Officejet pro mac ox garbled print

just started getting garbled print from my Mac OSX 10.9 , seems to print garbled several lines across the top of the page and various lines on the back of the page, sometimes random..have updated HP firmware and drivers and also updated the HP printer software today....still getting same results?
Thanks
Tim B

Hello there! Welcome to the forums @Tim854 !
I read your post about the garbled printing issue you're having with your Officejet 8610 and Mavericks. I have a few suggestions to offer you that should help.
In order, try these steps:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Install the full driver here: HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
In addition, download this driver: HP Printer Drivers v3.0 for OS X
Try printing again and let me know how it goes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Officejet Pro 8500A (A910) - garbled printing

Hi,
This problem has been going on now on and off for approximately 12 months. I've a small office with a 4 computers connected to the printer wirelessly. When printing large files, the printer can't seem to handle it and instead prints out numerous pages containing black lettering ranging from 1 or 2 lines up to half a page. If I'm printing a double sided file that contains both text and images, it can print upto 15 pages on nonsense. The firmware's up to date and it's not practical to connect via cable.
I'm sure I'm not the only one with this problem, but I've not been able to find a solution searching for it.
Any suggestions would be greatly appreciated, as I'm seem to be wasting at least a third of a ream of paper and copious amounts of ink just printing day to day.
Thanks
Mike

Symptoms suggest that the print job is being corrupted (perhaps by some sort of wireless drop-out?).
If the raw data in a print job becomes corrupted, the printer can easily 'lose its way', and be unable to correctly interpret the next 'tranch' of instructions.

My HP Officejet Pro 8600 can't print from my MacBook Air

Hi,
My HP Officejet Pro 8600 can't print from my MacBook Air. It keeps on showing "The printer is not connected", but the screen on the printer shows connected. I often reset the printer 'EVERY TIME" I want to use it. I also tried to turn off my laptop and printer several times before printing. If I'm lucky enough, it will work maybe for one or two prints. If no luck then I'll have to reset everything again. Sometimes I reset the printer, the printer will not show on my selection.
This question was solved.
View Solution.

Hello boojoo1tw,
Welcome to the HP Forums!
I understand you're unable to print most times with your Officejet 8600. How is this printer connected? Wireless or USB? What is your operating system on your Mac computer? Click here to find out.
If your printer is wireless, then I would recommend assigning a "Static IP Address" by following this HP document on Printer Does Not Maintain Wireless Connection.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

I cannot get my new hp officejet pro 8500 a910 to print through my vmware fusion over my imac

i cannot get my new hp officejet pro 8500 a910 to print through my vmware fusion over my imac's airport. My mac prints to this fine and the windows thinks it is printing but nothing. Please help with any suggestions.

install full feature driver from HP website...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Constant Printing Restart on a networked HP Officejet Pro 8500 A909N Series printer

Hello,
I'm curious if anyone has run into this problem before. I have a HP Officejet Pro 8500 A909n Series printer that I have setup as a network printer. This has been accomplished through a print server.
I installed the printer's drivers based upon the cd that came with the printer, in the box.
The problem is that whenever a user prints, say it's a simply one page document... the printer will repeatedly print that single page until it runs out of paper. I have stopped/restarted the print spooler. I've rebooted the printer and the print server. I have deleted the drivers and readded them. I've tried installing drivers from HP's website and then installing those. I have attempted to delete the printer from the server and start from scratch.
When I monitor the print queue, I can see the service restart after each document prints. I can't figure out how to get this to stop.
Does anyone have a suggestion; or has anyone run into this problem? I'm not sure which forum to put this in. I chose the Networks/Wireless forum, even though this is running on a wired network with wireless disabled.
I certainly appreciate any asistance.
-Craig

It ended up being an issue with the port. I had used the same port as the last HP printer that I replaced. This printer needs to run on a TCP/IP port, and not an HP port.
Problem solved.
Oh, and it was wired, with wireless disabled.

Hp Officejet Pro 8600 Premium suddenly printed very slowly from PC

Hi, and thanks for any insights.
I have a client with an Officejet Pro 8600 Premium, and printing to this printer over USB has suddenly become very slow. The dedicated PC is XP with 2 GB of ram and only using 40 GB on a 200 GB drive. The printer has two trays, with tray1 dedicated to checks, and tray 2 for anything directed to plain paper. The printer is not connected to a network, but dedicatd to this PC. The PC is current with updates.
Checks print at the normal speed, and copying prints at reasonable speed, but whejn printed from the PC anything directed to tray 2 prints at a snail's pace . This is new behavior.
I have printed status pages and performed print head and allignment processes. Still, this behavior persists.
I looked i the event log and saw nothing that suggested an evident system issue. Windows update only shows Security Essentials updates for the duration during which the slowness started.
The PC is not acting strangly in any other way.
Any suggestion would be helpful.

Hi,
The information is very general, this applies for many HP printers:
Solution 1: Use a lower print quality setting
Solution: Check the print quality setting. Best and Maximum dpi provide the best quality but are slower than Normal or Draft. Draft provides the fastest print speed.
Cause: The print quality was set to a high setting. If this did not solve the issue, try the next solution.
Solution 2: Check the ink levels
Solution: Check the estimated ink levels in the ink cartridges. NOTE: Ink level alerts and indicators provide estimates for planning purposes only. When you receive a low on ink message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the ink cartridges until print quality becomes unacceptable.
CAUTION: Wait until you have a new ink cartridge available before removing the old ink cartridge. Do not leave the ink cartridge outside of the printer for an extended period of time. This can result in damage to both the printer and the ink cartridge.
For more information, see: Check the estimated ink levels
Cause: The ink cartridges might have insufficient ink. Printing with depleted cartridges slows the printer. If this did not solve the issue, try the next solution.
Solution 3: Contact HP support
Solution: Contact HP support for service. Go to: www.hp.com/go/customercare. This website provides information and utilities that can help you correct many common printer problems.
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: There was a problem with the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printing with HP Officejet Pro 8500 A909n Series Printer & Apple Air Print

I am trying to use my IPad and print from it through Air Print.
Has anyone had any success in printing from an IPad, using the latest Apple IPad operating system (iOS 4.2) to an HP Officejet Pro 8500 A909n Series Printer?
The documentation from Apple indicates compatibility with:
HP Officejet Pro 8500A e-AiO HP Officejet Pro 8500A Plus e-AiO HP Officejet Pro 8500A Premium e-AiO
Will the 8500 A909n work?
Thanks.

Hi,
Airprint is not supported for HP Officejet Pro 8500 A909m Series.
Thank you.
I am an HP employee
**** Please mark the post that solves your problem as "Accepted Solution" ****

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

Hi,
Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

HP Officejet Pro 8600 Plus "unspecified printer problem"

I just set up my HP Officejet Pro 8600 Plus e-All-in-One. The set-up seemed to go okay, but when I go to the "devices" tab for "HP Connected" it has a yellow yield sign and says that I have a problem with my printer. When I click on the yield sign symbol, the box says that "An unspecified problem was reported. Please check your printer." When I check the printer pannel, there are no problems reported. The machine seems to print okay, but I'd like to clear up this error that is shown. Any ideas?
Also, I've already done the restart and sign-off/sign-in stuff, so we can move on to second-order trouble shooting. Thanks.
This question was solved.
View Solution.

HELP!
I am having exactly the same problem. I am simply swapping out an existing Deskjet 3512 that worked perfectly at all levels, so i KNOW i dont have router/port/network issues. eprint was and is flawless. I just plugged it back in to check and it still works just fine with eprint.
Using my new Pro8600, I send emails to my eprint address and they seem to go...and then nothing. they just don't print.
I get the"Officejet Pro 8600 Plus "unspecified printer problem"" message but my front panel reports no issues.
I'm a step away from taking this back and buying an Epson.
My experience with their support has bee stellar at a commercial printer level.
This seems to be a very common problem and I just dont have hours to monkey around with something that should work out of the box.
any help will be appreciated.

My HP Officejet Pro 8600 is randomly printing coloring sheets most often during the night!

For about a month, my HP Officejet Pro 8600 is randomly printing coloring sheets, valentines, etc. Usually this is happening at night! The pages use a lot of ink! How can I get this to stop? Is this part of HP's eprint?? Help!

Hi there, check out this thread for information on how to cancel scheduled print apps.
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Hp officejet pro 8500a won't print or copy without turning off then on again

HP Officejet pro 8500A, Will not print, copy or print received fax. HP icon on the Printer screen just spins, but never prints. The print jobs show in the Que, but never print out. If I shut off the printer and turn it back on it will print, but after a short while it stops again. It has also asked for ink to be replaced.

Hello pcmtgrl
Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP Officejet Pro 8500 won't print yellow. No error message. Cartridge not out of ink.

Printer won't print yellow. No error messages. Cartidge not out of ink, but did put in a new one and still won't print yellow.

Ok SLU87...here are some steps you can take that should help with your Officejet Pro 8500 A909g not printing yellow:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01980797&tmp_task=solveCategory&cc=us&dlc=en&la...
Let me know if it helps or not.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Officejet Pro 8600 will not print multiple copies

When I first set up my HP Officejet Pro 8600 I could print multiple copies. Not sure when, how, or why but I can no longer print more than one copy of any document at a time regardless if it is one page or 100 pages. I tried to update the drivers but the update failed as it said it could not uninstall the printer. When I did the error reporting it said there was no solution.
My OS is Window XP Home
The printer is connected via network.
I print mainly from MS Word 2010 and Adobe PDF files and I have the same issue from either program.
This question was solved.
View Solution.

Since the drivers and software refuses to update automatically, force it to. Uninstall all of the printer software and install it back using a fresh download. That will ensure that you have the latest driver and software for the printer installed and eliminate the need for updates for a while. I'll link them below. If that doesn't fix the problem with multiple documents not printing, try using an alternate driver for the printer. I'll link those instructions below. Let me know what happens.
HP Officejet Pro Full Feature Software and Driver
How to Assign Alternate Print Drivers in Different Versions of Windows
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Officejet pro 8600 will not print card stock

I just purchased the Officejet Pro 8600 and cannot print card stock. I read another HP troubleshooting page and tried to run 100 copies of blank paper through to "calibrate" the printer as suggested by HP technical support. There was a suggestion to disconnect the tray 2 paper tray but I also don't a tray 2. Any suggestions? I print card stock regularly.

Hi breannemk,
Welcome to the HP Support Forums! I understand you are not able to print card stock on your HP OfficeJet 8600, can you please let me know the Exact model of 8600 you are using as well as the Operating system you are running. Do you get error messages when you try to print them, if yes, please let me know the error messages you run into?
Please reply back with the requested information so we can begin troubleshooting.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How do i get the hp officejet pro 8600 premium to print from my ipad2 using airprint?

how do i get the hp officejet pro 8600 premium to print from my ipad2 using airprint? The iPad does not see the printer.

Hi RiverBirch,
What brand and model is your router?
First, connect your printer to your router.
1. From printer front panel, press Wireless>Wireless Settings>Wireless Setup Wizard and follow the onscreen instructions to successfully connect your printer with an IP address.
Secondly, connect your iPad to the same router.
1. Connect your iPad to the Internet and download the free HP ePrint Home & Biz app from the apps store.
2. Connect your iPad to the same network as the printer. Settings>Network.
3. Use the new HP Home & Biz app to print and scan photos or docs from your iPad!
Alternatively, you can also perform Airprint on the iPad thru the wireless network from the Photos menu in your iPad.
Please click the blue Kudos star in the post that helped you.

Officejet pro mac ox garbled print

Similar Messages

Maybe you are looking for