Officejet Pro 8610: Will not Auto Answer

Evening all. We just purchased two HP Officejet Pro 8610's and have set them up at the office, however, we have noticed that even though we have the Auto Answer feature enabled, neither machine is automatically answering. Instead they are still requiring a manual "yes, go ahead and answer that" button press which does not work for us as we often do not have people around those machines.
In running a Fax Test Report I got the following print-out...
Fax Hardware Test: PASS
Fax Connected to Active Telephone Wall Jack: PASS
Phone Cord Connected to Correct Port on Fax: PASS
Using Correct Type of Phone Cord with Fax: PASS
Dial Tone Detection: PASS
Fax Line Condition Test: PASS
Language: English
Country/Region: USA
Auto Answer: On
Rings to Answer: 2
Fax Paper Size: Letter
Tone or Pulse Dialing: Tone Dialing
Fax Sound Volume: Soft
Distinctive Ring: Single Rings
Busy Redial: Redial
No Answer Redial: No Redial
Automatic Reduction: On
Backup Fax Reception: On
Error Correction Mode: On
Fax Speed: Medium (14400)
Fax Forwarding: Off
Communication Error Redial: Redial
Our header and number have also been set. At this time I am assuming I missed something in the User's Manual, since this is happening with both machines. Might someone know of what I missed?
This question was solved.
View Solution.

Hi RandyT9,
I believe it is related to distintive ring setting. Have you tried to set the Distinctive Ring feature to All Rings and see if the printer can answer it automatically?
If you using distintive ring service, please refer to User manual on the distinctive ring setting.
If you are not using a distinctive ring service, check to make sure that the Distinctive Ring
feature on the printer is set to All Rings.
Hope this may helps.
Regards,
Although I am an HP employee, I am speaking for myself and not for HP.
Let others know this reply was helpful by accepting this solution. You can also show your appreciation by giving kudos.

Similar Messages

HP Officejet Pro 8610 Will Not Print

I have a new Officejet Pro 8610 which has been working fine but today it would not print. Everyting else still worked, the printer is detected by USB and all of the cleaning/ alignment procedures work from my PC as normal. Scaning a document worked OK as well. I tried to run a test print from the printer list on windows, this didn't work either. So I uninstalled the supplied software and reinstalled it again, still would not print. At this point I installed the software on my old laptop and connected if by USB again and it worked fine, printed straight away. The only difference in the install was when selecting which additional programmes to install, one said it was already installed even though I had unistalled the software before. That programme was the Product Improvement Study which I can't get rid of. Everytime it is still there. Is this causing my problems and how do I get it off my PC as I am unable to find it anywhere to remove it. Any help would be appreciated.

no one answered this questio for me or even gave me advice....
I got it to print from explorer but not chrome .So for some reason it decided to stop printing from chrome all on its on.Not sure how long it ill print from ie but we'll see .thanks for no advice

HP Officejet Pro 8610 will not install on Windows 2003 Server 32 bit.

When installing the 8610 with the disk, at the end it states and error occurred during the installation of the device. The specified module could not be found.
When I install using the downloaded drivers, after the files extract and the program connects to the printer, when I hit Continue a screen pops up and states the operating system of this computer is not supported... even though the 2003 Windows server is on the list. Is there anything I can do to install the drivers? All I need is basic printing . I'm about ready to pack it up and return it... which means the other printers will have to be returned because I like them all to be the same.
Please help.

Hi,
Follow the steps below to install the software using an MSIEXEC command, the installation should not be done using the installer as any clieant operating system.
The steps below are also applicable for installing the 8610 on a server OS:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03351547&lc=en&product=5367608&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode. The sender receives an error "no answer".
When I call the fax number, if I touch the screen it will wake up immediately to receive the fax.
Printing from the computer while in sleep mode works fine.
Please advise. Im missing important faxes and can only set sleep mode to a maximum of 15 mins, so I have an alarm set to touch my machine every 15 mins. sigh...
Thank you,

Hi Willia,
Welcome to the HP Support Forums! I see when your HP Officejet Pro 8625 enters sleep mode, you are unable to receive any incoming faxes. The senders will receive a 'no answer' error. I understand your printer will wake up from sleep mode if you send a print job.
First let's go ahead and make sure the OJ 8625 is plugged directly into a wall outlet, using a power bar or surge protector can cause the printer to lose basic functionality over time. To get a better understanding take a look here: Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
Now, I would like you to update your printers Firmware, click on the link below and follow the on screen instructions:
HP Officejet Pro 8620/8625 Firmware Update
Are you now able to receive incoming faxes when the OJ 8625 is in sleep mode? If not, I would like you to contact our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Paper drawer on Officejet Pro 8600 will not close

The paper drawer on the printer will not close. It goes in approximately one inch and is blocked by something at that point even though I cannot see or feel anything strange.

Hi @connied46,
Welcome to the HP Forums!
I noticed that the paper drawer on Officejet Pro 8600 will not close. I am sorry to hear this, but happy to help!
Please see this post, Re: Officejet Pro 8600 Plus ...paper TRAY wont close all the way? By my colleague @Gemini02.
If the post does not help, please call our phone support at 800-474-6836 to get your printer serviced. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best of luck!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Office Jet Pro 8610 will not print but will only fax

We have a HP Office Pro Jet 8610 and it worked fine until we hooked it up as a fax machine also on Thursday.
It used to copy, print, scan perfectly but we need a new fax machine so we went out and bought the phone cord and hooked up a fax line and telephone with built in answering to the Office Jet and the fax works , but now it will not print a document from Open Office to the printer because it tries to make a fax cover page.
I have run out of ideas can you please help?
This question was solved.
View Solution.

There are two "printer" drivers on there, to print, choose the "Officejet Pro 8610 Printer" instead of the "Officejet Pro 8610 FAX". You probably set the second one as default when the fax function is added, which is for PC fax. If you use the print function more often than fax, make the non-fax one the default printer.

Hp officejet pro 8610 wireless not connecting to my laptop

I have connected my HP Officejet Pro 8610 to my wireless network to my laptop But when I go to install drivers wirelessly, I get connection failed. 1. download: HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers2. use Use HP Download and Install Assistant (Recommended)3. click install from download assistant4. Extracts5. turn on printer6. Get pop up window with 3 sequences 1. prepare... sucessful 2. connnect (wirelessly) click continue7. Printer Setup & software: click convert to USB connected printer to wireless8. Network setup: identifies my wireless network9. select yes for "So you want to continue to use your printer on this wireless network?"10. Unsuccessful network Instalation. Disabled fwwent through router configures enabling channel 11.Still failsRan hpscan dr. goes through it's steps, goes to d/l install. click install says extracting, finishes (but doesn't say anything and goes away).And nothing happens. So basically went through the HP troubleshooting and they don't work. Please helpThanks, Frustrated... PS please move this to the appropriate forum, thanks

,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.

Hp officejet pro 8610 | does not print and cannot connect it wireless

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

Officejet pro 8625 will not print

Just purchased this printer. Scanning, faxing, email to printer all works fine. When I try to print any document it spools then deletes the print job as if done but doesn't print. I have uninstalled/reinstalled, run the diagnostic test and nothing is fixing it. Very frustrating and on the verge of returning the printer to Costco!

Hello , Welcome to the HP Support Forums!
I understand that you're not able to print from your Windows Vista computer to your HP Officejet Pro 8625 e-All-in-One Printer. I would like to assist you today with resolving this printing issue. Because you are able to scan from your computer I do not believe that the issue that you're experiencing is connectivity or software related. Rather, it does sound like a driver conflict is occuring between your Windows computer and your printer. To confirm if this is the case, can I please have you follow the steps below to install an alternate print driver on your HP Officejet. You will not lose any functions by utilising this alternate driver. Step 1: Clear Temp Files: Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 2: Load Alternate Driver: Please click here to download the Officejet driverOnce the download is complete you may get a prompt to Run the download. If you see the Run prompt, please allow it to Run.An extraction should now occur. Once the extraction is complete an installation window may pop open. Please close any install windows. You do not want to run an installation.Next, click on your Start menu. In the 'search programs and files' box type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. It should include files that say OJ860At the top of this folder you will see a file path bar. It may show something like 'Computer- Local Disk C - Users - AppData - Local - Temp - 7z . . . ' Left click on the right hand side of this file path bar at the top. The file path should now highlight.Right click on the highlighted file path and select CopyClose the Temp folderClick on your Start menuSelect Devices and PrintersRight click on your HP Officejet Pro 8625 e-All-in-One
Left click on Printer PropertiesLeft click on the Advanced tabLeft click on New DriverWhen the New Driver window opens please hit 'Next' until you see a list of Manufacturers and PrintersClick on the 'Have Disk' button on the bottom rightWhen the 'Install from Disk' window opens, simply right click on the file path bar and 'Paste' in the file path we previously copied.Click OKWhen prompted choose the HP Officejet 8600 Printer and click 'Next' until the Add Driver window closesUnder Printer Properties select Apply, but don't hit OKSelect the General tabRename your printer back to HP Officejet Pro 8625 e-All-in-One
Hit OK Now that the alternate Officejet driver has been loaded, please test printing to confirm if the printing issue has been resolved. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

HP Officejet Pro 8610 does not connect to laptop via wireless network

I have a new HP Officejet Pro 8610. It is connected wirelessly to my home network. My laptop, running Windows 7, is connected to the same network, but cannot find the printer. I have tried turning everything off and resetting the router, but still have the same issue - my laptop cannot find the printer.
I am able to email a document from my laptop to the printer using the printer's email address.
What can I do to get my laptop to find the printer on the wireless network?

Hey!
This is an issue with your wireless, you either have to get your router looked at you are looking at relocating your printer and your router so they are closer together. If you are able to connect all of your devices to the network fine when you are in the same room; Call HP Technical Phone Support.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
I worked for HP.

HP Officejet Pro K5400 - will NOT print on both sides

I recently built a new computer and everything is working great, EXCEPT one thing...when trying to print on both sides using Google Chrome, Microsoft Word, or another program it gives me the error message below. My previous computer had Windows 7 installed as well and my HP Officejet Pro K5400 had no problems printing on both sides of the paper. I tried using the Starter CD that came with my printer, but unfortunately since it wasn't for Windows 7 (only for Windows XP and Windows Vista) it will not install it. I also went to HP's website to downloaded the latest drivers. I was able to download them, but it hasn't fixed my problem. By the way, I do have a duplex unit on my prtiner (in case you're wondering). I'm not sure if my duplex unit still works, or if it's something else. If there are any solutions that you can give to fix this problem, I would be very appreciative. The error message is below:
Automatic Two-Sided Printing Module Missing
The document has been configured to print using the Automatic Two-Sided Printing Module but the module is not installed in the device.
The document will be printed one-sided.

Hi,
First remove and re-0attach the duplex accessory at the bak of the printer to enure it is well seated:
http://support.hp.com/us-en/document/c00845167/
Next ensure the duplex unit is set as installed within the print driver by entering the Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now try printing on both sides and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet pro 8600 will not connect to wireless network

I have an new Officejet Pro 8600 that I am trying to set up. I have run the the wireless network setup wizard multiple times. It recognizes the wireless network router asks for the WEP code and then thinks for about 5 minutes before returning a message: "Unable to connect to the network"
The wireless network test results suggestes that MAC address filtering may be the problem. There is no MAC filtering function activated on our wireless router.
The wireless router is a Verizon Actiontec MI424-WR 802.11 b & n
We have computers running both Windows XP and MAC OS X.
One of the reasons that we purchased this printer is for the wireless capabilities. If it will not conect to the web then it may be going back.

Hello,
Based on the provided details, I believe the issue have something to do with the wireless security settings of your router.
Please follow the steps below to access the Advanced Security Settings:
http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/ActiontecMI424/125511.htm
Below you will see the Network Authentication settings.
Select either Open System Authentication or Both.
Shared Key Authentication is not supported by the printer, and i believe this might be the cause for the connection failure.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP OfficeJet Pro 8620 - Will Not Set Up on Desktop

I have connected a new OfficeJet Pro 8620 to my wireless network. All Apple devices (Mac, Ipad, Iphone) can see and print to the printer without a problem. My desktop computer (HP with a Cisco Router) sees the printer to be selected for installation when I attempt to add the printer. But, then says there is an "Installation Fail". Similarly, on the HP set up software, entering the IP address of the printer results in an error (claiming that its an incorrect address - - which it is not, as I can access it throught the web server).
Spent 1 1/2 hours with tech support, and no solution. Any and all thoughts would be greatly appreciated.

Hi @lebowich
It sounds like there is something on the computer blocking the installation. Please complete the following steps and let me know the outcome;
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
Image source
Download and run the HP Printer Install Wizard for Windows
I look forward to hearing from you and hope my recommendations are helpful
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet Pro L7590 will not print in black

I have an All in One Officejet Pro L7590. When I first got the printer 3 months ago, everything was printing perfectly. Now, out of nowhere, it will not print in black. It only prints in color. I have done all the aligning, printhead cleaning, changing cartridges, etc. I am at a loss as to what to do. Has anyone had this problem with this model? Can anyone help? Thank you.

Thank you so much for responding. After (3) HP printers all having the same difficulty and support not knowing what the problem was, (also many hours with Support) I determined it was the printheads also. The printheads don't seem to last very long and can be more costly than the printer itself if you have to keep replacing them. I changed over to a laser jet. No printheads needed. And I have not had any problems so far. Just need to replace the ink cartridges when they run out. I have the HP Color LaserJet CP1518ni.

HP Officejet Pro L7580-Will not print black ink after I have replaced cartridge.

I Have an Officejet Pro L7580. It worked fine until I replaced the black ink cartridge. After replacing it I cannot print in black. I printed 1 or 2 sheets when first replaced-then it stopped (only the black will not print). After a hard reset it printed 1 or 2 sheets then stopped (printing the black). The quality test page did not print any black and there were globs of black ink on the page. The color prints fine and it show a full black cartridge. Followed multiple troubleshooting steps, to no avail.

Hi melissaccss,
I see you have replaced a cartridge and can no longer print black ink. I appreciate the troubleshooting you have done so far, but please take a look at the following document to see if you have done all that can be done; Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c01957673.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet Pro 8610: Will not Auto Answer

Similar Messages

Maybe you are looking for