OFFICIAL APPLE INFORMATION ABOUT COMPATIBILITY WITH EXPLORER

Hi,I have problems with incompatibility with IE 6+7. In my coutry is 80% people on IE. Every schools, iCaffe etc.Is very, very big problem with iWeb'08 - I make a lot of job but after this is result..........incompatible.Is some OFFICAL INFORMATION FROM APPLE about future plans compatible with IE? I'm looking for programs with similar function as iWeb - RapidWeaver, Sandvox etc. - but NEVER I see better program - iWeb is still my favorite, is nice design concept, maximum intuitive, and very user friendly Thank for your oppinion! Blacky
Message was edited by: yamahacb
Message was edited by: yamahacb

Here are some tips I've gathered from this forum on how to make sites more compatible with IE.
1 - do not use and frames or borders, etc. around photos.
2 - don't use any reflections.
3 - create your own navigation bar with linked text* and turn of the iWeb Navigation bar. That's because the nav bar is all png based.
*Put your linked text directly under the Navigation bar. Then turn off the nav bar in the Inspector window. The nav bar will disappear and the linked text will move up to the top of the page as seen in this screenshot.
4 - use only the web safe fonts from the Font pane.
5 - do not use drop shadow on fonts.
6 - turn off smart quotes
7 - if you add a jpg to a page don't resize it in iWeb as that will cause it to be converted to png. Resize it to what you need before adding to the page..
The above will reduce the number and size of files associated with a web page quite a bit. Photos with fancy frames and reflections can generate a thumbnail png of around 110KB whereas the plain version will be a jpg of only 28KB. Although it doesn't sound like a lot, it will speed up loading of the page and be more darkside (i.e. PC) friendly.
Run a test with a test site and publish to a folder. Then follow the hints above and publish to another folder and compare folders.
Also there's a site, netrenderer that you can paste your site's url into an entry field and it will display how the various versions of IE will display your site. I don't know how accurate it is but may give you an idea of where problems areas are.

Similar Messages

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lighroom 5 if I upgrade from Snow Leopard to Lion?

I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lightroom 5 okay if I upgrade from Snow Leopard to Lion? What will happen to the applications that aren't 64-bit compatible? Also the Eye-one Display 2 colorimeter to calibrate the monitor will not run on Lion, so that will be an expensive upgrade to an i1DisplayPro. Is the upgrade important enough to offset the expense? I have an Epson R2000 printer. Will there be problems with the drivers if I upgrade to Lion? It would be great to hear from other mac users who are also photographers and who print their own photos.

Before upgrading to Lion be sure to read this link:
https://discussions.apple.com/docs/DOC-6271
Adobe lists these requirements:
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Looking at http://www.everymac.com/ even the earliest 2008 iMac was fully 64 bit, even though Boot Camp doesn't support 64 bit Windows on that machine.

What might be issues with Apple TV's compatibility with Samsung LED TV's, specifically the 5550 or 5500.

What might be issues with Apple TV's compatibility with Samsung LED TV's, specifically the 5550 or 5500?

I am shopping, with a focus on Samsung, and was told by a Samsung rep their TV's were not compadible with Apple TV. I found this difficult to believe so I wanted to pursue with persons knowledgeable with Apple TV.
If I find that Samsung is not compadible I wanted to determine which lines, e.g. Sony, might be compadibile, as I wanted to use Apple TV.
Thank yoyu

Incorrect information about computer with serial number?

In the Support section of the Apple website, I get some incorrect information about my MBP when I enter my serial number (to see my warranty status). It says that my computer has a glossy screen, when in fact it doesn't.
What can I do to fix this? I need to have some work done on my computer screen and it would suck getting it back with a glossy screen

go to the genus bar or call applecare

Need information about notification with SAP Netweaver Identity Management

Dear Experts,
I need some informations about send e-mail from SAP NIM. We want to send an e-mail after creation of sap users etc.
Please note that today we have a Domino/Lotus server.
I undertsood that we can send e-mail through the Identy Center (IC) component. But I did not find how to set up this solution? I did not find architecture informations?
Could you please provide me the different configuration steps?
Should I install another component? Or I just have to configure my SMTP Server?
Also, have you got the best practices for this step?
Thanks a lot for your help
Regards
Hocine NAÏ

Hello,
For notification, first you need to create a repository of generic type and provide the lotus notus host details in the repository constant.
Eg:
EMAIL_SERVER abc.def.com
EMAIL_ORIGINATOR orignator mail ID
Then create a task with the "To Generic" type Pass.
Select the name of the function below in the Next data entry of the Destination tab of the pass.
and provide the attribute and value as below:
MSKEYVALUE %MSKEYVALUE%
EMAIL_RECIPIENT recipients mail ID
EMAIL_SUBJECT Hello %DISPLAYANEM%
LOCATION %LOCATION%
Eg of a Function to sent mail is shown below:
function SendEmail(Par){
 Recipient = Par.get("EMAIL_RECIPIENT");
 Subject = Par.get("EMAIL_SUBJECT")
 Location = Par.get("LOCATION");
 Body = "This is a report from SAP NetWeaver Identity Center at %$ddm.date% %$ddm.time% ";
 Body = Body + "Your location is " + Location + " ";
 Body = Body + " ";
 Body = Body + "Best regards ";
 Body = Body + "MaXware AS ";
 UserFunc.uSendSMTPMessage("%$glb.EMAIL_ORIGINATOR%", Recipient,Subject,Body,"%$glb.EMAIL_SERVER%",1);

Apple Macbook Pro compatibility with HP EVA P6500 SAN

I am submitting a SAN solution for a customer who is using Macbook Pro as a Montage unit, does this machine support HBA card for Fiber connectivity?
My SAN soltuion is HP EVA P6500.
Please I need answer ASAP.

Thanks for your swift reply to the Apple/HP compatibility question. Trust it will work when I buy MacBook Air. The HP app available at iTunes store helped us make our older Apple IPad print compatible even though the HP 6500 Wireless is not equipped with AirPrint.
Regarding slowness of HP 6500 to reach "Ready" stage for printing. This is a printer for home use, so it not on a network. It always eventually prints.
Your help is much appreciated.
TT95

Any official Apple response about defective MM?

So many complains about the defective wireless MM, and not even one single official word from Apple... Am I right, or have I missed something? Frustrating! Apple should at least have acknowledged the existence of such a problem even if they do not seem to have the finest idea what to do about it.
From what I read, there is no fix either. All known 'fixes' are premature. I hate the idea of switching MM on/off on a constant basis... I am not willing to change every half an hour or so the location of the battery... I have no sensitive fingers to know exactly where to touch the notty mouse...
In short, wireless MM is not an Apple product like those I used to be proud at, and the fact that Apple apparently does not care drives me nuts! Naively, as a loyal Mac lover for years, I do expect more from my Apple.

No answer is also an answer...

Apple macbook air compatibility with HP Officejet 6500 Wireless

Two questions
1. If I buy a new current model MacBook Air, will it work with my HP Officejet 6500 Wireless printer?
2. Sometimes when I power up the printer, it can take as long as five minutes to register "ready." Why the erratic time to go online?
Thanks
TT95

Thanks for your swift reply to the Apple/HP compatibility question. Trust it will work when I buy MacBook Air. The HP app available at iTunes store helped us make our older Apple IPad print compatible even though the HP 6500 Wireless is not equipped with AirPrint.
Regarding slowness of HP 6500 to reach "Ready" stage for printing. This is a printer for home use, so it not on a network. It always eventually prints.
Your help is much appreciated.
TT95

A Question about Compatibility with Parallels

Hello, all. I wasn't too sure where to post this, and I saw someone else posted a Parallels question here so I figured it wouldn't be a big deal. I have a MacBook Pro 15 Inch that I bought in May this year, and I was wondering if I could use Parallels to install Windows XP on it. I'm not sure if it will work because Apple apparently designed my computer to only work with Windows 7 if I were to install it through Boot Camp, but since I'm not really in the mood to shell out two hundred bucks for that OS, I was hoping I'd be able to just get Parallels and install Windows XP without any post-installation issues (like being unable to connect to the Internet and such, like the problems one would run into through a Boot Camp install if they didn't install the drivers). Could I use Parallels on my Mac instead of Boot Camp and install Windows XP?
Also, I have a minor question that I think I might already know the answer to, but I just thought I'd ask anyway while I'm here. Could Parallels Desktop 4 work with my computer?

AxelRWolfe wrote:
Could I use Parallels on my Mac instead of Boot Camp and install Windows XP?
Yes.
Could Parallels Desktop 4 work with my computer?
Verify that you machine meets the below requirements:
Hardware and Software Requirements for Parallels Desktop version 4
Hardware Requirements
Any Macintosh computer with an Intel processor (1.66 GHz or greater). To run 64-bit
operating systems in virtual machines, an Intel Core 2 or later processor is required.
Minimum 1 GB of memory, 2 GB of memory is recommended.
CPU must support Intel-VTx Virtualization feature
Almost on all CPUs used in Mini Macs Virtualization is supported, but in several early Mac Mini models it may be disabled in firmware.
Please see article http://kb.parallels.com/en/5653 how to enable Intel VT-x Virtualization support.
Note: Your Mac must have enough memory to run Mac OS X and your Mac applications,
plus the memory required for the virtual machine's operating system and the applications
installed in it. About 300 MB of disk space on the boot volume for the Parallels Desktop installation.
About 15 GB of disk space for each virtual machine.
Software Requirements
Mac OS X Leopard v10.5.2 or later
Mac OS X Tiger v10.4.11 or later

Apple Raid Card compatibility with Tiger 10.4.11 ?

I am considering raiding 4 internal HD in a Mac Pro and I am still using Tiger 10.4.11.
Is there some compatibility issues with Apple Raid Card ?
The card specs say it should run 10.5 to work properly.
Any hints ?
TIA

I find mixed results here...
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso
By putting in MacPro & 10.4, then searching the results for the word raid, though I don't see 10.4.11 specifically, I did notice RAID getting broken at upgrade points, and less than spectacular results... heck, my 10.3.9 SATA I, 2 drive RAID 0 on a QS/2001/G4/DP/1.467 does almost as good as the MacPro results.

Just purchased Z97 Gaming 7 and was wondering about Compatibility with RAM

Hello there,
Just purchased the Z97 Gaming 7 MB and was wondering if it is compatible with the following RAM -
Kingston HyperX 16 GB 1600 Mhz CL9 DDR3 HyperX Beast Desktop Memory Kit (2 x 8GB) - Intel XMP
G.Skill 16GB Ripjaws X Dual Channel Memory Kit - Blue (2x 8GB, DDR3 1600MHz,1.5v, F3-1600C9D-16GXM, XMP Ready)
Corsair CMZ16GX3M2A1600C9 Vengeance 16GB (2x8GB) DDR3 1600 Mhz CL9 XMP Performance Desktop Memory Kit Black
Regarding the Kingston, the model number specified in the MSI compatibility list of this board is very similar to the ram I've listed.
Thanks in advance and feel free to share your opinion on the rams or if you recommend anything else.
Thanks

Quote from: Sea Dog on 06-August-14, 14:36:13
It's too late for that. OP inquired about Z97, this has taken a turn to a Z87 and a debate.
Seems you have a bit to learn about RAM speed and actual performance achieved. Over 1866 doesn't show much gain. Higher the speed the more you have to 'loosen' the timings, :: rest of quote snipped ::
Yes, I probably could learn a thing or two about memory I suppose. I don't claim to be an expert on this subject. But, I've built several systems (always with Asus boards...) for 15 years or so for myself, family, and friends. I have a BS in computer science and masters in Electrical Engineering working in the SCADA/Control Systems field (look it up) so I do know a thing or two. I've never had a problem till now, my first MSI board.
I'm not sure how responding to a thread, hoping a user’s experience with memory would benefit me, is "hijacking" a thread but call it what you will. I don't recall too much of a debate except from you and the forum memory expert (not the GSKill guy, the other guy...) so back off. Funny how MSI's recommended memory list(s) prominently mention GSKill as being compatible multiple times with my exact memory, the F3-17000CL9Q-16GBZH, being listed as well. Yet, GSKill is up to something funny with their timings which benefit only Asus or whatever while causing problems on everyone else motherboards.
For future reference, I'm not claiming anything in particular (such as memory) is causing my system to crash. I saw the forum sticky about GSKill memory and this thread which mentions GSkill. Since I'm using GSkill, which I have for multiple system builds without issues in the past, I began to wonder about something. After all, things do happen. Perhaps I simply got some bad sticks or something. It does happen regardless of brand/vendor.
For the record, I suspect the stupid Killer NIC, its driver, and/or system tray panel are to blame for my issue(s). The more I think about this NIC, the more I hate it. Give a boost to a specific app/game for better performance. That's marketing BS. All it does is give a specific app/game priority by purposely dropping performance of all the other apps so the designated process looks better relative to the other programs on the same system. I call that false advertising and potentially something worse.
Time will ultimately tell where my issue is.
MSI may have lost a customer...
The best of everything to everyone here and enjoy the rest of the day,
Chris

Wanted to share information about problems with Imessages :)

I was having issues getting Imessage to activate... I wanted to repost this information I found in the "more like this" section. It helped me, fixed my issue. So I figured I would share in case someone else was having this same problem :
Ryneeev Indiana
Re: "Waiting for Activation" iMessage and Facetime on brand new iPhone 4s Mar 25, 2012 12:26 PM (in response to victormacmaniac)
Mine didn't work for 2 months and this fixed it, so I posted it in another discussion and have been getting "thank you" replies nearly daily:
Just update your date/time settings:
Settings
> General
>> Date & Time
>>> Set Automatically: Slide "ON"...If it's already on, then slide it off, chill for a bit (maybe restart it), then slide it back on.

So no one wants to help or give advice!?! you guys are the best profesionals ever! super pissed yall can get away with this

About compatibility with CS4

I ask, may i use Kuler on Photoshop CS4, is it compatible with CS4, thanks.

You mean that Kuler is there by default ?
I have nothing in my window/extension menu, except "connections"...
I haven't found any .mxp or .mxi extension for photoshop CS4 on adobe's website, neither on Adobe Exchange.
I'd really like to have Kuler integrated in Photoshop although Adobe says that we can get the extension for CS4, they don't provide any link to it on the dedicated Kuler's page, except the AIR widget, and a link to the kuler online tool. (...or am i blind ?)
Does any of you guys have some tip to get it appear, or a direct link to download the .mxp or .mxi extension ?
PS : i'm on a french version of photoshop cs4 64bits, version 11.0.1.,

Motherboard upgrade, question about compatibility with existing hard drives etc.

Hi, I currently have an K8N Neo2 Platinum socket 939 board, 2 gig of OCZ Platinum PC3200 DDR400 RAM, a Lian Li V1000 ATX case, an AMD Athlon 64 3000 processor, 2 Sata 1 hard drives and a TAGAN TG380-U01 380W power supply. All this stuff is from around 2005.
I'm thinking of upgrading my board to a MSI 870A-G54. Obviously I'll need new memory and a new processor, but my question is this - will I still be able to use the Lian Li case, and the Sata 1 hard drives/power supply with the above board? Also, does it have onboard graphics or will I need a dedicated video card?
Thanks,
Chris

Quote from: russianpolecat on 05-May-11, 07:19:26
Hi, I currently have an K8N Neo2 Platinum socket 939 board, 2 gig of OCZ Platinum PC3200 DDR400 RAM, a Lian Li V1000 ATX case, an AMD Athlon 64 3000 processor, 2 Sata 1 hard drives and a TAGAN TG380-U01 380W power supply. All this stuff is from around 2005.
I'm thinking of upgrading my board to a MSI 870A-G54. Obviously I'll need new memory and a new processor, but my question is this - will I still be able to use the Lian Li case, and the Sata 1 hard drives/power supply with the above board? Also, does it have onboard graphics or will I need a dedicated video card?
Thanks,
Chris
Case, HDD - Yes
Onboard graphics - No
PSU, maybe but probably not. Something with more power would probably be wise to get. What PSU you get would depend on the CPU & graphics card you get.

Sun one server 6.0 doesn't work well with explorer

We've sun one server 6.0 sp4 running in a sparc server as SSL server and too as common server on port 80. The most our clients , 95%, are explorer browser users.
The server has known bugs with SSL3 , interoperatibility with MSIE problem 532427. The solutions suggested in the server documentation don't work. We tryed the solutions suggested many times and in few time we got complaints from clients, people get "this page can't be displayed". I had to set the server to work with SSL2 only , althought security's reports tell that this protocol is not safe.
The second bug is concern the latencies loading pages with explorer. I apply the solution suggested, KeepAliveQueryMeanTime 1, it doesn't work well too. We don't feel the latencies on new machines or light browsers as avant , but we still feel these latencies with old machines or if the users uses modem. A lot of people still see very strong latencies.
I feel the server wasn't tested enough with explorer browser , it has so many compatibility problems with this browser.I think for the most webmasters the perfect compatibility with explorer is very important.
We payed for this server and it is worst than apache ,apache group fixed the SSL problem long time ago. Only one thing we need doesn't work well in apache then we contenue to use sun one server. But this diference is not enough to justify the use of this server if sun don't fix these problems. I'm talking about problems they exist more than 1 year, they were when i installed the server then i contenue to work with iplanet 4.1 and SSL2. I read the new version server characteristics, version 6.1 , i didn't find anything telling that these problems were fixed.
Yair Lapin
Hebrew University Webmaster

Yair -
Unfortunately this is a little vague. Can you tell us specifically what problem(s) you're having (unfortunately your current message does not go into adequate detail for us to understand the problems you see, or to make recommendations about how to remedy them).
Thanks
Joe

OFFICIAL APPLE INFORMATION ABOUT COMPATIBILITY WITH EXPLORER

Similar Messages

Maybe you are looking for