Official Software version 10.2.1.3253 for Z10??

hello all, i'm new BB user. My Z10 couldn't boot before so installed software version 10.3. I had no idea it was just beta. Now i would like to have version 10.2.1.3253 for my Z10. But i have no idea where can i get the official one??
Please help
Thank you in advance. 
Solved!
Go to Solution.

OK, understood.
The 10.3 file you installed with missing apps was the developer beta, it had missing apps on purpose.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Software version 7.4(100.1) for WLC

    Hi
    Anyone has idea that when Cisco will release software version 7.4(100.1)  for WLC.
    Regards,
    Nomi

    Hi Scott,
    We are hitting by bug CSCud97983 and Cisco says it has been fixed in 7.4(100.1)
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCud97983
    Thanks
    Nomi

  • I have iphone 3gs 16 gb. after i downloaded software version 5.0, my phone stopped working. it keeps saying that the phone doesnt have a simcard.

    I got a message that " iphone software version 5.0 is available" for my iphone. After i updated it, i got a message that my iphone could not be activated and to try to connect to itunes which i did, but i got a message that my phone has no sim card. Even with a sim card inside, my phone says that there's "No service." What happened? Help!!!

    Yes, I tried. But nothing is working. I am feeling bad as such a costly phone stop working in 1.4 year ?
    I am just sharing my experience.
    I am not ranting but yes angry as I am eligible for upgrade in Nov 2012 so don't want to pay $149 for replacement as I can upgrade to iPhone 5.
    Apple expert please help me how can I fix it. It's completely software issue.

  • Dear Communities, please kindly assist me. I use iphone 3GS with Software Version 4.1. Each time I connect my iphone to my Laptop through itune. itune automatically tells me that itunes connect to itune store. An unknown error occured(306)

    Dear Community,
    Please, kindly assist me with following challenges. I use iphone 3GS. I have used the phone for almost a year now. My iphone 3GS cannot connect to the itunes store. Each time I connect my phone to my Laptop through itunes. A message will automatically come up which states that "iTunes could not connect to the iTunes Store. An unknoown error occured (306)". It also make a footnote which states "make sure that your network connection ia active and try again". When I click the button labeled OK just below the messages, another message will come up which reads, "A new iphone software version (5.1) is available for the iphone software. Would you like to download it and update your iphone now?". It gives me the option buttons such as CANCEL or DOWNLOAD AND UPDATE or DOWNLOAD ONLY. If I click on DOWNLOAD AND UPDATE or DOWNLOAD ONLY. Another message will appear which states that "The iphone software update Server could not be conted" With a Footnote that states "Make sure your network settings are correct and your network connections is active, or try again later.
    The above challenge has continued for more that 3 months now. This challenge has hindered me from installing some applications like Facebook Application for iphone, LinkedIn application for iphone and a lot of other applications. Each time I try to get these applications my iphone 3GS while inform that my current ios version 4.1 cannot work with the application, that they requires at least ios version 5.1 or above.
    Please, I really need your kind assistance. I am ernestly waiting for responses.

    Dear Tim,
    I saw your message. Below are the problems:
    Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
    1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
    2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
    The above is the challenges I am facing now.

  • UPDATE software version 10.1.0.273

    I read that the new software version 10.1.0.273 for Q10 was released for Bell, Rogers, and Telus. Does anyone know where it is? It is not available through BlackBerry Link.
    Linda

    apologies, 273 is not leaked, the 2342 is leaked, just to clarify

  • IPod Nano 2nd generation software version

    Hi
    I need to grab a used iPod Nano 2nd Generation to replace the one I left on the plane   : (
    It's quite amazing how much value these units hold on eBay. My question is, what is the latest (or possibly the last) software version that Apple has released for this unit? I want to make sure that I ask the eBay seller what version of the software is installed on the one I'm looking at, as I feel that a currently updated unit will have the best chance of functioning properly. I am running Windows 7 on my home computer.
    One of the ones I'm looking at has a picture of the information screen on the unit and it says it has software version 1.1.3. That can't be anywhere close to the last/best one, can it?
    I assume that 2GB, 4GB and 8GB are the same in terms of software. I am looking for a 4GB version, or possibly an 8GB.
    Any help is appreciated.
    Nick

    That is correct.  Version 1.1.3 was the last firmware update released for the 2G Nano.
    B-rock

  • WLC software version for "N"

    Greetings -
    I have a WLC4402 currently running software version 4.2.207.0. With 802.11n just getting officially ratified I was wondering what is the "Cisco-recommended" software version for 802.11n? Should I stay at 4.2.207.0 or move up to 5.x/6.x? I have 1252 access points that are using 3560-E switches for ePoE (20w for powering both the 2.4Ghz and 5 Ghz radios).
    Any information would be greatly appreciated.
    Thx
    Joe

    Thx for the reply.
    I wanted to stay at version 4.2 if I could. Reason being is that 4.2.x has been very stable and reliable for me while I cannot say I have had the same experience with 5.x. If 4.2.x will support 802.11n then I will continue to use it. Being that the ratification was just announced a couple of weeks ago I didn't know if Cisco had version of software that they recommended for 802.11n deployments.
    Thx again for your input.
    Joe

  • I have just received an iphone 4 from a friend and it is in software version 4.3.2 still and will not update to latest version. It updates for about 3o minutes and then an error reading that my interent connection timed out? Any suggestions?

    I have an Iphone 4 from a friend. It was never updated with him and now I am trying update to latest software version. It is currently in 4.3.2 and it updates till the last few seconds and then a message, with no error number, states that the internet connection had time out during update. I am using my PC and have tried unsuccessfully for a week. I have tried to restore setting on phone first before plugging in to PC and updating software through Itunes? I took it to my mobile phone outlet and they couldn't help? Is there another way?

    Read through this:
    http://support.apple.com/kb/ht1808

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

    I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

    yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

  • When I click on a saved document or spreadsheet, I get this message You need a newer version of Numbers to open this document.  When I go Software update, there is no update for pages or numbers.  can't purchase or update?

    when I click on a saved document or spreadsheet, I get this message 'You need a newer version of Numbers to open this document'.  When I go Software update, there is no update for pages or numbers.  can't purchase or update?
    Trying re-purchasing.  won't let me.  says to check for updates?
    any suggestions

    It sounds to me as though you are attempting to open a Pages 09 document with the Pages 08 application. If you do have Pages 09 on your computer, it may be that for some reason an existing Pages 08 application is invoked accidentally.
    Jerry

  • HT4972 i want to update my software version to 6.1.3. but my c drive runs out of memory and i cannot upgrade it at the end, but having to delete the files and gain  more space for the computer to operate... plz help me :(

    i want to update my software version to 6.1.3.. but i have never updated this before and this is my first time.. im having 20 GB apps and music in my ipod. so when i click 'update and download' tab it starts downloading the new version and upgrading,... but afetr some time it says im having a very low memory in c drive and i would have to stop the upgrading...
    can i use my external hard to save this download and upgrading files without using my c drive? plz give me a solution as im only having only 7GB of space left in the C drive

    I would rather you delete/move other files to the external HD rather than downloading the update file to the external HD.
    First try going here and delete any update files to regain C drive space.
    IPSW file location for Mac and Windows
    Also, make sure that you have emptied your computer's recycle bin
    You can try the manual update/restore method included here and download the file to the external HD

  • I have an idea for a new feature of the calendar app on a new software version. Does anyone know how to contact Apple to let them know the idea?

    I have an idea for a new convenient feature of the calendar app on a new software version. Does anyone know how to contact Apple to let them know the idea?

    First see here  >  http://www.apple.com/legal/policies/ideas.html
    You can leave Feedback here  >  http://www.apple.com/feedback/

  • 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

    Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
    Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

    Exactly the same problem with me.
    Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
    What I did not try yet, was to move the Render files out of the malicious library to trash.

  • HT4623 i am trying to update my Ipad 1 but it tells me i have no updates available under my general settings. i talked to someone on the phone yesterday and they said my software version is 2 updates behind.  i paid for some aps and they will not open wit

    i am trying to update my Ipad 1 but it tells me i have no updates available under my general settings. i talked to someone on the phone yesterday and they said my software version is 2 updates behind.  i paid for some aps and they will not open with my cu

    You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

Maybe you are looking for