Officejet Pro 8610 Airprint worked, then no more

Airprint worked my Iphone 4 recognized the printer for 3 printings, then no more!
Tried to restart them all (iphone, router, printer) but no result...
Thanks in advance
Denis

Hi Denis (@giletvert)
Welcome to the HP Support Forums. I see that you are unable to print to your Officejet 8610 from your iPhone using Apple’s AirPrint feature.
I have included the Printing Over a Wireless Network with Apple's AirPrint FAQsdocument. It has a section titled “What if a 'No AirPrint Printers Found' message displays on my Apple device?”. It sounds like you have already completed several of the steps included in that section. My recommendation is to review the section and confirm that you have tried all those steps.
Please let me know the outcome.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Officejet Pro 8610 - Answer a call by phone then receive a fax REMOTELY

Hello everyone
We just bought and installed an Officejet Pro 8610 as a fax machine on our home/office phone line.
The phone line also receives regular calls and a phone is connected to the line BUT 2 FLOORS ABOVE.
Is there a way to receive a fax after answering the call from the phone ?
If the phone was close the Officejet we could start the fax using the touch panel, but this is not the case.
We had a standard fax machine (Sharp UX-238) that can be started remotely right from the phone that answers the call simply digiting "5**" .
(see also http://files.sharpusa.com/Downloads/ForBusiness/DocumentSystems/MFPsPrinters/Manuals/MX6240N_7040N/c...
We wondering if similar behavior or so is available on the Officejet Pro 8610.
This question was solved.
View Solution.

Hi,
If yo pick up your phone and hear a fax sounds, dial "123" from your phone and that should cause the fax to answer the call.
If you do not see such response, ensure that Error Correction Mode is enabled within the printer setup and check again:
On the printer control panel, swipe the display to scroll to Setup , and then touch the Setup icon ( ).
Touch Fax Setup , and then touch Advanced Fax Setup .
Touch Error Correction Mode .
Touch On.
Touch the Home icon ( ) to return to the main screen.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP officejet pro 8610 won't accept remanufactured generic ink.

My NEW HP Officejet Pro 8610 Printer will not accept my generic remanufactured ink cartridges.
My previous printer did "HP OfficeJet Pro 8600" accepted these remanufactured generic ink cartridges but the feed rollers were giving out after 16 months, so I bought another printer from HP. There were no 8600's to be found, so I looked into the 8610 and saw that it accepted the ink I had been using in the past "HP OfficeJet 951", and since I had many remaining remanufactured ink cartridges still remaining, I opted to purchase this new one. This is an earlier model, but very simiilar.
Now this printer is not accepting the ink at all. All these prompts I am getting. With the 8600 I got prompts also, but then it worked, but here it will not work and says:
"One or more cartridges appears to be damaged. Remove them and replace with new cartridges".
I have put in (3 total) two different times, and the previously unopened cartridges are rejected.
The newer model, the 8600 accepted them eventually, but the older model, the 8610 will not.
Is there anyone out here who has any helpful assistance?
Otherwise, I am just going to have to return this for an entire refund for this and my 2 year extended warranty.
Thank you.
steveman99

I am sorry. I guess I wasn't clear.
the printer had just exhausted all 3 color hp ink cartridges one after another. The same time.
it only rejected the remanufactured ink cartridges when they were first introduced to the 8610. And these never gave me any trouble with my previous 8600. Please reread my post you responded to adafafter you read this to refresh your memory because this is where myfrustrations lie. Why on my 8600 printer do they work. Yet the 8610, the older model, and my newly purchased printer rejects those remanufactured cartridges???
Thank you.

Times New Roman font will not print on HP Officejet Pro 8610

My new HP Officejet Pro 8610 will not print documents, spreadsheets, or printer test pages containing Times New Roman font (of any size). It does not put a job in the print queue. In Excel, I receive the "Generic_2_Q294552" error message. My setup: An HP Pavilion Elite computer NY809AV-ABA e9119t; running Windows 7 Enterprise SP1; HP Laserjet 5L, HP PCS 1310, and HP D4360 all print the font just fine. My new printer: HP Officejet Pro 8610, firmware revision FDP1CN1502AR, connected via USB cable. [Also connected via ethernet cable to cable modem.] What I have done so far to troubleshoot the last 3 days: Reinstalled the printer (3 times), the most recent today with an installer issued today; rebooted the printer; rebooted the computer after each significant change; updated the firmware in the printer; tried two different USB cables; tried printing the fonts in Microsoft Word 7, Microsoft Excel 7, and directly from the font file; reinstalled the Times New Roman fonts from backup; visited the forums and tried all of the solutions I could for any similar problem; tried the winprint, hpzppw71, and hpzpplhn print processors with both RAW and NT EMF 1.008 data types; found and repaired all problems I could find with any hardware and software, as well as updating all software to the latest version.

Thanks for trying to help. I am happy to report my experiments and results. Microsoft Word:I open a blank document. Type something in. Select the entire text. Change the font. When I change to some fonts (those listed on my DOES print) the document shows up in the print queue and prints. When I change to the other fonts (those listed as DOES NOT print) nothing happens. It just sits there. No messages. No crash. Nothing in the print queue. I can walk away for hours (as I have done) and come back and nothing has happened. When I change back to a DOES print font it prints. Change it back to a DOES NOT print font and it doesn't. Repeatable. Consistent. No configuration changes or installs have changed it. Microsoft Excel:I open a black spreadsheet. Type something in. Highlight the entire text. Change the font. When I change to a DOES print font it prints. When I change to a DOES NOT print font I get this: "Microsoft Office Excel Your file could not be printed due to an error on HP Officejet Pro 861 on 0. There are several possible reasons:. There may not be enough memory available. Try closing files and programs you aren't using.. If you use a network for printing, there may be a problem with the network connection or the printer driver.. There may be loose cables or a bad connection between your computer and printer.For more information about troubleshooting printing problems, chick Help. Show Help >>" when I click the Show Help >> button I get: "This error can be caused by:
General problems: The printer may be unavailable, the network may be down, the communication port to the printer may be corrupt or unavailable, a hardware error at the computer may have occurred (out of paper, paper jam, out of ink, out of toner, etc), and a language setting may need to be reset from the Regional Options control panel.
Local problems: There are several reasons for a local printer (a printer that is attached directly to your computer) to fail:
Check to make sure the printer has paper, ink, and/or toner and check the cables.
If the printer appears to be functional and a printer test by the printer itself indicates the printer is working properly, then check the cables, printer port from the computer, and configuration of the printer at the computer.
Occasionally, an application can develop a conflict with the printer driver and cause a memory leak which corrupts the printer port. If all else fails, restart the computer, recycle the power to the printer, and try printing again.
Occasionally it is even necessary to delete the printer driver and reinstall the latest version of the printer driver.
Network problems: There are various reasons for a network printer to be inaccessible: the name may have changed, it may be out of paper, out of ink, out of toner, down for maintenance, the network could be down, or a printer job previous to yours has stalled due to incorrect settings on the user's computer who last submitted a print job, or even your printer driver cannot communicate correctly with the printer. Network related printer failures are usually best handled by your local technical support.
Memory problemsn occasion, large print jobs with complex graphics or consisting of several hundred pages, which can consume large quantities of memory on the printer, may cause a problem (especially if there was an over run of memory at the printer). You may want to try reducing the amount of complex graphics in your print job, or break the print job up into smaller segments and see if that corrects your problem. It is not uncommon for a very complex graphic to have a defect or error which prevents it from printing on any printer. It may be necessary to load new or revised graphic converters or drivers in order to alleviate a problem of this type.
For more information about fixing problems related to printing, see Microsoft Windows Help and Support. (Click the Start button, and then click Help and Support.)" Excel keeps right on going. Doesn't crash. Just pops up the gray dialog box. Behind the box popped up is another box (that goes away then the dialog box is closed) saying: "Now printing page 1 of 1'Book1' on theHP Officejet Pro 861 on 0" The format of these messages does seem strange now that I look at it so carefully while trying to type EXACTLY what I see. I think I will try to shorten the name of the printer. Once again, Respectfully submitted for analysis, review, suggestions, and criticism. Tom

Officejet Pro 8610 won't accept new ink levels

I love my new printer but of course, I have run into problems. Once I was warned about ink levels in some of my cartridges getting low, I went online and purchased brand new HP brand replacements. The printer report confirms they are HP despite getting some sceptisicm from a tech agent about the authemticity of the ink since I didn't purchases directly from HP.
In any case, I know how to replace the ink cartridges and have done so for the 2 colours needing the change - cyana and black. Now, the printer does not recognises that it has new full cartidges. The printer keeps warning me that the cyan and black are critically low. Eventually, I expect it will stop printing full stop.
This is annoying. It seems like some kind of sensor issue and the printer is not getting the signal.
I have shut down the computer and printer altogther and rebooted both, no luck.
I have done another alignment and then shut off and on again (both computer and printer).
Nothing seems to work. Please help and don't tell me I need to buy new ink cartirdges again. They clearly WORK as I can print with them but the pronter WILL NOT RECOGNISE the new full ink levels. I need to know the levels in order to know when to purchase more ink in time for the next dry out.

Hey @CanadaMona,
Welcome to the HP Support Forums!
I would like to assist you with resolving the cartridge detection issues that you're experiencing on your HP Officejet Pro 8610 e-All-in-One Printer. I understand that you have already replaced the black and cyan cartridges to no avail. This issue does sound like it may be a printhead issue. The printhead is what reads your cartridges and controls the ink for going on the paper. If the printhead is defective it can cause issues with detecting cartridges. I'm going to run you through some troubleshooting steps to resolve this issue.
Step 1: Check the Printhead:
1. Place your fingers into the slot on the left side of the printer, and then pull to open the cartridge access door. The carriage moves to the left side of the printer. Wait until the carriage is idle and silent before you proceed.
1 - Slot for opening the cartridge access door
2. To the right of your black cartridge you will see the grey printhead latch. Please lift that latch.
3. Grasp the sides of the printhead, and then lift the printhead and pull it toward you to remove it. Please leave the cartridges in the printhead while you remove it.
4. With the printhead removed, close the cartridge access door.
5. Power off the printer.
6. Power the printer back on. Once the printer comes on it will give you an error indicating that the 'printhead is missing' or that the 'cartridges are missing or damaged'. At this point, open the cartridge access door.
7. Reinstall the printhead.
8. Ensure that you snap the printhead latch back down to lock the mechanism in place.
9. Close the cartridge access door.
Is the low ink message still displaying on the front panel of the printer?
If so, please proceed to the next step.
Step 2: Clean the cartridge contacts:
Find a clean, lint-free cloth (eyeglass wipes or coffee filters work well) that you can use to clean the cartridge contacts.
Press the Power button to turn on the printer, if it is not already on.
Place your fingers into the slot on the left side of the printer, and then pull to open the cartridge access door. The carriage moves to the left side of the printer. Wait until the carriage is idle and silent before you proceed.
Open the cartridge access door
1 - Slot for opening the cartridge access door
Push in on the front of the problem cartridge to release it, and then pull the cartridge toward you to remove it from its slot.
Remove the problem cartridge from its slot
With a clean, lint-free cloth (eyeglass wipes or coffee filters work well), wipe the copper-colored contact on the cartridge.
Copper-colored contact on the cartridge
Carefully reinsert the cartridge into its slot, and then push the cartridge forward until it clicks into place.
NOTE: Make sure that the colored dot on the cartridge label matches the colored dot on the carriage slot.
Insert the cartridge into its color-coded slot
Repeat these steps for the other cartridges, if necessary.
Close the cartridge access door.
Close the cartridge access door
Please let me know if the steps I've provided resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Officejet Pro 8610 printing envelopes from MS Word on MacBook Pro

I have Officejet Pro 8610 that will not print envelopes from MS Word envelopes. Print preview shows all white. I've played with as many settings as I can find. Yesterday, tech support got it to print from pdf, but today it doesn't even do that.
This question was solved.
View Solution.

I deleted the printer in Mac system preferences, reset, then reloaded the printer driver using officejet rather than airprint. Works OK. Thanks.

Officejet pro 8610 won't scan in color

I'm using a Mac OS 10.6.8 and just connected my new HP Officejet Pro 8610. It is only scanning in black and white. I do not see a place to select for color (when you select copy you have that choice but not on scan). It prints in color and makes color copies just fine. I also cannot see a place where I can tell it which folder on the computer to save scans to. Can you help me?

Hi @just1me ,
I'd like to help you be able to scan in color.
Did you download and install the Full Feature Software or run the Apple Updates?
Here is a document for Scanning with the Full Feature HP Software in OS X v10.10 Yosemite.
Try the Apple Software to see if you have the same results.
Here is a screen shot for where to change the color settings, scanning with the HP Scan Software.
After clicking scan, click on the drop down to get more options.
After showing the preview you can select the Edit icon at the bottom for more features.
To save the scan, select the Send Icon.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro 8610 (Network)' is offline every morning

I am running Windows 8. I use IE 11 and Chrome on occasion. Every morning I have trouble "waking up" my printer. I get "HP Officejet Pro 8610 (Network)' is offline". Sometimes turning the printer on and off resets it but today nothing seems to work. I even updated drivers. The rest of my network (excluding printer usage) is working fine. I have not been on a public network so that is not an issue nor has anyone else in our household. I need to correct this every morning problem. Really, any time the printer goes to sleep I have this issue. I'm unsure if I can stop it from going to sleep or not since I can't even see it from any of our computers. Someone please help. I've been dealing with this about a month. I had previously purchased an Epson printer similar and it now sits in a box in my office because of similiar annoying issues. I previously had HP all-in-ones for about 15 years with no problems. This one is starting to make me wonder about the declining quality of HP printers. Please help as soon as possible. My son has a paper due Tuesday and can't print it. Thanks

Hello , Welcome to the HP Forums! I understand your Officejet 8610 is offline every morning and it seems like this printer has trouble waking up. I will do my best to assist you! Please follow this entire HP document on What is Sleep Mode? You can try updating the firmware, which should help, since your printer is losing wireless connection when it goes to sleep: 1) Press the right arrow on your printer2) Press Setup (Wrench)3) Press Web Services4) Press Printer update and check for update now Make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference. Another option you have is setting up schedule on and off. This will help with the sleep mode, as you will determine what time you would like this printer to turn and off. Note-If you decided to go down this route, if you receive faxes all the time, schedule on/off might not be a good idea. If you set a time frame when this printer is supposed to turn off, then you will not receive a fax. Also, if ePrint is enabled, this feature will not work. 1) Press the setup menu (Wrench)2) Press power management3) Press Schedule On Yes and set the time frame4) Press Schedule Off Yes and set the time frame I just want to make sure that your printer isn't going offline because of your router, not by the sleep mode. Just in case, I will provide an HP document on Printer Does Not Maintain Wireless Connection. This will allow you to set a static IP address. Please post your results, as I will be looking forward to hearing from you. Have a great night!

HP Officejet Pro 8610 e-All-in-One Printer server 2003 - 32 bit

How can we install the drivers for HP Officejet Pro 8610 e-All-in-One Printer on MS Server 2003, 32bit?
The available driver list includes Server 2003 32 bit as an acceptable OS but when I try to install, the installation routine says that it is not compatible. Thank you for your interest in my question

Hi soeasy, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial issue. You can do this at HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet pro 8610 not connected

I have a new modem and separete Duel Router. Router is Lynksis EA3500 with 2.4 Ghz and 5 Ghz capabilities. Just bought a new HP Officejet Pro 8610 which I now have learned will only run on a 2.4 GHz system. When I connect the printer to the wireless system it shuts down the 5 GHz network. It kicks off all other devices. Those devices can join the 2.4 GHz, but can no longer even see the 5.0 GHz network. Not acceptable.
Do I need a different printer or can this be fixed? I don't understand why the printer won't run on the 2.4 but allow the laptops, desktop and TVs use the 5 GHz. Ridiculous.
I spent 1.5 hours on the phone with Lynksis first and they verified that the router is working perfectly. Then I spent 2 hours talking to HP in India and they just said sorry we will tell HP to make this printer capable for 5.0 in the future.
Not good - ready to return the printer. Any other option???
This question was solved.
View Solution.

First, I'm glad to hear the problem is solved. It also points out a significant problem with third had troubleshooting.
It also reminds me of a time when I was trying to help a customer over the phone (long before we could remotely login to client computers.) I spent a hour or so with this customer trying to figure out the answer to her problem. I eventually jumped in my car and drove over to the customer's office. In the middle of the screen was a big message that answered the problem. When I asked the customer why she didn't tell me about the message, she replied that she didn't believe that it was relavant.
I am surprised that HP even had you change the bandwidth on the router. The defaults nearly always work fine. 802.11 AC uses a wider bandwith than 802.11 G or N. The thing is, the bandwith change is all automatic.

HP Officejet Pro 8610 - Error Code: " 0xc19a0013" (missing or failed printhead)

I purchased the printer (HP Officejet Pro 8610 e-All-in-one printer) in January, 2015. The printer functioned properly - copy, fax, and scan, until two days ago. Now, it does not print at all. Received an error code: "0xc19a0013" (Missing or Failed Printhead). An expanded version of the error code reads: "The Printhead appears to be missing, not detected, or incorrectly installed. Error Code: 0xc19a0013. The printer uses a removable printhead, HP Ink Cartridges 950 (black) and 951(cmy). I have used HP Support Troubleshooting recommendations: all software and firmware for this printer is installed; the HP ink cartridges are not low or empty; removed the ink cartridges from the printhead and reinstalled them.
There are multible steps in the troubleshooting recommendation, but I stopped at removing the printhead. Because of my technical inexperience, and there were too many ceveats (beware, caution, proper reinstallation, and etc.) with removing the printhead that could cause greater problems. So, I stopped at removing and cleaning the printhead. Also, used the HP Printer Scan Doctor for assistance. The tool for cleaning the printhead doesn't work. What troubles me most with the 0xc19a0013 error code is its explanation: The printhead appears to be missing, not detected, or incorrectly installed. I can use all the help I can get to understand what is going on with the error code that I have received, and how to resolve the malfunctioning printer.
This question was solved.
View Solution.

Contact HP technical support at 800-474-6836 for more options.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Country-language selector.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Hp officejet pro 8610 - Unable to connect to server

Hello. I bought a printer hp officejet pro 8610. I have a home worth router Zyxel Keenetik. My laptop and smartphone access to the Internet via a router (to access the Internet proxy server is not required). I set up the printer on a wireless connection. Configured to print from a laptop to a local network - this works fine. And now trying to set up ePrint, but faced with the problem - I can not run a web-service on the printer. The message - "Unable to connect to server". I downloaded from HP new version of firmware for the printer and installed it, but the problem remained.

Hi,
Try setting a manual public DNS as following and check if that may help:
Open the Network tab within the printer's web page.
Select IPv4 within the Wireless section.
Select a Manual IP, then click the Suggest an IP button and allow it a few moments.
Once the fields being updated, change the DNS section as following:
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4.
Apply and save the changes, then try enableing Web Services again and check for any difference.
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8610 Terminal Printing

Hi i have installed Hp Officejet Pro 8610 on the machine 1 (32bit arch) and want to remote desktop connect to another machine 2(also 32bit arch) , I remote desktop with both local resources enabling all local devices and resources. When im remoted in to machine 2 i can see the terminal printer renamed with hp officejet pro 8610 redirected but when i print the print doesnt seem to come through.
I Have installed the printer on both machines, they both running same OP which is 7
It Prints fine when connected to machine 1 but failes to print on redirected printer on machine 2 when remoted in.
Pls can anyone help me tx
Regards
AndrewR

Hi @PEDDLAR , and welcome to the HP Forums!
I see you are experiencing problems printing. I would like to assist!
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet pro 8610, wanting to print transparency

I have the HP Officejet Pro 8610 all in one printer, and want to attempt home screen printing some shirts for my 9 year old's hockey team. My friend lent me her YuDu home screen printing machine. I am needing to print the design on a transparency sheet. I have the transparency sheets here, but I am not seeing that option anywhere. I am very new to computers, and any help would be sincerely appreciated. Thank You

Hi there,
Yes, I believe you can - BUT, you need to make sure your transparencies are INKJET transparencies. I see from a search online that these are widely available....at Staples, Amazon, etc.
You should just be able to load the transparency in the tray (I would only load one at a time) and then when you go to print, you would selecting Printing Preferences (this can be different, depending on what software you are using) and then on the Paper/Quality tab, select Letter as the Paper Size (assuming they are standard letter-size transparencies) and then 'Transparency Film' as the Media Type.
I found this YouTube video that might be helpful - but please note that this is not created or sanctioned by HP. Just a video I came across while looking for more information.
Hope that helps!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

HP Officejet Pro 8610 e-all-in-one-printer

I really need to find an important fax confirmation and my fax log only shows the last 30 transactions. Same with the call history. Is there any way I can get more than the last 30 items.

Hello @TheVillage,
Welcome to the HP Support Forums!
I understand that you're attempting to retrieve an old fax from your HP Officejet Pro 8610 e-All-in-One Printer. Because this is a consumer level printer it does not store more than 30 faxes within the fax programming. Therefore, there is no way to retrieve that fax information. Going forward I would recommend configuring Fax to a Network Folder. This feature will allow you to receive faxes to a network folder on your computer and also print the faxes on the machine if you want to. If you ever misplace an important fax you can go into the network folder and manually print the faxes.
For additional information regarding Fax to Network Folder please click here. Please refer to pages 12-18 within the User Guide.
Should you require additional assistance with the Fax to Network Folder setup please let me know!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Officejet Pro 8610 Airprint worked, then no more

Similar Messages

Maybe you are looking for