Officejet Pro L7700 series

Acrobat software that came a software for the L7700 series does not scan full width of the original document.  Suspect that this software is Acrobat 5.  I had previously purchased and installed Acrobat 8 and used with  my HP 7400 series.  Is there any way to dump the software that came with the 7700 series and use Acrobat 8.
I have checked for software updates and there is none.
I would actually prefer to use HP PresisionScan Pro 3.02 that came with my HP 7400, but this software does not recognize the L7700 series.
Thanks
Gary

Hi,
Please click on the link bellow to solve the issue :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79353-2&cc=us&dlc=en&lc=en&...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

  • OfficeJet Pro L7700 Slow to print

    I have an HP OfficeJet Pro L7700 Series printer that is extremely slow at printing, and causing the print spooler service to pause or freeze for several minutes.
    - All the clients are running Windows 7 Professional 64-bit.
    - I have tested printing via an ethernet cable as well as wirelessly
    - I Have installed the latest driver from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=ca&dlc=en&sw_lang=&product=2512...
    Here's exactly what I am experiencing:
    When I click print test page the properties window of the printer freezes for 30 seconds to one minute. If I move the window around it says its not responding. Approximately 1 to 15 minutes later I receive a message that the print job has been successfully sent to the printer, and then the printer prints the page.
    I have attempted uninstalling and reinstalling the software and driver as well.
    Any thoughts/suggestions/comments are greatly appreciated.
    Adam

    Hi @VexedHPUser 
    Perhaps the Microsoft Fix it utility will help;
    What it fixes
    You are unable to install a printer, connect to a printer, or print more than one job at a time
    You receive an error indicating your Print Spooler service is experiencing problems
    You receive an error indicating your is not the default printer
    You receive an error indicating: cannot be contacted over the network
    Identify if your printer is turned off
    Identify if your printer toner is low or empty causing your print job to appear faint or it does not print at all
    Identify if your printer paper is low or empty
    Identify if the printer has a paper jam which is preventing it from operating normally
    Identify if a print job that is in the print queue is preventing other print jobs from printing
    Identify if you need to update your print driver
    You receive an error stating that your Plug and Play printer %PRINTERNAME% has encountered a driver problem
    If the issue persists, I think it might be a good idea to reach out to the Microsoft Community.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Hp officejet pro L7700 printer

    Hi,
    my printer (HP Officejet Pro L7700 Series) is connected via wireless router fro my laptop (windows 7). when i try printing it doe not print but it says the printer is offline. i've tried the troubleshooting through windows but it says the printer is off and to turn it on when it is already turned on.
    plase help if you can
    thanks
    kudo points for rewards

    Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Software Conflict between HP G4050 scanner and HP Officejet Pro L7700 all-in-one

    I have a Sony Vaio pc, OS Windows 7 HmEd 64-bit (updated), using Norton 360 (updated).
    My pc and a Mac are both connected wirelessly to the Officejet Pro L7700.  My pc is connected to the G4050 with a USB cable, as the G4050 does not have wireless capability.
    The conflict is: (I initially had L7700 installed on my pc, and all was well) After installing the G4050, all worked for a while, then I go to print/scan, and receive error message that neither machine can be found, (though both are installed).  So, will uninstall and reinstall one or both machines.  It works fine for a while then, then same thing.  I've uninstalled and reinstalled 5 times in a year.  There is a conflict with the sofware of the 2 machines.  All other software on my computer works fine, and if I'm using only one of the HP products all works fine - the conflict is the software for these 2 HP products TOGETHER.
    1. Is it possible to successfully use both of these machines installed on a pc?  
    2. Do I need a patch, or how can I make this work? 
    Currently, I just have the L7700 installed and working great, but very soon I need to (again) install the portable G4050 to scan negatives and prints.  
    Please help!  I love HP products.  How can I get these 2 to work together?  If not, what else can I do?
    Thank you in advance for a prompt response. 

    Hi , Welcome to the HP Forums! I see that you cannot get your HP Officejet Pro 8600, and HP Officejet Pro 6600 printers to work on Windows 10. And, I am happy to help!  According to this guide, Windows 10 Compatible Printers, both printers are compatible with Windows 10.  So we will need to do some troubleshooting steps in order to get them to work.  Some questions for you:  To verify both printers hardware is functioning standalone, are you able to make copies using the scanner glass? Copying a Multipage Original.Do you see any error messages on the computer screen or any of the printers display screens? In the meantime, please try the HP Print and Scan Doctor, and post the results! Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • I need an installation file for officejet pro 8000 series a809 printer

    I need an installation file for officejet pro 8000 series a809 printer

    Just search the web and you will find you answer.
    http://www.google.com/search?q=+officejet+pro+8000+series+a809+&sourceid=ie7&rls=com.microsoft:en-us...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Can't install the software for the HP Officejet Pro L7700 because it is not currently available from the Software Update server.

    Please help I can't get this software to load and now I cant use my printer

    Right I done this in the end
    Having spent 30mins with Apple Support this is what worked:
    Finder select GO, computer, MAC HD, Library, Printers, HP
    Dragged the HP folder to the desktop as a back up
    Dragged the HP folder to Trash
    Restart the mac
    Make sure HP printer plugged in via USB (not wireless)
    Apple logo , software update, selected the HP update (triggered by the fact that the cable is connected to the printer)
    Installed the 1 item
    Verify we could print with the wired connection to printer
    Disconnect USB cable
    System Pref , print and scan
    ( existing printer will show as red i.e. offline)
    Click on add
    There in the list was the wireless version of the new printer
    Tested it works wirelessly

  • Officejet pro L7700 with a quirk I can't get 3 pro's to figure out!

    You all are my last hope.  I have the above mentioned model.  I had it running for years just fine and then I switched networks.  It will print off the WIFI on my daughters windows laptop, but not from my Mac.  It used to just fine.  I had 3 printer/computer guys here and they can't find the trouble.  I can go and plug it in if I want to print, but I would like to have my wireless printer back.  I believe I have tried everything, but I am open for suggestions.
      Can anyone help me?????
    Mercy164

    Let's start by resetting the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Is the hp officejet pro L7700 able to use wireless direct printing?

    i am trying to set up a printer and for some reason cannot using all the usual suggestions as it is not recognized sin the installation set up.
    dah76

    Hi,
    Wold you like to setup similar to this ?
    If yes, please follow instructions from this book (Ch 5, page #19):
      http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Overriding ink expired notice on an Office jet pro L7700 series

    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01764161&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
    Indicates that  you can over ride by:
      following instructions on the printer, in the user manual, or in the ink cartridge expiration message on the computer screen.
    Can somebody be so kind as to provide the instructions or a link to them? I can't find them. A google search doesn't find them either.
    TIA

    Simple solution:
    I powered off the printer.
    Powered on.
    Got warning !
    You will be informed the world will cease to be as we've known it if you use expired ink.
    Click > button
    click on ok
    Print

  • OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

    Hello:  I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software.  I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
    I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.  
    I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it.  Any help is appreciated.
    Thanks,
    John

    Hi,
    It's an option during the installtion process. Please try the following Utility:
       http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Officejet Pro 8600 Plus

    Hello.
    I have the Officejet Pro 8600 Plus running on Windows 7. The printer is connected to computer by network and it is linked to the computer.
    All was well with the printer untill I removed Norton and installed McAfee two days ago. Now it will not work, even with McAfee turned off.
    I tried to uninstall and re install the printers programmes and driver, but it will not re install the programme or driver.
    I have uninstalled all HP prog's.
    Stopped all start up prog's except the Microsoft ones.
    Turned off McAfee
    Gone to HP and re installed the software and drivers.
    These downloaded fine (took a few minutes and 123.00 MB copied) and installed.
    Accepted HP licence terms and ran printer installation programme.
    Got instalation complete message.
    But it is not installing!  Where is it downloading the programme and driver to?
    Downloaded the HP Print and Scan Doctor. This finds printer and says programmes not installed. it then downloads them, but it never works. Even with McAfee firewall and scanning all turned off. If I then run it again, I get the same mesasage the programmes not installed, though it just seemed to do it....
    If I go to devices / printers there is no Officejet Pro icon like there was. If I try install new printer there, I does not find the correct drivers for this HP model.
    If I go to Start, all Programmes, HP and click on these icons I get message "Shortcut moved or changed"
    I am at whits end with this now. Absolutly hate the McAfee.
    Please help.  Nick
    PS.
    I have got the printer partly working by using the windows available driver HP Officejet Pro K8600 Series, but this is not the correct driver. It will not scan and has very limited printing functionality.
    Windows also shows a FAX - HP Officejet Pro 8600 driver, but this did not work when I tried it. Is this the proper driver for this printer??
    When I try to get windows to download new drivers it goes looking but says it is unavailable and to try again later.  :-(

    Hey there @Nick-S!
    Thank you for posting on the HP Forums!
    I can see that you are experiencing some software issues with the Officejet Pro 8600 after re-installing McAfee.  I would be happy to provide some suggestions that may help resolve the issue! 
    I suggest restoring the network defaults in the printer, power cycling the router and reconfiguring the printer on the wireless network.   To restore the network defaults press the Wi-Fi icon on the printer and go into settings.  Under settings should be an option to restore the network defaults.  Once the network defaults in the printer have been restored power cycle the printer and power cycle the router for 20 seconds.  When the printer turns back on press the Wi-Fi icon again, go back into settings and run the wireless setup wizard.
    I understand you have re-installed the software but the printer is still not recognised.  I recommend uninstalling the HP software one more time.  After the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
    To uninstall HP software click here: Uninstalling HP Software
    To perform a disk cleanup click here: Performing a Disk Cleanup
    To download the HP software click here: HP Officejet 8600 Plus Software and Driver
    Please post back and let me know how that goes!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Unable to scan from my HP OfficeJet Pro 8600 Plus to my Mac iOS 10.10

    Just purchased a new Mac and running Yosemite. Tried adding my 8600 and it prints but will not scan. When attempting to scan to computer, a message "The HP software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again." When I follow the link, it directs me to download the driver again.....and the cycle begins. I have tried completely uninstalling everything according to previous suggestions in the forum but nothing has helped. 
    I'm a new Mac user but just can't understand why this would work on my PC and not the new Mac. 
    This question was solved.
    View Solution.

    Hi castagmc,
    Welcome to the HP Forums.
    I see that you are having an issue when attempting to get the new Yosemite driver installed for the printer.
    I do have some suggestions that we can try in the attempt to troubleshoot this issue.
    First off, please remove the usb cable from the printer and from the Mac and leave it disconnected until further notice.
    I have a link that I am going to give you that gives detailed instruction for Uninstalling the Printer Software.
    Once the uninstall is complete, please restart the Mac to have the changes take affect.
    When the Mac is back up and running, disable any anti virus protection you may running. We do not want anything getting in the way when we reinstall.
    The next step is to download and install the HP Officejet Pro 8600 series Full Feature Software and Drivers.
    The installation will prompt you as to when to connect the usb cable so please do not connect it before hand.
    Please feel free to write me back if you have any other questions.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Paper jam issue on HP OfficeJet Pro X576DW

    My recently bought HP OfficeJet Pro X576DW displays and initiates a Paper Jam warning and holds printing subsequently. However, there is no "paper jammed".
    Seems like one of the sensors is confused.
    Is there a way to hard reset the printer, cause it is not working right now.

    Hope I can help you.
    First, please see if you can make sure you have the latest version of firmware on your printer. If you hit the "?" mark and then touch Printer Information, you'll see the FW Version as the last thing on the screen.
    The most current ends in 1336MR. If you have a number <1336, please update the FW.
    The easiest way to check for FW is to have the printer connected to web services. The small icon on the upper left is for Web Services and under that menu is to check for update.
    Then...
    Settings/Tools/Advanced Cleaning.
    Normally, this requires sending out of a cleaning pad by HP, however, try feeding a piece of card stock through tray 1. This may fix your paperjam.
    Let me know.
    HP Product Expert for the Officejet Pro X Series.
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!

  • HP OFFICEJET PRO x476dw/X57​6dw ink expiration​?

    Anyone know if the new officejet pro x476dw/x576dw series printers have expiration periods on their installed ink cartridges?
    I am considering the model as home office laser replacement.  My printing workload is unusall in that it is infrequently heavy.  I am after a durable device and this option provides a route away from toner dust and a cleaner home office environment.
    Thanks. 
    This question was solved.
    View Solution.

    The inks in this printer do not expire. Here is HP's official statement on ink 'expiration': Ink Expiration - none of the Officejet Pro X-series printers are listed. The date on the ink cartridge is the date the warranty ends. The printer will stop when an ink cartridge runs out of ink.
    I work on HP's behalf.

  • Officejet Pro 8600 Plus won't print or scan wirelessly using Mac OS 10.

    Mac OS 10.9
    Wireless
    My printer was working fine until today.  Then when I used the control panel to scan a page I went through the steps and got to scanning and got the message I needed to enable "Scan to Computer" in the HP Utility.  I went there and it was unchecked.  Seems I had this problem every time I did a new scan job in the past.  It wouldn't retain than check.  So I checked it and after awhile I got the message "Communication Error" and to check my connections and if that didn't work restart my computer and printer.  I did that and also restarted the router but it didn't help.
    Then I tried printing from Word, which has always worked but it didn't this time.  The printer icon on the right of the dock came up, bounced a few times then disappeared with nothing happening on the printer.
    So I deleted and reinstalled the printer.  No help.  I downloaded and installed HP software and firmware updates.  No help.  I went through wireless setup.  No help
    BTW, all along I got good "Wireless Network Test" results.  I says it's connected but nothing happens when I try any functions of the printer.
    If I can find a USB cable I will try to see if wired works.
    Any suggestions would be appreciated. 

    Hey @neoflyer,
    I would like to assist you today with resolving the wireless printing and scanning issues you're experiencing on your HP Officejet Pro 8600 Plus e-All-in-One Printer on your Mac OS X 10.9 Operating System. You mentioned that you have powercycled the devices, reran the wireless setup, and uninstalled and reinstalled the software and drivers to no avail. I'm going to suggest a few additional troubleshooting steps to verify if this is a computer issue or a network issue.
    Step 1: Gather the IP and Open the EWS:
    1. On the screen of your printer select the wireless button:
    2. Under the Wireless information you should see your IP address
    3. Open up your internet browser on your Mac computer and in the website address bar just type in your IP address. Please do not include www.
    4. After you enter your IP address in the website bar go to that website
    5. If the website for your printer opens than that proves with 100% certainty that your printer and computer are 'talking' to each other on your wireless network. If the website fails to open than you have a network communication issue with your router.
    If the website fails to open please powercycle your network again:
    How to Properly Powercycle a Network:
    First, unplug the power cable to your Router
    Once your Router is unplugged, turn off your printer
    Next, shut down your computer
    After 30 seconds to 1 minutes, plug your Router back in
    Next, turn on your printer
    Turn on the computer
    After a few moments check on your computer and ensure that the internet is working. Once it is, hit the wireless button again on the printer to see if your printer got a new IP address. Using the IP address enter it in the address bar of your internet browser and now see if the website for the printer opens.
    If the website for the printer opens successfully please follow the steps below:
    Step 1: Uninstall Drivers and Software:
    From the computer desktop, double-click the Macintosh HD, and then click Applications.
    Click the Hewlett-Packard folder.
    Double-click the HP Uninstaller, and then click Continue.
    Select the product to uninstall, and then click Uninstall.
    When prompted, type the Administrator name and Password, and then click OK.
    From the Macintosh HD menu, click Users.
    Click the correct user name.
    Click Library.
    Click Preferences.
    Click and hold the cursor on the first file that starts with "HP," and then drag the file to the Trash icon on the taskbar. Complete this step for each file that starts with "HP."
    Close out of Preferences.
    Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    1. Please click the following link to download the appropriate Mac OS X 10.9 drivers for your printer: Mac: HP Officejet Pro 8600 series Full Feature Software and Drivers
    2. Once downloaded, run through the step by step screens to reinstall your network printer
    3. Once the printer is reinstalled, attempt a print and a scan!
    Please let me know if these steps resolved your issue. Thanks for reaching out to the HP Support Forums. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Maybe you are looking for