I bought another one and changed it again. I still get the same error message with the 2nd new one. I have been through everything on the HP website for troubleshooting this problem and nothing works! Please, does anyone have anything else I can do????

    Sorry to hear you are still having this problem. So the yellow was out and you replaced the yellow and then the cyan failed?
    Printers when left not used for some time, may have printhead issue, but if it's not even recognizing the cartridge, then more likely a hardware or board issue that may need professional service.
    One thing you can try is to update the firmweare (if not already), http://ftp.hp.com/pub/softlib/software12/COL41945/bi-101905-5/OJP8600_N911a_R1322C.exe
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • HP Officejet Pro 8600 Premium e-All-in-One - N911n - WORLDWIDE CROOKED ADF SCAN ISSUE

    I must say that I am extremely annoyed at the shear volume of how many people have shared the same exact issue as I have with this product, yet there has STILL not been any kind of product recall or acceptable fix/replacement. This issue is over 3 years old (at least for me). It is blaringly obvious this product is flawed when it comes to the ADF and producing crooked scans. I believe the paying public is sick and tired of getting the same response (clean it, etc). THIS IS A HARDWARE ISSUE! Why is HP not taking the appropriate actions for this product? I have never read so many complaints on the same exact issue (even fresh out of the box) and then NOT have a company recall the product. This is beyond terrible customer service.
    So, where do we go from here? Just eat it and save our money for a different product from another vendor? As I am sure I share the list with all the others whose warranty has well expired, but as these issues have been present since day one, why does warranty even matter at this point?
    Why can I not return this product for a new model?

    I have brought your issue to the attention of an appropriate team within HP.
    They will likely request information from you in order to look up your case details or product serial number.
    Please look for a private message from an identified HP contact.
    Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Unable to reset or add new email addresses on HP Officejet Pro 8600 Premium e-All-in-one N911n

    Unable to reset or add new email addresses on my HP Office jet J4680

    Hi johndavis196,
    Welcome to the HP Support forums.  I see that you are trying to add new email addresses to your Officejet J4680 printer.
    To better assist you, would you please provide some additional information:
    How is the printer connected (USB cable, ethernet, or wireless)? The Officejet J4680 supports all three methods.
    What operating system are you using on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
    Where are you trying to update the email addresses?
    Are you encountering any error messages? If yes, what is the error message and where is it displayed (printer or computer)?
    What steps are you taking before you are stopped?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

    HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.  I would like to have a custom size to work with a card making program.

    Can you help me out?
    I have an HP Officejet Pro 8600 N911a
    When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
    I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
    I am running OS X Yosemite 10.10.
    My printer's firmware is "up to date" as of 28-Aug-2014.
    This is what I did:
    1. Open System Preferences from the Apple menu.
    2. Click on the Printers & Scanners icon.
    3. Click on the + sign under the list of printers to add a printer
    4. Click on IP
    5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
    6. Ignore Protocol field (default is Line Printer Daemon - LPD)
    7. Ignore Queue field (default is blank for default queue)
    8. Ignore Name field (default is IP address)
    9. Ignore Location field (default is blank)
    10. Under the Use dropdown menu, I select "Select Software"
    11. HP Deskjet 9800 is not an option.
    I searched for 9800, but there is no HP printer with that number in the options.
    I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
    I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
    Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
    Selected File > Page Setup from menu
    Under the Paper Size drop down menu, I selected manage custom size.
    - Click + to add a paper size
    - Enter "2.75" in width and "6 in" height in the paper size fields.
    - Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
    - Double-clicked Untiled in the custom size list and rename the size as Receipt
    - Click OK to return to the Page Setup dialog box
    Under Settings: Page Attributes:
    - Format for "HP Officejet Pro 8600"
    - Paper size: Receipt
    - Orientation: "tall/portrait"
    - Scale: 100%
    - Click OK
    Select Format > Document and set all page margins to 0.25"
    Thank you. 

  • OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

    Hello:  I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software.  I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
    I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.  
    I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it.  Any help is appreciated.
    Thanks,
    John

    Hi,
    It's an option during the installtion process. Please try the following Utility:
       http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n.

    I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n.  I’m trying to set up HP Connect, but every time I create and account it tell me to log in using my Snapfish password.  When I use my “valid” Snapfish password, it comes back asking "invalid password".  How do I correct this?
    If I'm not on the correct board, please let me know which one I should use.
    Thanks
    This question was solved.
    View Solution.

    Hi. You are on the proper board!  Unfortunately to fix the account mis-match issue you are having you will need to share personal information.  To protect your identify and the security of your account I will private message you with what HP will need in order to get your Snapfish/HP Connected accounts synced up so you can use the web services!    
    Thanks!
    Although I am an HP employee, I am speaking for myself and not for HP

  • Officejet pro 8600 plus e-all-in-one color managment problem.

    please help, I'm a photographer and I own officejet pro 8600 plus e-all-in-one printer. I want to print my photos using this printer, but it never print them right, so I bought Colormunki photo to calibrate my monitor and my printer and match them together. The problem is I can't control the printer color management  !!! I want to disable it, so I can use the printer profile in Photoshop or other applications to get the right prints. my prints are darker when I set the color management to be handled by the application, or I make the printer handle it but I will end up with wrong colors. I really really need to change the profile of the printer. how ?????? otherwise I really have no use of it in my work.

    Jassim,
    Kudos to you for figuring out how to better control the outcome for what you require.
    I have learned something new today.  Smiling!
    Did you create the new profile manually or add it in from a previously saved setting?  Filename / filetype?
    It has been a while since I used Photoshop.  I am thinking I may take another look at my old favorite. 
    Edits << 27-Dec-2014  >> Added the following links:
    Profile Support Center
    How to use ICC color printer profiles for inkjet printers
    Click the Kudos Thumbs-Up!
    It is a nice way to say “Thank You" for the help.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • OfficeJet Pro 8600 Plus e All in One fax to e-mail help

    I purchased this unit yesterday for my office and I would like to have incoming faxes get sent to my computer as an e-mail.  I have gone through the digital fax setup process but I am not receiving e-mails notifying me of a fax.  Here are some specifics:
    HP OfficeJet Pro 8600 Plus e All-in-one printer
    Dell Inspiron 570 with Windows 7 64 bit OS
    System is on a network but not through a server. Does anyone know how to set up the OfficeJet so it will send me e-mail notification when a fax is received?  Any help is appreciated.

    Hi,
    You may set Fax to Email feature from the printer EWS page:
    On the product control panel, touch the Right Arrow ( ), and then touch Setup . The setup menu displays.
    Touch the Down Arrow ( ), and then touch Reports .
    Touch Network Configuration Page . The product prints a network configuration page.
    Locate the printer IP Address / URL to access the EWS:
    Type the printer IP Address on you browser to access the EWS page
    Click the Fax tab
    Click Fax to E-mail / Network Folder under the left column
    Click Start Wizard and follow the steps to enable the feature.
    Select Forward the Faxes to an e-mail address and proceed.
    Follow the steps and provide your email account SMTP settings, similar to those used for Outlook
    NOTE: You may contact your ISP to obtain the settings of your email server.
    Click Save and Test to verify any of the settings is correct.
    If you use a public email server (e.g. Gmail) and cannot find the needed settings, please let me know and i will try helping you to locate the server settings.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet Pro 8600 Plus e-All-in-One.

    I have set up an eprint account for my HP Officejet Pro 8600 Plus e-All-in-One. When trying to sign hpeprint.com account, i get a message of "not a valid email address."

    Hope you are doing well ovsc92
    Do you have an shapfish.com account?
    If this is the case let's merge the 2,
    "Do you have another HP account in existence?  Normally when someone has this
    issue, they have an existing Snapfish HP account.
    1. Go to www.snapfish.com and click on ""log in"" at the top right.
    2. On the splash screen that comes up click on the ""forgot your password""
    link and submit your email.
    3. You should receive an email with a link and a temporary password.4. Click on the link and log in with the temp password.
    5. Change your password to something that has at least 6 characters (at least 1 of those should be a number).
    6. Go back to www.eprintcenter.com and click on Sign In.
    7. On the next screen do not put your email or password, but click on the
    small Snapfish below.
    8. On the splash screen that comes up log in with your email and the password
    you just created at Snapfish. This will merge your HP accounts and you should be able to log in to www.eprintcenter.com normally after that."
    Let me know the outcome I will do my best to help you.
    Hope this is helpful;
    RobertoR

    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • HP Officejet Pro 8600 Plus e-All-in-One - terrible print & scan options

    I just purchased an HP Officejet Pro 8600 Plus e-All-in-One an the print options look like they were written by someone from the 1990s.  There are no options for lower resolution - only draft, normal, best and no option for black and white - other than grayscale.  The print options box is the default box that was originally develped in the 1990s - no kidding.  I also tried scanning some items and the box to see the scan is about 5" x 5" and there is absolutely no way possible to see what was scanned.  I originally loaded the software using the disk provided witih the printer, but then I went on line and downloaded the "Full" version - which loaded exactly what was on the disk.  I can not believe HP is even selling this thing with these types of drivers.  I loaded the drivers onto my HP Desktop, running Windows 7 home, 64 bit and my HP laptop running Windows 7 Ultimate, 64 bit.  Both HP computers are Intel I7 Quad core computers w/ 9 & 12 Gb of RAM respectively.
    What gives?  Do I need to return this thing because it certainly does not work properly and is not up to the HP standard we expect - especially for the $300 it costs to buy the thing.  I bought this all in one because HP refuses to update the drivers of my older HP scanner to support Windows 7.  That scanner showed the preview with a full screen, allowed me to change resolutions of scans, colors, etc.
    Has anyone else experienced this type of garbage?

    I agree the HP customer services and product services suck. I have an Officejet Pro 8500 and consistently had problems.
    I think I'll change to a Cannon printer or another company. It is apparent that HP does not care.

  • HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer

    HP Officejet 8600 pro Plus  N911g  model # snprc-1101-01
    I insert an SD card full of photos into the built in card reader - but have no option to send the photos to a file on my computer. Does this product only print but not send to a computer?  I need to edit the photos before printing.

    Hi @Rodney88,
    Welcome to the HP Forums!
    I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer, and I am happy to help!
    According to your printer's user guide found at this website, HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g User guides, as well as this guide, Printing From a Memory Card or USB Flash Drive. This printer only supports printing from SD cards.
    In order to transfer the files to your computer, you will need an SD Card reader for your computer.
    Hope this clears things up for you, and have a good day!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Officejet Pro 8600 Premium won't print cardstock - error message of "out of paper" appears

    My printer won't print cardstock, the error message says "out of Paper".  I have tried 3 different types of cardstock and it won't accept any of them.  It will print on plain paper.  Is this machine defective?  HELP...URGENT
    I must be able to print cardstock.  The computer was just set up today...it is brand new and purchased directly from HP.

    After trying a lot of different things, for some God-only-knows reason, this is the trick that worked for me. This is really more of a hack than a true fix, but I'm not picky when it's 2 AM and I don't have any other options:
    (1) In the paper tray, alternate one sheet of the cardstock paper with one sheet regular plain paper. Make sure the tray is full, but not over-full. (This HP help article says not to do that but... whatever.) 
    (2) In the Print dialogue box (however you can get to it) select the "Plain Paper" preset (not "thick paper" or "cardstock"). I had it on "Best" as you can see it the screen shot, but I don't think this is important.
    (3) I only had a single-page document, which I needed to print 30 copies of, so I inserted a blank page as a second page in the document file (a pdf).
    (4) I then made sure "Collate" was selected in my print settings.
    If you have a multi-page document, maybe you will need to insert a blank page every other page... which sounds like a pain, and I feel for you.
    Note: You'll need to monitor the printing closely - if ever the printer pulls two pages through instead of one, you'll need to pull the paper tray out and add a piece of paper so it's alternating correctly. 
    With this, I was able to print multiple copies without ever stopping. After a full day of fighting with the printer (which may or may not have included sacrifices of limbs under a full moon to the printer gods... just kidding) this was like magic.
    Hope this works for you - or other people who read this thread. This is a really frustrating situation.
    PS. Before I did this, I also did a full reset of the printer, which included:
    1. Turning off the printer and unplugging it for a full minute
    2. Printing 100 blank pages
    I have no idea if this helps, but if this hack isn't working for you, this "reset" is worth a try.

  • HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g power surge

    Had a power surge on the printer due to a storm. Now the printer won't power up. Tried plugging it in a different electrical outlet, but it still won't power up. Is there a way to reset the internal power supply since I assume there is some type of surge protection on the printer?
    Thanks, 
    Ray

    Hi raybo99,
    Welcome to the HP Forums.
    I see that you are having an issue powering the printer up.
    Please click on the following link for when The HP Printer Won't Turn On or Respond When the Power Button is Pressed.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n and duplex printing.

    on the product page where I went to buy the printer it says that this printer can do duplex legal, the info below is from the product page under specs.  The problem is that I can printer duplex on legal size paper.  Why and how I can fix that, because the reason I bought this printer is that it can do duplex: legal.
    Supported paper sizes
      Tray: Tray 1: Letter, legal, statement, executive, 3 x 5 in, 4 x 6 in, 5 x 7 in, 5 x 8 in, 4 x 10 in, 4 x 11 in, 4 x 12 in, 8 x 10 in, envelopes (No. 10, Monarch, DL)
    Duplexer: Letter; legal; executive

    Hi,
    Wow... Could you provide me a link to the site where you found the information on the "legal duplexor"?  I found this information on the A910n product page ... product specifications.  I found that it doesn't support the legal duplexing.
    Here is the link to the document:
    Product Specs
    You will want to expand the section supported paper sizes, and look at the table for legal.  There isn't a check mark for duplexing.
    How long have you had the product?
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

Maybe you are looking for

  • How to use the "Actions" in Photoshop Elements 11

    I am wanting to use the "Actions" in Photoshop Elements 11.  But when I get the actions box up, it is only showing a small list of effects to use.  The tutorials I have checked into all show a very long list of actions. When I click on the little arr

  • Zen Touch Battery Quest

    when i first bought my zen touch, i started loading songs on it through theusb port because i was told that the usb also charges the battery, but i didnot realize that the usb only charges the battery when the player is turnedoff, so when i loaded my

  • FKK_SAMPLE_4040

    Hi All, The above Function Module is in the event 4040 of T Code FQEVENTS. I have copied this FM to a Z FM and again linked it to Instalation specific Function Modules using T Code FQEVENTS. 1) When i create a fresh Sales Order using VA01 the event 4

  • Policies not applying to particular workstation

    Hi we run ZfD 3.2 sp3 and have Nov Cli 483 sp3. One of our workstations is not picking up policy changes. I have tried renewing the user's profile and reinstalling the client without success. Our network is EDir 8.7.3, Netware 5.1 sp7. Any ideas?

  • Yosemite Server stuck at boot screen

    Hello, we have/had a Mac Mini Server running. He is administered via screen-sharing. We encountered problems with LDAP / Open Directory and I was trying to unload a launched configuration via: sudo launchctl unload /System/Library/LaunchDaemons/org.o