Officejet pro x64 does not print 2 sided

I set up my hp officejet Pro 8615 printer two days ago,i tired to print 2 sided page i push the the 2 side print button nothing, it only print one side.

Hi @mark04,
Welcome to the HP Support Forums. I see that you would like to know how to print duplex with your Officejet 8615 printer.
I’ve included the Printing on Both Sides of the Paper (Duplexing) for HP Officejet Pro 8610, 8620, 8630, 8640, and 866... document which will walk you through how to print on both sides of the paper.
I hope the above helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Hp officejet pro 8610 | does not print and cannot connect it wireless

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

HP OfficeJet Pro 8000 does not print black

Hi We bought an HP office pro 8000 printer which we have had in the box in a cupboard for the last 14 months (never been opened), I have finally got around to getting it out of the box ans setting it up, however it does not seem to print black only the other colours. The black ink looks fine and I can see it comes out of the cart. HP will not help with the problem as the printer is out of warranty even though it has never been used. Anyone got any idea's why it will not print black
Thanks
Colin

Hi Colin & SubChi
Are you able to generate a PQ Diagnostic page? Any black showing up?
Have you tried running a printhead clean?
More details in the link below
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01962224&cc=us&lc=en&dlc=en&product=3762364&tmp...
Please let me know how you get on,
Kind Regards, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Officejet pro 8100 does not print pages in "back to front" sequence

officejet pro 8100: I cant make it print pages in the sequence last page to first page even tho I have set the default printer preferences to "print back to front" AND I have specified "back to front" for the particular print job.
I am using this 8100 as a WIRELESS printer.
Yesterday it worked OK.:
I did NOT turn the printer off over night.
Today it will only print in first-to-last-page sequence.
I have tried the following:
turned printer off; and then on.
rebooted windows 8.1.
rebooted the router.
confirmed that it WILL print in first-to-last-page sequence for each test.
My test document has 4 pages.

Hi John , I hope you had a good weekend!
I just want to verify:
When you print an 8 page document FRONT TO BACK page 1 comes out on top.
When you print an 8 page document BACK TO FRONT page 8 comes out on top.
Is that correct?
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet Pro 8500 does not print

This 8500 is the 4th HP printer that I have owned. Absolutely the worst printer ever. It quits printing, but will not tell you why. Print or copy using the scanner and I get no black ink. Just a blank page with no error message. Put in new ink, same result. I have no idea what to do. Trouble shoot was worthless. Only looking for suggestions for what other brand of printer to purchase.

Hi @Chip-Colorado ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet 6000 Wireless - Does not print black correctly.

HP Officejet 6000 Wireless - Does not print black correctly.
Previously the printer was printing fine.
This evening I printed a diagram I made in MS PowerPoint. The diagram contained black and red text along with black, red, and blue lines. When I took the printed page from the printer, all the black items looked faded. Instead of black, they printed as a light, faded gray. The red and blue printed correctly.
Another user of the printer printed some documents around the same time. These documents had nothing but black text. Every page this user printed showed up completely blank. The black was not even faded. There were no signs of anything being printed on the pages at all.
It seemed strange that one print job would print faded black and the other printed nothing. Considering the possibility that the ink was low, a new black cartridge was placed into the printer. The exact same results occured. My diagram printed correctly except for the fact that the things that were supposed to be black were coming up as light gray. Once again, the documents printed by the other user came up completely blank.
I ran a print test on the printer. It printed a Windows logo with the word "Windows" below. The logo printed correctly. The text showed up as a light, faded gray.
A third user printed an Excel spreadsheet. The cell borders were printed as a light gray. Nothing else printed. Everything in the spreadsheet was supposed to be black.
The third user also printed a recipe from MS Word. Most of the text showed up as a light, faded gray. Some text did not show up at all. I could not see any correlation between what showed up in faded gray and what did not show up.
It seems to me that if something was wrong with the cartridges, it would either always be faded or not print at all. I can consistently get some things to print faded and other things to not print at all. Color always prints correctly.
The print jobs were sent to the printer wirelessly from three different computers. Two computers run Windows 7 (x64). The third computer runs Windows XP SP2.
As far as I can tell, nothing was changed or done differently between now and the last time something printed correctly.
Might this be a driver issue? Since the printing consistently prints one way for certain files and another way for other files, I don't see it as being caused by hardware. If it's not a software issue, what could possibly cause the effects I described above?

This article should help resolve your partial/blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HPOfficejet Pro 8600 does not print the page as shown in WORD. I am using win 7, 32-bit OS.

HPOfficejet Pro 8600 does not print the page as shown in WORD. I am using win 7, 32-bit OS. How do I fix this?

Sounds like the table is to large to fit on a single page. Have you tried using the "Shrink to Page" option in the Print Preview? Depending on your version of Word, my attached picture may not be 100% similar but it should be enough to give you an idea. Here is the option inside the print preview menu:
Let me know if this resolves your issue
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hp officejet pro 8500 will not print alignment page

Hi, I saw that others on this thread where having similar problems and I was wondering if anyone could help.
I have been having trouble with my HP Office Jet Pro 8500 Wireless (A909g series) printer with the print heads. Initially, it stopped printing in blue so I followed all of the steps for cleaning the print head ect. At one point I had removed the print head and reinserted it and at that point, I started to get the "alignmnet failed" message. I just purchased a new M/B print head, and while it now prints in blue when a test page is printed, I still get an alignment failure notice when it tries to align the print head. In addition, it does not print the full alignment page, only the top colored lines. While I can print, it always runs an alignment afterwards, again failing. I would apprecaite any help you could provide. This printer has been great until now, and I do not want to waste anymore ink trying to print and it failing the alignment everytime. I am running Windows 7 professional. Thank you.

Hello , Welcome to the thread! I understand that your HP Officejet Pro 8500 All-in-One A909a Printer is experiencing Printhead and Alignment failures. Because you have already replaced both the Cyan and Magenta Printhead (twice) and Black and Yellow Printhead in the past and the issues continue to occur over time I believe that the Printhead sensor or print system within the actual printer is going. Should this occur then print system issues, such as Alignment, Printhead, cartridge, quality, etc issues will occur and will usually become worse over time. Therefore, rather then replacing the Printheads it may be time to replace the actual printer. With that being said, there are a few troubleshooting steps that I would like you to complete to resolve this issue. To start, please click here . Once the support document opens please review all of the listed Solutions and sub-steps to ensure that all steps have been completed. Should the issue persist, then a Firmware Update may be needed on your printer. However, I do need to know what Operating System you're using on your computer in order to provide you with the correct Firmware Update. The Firmware is the internal programming within your printer. It controls what your printer does and how your printer does it. If there is a corruption within the internal programming in your machine, your HP Officejet may not respond correctly. Please respond to this post with the result of your Alignment Failed troubleshooting. Should the issue persist, be sure to include your Operating System in your response so I can provide you with the additional Firmware Update. I look forward to hearing from you!

Officejet Pro 8600 will not print multiple copies

When I first set up my HP Officejet Pro 8600 I could print multiple copies. Not sure when, how, or why but I can no longer print more than one copy of any document at a time regardless if it is one page or 100 pages. I tried to update the drivers but the update failed as it said it could not uninstall the printer. When I did the error reporting it said there was no solution.
My OS is Window XP Home
The printer is connected via network.
I print mainly from MS Word 2010 and Adobe PDF files and I have the same issue from either program.
This question was solved.
View Solution.

Since the drivers and software refuses to update automatically, force it to. Uninstall all of the printer software and install it back using a fresh download. That will ensure that you have the latest driver and software for the printer installed and eliminate the need for updates for a while. I'll link them below. If that doesn't fix the problem with multiple documents not printing, try using an alternate driver for the printer. I'll link those instructions below. Let me know what happens.
HP Officejet Pro Full Feature Software and Driver
How to Assign Alternate Print Drivers in Different Versions of Windows
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Officejet pro 8600 will not print card stock

I just purchased the Officejet Pro 8600 and cannot print card stock. I read another HP troubleshooting page and tried to run 100 copies of blank paper through to "calibrate" the printer as suggested by HP technical support. There was a suggestion to disconnect the tray 2 paper tray but I also don't a tray 2. Any suggestions? I print card stock regularly.

Hi breannemk,
Welcome to the HP Support Forums! I understand you are not able to print card stock on your HP OfficeJet 8600, can you please let me know the Exact model of 8600 you are using as well as the Operating system you are running. Do you get error messages when you try to print them, if yes, please let me know the error messages you run into?
Please reply back with the requested information so we can begin troubleshooting.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Officejet Pro K5400 - will NOT print on both sides

I recently built a new computer and everything is working great, EXCEPT one thing...when trying to print on both sides using Google Chrome, Microsoft Word, or another program it gives me the error message below. My previous computer had Windows 7 installed as well and my HP Officejet Pro K5400 had no problems printing on both sides of the paper. I tried using the Starter CD that came with my printer, but unfortunately since it wasn't for Windows 7 (only for Windows XP and Windows Vista) it will not install it. I also went to HP's website to downloaded the latest drivers. I was able to download them, but it hasn't fixed my problem. By the way, I do have a duplex unit on my prtiner (in case you're wondering). I'm not sure if my duplex unit still works, or if it's something else. If there are any solutions that you can give to fix this problem, I would be very appreciative. The error message is below:
Automatic Two-Sided Printing Module Missing
The document has been configured to print using the Automatic Two-Sided Printing Module but the module is not installed in the device.
The document will be printed one-sided.

Hi,
First remove and re-0attach the duplex accessory at the bak of the printer to enure it is well seated:
http://support.hp.com/us-en/document/c00845167/
Next ensure the duplex unit is set as installed within the print driver by entering the Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now try printing on both sides and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 7580 networked & not printing via PC or Mac

I have a hp officejet pro 7580 and I'm unable to print. I'm unable to communicate with the printer via Mac or PC. I have added the printer again and downloaded a recent update via the PC. I have restarted the ethernet router and the printer, still not printing. I have had this problem before but it "magically" started printing. Now the communication problem is back and I need help! On the PC (HP Officejet Pro L7500) shows the port in the print que address so it does see it but there is a printing error. I have an iMac (intel) running Mac OS 10.5.4 and a PC running XP Pro We have had the printer for about 3 months and this has happenned twice before. I am able to print an "Self Test Diagnostic Page" from the Mac. But any other document results in a communication error.
The first time I reloaded the software on both computers and it still didn't work then later it worked and later it happenned again and then worked days later.
Now, I've tried a "fixed IP address: 192.168.173; Subnet mask: 255.255.255.0; default gateway 192.168.1.2; Configuration source: manual; DNS Server: 192.168.1.2; Link configuration: 10TX - half (network printing). It was working for awhile.
Now, It is back again communication error (not printing), why is this happenning? Please, please help! Thanks.

Hi,
Follow the link below to solve the issue :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01849855&tmp_task=solveCategory&cc=us&dlc=en&la...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Officejet pro 8625 will not print

Just purchased this printer. Scanning, faxing, email to printer all works fine. When I try to print any document it spools then deletes the print job as if done but doesn't print. I have uninstalled/reinstalled, run the diagnostic test and nothing is fixing it. Very frustrating and on the verge of returning the printer to Costco!

Hello , Welcome to the HP Support Forums!
I understand that you're not able to print from your Windows Vista computer to your HP Officejet Pro 8625 e-All-in-One Printer. I would like to assist you today with resolving this printing issue. Because you are able to scan from your computer I do not believe that the issue that you're experiencing is connectivity or software related. Rather, it does sound like a driver conflict is occuring between your Windows computer and your printer. To confirm if this is the case, can I please have you follow the steps below to install an alternate print driver on your HP Officejet. You will not lose any functions by utilising this alternate driver. Step 1: Clear Temp Files: Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 2: Load Alternate Driver: Please click here to download the Officejet driverOnce the download is complete you may get a prompt to Run the download. If you see the Run prompt, please allow it to Run.An extraction should now occur. Once the extraction is complete an installation window may pop open. Please close any install windows. You do not want to run an installation.Next, click on your Start menu. In the 'search programs and files' box type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. It should include files that say OJ860At the top of this folder you will see a file path bar. It may show something like 'Computer- Local Disk C - Users - AppData - Local - Temp - 7z . . . ' Left click on the right hand side of this file path bar at the top. The file path should now highlight.Right click on the highlighted file path and select CopyClose the Temp folderClick on your Start menuSelect Devices and PrintersRight click on your HP Officejet Pro 8625 e-All-in-One
Left click on Printer PropertiesLeft click on the Advanced tabLeft click on New DriverWhen the New Driver window opens please hit 'Next' until you see a list of Manufacturers and PrintersClick on the 'Have Disk' button on the bottom rightWhen the 'Install from Disk' window opens, simply right click on the file path bar and 'Paste' in the file path we previously copied.Click OKWhen prompted choose the HP Officejet 8600 Printer and click 'Next' until the Add Driver window closesUnder Printer Properties select Apply, but don't hit OKSelect the General tabRename your printer back to HP Officejet Pro 8625 e-All-in-One
Hit OK Now that the alternate Officejet driver has been loaded, please test printing to confirm if the printing issue has been resolved. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

HP OfficeJet Pro 8600 Will Not Print Wirelessly

Hi. I have read other threads on this forum with suggested fixes from HP employees and tried them. I have run the tool which found no errors. My firewall is off. I have installed the latest Adobe and uninstalled then reinstalled the printer software. I have followed instructions in book re: turning off computer, router, printer, etc. I can see the IP address for the printer in IE.
Still, this brand new printer will not print wirelessly or otherwise from my hp laptop. VERY frustrating. I have spent hours trying work arounds for a brand new computer. I would greatly appreciate a response regarding how to resolve this problem. Thank you.

I have seen cases where a troubled install went through flawlessly after the computer was reimaged. That may be an option to consider.
I did want to make sure that you had the most current firmware version and it looks like you do.
Before a reimage, you could uninstall Officejet Pro 8600 programs (if there are any) and download and install the drivers for your printer from hp.com. Click here for the HP Officejet Pro Full Feature Software and Driver. By doing this, you would have the most up-to-date drivers. Sometimes a download will work where a disk does not. It you do decide to reimage, I highly recommend the above download for the installation.
Let me know what happens.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

New Officejet Pro 6830 will not print via USB connection. It scans great to PC. It copies.

New HP Officejet Pro 6830 for user to have local USB printer/scanner at desk. User runs win 7 64 bit on a network. Raninstall through setup.exe. Followed steps, connected printer via USB when it said to and it detected it and finished install.You can use HP Scan software and it scans to the PC perfectly. It will not print from any application or even a testpage from the Printer Properties page. If you go to the maintenance application it will print status and test page. If you run HP Scan and Print doctor it does it's thing, gives all Green Check marks and lets you print a test page fine, but it stillwill not print even a test page from the printer properties page (start/Devices and Pritners/right click on Officejet Pro 6830, select Printer Properties for Officejet Pro 6830 (not the Fax 6830), and click print test page. It does not seethe printer. It is a networked PC and has network defined HP network printers as well but user wanted a printer/scanner at his desk. I actually took the unit and connected to my laptop which is same win 7 64 bit platform and it does the same thing. I disable the virus protection to do the install so that is not an issue. It clearly sees and installs the printer, andlike I said the HP Scan works fine so it is connected via the USB to the PC, but it will not print. I have tried to install from the CD, and removed device and tried to install from the new downloaded drivers as well and it just does not want to print.I have conected to different USB ports, and like I said actually tried it on a different PC and had same results. Guidance certainly would be appreciated.

Hi , I see by your post that you can scan, but are unable to print over the USB connection. I would be happy to help you.
I have provided a document for setting Security permissions for printing to see if that will help. If the issue persists, reinstall the printer on the Administrator Account to see if you have the same results.Unlock Hidden Administrator Account and install the printer on this account: Go to your Start menu and under the 'search programs and files' box type CMD. CMD will populate as a search option above, just right click on it and 'run as administrator'. Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter. Next, close CMD and restart your computer. When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it. If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.Under the Administrator account, install the printer software. Test the printer. To turn off the Admin account start back at step 1 and type in net user administrator /active:no.Please let me know the outcome. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

Officejet pro x64 does not print 2 sided

Similar Messages

Maybe you are looking for