OfficeJet Pro 8610 Not printing certain documents

My 8610 OfficeJet Pro is set up ALMOST perfectly. It prints almost all documents including email, word, website info, etc. HOWEVER, it will not print certain .pdf files and Word documents with Drawing Tools using within them. I have run every test & shows successul setup of wireless printer. I also did the HP Print & Scan troubleshoot in which the program found any problems & Fixed them. I did not hook up the Fax part of this system. Otherwise, all parts are working fine. However, in trying to get it to work I have disabled my Print from phone as well. It was working prior to trying to print a document with Drawing Tools & changing settings on the printer to try & get it to work. It is showing me it is connected but my phone is not recoginzing the printer. When I try & Print the document with the Drawing Tool within it, it sends it to the printer, and printer shows "Printing Report", But nothing happens.

Similar Messages

HP Officejet pro 8500a not printing black

HP Officejet pro 8500a not printing black, we put new cartridges in two times, we replaced the printer head. If I change the document to a blue color, it will print that.

Hi Martymartin,
Welcome to the HP Support forums. I gather that your Officejet Pro 8500a will not print black ink but will print blue ink.
I have included a document with trouble shooting steps to take to help resolve this issue. If the steps in your document don't resolve the issue please call our technical support at 1-800-474-6836 if you live in the USA/Canada region. If you live outside the USA/Canada region please click the link below to find the Technical Support number for your country/region.
Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
Hewlett Packard Technical Support
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Officejet Pro 8500A not printing from black cartridge

This happened in an instant-no warning. I have tried all known troubleshooting and have disconnected. The cartridge is one month old - no error messages.

Hello there! Welcome to the forums @Mickgogs ,
I would recommend scrolling up to my last message about the black ink not printing. I have posted a troubleshooting guide to help resolve the issue. If the steps don't help, call HP directly to see what your options are.
Re: HP Officejet Pro 8500A not printing from black cartridge
HP's contact info:
If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet pro 8610 not connected

I have a new modem and separete Duel Router. Router is Lynksis EA3500 with 2.4 Ghz and 5 Ghz capabilities. Just bought a new HP Officejet Pro 8610 which I now have learned will only run on a 2.4 GHz system. When I connect the printer to the wireless system it shuts down the 5 GHz network. It kicks off all other devices. Those devices can join the 2.4 GHz, but can no longer even see the 5.0 GHz network. Not acceptable.
Do I need a different printer or can this be fixed? I don't understand why the printer won't run on the 2.4 but allow the laptops, desktop and TVs use the 5 GHz. Ridiculous.
I spent 1.5 hours on the phone with Lynksis first and they verified that the router is working perfectly. Then I spent 2 hours talking to HP in India and they just said sorry we will tell HP to make this printer capable for 5.0 in the future.
Not good - ready to return the printer. Any other option???
This question was solved.
View Solution.

First, I'm glad to hear the problem is solved. It also points out a significant problem with third had troubleshooting.
It also reminds me of a time when I was trying to help a customer over the phone (long before we could remotely login to client computers.) I spent a hour or so with this customer trying to figure out the answer to her problem. I eventually jumped in my car and drove over to the customer's office. In the middle of the screen was a big message that answered the problem. When I asked the customer why she didn't tell me about the message, she replied that she didn't believe that it was relavant.
I am surprised that HP even had you change the bandwidth on the router. The defaults nearly always work fine. 802.11 AC uses a wider bandwith than 802.11 G or N. The thing is, the bandwith change is all automatic.

HP Officejet Pro 8610 Add Printer issue on Mac

I purchased the HP Officejet Pro 8610 and cannot get it successfully set up on my MacBook Pro (operating OS X 10.7.5). During the "Add Printer" phase, I receive the following error message: "The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software".
I've downloaded and completed the steps up to this point by using the link from install CD (HP-Officejet-Pro-8610_v12.32.0.dmg) and by downloading after unsuccessfully troubleshooting from the HP webite (HP-Officejet-Pro_8610_12.32.0-2.dmg).
Can you please assist in determing what my next step should be?

Hi,
First reboot your Mac, then click the Apple icon and select Software Update.
From the listed app store click the Store menu and then on Repload Page.
Be sure to install any listed HP or Apple update.
Once you are done, open Print & Scan and try adding the printer again.
May you see any difference?
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8610 Terminal Printing

Hi i have installed Hp Officejet Pro 8610 on the machine 1 (32bit arch) and want to remote desktop connect to another machine 2(also 32bit arch) , I remote desktop with both local resources enabling all local devices and resources. When im remoted in to machine 2 i can see the terminal printer renamed with hp officejet pro 8610 redirected but when i print the print doesnt seem to come through.
I Have installed the printer on both machines, they both running same OP which is 7
It Prints fine when connected to machine 1 but failes to print on redirected printer on machine 2 when remoted in.
Pls can anyone help me tx
Regards
AndrewR

Hi @PEDDLAR , and welcome to the HP Forums!
I see you are experiencing problems printing. I would like to assist!
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP officejet pro 8100 not printing documents when asked, and slow to respond.

My Officejet Pro 8100 has allways been used wireless. It allways had a lag when asked to print and producing the document. Often the unable to connect to printer message comes up, then shortly latter it started to print.
We have now switched to Vergin Media ISP. The printere was set up to the new network as before no problem. The router is lacated downstairs by by our TV where the cable enters the house. Our 2 pc's are now wireless due to this (one windows XP and one Windows 7). Then there's Ipads etc.
Conectivity is not a problem the pcs are located in our study with the printer upstairs. My Ipad works in the Garden so theres plenty of range. All devices are on the same conection.
The problem with slow printing is now worse. Ask to print and often nothing happens. Switch printer off/on and it may print the last comand of not. It may accept the next command to print or not. Indescrimnently it may print 'misssed prints' at any time.
Basically it cannot be relied on to print when asked to, really frustrating!! The printers wireless indicator is lit its conected to the network. Any ideas as this is a real pain. Remote printing from a phone is a no go as it probably wont happen.
We need to print and it happen.

Hello @Ants9,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the slow printing issue that you're experiencing with your networked HP Officejet Pro 8100 ePrinter from your Windows computers and other devices. I understand that this issue began with your original router and now is occuring with your new network. I am going to run you through some troubleshooting steps below to resolve this issue.
Step 1: Run Print and Scan Doctor:
To verify that your printer is properly detected on your Windows XP and Windows 7 computers I would like you to download and run the HP Print and Scan Doctor Tool. This Tool will run on your computers and 'fix printing' issues for you. Should any driver, connection, or software conflict be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you.
Please click here to download the HP Print and Scan Doctor Tool. Please download this Tool on your Windows XP and Windows 7 computers.
Once the Tool has completed, please test printing again. Should the issue persist, please proceed to the next step.
Step 2: Powercycle Network:
First, unplug the power cable to your Router
Once your Router is unplugged, turn off your printer
Next, shut down your computer
After 30 seconds to 1 minutes, plug your Router back in
Next, turn on your printer
Turn on the computer
After a few minutes the internet connection will return. Please check on your Windows computers and ensure that you're able to browse to websites before continuing. Once the network is up and running again please test printing to check the printing speeds.
Should the issue persist, please proceed to the next step.
Step 3: Update Firmware:
There is chance that corrupted programming in your printer could be causing the slow printing issue. Therefore, I am going to have you update the Firmware Version on your printer.
Please click here to download the latest programming on your printer. Once the website opens select the Download button on the top left. Follow any onscreen instructions to send the Firmware Update to the printer. This update can be run from either the Windows XP or Windows 7 computers.
Please test printing again to verify if everything is now working as it should be.
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

OfficeJet Pro L7680 not printing the colour red: it comes out as brown

Running Windows XP. OfficeJet Pro L7680. Using HP inks + quality paper.
Model number CB038a
The colour red is printed as a distinct brown. All other colours/shades/tints/alignments etc are absolutely fine.
Have done the obvious: changed cartridges for brand new ones.
Cleaned printheads
Dignostic page: suggests all ok (good printhead health)
The actual quality of print is good in all respects on the test patterns other than the colour red is printed as brown.
Help gratefully received.
I've always used HP printers and this is a new one on me!

Hi wafflycat, if you reckon it's a cartridge issue then best bet is to contact HP phone support for a replacement....
Phone No.s
http://welcome.hp.com/country/us/en/wwcontact_us.html
Cartridge Warranty
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00206040
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HP Officejet Pro 8100 not printing from PC

Have a HP Officejet Pro 8100, suddenly stopped printing from PC, noticed base shaped symbol showing up above ink display, on/off button also is flashing when print is requested, checked printer status stating there is an error. Using Microsoft office 2010

Hello,
Please try the below steps..
While the printer is ON, unplug the power cord from back of the printer.
Wait for 30 seconds.
Plug in the power cord to the printer.
Wait for the printer to go silent.
Remove and re-insert the ink cartridges.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Officejet Pro 8100 - Not Printing

New HP Officejet Pro 8100 - driver installed for wireless network printing.
Printed Test Results - "No Problems Found....successful setup of your wireless printer".
However, when I try to print I can see the request in the print screen, but it says "Print file was not accepted". This is happening from the computer the driver was installed on (Mac OS X Ver 10.8.4.
When I try from another iOS device, I can see the printer, and can request the print job, It says its sending to the printer, but the job never shows up in the print que and doesn't print.
Help!!

What router? Have you restarted it?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

OfficeJet pro 8600 not printing for USB attached WIn7

I have an OfficeJet Pro 8600 Attached to Win 7 Dell with USB cable. It scans very well but most of the time when you go to print, it thinks the USB device has timed out and it gives me garbage about where to send a fax to?
I have other computers runing XP that are Wireless devices, and they take longer but print every time something is sent to them.
This connection is 3' away and the printer default & only printer for Win 7 machine. Under printers and devices it always sees the printer.

Try to run the Print and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03275041
Also, see if you can get another USB cable. Let me know the results.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Adobe Pro - will not print word documents to pdf.. keeps crashing

Hello,
I have Acrobat Pro and when I try to print Word documents it says printing... and then crashes. The window to select the name of the pdf to print to never pops up. The Word program crashes and reopens. The print icon appears on the system tray and just says spooling.
I am using Word 07.
Acrobat Pro was working fine to print PDF's on this version of word for a few months then for some reason it just stopped.
When I print PDF's from existing PDF's it works fine.
I have tried to repair the program but it did not help.
Any ideas?
Thanks,
Miguel

If you are having problems creating a PDF, there are two steps you should do FIRST
Go to the appropriate vendor web site and apply all updates to the program you are using (several recent messages have concerned problems with MS Office conversion, with the response that different versions of Office have different BUGS that must be fixed by a download from Microsoft - and MS Office products are not the only ones which may, from time to time, need to be updated to work properly)
Apply all updates IN NUMBER ORDER
Acrobat Update http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

HP Officejet Pro 8610 saying "printer not connected" after trying everything I can think of...

The printer worked before. It's working when we print from other devices. I tried updating my OS, no luck. I tried canceling the jobs and restarting, no luck. Tried restarting the computer, no luck. Tried deleting the printer from my computer and now adding it back and that's not working either. The printer deleted and now the computer can't find it again. Can someone please help? This is deeply frustrating.

Hello @ElizabethPaul , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing connectivity issues. I would like to help!
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd also suggest this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My HP L7780 all-in-one officejet pro will not print when inserting an original on the screen.

When I insert an original document on the copy screen, an error msg appears "original loaded" please re-load and try again. The printer functions properly from the auto feed and from computer commands. How do I remove "Original Loaded" from the printer screen so it operates correctly?

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue, specifically the Print Diagnostic Utility.
It may also help to reset the printer as described here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP OfficeJet Pro 8610 Always Prints in Landscape (OSX)

My HP 8610 runs on a Mac OSX and I cannot figure out how to get it to print in a portrait format. It ALWAYS prints in landscape. I've looked through every setting, etc., has to be something easy. I tend to use the Firefox browser when printing.
Thanks!

Hello FloralChutney,
Welcome to the HP Forums.
To change the lay out or the pint job, please refer to the screen shot that I have provided.
If you have any other questions, please feel free to write me back at any time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

OfficeJet Pro 8610 Not printing certain documents

Similar Messages

Maybe you are looking for