Officejet Pro L7555 Hangs when printing,windows error msg - APPCRASH,spoolsv.exe

I have an OfficeJet Pro L7555 all in one printer.
I have tried and the same result on 2 different computers.I have reinstalled the entire software on one of the computers - result is still the same.
I just scanned a page to a pdf file and it did that ok.
What happens is:
1) i click to print and the job get sent to the printer,it starts to print and somewhere on the first page is halts sometimes with the page partly out of the chute where a completely printed page would land.I just tried to print 1 page and it did not print that page but a page that i was trying to print last night.Last night i switched the Printer off and also pulled the power plug out.
2) it then usually tries to print the other pages,halts along the way and starts again,and the last time, it did not even print all of the whole page,and i can also get blank pages.
3) and i get a Windows popup error box that says APPCRASH and the application is spoolsv.exe, i think,and options to find a solution online or to close
The printer is about 2 yrs old and i do not use it very much,so i dont think it is wear and tear and worn out parts,but is there something that needs replacing that is routine? But I am suspecting a memory problem on the printer though.Is this possible?? as it has printed a page that i was trying to print last night and it did it twice instead of printing 2 different pages and i suspect it is having a problem with the memory of what to print.
Thanks for any help in advance

Added Info for original posting:
Windows 8.1 64 bit OS. Dell box shipped with Windows 8 and upgraded to 8.1 via the Windows store. As stated in original post, computer is Dell XPS 8700, I7 cpu with 16 gbs of RAM.
Happy to answer any more specific questions.
Richard

Similar Messages

Officejet Pro L7555..grabbing print roller crumbling paper at feed then jams! HELP!

I have an Officejet Pro L 7555 and the grab roller in the right rear of the paper feed tray is grabbing and pulling the paper to the right and crunching it and causing a paper jam every time now for past 2 weeks. I have followed the online instructions and pulled the duplexer and cleaned the rollers I can get access to. But I cannot find any grab rollers anywhere?? So I went into the papertray with a flashlight and see one grey roller that drops down to feed the paper and that is exactly where it is pulling the paper to the right and crunching it and then it jams every time.
I need help trying to figure out if this is a fixable problem or if it is cheaper to buy a new printer???
HELP!!!
John [removed personally identifiable information]

Hi jjbrunoii,
Welcome to the HP Forums!
I see that you are unable to feed paper as it gets jammed with your HP Officejet Pro L7555, and I am happy to help you with this printing issue!
Please take a look through this guide. 'Paper Jam' Message Displays on the Control Panel or the Computer.
If you have done all the steps within that guide, then please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this answers your question, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8610 - Unable to print windows 8.1

Hi ,
I've recently purchased HP Officejet Pro 8610 and unable to print from windows.
I am running 64bit Windows 8.1
I can print from Web via email
I can print using the HP AiO Remote app in windows. This doesnt have full functionality and is also inconvenient if I am working on documents and I want to print.
I have tried the following:
- Uninstalling and reinstalling from CD provided with printer
- Using the HP printer troubleshooter assistant, no success
- Downloading the software direct from HP website
- Updating the firmware using OJP8610_R1416A.exe
-Changing the port to the network port (in this case it is 192.168.0.200, it responds to a ping, also set the printer to have a static ip)
This is the error message that i get when i try to print a test page when i choose printer properties in the control panel
"test page failed to print. would you like to view the printer troubleshooter for assistance"
I have trawlled through other member's issues and i cant seem to find a fix for myself
Please help
Appreciation in advanced

Hi @binhdai & @JFB2014
I would like to help you both the best I can, and I appreciate the troubleshooting efforts you have both made up to this point. Please try the steps below and let me know the outcome;
1. Uninstall the software - Uninstalling the Printer Software Instructions.
2. Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box.
3. Type in "spool" and press Enter or select OK.
4. Select and open the Drivers folder, select the x64 folder if you have a 64-bit Operating System or the w32 x 86 if you have a 32-bit Operating System.
5. Open the 3 folder, locate the HPBXPSRENDER.DLL file and rename it into HPBXPSRENDER.OLD
6. Reinstall the printer; HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
Fingers crossed
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet Pro 8500 A910 - when printing 3 pages, skips page 2.

Hi, I have looked on the online help, the printer itself and the print settings but cannot see how to get the printer to collate the pages correctly when printing double sided. At the moment 4 pages print correctly front and back on 2 pieces of paper, however when only 3 pages are needed it will print on page 1, then 3&4 double sided instead of page 1&2 Double sided and a single side on page 3.
Any help would be appreciated. We are an office of 5 people working on Mac OSX 10.7.5. Printer is:
Officejet Pro 8500 A910

Hey there Trubbs,
I have a few more steps in mind. Here they are in order I suggest them!
Mac OS X: How to reset the printing system
Repair disk permissions
Restart your Mac
Re-add the printer and test again
Hope that does the trick
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet Pro L7555 will not print

OS is Vista Home. The document gets hung up in the print que, and I have to reboot the computer to clear it, but it still won't print. I have checked hp.com/support, and I have the lastest software and drivers, I downloaded the Utility it recommended, and it says everything is fine. I checked the firmware, but my unit is not included in the Serial number range for the firmware that is available. The problem started a couple weeks ago and was intermittent. Not it won't work at all. Please help!!

is the printer connected by the USB cable? if yes, then unplug the cable, delete the printer icons and then plug it back in. then try printing.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Not printing black ink after new ink cartridge installed (HP Officejet Pro L7555)

I have an HP Officejet Pro L7555 on which I just replaced the black ink cartridge. Now it won't print in black at all. I have tried cleaning the printhead multiple times to no avail. I only get printouts of boxes in all colors except black and nothing else written on the page at the end of each printhead cleaning cycle.
When I print the Self Test Diagnostic Page, it comes out in Magenta instead of black. On this page, it shows that both printhead are in good condition. The ink level on the black ink cartridge is shown to be full as would be expected for a newly installed cartridge.
I have replaced other cartridges on this printer before, and have not had this issue. Could anyone please help?

Thanks, garytech1. I have seen the document.
Solution 1. I have used and am using only genuine HP cartridges. The one I recently replaced was black. I have replaced the other colors before without problems.
Solution 2. I am using the correct type of paper. There are no streaks on the printouts. Any printing I try from a document with black text comes out blank. The only two types of printouts I have obtained are:
a. The Self Test Diagnostic Page, which comes out in magenta and it has no streaks. It also lists the status of the printheads as being good.
b. The printout that follows a printhead cleaning that has all color boxes except black. There are no streaks here either.
Solution 3. I have checked the print settings (I have Windows XP SP3) and they are all correct.
Solution 4. I have printed the PQ Diagnostic page and it is all blank except for some colored boxes. There are no streaks in them. No grey boxes appear.
Solution 5. There is nothing wrong with the images or documents I am trying to print.
Solution 6. I don't see why I should have to spend $70+ to replace the black/yellow printhead when:
a. The yellow color comes out fine in the colored boxes
b. All the diagnostics (the ones that are in the installed software as well as the ones I obtained from the HP website) all show the condition of both printheads to be good, and
c. When all printing was working just fine before I replaced the cartridge. Is there a physical way to clean the printheads since it appears from all of the above that it is the genuine HP ink that may have actually plugged it up?
Thanks for your help!

AirPort Extreme does not see HP Printer Officejet Pro L7555

I have tried to research how configure AirPort Extreme with my HP Officejet Pro L7555 by USB or ethernet cable. After following instuctions, printer is not shown. HP site that Apple links me to says it works by usb. Apple is ambiguous as to if it must be airprint capable. Thought maybe I need to set it up in the address category. Can I get a definitive answer on the compatibility of this? The latest drivers etc.. have been installed. Any help much appreciated.

The HP Officejet Pro L7555 have three interface options:
USB
Ethernet
Bluetooth via an optional Bluetooth wireless adapter.
The USB port on the AirPort Extreme supports ONLY basic printer functions of a multifunction printer like your L7555. That means, you will not be able to access the printer's fax, scan, or copying function connected to this port. To gain access to all of the printer's functions you would need to have to connect it by Ethernet.
Once connected by Ethernet, the printer, not the AirPort Extreme, provides the print server function. Regardless, be sure to use the very latest print drivers for your Mac or PC.
HP provides a support article specifically for this printer when used with Mac here.

HP Officejet Pro 8500 won't print yellow. No error message. Cartridge not out of ink.

Printer won't print yellow. No error messages. Cartidge not out of ink, but did put in a new one and still won't print yellow.

Ok SLU87...here are some steps you can take that should help with your Officejet Pro 8500 A909g not printing yellow:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01980797&tmp_task=solveCategory&cc=us&dlc=en&la...
Let me know if it helps or not.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Officejet Pro 8600 will not print multiple copies

When I first set up my HP Officejet Pro 8600 I could print multiple copies. Not sure when, how, or why but I can no longer print more than one copy of any document at a time regardless if it is one page or 100 pages. I tried to update the drivers but the update failed as it said it could not uninstall the printer. When I did the error reporting it said there was no solution.
My OS is Window XP Home
The printer is connected via network.
I print mainly from MS Word 2010 and Adobe PDF files and I have the same issue from either program.
This question was solved.
View Solution.

Since the drivers and software refuses to update automatically, force it to. Uninstall all of the printer software and install it back using a fresh download. That will ensure that you have the latest driver and software for the printer installed and eliminate the need for updates for a while. I'll link them below. If that doesn't fix the problem with multiple documents not printing, try using an alternate driver for the printer. I'll link those instructions below. Let me know what happens.
HP Officejet Pro Full Feature Software and Driver
How to Assign Alternate Print Drivers in Different Versions of Windows
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My new HP officejet pro 6830 crashes when I connect to my Asus RT-N66U router

OfficeJet Pro 6830 crashes when connected to network (Asus RT-N66U router)
I've just taken delivery of an OfficeJet Pro 6830. I've installed the ink cartridges and it seems to be able to print copies and test pages, but I can't get it to connect to my network. Here's what I've tried:
Using the Wireless Setup Wizard
I selected my network from the list and entered my WPA key. It says it's trying to connect, then the following happens:
1. Briefly (for less than a second) a screen pops up showing that it has successfully connected to the network.
2. Briefly (for less than a second) the screen flashes blue with a "power" icon and the text "B8B2A4F8" (which I presume is an error code).
3. The screen display changes to "Printer Error: There is a problem with the printer. Turn the printer Off, then On."
4. After restarting the printer, it complains that it has not been shut down properly.
Any further attempts to connect yield the same results.
Ethernet connection
If I power the printer on while it is connected via an Ethernet cable to my network, after about 10 seconds it crashes as described above (steps 2 and 3) without me doing anything at all.
I did manage to get it to connect to a WiFi hotspot on my mobile phone (and I checked for firmware updates, but unfortunately there were none available), so it seems there's something about my network that the printer doesn't like. I have no idea what that could be, however. Does anyone have any ideas?

Hello Shawnondrums,
Welcome to the HP Forums.
I see that you are having an issue with the printer shutting down when attempting to connect to the wireless network.
A very important step that gets easily over looked is, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once the printer is back on, please use the on/off button to do a proper shut down and restart. This will also do a semi power reset on the printer.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Hp Officejet Pro 8600 Premium suddenly printed very slowly from PC

Hi, and thanks for any insights.
I have a client with an Officejet Pro 8600 Premium, and printing to this printer over USB has suddenly become very slow. The dedicated PC is XP with 2 GB of ram and only using 40 GB on a 200 GB drive. The printer has two trays, with tray1 dedicated to checks, and tray 2 for anything directed to plain paper. The printer is not connected to a network, but dedicatd to this PC. The PC is current with updates.
Checks print at the normal speed, and copying prints at reasonable speed, but whejn printed from the PC anything directed to tray 2 prints at a snail's pace . This is new behavior.
I have printed status pages and performed print head and allignment processes. Still, this behavior persists.
I looked i the event log and saw nothing that suggested an evident system issue. Windows update only shows Security Essentials updates for the duration during which the slowness started.
The PC is not acting strangly in any other way.
Any suggestion would be helpful.

Hi,
The information is very general, this applies for many HP printers:
Solution 1: Use a lower print quality setting
Solution: Check the print quality setting. Best and Maximum dpi provide the best quality but are slower than Normal or Draft. Draft provides the fastest print speed.
Cause: The print quality was set to a high setting. If this did not solve the issue, try the next solution.
Solution 2: Check the ink levels
Solution: Check the estimated ink levels in the ink cartridges. NOTE: Ink level alerts and indicators provide estimates for planning purposes only. When you receive a low on ink message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the ink cartridges until print quality becomes unacceptable.
CAUTION: Wait until you have a new ink cartridge available before removing the old ink cartridge. Do not leave the ink cartridge outside of the printer for an extended period of time. This can result in damage to both the printer and the ink cartridge.
For more information, see: Check the estimated ink levels
Cause: The ink cartridges might have insufficient ink. Printing with depleted cartridges slows the printer. If this did not solve the issue, try the next solution.
Solution 3: Contact HP support
Solution: Contact HP support for service. Go to: www.hp.com/go/customercare. This website provides information and utilities that can help you correct many common printer problems.
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: There was a problem with the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Officejet Pro 8600 Plus "unspecified printer problem"

I just set up my HP Officejet Pro 8600 Plus e-All-in-One. The set-up seemed to go okay, but when I go to the "devices" tab for "HP Connected" it has a yellow yield sign and says that I have a problem with my printer. When I click on the yield sign symbol, the box says that "An unspecified problem was reported. Please check your printer." When I check the printer pannel, there are no problems reported. The machine seems to print okay, but I'd like to clear up this error that is shown. Any ideas?
Also, I've already done the restart and sign-off/sign-in stuff, so we can move on to second-order trouble shooting. Thanks.
This question was solved.
View Solution.

HELP!
I am having exactly the same problem. I am simply swapping out an existing Deskjet 3512 that worked perfectly at all levels, so i KNOW i dont have router/port/network issues. eprint was and is flawless. I just plugged it back in to check and it still works just fine with eprint.
Using my new Pro8600, I send emails to my eprint address and they seem to go...and then nothing. they just don't print.
I get the"Officejet Pro 8600 Plus "unspecified printer problem"" message but my front panel reports no issues.
I'm a step away from taking this back and buying an Epson.
My experience with their support has bee stellar at a commercial printer level.
This seems to be a very common problem and I just dont have hours to monkey around with something that should work out of the box.
any help will be appreciated.

Officejet pro 8600 will not print card stock

I just purchased the Officejet Pro 8600 and cannot print card stock. I read another HP troubleshooting page and tried to run 100 copies of blank paper through to "calibrate" the printer as suggested by HP technical support. There was a suggestion to disconnect the tray 2 paper tray but I also don't a tray 2. Any suggestions? I print card stock regularly.

Hi breannemk,
Welcome to the HP Support Forums! I understand you are not able to print card stock on your HP OfficeJet 8600, can you please let me know the Exact model of 8600 you are using as well as the Operating system you are running. Do you get error messages when you try to print them, if yes, please let me know the error messages you run into?
Please reply back with the requested information so we can begin troubleshooting.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Officejet Pro 8620 won't print the "full pasted image"contained in a Word 2007 document

Just upgraded and installed for Officejet Pro 8620. Running with Windows 7, 64bitWhen printing a page that includes a image that was copy/ paste, using the snipping tool into the word document, it does not print the "full image". In print Preview the full image appears, but when it prints about 15% of the bottom edge and the right edge of the image is omitted. This was not a problem when printing from the Office jet 8600. It is not a problem of page width or length because text is printing just fine.We removed all prior printing software, and re-installed the new printing software, disabled the printer firewall, and problem still occurs.Please advise what other information is needed. Thanks.

Welcome to the HP Community @SandieKeith , I saw your message about the issues you are having when printing from MS Word. If the Print and Scan Doctor did not seem to help any, you can also try the steps and suggestions below! 1. Uninstalling the Printer Software from the Control Panel2. Restart the PC3. Reinstall the Full Feature Driver here: HP Officejet Pro 8620 e-All-in-One Printer4. Try printing from MS Word again5. If there are printing issues, try a Clean Boot and restart the PC6. Try printing again If the issue still continues after the above steps, check out the Microsoft Support sites for help with resolving the Word printing problem:How to troubleshoot printing problems in WordHow to troubleshoot print failures in Word

Constant Printing Restart on a networked HP Officejet Pro 8500 A909N Series printer

Hello,
I'm curious if anyone has run into this problem before. I have a HP Officejet Pro 8500 A909n Series printer that I have setup as a network printer. This has been accomplished through a print server.
I installed the printer's drivers based upon the cd that came with the printer, in the box.
The problem is that whenever a user prints, say it's a simply one page document... the printer will repeatedly print that single page until it runs out of paper. I have stopped/restarted the print spooler. I've rebooted the printer and the print server. I have deleted the drivers and readded them. I've tried installing drivers from HP's website and then installing those. I have attempted to delete the printer from the server and start from scratch.
When I monitor the print queue, I can see the service restart after each document prints. I can't figure out how to get this to stop.
Does anyone have a suggestion; or has anyone run into this problem? I'm not sure which forum to put this in. I chose the Networks/Wireless forum, even though this is running on a wired network with wireless disabled.
I certainly appreciate any asistance.
-Craig

It ended up being an issue with the port. I had used the same port as the last HP printer that I replaced. This printer needs to run on a TCP/IP port, and not an HP port.
Problem solved.
Oh, and it was wired, with wireless disabled.

Officejet Pro L7555 Hangs when printing,windows error msg - APPCRASH,spoolsv.exe

Similar Messages

Maybe you are looking for