OfficeJet Pro L7590 - wireless printer issue

Hi,
I have a 2008 OfficeJet Pro L7590 printer. I'm just now trying to get my printer to print wirelessly and I'm having multiple issues. I lost the disk for installation, but downloaded the installation via hp.com/support
After installing it, I tried to connect it wireslessly. On the final step, it says "
Unable to communicate with your printer. Not all diagnostic tests could be performed. Check cable connections and then retry."
I've checked all my cords and everything and they are plugged in correctly! BUT here's the thing. When I go to my start menu, and click control pannel → network and then click on a tab, such as "Network and Sharing Center, Connect to a Netowk, or set up a connection or nework. The window absolutely freezes and I'm not able to click on it at all. Also, I don't see a wireless conection icon on the bottom bar, right corner. (not sure what that's called) All i see are two computer screens and a red X ontop of them (icon)
I really need to connect my printer wirelessly, so I can use my phone, ipads and ipod touches! Please help. I've spent so many hours trying to figure this out!
HP doesn't offer me anymore help because it's out of warrenty

Hello iAliciaa.
I understand you are trying to installing your Officejet L7590 and you are receiving a message indicating "unable to communicate
with your printer". Are you connecting this printer Ethernet or wireless?
Please follow this entire HP document if you are connecting your printer using an Ethernet connection: Printer Is Not Found During Installation.
I understand completely what you are talking about, but could you verify what type of Operating System you have?
Click on this website to find out: Windows.
Look forward to hear from you.
Ashley
I worked on behalf of HP.

Similar Messages

  • Officejet Pro 8500 wireless printer says there's a paper jam. No jammed paper found. Windows Vista

    Officejet Pro 8500 wireless printer says there's a paper jam. Have followed all the steps suggested on HP site...No jammed paper found.  Using Windows Vista.
    Read on ablog that there are sometimes false "paper jam" notices.  Anyone else experience this problem?   

    1cairobeller,
    Here is a link to a post where someone else had the same issue as you. In this post is a video that will walk you through some steps to fix this issue.
    Hope this helps !
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/officejet-pro-8500-wireless-says-clear-...
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • HP Officejet Pro 8000 Wireless Printer: Still getting vertical white streak on copies

    HP Officejet Pro 8000 Wireless Printer: Still getting a vertical white streak down pictures. I have changed the yellow/black printhead. One helps note says I should try cleaning the scanner glass. Where is the scanner glass, and how do I get to it?
    Any other possible solutions for getting rid of the vertical line?  Thank you.
    This question was solved.
    View Solution.

    HI,
    THis looks like a issue with the printer itself as it indeed is a vertical mis. A cartridge issue would cause a horizontal issue. What you can tru is cleaning the carriage rod, the metal bar that you see in the printer, and carefully clean the transparant strip. Do this very carefully as its pretty delicate and if it breaks the unit is ready for trash.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Officejet Pro 8500a wireless printer hangs up when printing document.

    I have an officejet pro 8500a wireless printer and it has been working flawlessly.  Now all of a sudden it hangs up when sending a document to it.  It will say "now printing", with the red "x" and just sits there looking at me.  I have discovered that I can open the printer lid and close it and it will then print??????  
    Also when I click on "apps"on the printer menu screen,  it tells me, "unable to connect to the server".
    Anybody experience this problem??

    I too have this issue with my HP8500a Plus.
    I have managed to narrow down the issue to one of the cartridges. Whenever this cartridge is inside the printer, the issue will happen. If it's not, then the issue disappears!
    I have tested this discovery on TWO different hp8500a printers, and they both react to this "special" cartridge the same way: its presence inside the cartridge tray triggers the issue.
    There is only one thing that makes this cartridge any different form the other ones: even though it IS a genuine HP cartridge, it has been refilled and the max allowed page count has been hit. The issue started happening only after the max allowed page count has been hit.

  • HP Officejet Pro 8000 Wireless Printer - A809n.says it's out of ink but has new cartridge

    about 6 monhs ago the printer stopped printing stating it was a out of ink (black) after i replaced the cartridge it stopped again after about 10 days. i contacted HP and they basically told me to get a new printer. i decided to try a new cartridge again and reboot etc, etc. it still would work i use my other HP printer before looking to buy another. i read on the internet that this was a frequent problem with the HP Officejet Pro 8000 Wireless Printer - A809n. and it might be an printhead problem. i replaced the printhead and any low  or outdated ink cartridge. the printer worked perfectly for 4 weeks. now i am having the same problem. this sticks. it is leaving a bad taste . i have been a loyal HP user  i feel HP has made a questionable product and is not standing behind it.

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Windows 8 driver cannot find HP Officejet Pro L7590 ethernet printer on my new router

    I'm changing to a new router and had to change the IP address of my ethernet Officejet Pro L7590 from fixed assigned 192.168.1.7 into fixed assigned 192.168.2.168 (my new provider provided router doesn't support the 192.168.1.xx range). At installation my PC Driver cannot find my HP Officejet Pro L7590 ethernet printer, both not by it's search function, nor by giving the specific new IP address.  Browsing and login into the printer by adressing the new Static IP address works however fine: de printer is well attached. What do I wrong with at PC driver installation, any suggestions to have the printer coupled to the PC driver?
    Update: Connecting the printer directly to the router instead of via a switch solved  the problem!

    The Officejet Pro L7590 unfortunately will not be updated to support AirPrint. Check out my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0] thread for some other options.
    Just trying to help.
    Andrew

  • My Officejet Pro 8000 wireless printer prints to only 4x5" on 8x11 sheet when printing mult pages

    My Officejet Pro 8000 wireless prints to only 4x5 inches on the 8x11 sheet when I try to print multiple pages per sheet from an Adobe file.  The print preview shows the paper dimensions to be 8x11, and the four Adobe pages are properly scaled to fill the 8x11 printed sheet, yet when printing, all the printing is condensed to the upper left quarter of the sheet.

    What did it? I was still trying to figure it out

  • HP OfficeJet Pro L7590 network printer

    I just upgraded to v4.2.1 on my iPhone 4 and tried to use the new feature, AirPrint without success. My printer is linked using cat5 cable with my wired and wireless router and can be used with about 3-4 pcs within my family. I searched some articles and understand only a couple of HP printers can use this feature. How come Apple spend so much effort for a couple of printers of single company? I never imagined it becomes true. Did I misunderstand this feature? Thanks!

    The Officejet Pro L7590 unfortunately will not be updated to support AirPrint. Check out my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0] thread for some other options.
    Just trying to help.
    Andrew

  • Officejet Pro 8500 wireless printer

    How can printer be set to only print black and not color? 

    1cairobeller,
    Here is a link to a post where someone else had the same issue as you. In this post is a video that will walk you through some steps to fix this issue.
    Hope this helps !
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/officejet-pro-8500-wireless-says-clear-...
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • HP Officejet Pro 8500A Plus printing issues

    I have been having two new issues suddenly (within the past 2 weeks) with my HP Officejet Pro 8500A Plus. I am trying to print from my iMac 27 inch running OS.X 10.8.4 Both the mac and the printer are connected to a wireless network via an Xfinity Wireless Gateway. I have just replaced the ink cartridges in the printer but am unable to print black & white. In fact everything is comming out kinda pink. I have posted on HP's support site and was told to
    Download and install this: http://support.apple.com/kb/DL907
    Restart your Mac.
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
    Having done that initially my problem was solved. But now I'm having the problem again. I went through the above steps again, but still not able to print. Are there any suggestions for a fix. Is anyone else seen this issue? Is there a particular printer manufacturer that works well with Apple. Because at this point I have a large paperweight that is of no use to me!

    The fact that it was solved and then came back points to some (unknown) issue with your Mac's software.
    Try these generic fixes first (and then do the reset printing system and re-add again):
    http://support.apple.com/kb/ts1417
    (one of the three methods - I like Disk Utility best - you can also repair disk permissions while there.)

  • Windows 8.1 incompatab​ility with Officejet Pro 8600 wireless printer

    HP pavillion g-7 laptop running Windows 8.1. Trying to wirelessly print to HP Officejet Pro 8600. Spent and hour and a half with Al uninstalling, reinstalling updated driver (3/9/14). Also ran scan doctor from HP. Multiple resets, restarts and yada.......At the end he thanked me for my time and told me to complain to Microsoft because 8.1 would not communicate with the printer properly. Does anyone know of a fix for this? Thanks in advance.

    Hello sanpanchobob,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I saw your post about the issues you are having with your Officejet 8600 and Windows 8.1. Although I noticed you have done the majority of troubleshooting, I would like to recommend a Level 3 or Level 4 uninstall and then an install. See below for the details.
    The OJ 8600 is compatible with Windows 8.1: Windows Compatibility Center
    1. Type %temp% in the run field and click OK.
    2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC (important)
    6. When the uninstall has completed restart the computer
    7. Install the printer: HP Printer Install Wizard for Windows
    I hope this helps!
    Take care,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problem with Officejet Pro 8600 wireless printing

    HP Officejet Pro 8600 will no longer print wirelessly from laptop, but will from IPad and Android phone using Samsung and Google Print. Used to work fine. Unaware of any changes to settings in either printer or computer setup. Have gone thru all trouble shooting steps including rebooting computer, router, and printer. Computer is connected to internet and bluetooth is on and working. Computer finds the printer but says it's offline.  Printer settings say printer wireless is on and is connected to network but wireless light will not illuminate.
    As you can tell, I'm no expert. Experienced user, but not in wireless issues. Computer is Windows 8.1. I've read all the support info on this problem on the HP website and taken as many steps as looked appropriate (or I understood). Everything so far looks nominal except for the wireless light on the printer.
    Any thoughts?

    Well, I finally got it to work by resetting and rebooting everything, starting with the modem/router, then laptop, I-Pad, and Android phone. Wireless light on the printer doesn't seem to be an issue. My Att DSL line is spotty at best, giving the modem not much to work with. The interaction of all the elements is complex given the demands I put on them. I'm 75 and have owned so many computers and peripherals since 1982 that I've lost count of them. But they haven't gotten easier to work with. I should have taken training as a network administrator rather than real estate!

  • Planning on installing HP Officejet Pro 8000 Wireless Printer

        I have Cisco Network Magic Version 5.5.9195.0-pure0  (base installed on Windows XP (SP2) - ethernet cable connected to a new  Linksys router E2000.
         Cable connection (via Comcast) to the internet
        Will this HP printer be a good choice (has wireless and Ethernet connectivity) to use on my new home network
        Just installed the Linksys E2000 and the Cisco Network magic software.
        Do I need to install the HP Officejet Pro 800 pronter drivers on all PC / Laptops in my network (currently 3)
                 Thank you,
                           Len ........

    HI,
    THis looks like a issue with the printer itself as it indeed is a vertical mis. A cartridge issue would cause a horizontal issue. What you can tru is cleaning the carriage rod, the metal bar that you see in the printer, and carefully clean the transparant strip. Do this very carefully as its pretty delicate and if it breaks the unit is ready for trash.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Officejet Pro 8600 wireless print option with Mac OSX Snow Leopard?

    Hi My 'old' 8600 printer died and I purchased a new one. I did not set up wireless communication with the old printer but am interested in doing so with this new one, or at least having that option.
    I'm running Mac OS X 10.6.8  Snow Leopard. The installation CD that came with the new printer says it's for OS X v10.6, Lion or Mountain Lion. Is it compatible with my system?
    Thanks!

    Hello KelliMK, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are looking into compatibility information.  The Officejet Pro 8600 is compatible with Mac OS X 10.6.  The software disc should allow the full install without issue. 
    As for the wireless setup, I would recommend following this document on HP Officejet Pro 8600 All-in-One Printer Series - Installing the Printer Software on a Wireless or W...
    Please let me know if you have any questions.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Officejet Pro 8100 Wireless Connectivity Issue

    Hi, I've just purchased the HP Officejet Pro 8100 and have not been able to connect via wireless to the home network. I've tried connecting to 3 different routers and no success. Steps I took were as follows.
    Steps:
    1. Insert Driver CD
    2. Install HP Driver Software
    3. Follow on screen prompt for wireless connectivity
    4. Was prompted to connect USB cord temporarily
    5. Prompted to select SSID
    6. Prompted to enter WPA Security Key
    7. Screen saying your printer failed to join the following Wireless network.
    8. Humored myself and read all the troubleshoots. No good.
    9. Downloaded and Flashed new firmware to Printer. New Firmware installed. Still did not help.
    *One thing to note: On the Failure to connect to Wireless network Error on Step #7 it says something about MAC address filtering and to enable the above MAC address. The funny thing is there is no MAC address supplied above. The field is blank. All that aside, MAC address is disabled in the first place anyway. Just wondering why the printer software doesn't know the printers own MAC address.
    Attempted to setup printer on the following routers...
    Router #1
    Router: e4200
    Local IP: 10.0.0.1
    Subnet: 255.255.255.0
    DHCP Range: 10.0.0.10 to 10.0.0.59
    SSID: "Kosmos 2.4" and "Kosmos 5.0"       2.4ghz and 5ghz bands respectively
    Channel Width: 20mhz or 40mhz
    Wirless Mode: a/b/g/n
    Security Mode: WPA or WPA2 Mixed Mode
    Router #2
    Router: EA4500
    Similiar Setup as Router #1
    Router #3
    Router: 2wire 3801HGV
    Local IP: 192.168.1.254
    Subnet: 255.255.255.0
    DHCP Range: 192.168.1.64 to 192.168.1.253
    SSID: "u2"    *Eliminated Spaces in SSID
    Wirless Mode: b/g
    Security Mode: WPA2
    If anyone could shed some light that would be great. Otherwise I guess ill be returning it very soon.

    Now you know why you were unable to connect.
    Absolutely. It should be broadcasting  its own SSID.
    This link goes to a factory reset document for your printer.
    is your printer still in warranty?
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for

  • XML Data into table

    Hello Sorry, for the next question, but it doens't wort :-(... I want to insert this xmldata into a table: <?xml version="1.0" encoding="ISO-8859-1" standalone="no" ?> <aps:Operations xmlns:aps="Software" aps_version="V4.02-03.00" aps_versionl="40203

  • How do I clear Error 1311 when downloading Adobe Reader 11

    How do I clear Error 1311 when downloading Adobe Reader 11 ?  Cannot find missig file C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AB0000000001}\DATA1.CAB

  • Best Method in Dimension Building

    Hi All, Please advice me on the Best dimension Building Method( Parent child/Generation/ Level Methods) and also let me know when these dimension building methods can be used. I know this is a pretty simple question. But, I am still looking for bette

  • AQ message notification dispatch order

    Hi, My apologies if the answers to these questions are in the docs, but I cannot find them! I need to understand the order in which asynchronous notifications will arrive at a client, as it will be a large overhead to check whether a new message has

  • Moving photos and deleting

    I have some photos on my iPhone in the photo album. I moved them into a folder (2) and I want do delete them from the photo album (sorry if it made no sense) :)